The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
The State of the Art of Material Jetting—A Critical Review
Open accessAbstract
Material jetting (MJ) technology is an additive manufacturing method that selectively cures liquid photopolymer to build functional parts. The use of MJ technology has increased in popularity and been adapted by different industries, ranging from biomedicine and dentistry to manufacturing and aviation, thanks to its advantages in printing parts with high dimensional accuracy and low surface roughness. To better understand the MJ technology, it is essential to address the capabilities, applications and the usage areas of MJ. Additionally, the comparison of MJ with alternative methods and its limitations need to be explained. Moreover, the parameters influencing the dimensional accuracy and mechanical properties of MJ printed parts should be stated. This paper aims to review these critical aspects of MJ manufacturing altogether to provide an overall insight into the state of the art of MJ.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
Photo-curing 3D printing technique and its challenges
Quan, H., Zhang, T., Xu, H., Luo, S., Nie, J., & Zhu, X. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.003 · Cited by 1,106
Review of additive manufacturing technologies and applications in the aerospace industry
Najmon, J. C., Raeisi, S., & Tovar, A. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00002-9 · Cited by 719
Additive manufacturing technologies: state of the art and trends
Gardan, J. (2016) · International Journal of Production Research · doi:10.1080/00207543.2015.1115909 · Cited by 489
Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
Goh, G. D., Agarwala, S., Goh, G. L., Dikshit, V., Sing, S. L., & Yeong, W. Y. (2017) · Aerospace Science and Technology · doi:10.1016/j.ast.2016.12.019 · Cited by 413
Hierarchically Enhanced Impact Resistance of Bioinspired Composites
Gu, G. X., Takaffoli, M., & Buehler, M. J. (2017) · Advanced Materials · doi:10.1002/adma.201700060 · Cited by 396
3D-printed upper limb prostheses: a review
ten Kate, J., Smit, G., & Breedveld, P. (2017) · Disability and Rehabilitation: Assistive Technology · doi:10.1080/17483107.2016.1253117 · Cited by 374
Accuracy of medical models made by additive manufacturing (rapid manufacturing)
Salmi, M., Paloheimo, K.-S., Tuomi, J., Wolff, J., & Mäkitie, A. (2013) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2012.11.041 · Cited by 330
Inkjet Printing of Highly Loaded Particulate Suspensions
Derby, B., & Reis, N. (2003) · MRS Bulletin · doi:10.1557/mrs2003.230 · Cited by 327
Kim, S., Shin, Y., Jung, H.-D., Hwang, C., Baik, H.-S., & Cha, J. (2017) · American Journal of Orthodontics and Dentofacial Orthopedics · doi:10.1016/j.ajodo.2017.05.025 · Cited by 327
Ibrahim, D., Broilo, T. L., Heitz, C., de Oliveira, M. G., de Oliveira, H. W., Nobre, S. M. W., dos Santos Filho, J. H. G., & Silva, D. N. (2009) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2008.10.008 · Cited by 285
Designable dual-material auxetic metamaterials using three-dimensional printing
Wang, K., Chang, Y.-H., Chen, Y., Zhang, C., & Wang, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2014.11.033 · Cited by 268
The application of 3D printing technology in the fashion industry
Vanderploeg, A., Lee, S.-E., & Mamp, M. (2017) · International Journal of Fashion Design, Technology and Education · doi:10.1080/17543266.2016.1223355 · Cited by 260
Kim, G. D., & Oh, Y. T. (2008) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem724 · Cited by 238
Yap, Y. L., Wang, C., Sing, S. L., Dikshit, V., Yeong, W. Y., & Wei, J. (2017) · Precision Engineering · doi:10.1016/j.precisioneng.2017.05.015 · Cited by 228
Measuring UV curing parameters of commercial photopolymers used in additive manufacturing
Bennett, J. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.009 · Cited by 206
Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication
Ko, S. H., Chung, J., Hotz, N., Nam, K. H., & Grigoropoulos, C. P. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/12/125010 · Cited by 183
Biomimetic additive manufactured polymer composites for improved impact resistance
Gu, G. X., Takaffoli, M., Hsieh, A. J., & Buehler, M. J. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.006 · Cited by 180
All-polymer capacitor fabricated with inkjet printing technique
Liu, Y., Cui, T., & Varahramyan, K. (2003) · Solid-State Electronics · doi:10.1016/s0038-1101(03)00082-0 · Cited by 162
Camardella, L. T., Vilella, O. D. V., & Breuning, H. (2017) · American Journal of Orthodontics and Dentofacial Orthopedics · doi:10.1016/j.ajodo.2017.03.012 · Cited by 157
A review on additive manufacturing and its way into the oil and gas industry
Sireesha, M., Lee, J., Kiran, A. S., Babu, V. J., Kee, B. B. T., & Ramakrishna, S. (2018) · RSC Advances · doi:10.1039/c8ra03194k · Cited by 147
PolyJet technology for product prototyping: Tensile strength and surface roughness properties
Cazón, A., Camo, P. M., & Matey, L. (2014) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405413518515 · Cited by 143
Elastic measurements on macroscopic three-dimensional pentamode metamaterials
Schittny, R., Bückmann, T., Kadic, M., & Wegener, M. (2013) · Applied Physics Letters · doi:10.1063/1.4838663 · Cited by 128
Modelling for randomly oriented multi material additive manufacturing component and its fabrication
Sugavaneswaran, M., & Arumaikkannu, G. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.102 · Cited by 106
3D Printing of polymer composites with material jetting: Mechanical and fractographic analysis
Tee, Y. L., Tran, P., Leary, M., Pille, P., & Brandt, M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101558 · Cited by 101
Implications of lattice structures on economics and productivity of metal powder bed fusion
Ituarte, I. F., Kretzschmar, N., Azman, A. H., Chekurov, S., Pedersen, D. B., & Chaudhuri, A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100947 · Cited by 98
Udroiu, R., Braga, I. C., & Nedelcu, A. (2019) · Materials · doi:10.3390/ma12060995 · Cited by 97
Accuracy of a simplified 3D-printed implant surgical guide
Kim, T., Lee, S., Kim, G. B., Hong, D., Kwon, J., Park, J., & Kim, N. (2019) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2019.06.006 · Cited by 96
Shape recovery effect of 3D printed polymeric honeycomb
Yap, Y. L., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1060350 · Cited by 94
Auxetic metamaterial simplifies soft robot design
Mark, A. G., Palagi, S., Qiu, T., & Fischer, P. (2016) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2016.7487701 · Cited by 92
Tan, W. S., Suwarno, S. R., An, J., Chua, C. K., Fane, A. G., & Chong, T. H. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.05.037 · Cited by 87
On the adoption of additive manufacturing in healthcare: a literature review
Ramola, M., Yadav, V., & Jain, R. (2018) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-03-2018-0094 · Cited by 85
Comparative study of rapid and conventional tooling for plastics injection molding
Mendible, G. A., Rulander, J. A., & Johnston, S. P. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2016-0013 · Cited by 84
An experimental and theoretical investigation of surface roughness of poly-jet printed parts
Kumar, K. V. N. G., & Kumar, G. S. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.999218 · Cited by 73
Budzik, G., Woźniak, J., Paszkiewicz, A., Przeszłowski, Ł., Dziubek, T., & Dębski, M. (2021) · Materials · doi:10.3390/ma14092202 · Cited by 73
Sugavaneswaran, M., & Arumaikkannu, G. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.10.029 · Cited by 72
Emir, F., & Ayyıldız, S. (2020) · Journal of Prosthodontic Research · doi:10.2186/jpr.jpor_2019_579 · Cited by 71
Friction and wear of additive manufactured polymers in dry contact
Dangnan, F., Espejo, C., Liskiewicz, T. W., Gester, M., & Neville, A. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.09.051 · Cited by 69
Wesemann, C., Spies, B. C., Schaefer, D., Adali, U., Beuer, F., & Pieralli, S. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.104179 · Cited by 59
Jabari, E., Liravi, F., Davoodi, E., Lin, L., & Toyserkani, E. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101330 · Cited by 56
Dilag, J., Chen, T., Li, S., & Bateman, S. A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.01.009 · Cited by 55
Design and Fabrication Challenges for Millimeter-Scale Three-Dimensional Phononic Crystals
Lucklum, F., & Vellekoop, M. J. (2017) · Crystals · doi:10.3390/cryst7110348 · Cited by 50
Additive manufacturing of titanium and titanium alloys for biomedical applications
Avila, J. D., Bose, S., & Bandyopadhyay, A. K. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-812456-7.00015-9 · Cited by 47
Gupta, V., Mahbub, P., Nesterenko, P. N., & Paull, B. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2017.12.039 · Cited by 42
Kaweesa, D. V., & Meisel, N. A. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.03.011 · Cited by 37
Length-scale dependency of biomimetic hard-soft composites
Mirzaali, M. J., Edens, M., de la Nava, A. H., Janbaz, S., Vena, P., Doubrovski, E. L., & ZADPOOR, A. A. (2018) · Scientific Reports · doi:10.1038/s41598-018-30012-9 · Cited by 36
Maurya, N. K., Rastogi, V., & Singh, P. (2019) · Instrumentation Mesure Métrologie · doi:10.18280/i2m.180404 · Cited by 36
Turek, P., Budzik, G., Sęp, J., Oleksy, M., Jóźwik, J., Przeszłowski, Ł., Paszkiewicz, A., Kochmański, Ł., & Żelechowski, D. (2020) · Polymers · doi:10.3390/polym12123029 · Cited by 36
Additive Assembly for PolyJet-Based Multi-Material 3D Printed Microfluidics
Childs, E., Latchman, A. V., Lamont, A. C., et al. (2020) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2020.3003858 · Cited by 31
Balavandy, S. K., Li, F., Macdonald, N. P., Maya, F., Townsend, A. T., Frederick, K. A., Guijt, R. M., & Breadmore, M. C. (2020) · Analytica Chimica Acta · doi:10.1016/j.aca.2020.11.033 · Cited by 31
On the Impact of the Fabrication Method on the Performance of 3D Printed Mixers
Zeraatkar, M., Filippini, D., & Percoco, G. (2019) · Micromachines · doi:10.3390/mi10050298 · Cited by 27
Problems of determination of MultiJet 3D printing distortions using a 3D scanner
Nowacki, J. P., & Sieczkiewicz, N. (2020) · Archives of Materials Science and Engineering · doi:10.5604/01.3001.0014.1771 · Cited by 12
In vitro accuracies of 3D printed models manufactured by two different printing technologies
Emir, F., Ceylan, G., & Ayyıldız, S. (2021) · European Oral Research · doi:10.26650/eor.20210060 · Cited by 12
Physical integrity of 3D printed parts for use as embossing tools
O’Neill, P., Jolivet, L., Kent, N. J., et al. (2017) · Advances in Materials and Processing Technologies · doi:10.1080/2374068x.2017.1330842 · Cited by 11
Assessment of the Dimensional and Geometric Precision of Micro-Details Produced by Material Jetting
Silva, M. R., Pereira, A. M., Sampaio, Á. M. D. C. G. O., & Pontes, A. J. (2021) · Materials · doi:10.3390/ma14081989 · Cited by 11
RAPID MANUFACTURING BY POLYJET TECHNOLOGY OF CUSTOMIZED TURBINES FOR RENEWABLE ENERGY GENERATION
Udroiu, R., Nedelcu, A., & Deaky, B. (2011) · Environmental Engineering and Management Journal · doi:10.30638/eemj.2011.197 · Cited by 5
Cited by
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
A systematic review of digital transformation technologies in museum exhibition
Li, J., Zheng, X., Watanabe, I., & Ochiai, Y. (2024) · Computers in Human Behavior · doi:10.1016/j.chb.2024.108407 · Cited by 136
Review of High-Performance Sustainable Polymers in Additive Manufacturing
Chyr, G., & DeSimone, J. M. (2023) · Green Chemistry · doi:10.1039/d2gc03474c · Cited by 136
Mahmood, M. A., Chioibasu, D., Ur Rehman, A., Mihai, S., & Popescu, A. C. (2022) · Metals · doi:10.3390/met12010077 · Cited by 119
Metadata
- Authors
- Gülcan, O., Günaydın, K., & Tamer, A.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-08-23
- Volume
- 13
- Issue
- 16
- Pages
- 2829
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3194799905
- Cited by
- 301
- References
- 58
- FWCI
- 13.07
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.