Challenges in Multiscale Modeling of Polymer Dynamics
Open accessThe DOI matches its Crossref record; 412 of the 437 references it cites were found in a registry or an index; 53 of the 367 sources its claims cite were checked for support.
Abstract
The mechanical and physical properties of polymeric materials originate from the interplay of phenomena at different spatial and temporal scales. As such, it is necessary to adopt multiscale techniques when modeling polymeric materials in order to account for all important mechanisms. Over the past two decades, a number of different multiscale computational techniques have been developed that can be divided into three categories: (i) coarse-graining methods for generic polymers; (ii) systematic coarse-graining methods and (iii) multiple-scale-bridging methods. In this work, we discuss and compare eleven different multiscale computational techniques falling under these categories and assess them critically according to their ability to provide a rigorous link between polymer chemistry and rheological material properties. For each technique, the fundamental ideas and equations are introduced, and the most important results or predictions are shown and discussed. On the one hand, this review provides a comprehensive tutorial on multiscale computational techniques, which will be of interest to readers newly entering this field; on the other, it presents a critical discussion of the future opportunities and key challenges in the multiscale modeling of polymeric materials and how these methods can help us to optimize and design new polymeric materials.
Overview
CoChat Summary
TL;DR
This review categorizes and compares eleven multiscale computational techniques for polymer dynamics into three groups: coarse-graining for generic polymers, systematic coarse-graining, and multiple-scale-bridging methods. It assesses their ability to link polymer chemistry to rheological properties and discusses key challenges and future opportunities.
Key findings
- The review divides methods into (i) coarse-graining for generic polymers, (ii) systematic coarse-graining (IBI, blob, super coarse-graining), and (iii) multiple-scale-bridging methods (dynamic mapping onto the tube model, molecularly-derived constitutive equation, concurrent modeling, hierarchical modeling).
- Reported speedups versus all-atomistic simulations are about 10²× for IBI, 10³–10⁴× for the blob model, and roughly 10⁶× for super coarse-graining; the hierarchical framework predicts cis-PI storage and loss moduli over 10⁻⁴ to 10⁶ rad s⁻¹.
- Specific validations include FENE chains reproducing η₀ ∼ N and η₀ ∼ N³ for unentangled and entangled chains, with intermediate η₀ ∼ N³·⁴; BFM giving D_cm ∼ N⁻²·⁰⁸ with entanglements versus D_cm ∼ N⁻¹ without; blob-model PE giving D_cm ∼ N⁻² and η₀ ∼ N³·⁶; and slip-link inclusion of constraint release reducing η₀ by a factor of 3/5.
- Dynamic mapping onto the tube model shows the double reptation model overestimates and the dual constraint model underestimates Ψ(t) relative to direct primitive-path analysis; the hierarchical model with the Mittag-Leffler exponent α captures polydisperse PE and HPB relaxation.
Methods
- Design: critical review and tutorial comparing eleven multiscale computational techniques, organized into three categories, with fundamental ideas, equations, and key results for each.
- Scope/data: focuses on viscoelasticity and rheology of polymer melts and homopolymers; excludes self-consistent field theory and ab initio/DFT-to-classical bridging, and only briefly mentions polymer mixtures.
- Analysis: qualitative and quantitative comparison using literature results and illustrative simulations; tables compare approachable temporal and spatial scales, predictable properties, and acceleration.
Limitations
- Stated: the review is limited to viscoelasticity of polymer melts and homopolymers; polymer mixtures are only briefly mentioned, and self-consistent field theory and ab initio/DFT bridging are excluded.
- Stated: many methods remain limited to generic models or simple polymers/short chains; there is no direct mapping from BFM or FENE to the slip-link model; time-scaling/dynamical heterogeneity, transferability, thermodynamic consistency, and loss of internal degrees in coarse-graining remain challenges; rheological properties of the analytical super coarse-grained model have not been reported.
- Evident: as a review, it synthesizes prior work rather than presenting new primary experimental data, and its comparisons rely on cited simulations and experiments.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Depiction of ( a ) the bond-fluctuation model and ( b ) mean-squared displacements for a self-avoiding walk with N = 200 steps. Part ( b ) reproduced with permission from [94].](https://figures.cochat.ai/paper-figures/f9bab6e5c8764d65a6a96965c5d1b7b1/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-2.png)

![Figure 4 Results of ( a ) self-diffusion coefficient and ( b ) zero-rate shear viscosity of finite-extensible non-linear elastic (FENE) chains. In ( a ), the scaled diffusion coefficient, D ( N ) /D R ( N ) , is plotted against the scaled chain length, N/N e,p , for polystyrene (closed circles N e,p = 140 and T = 485 K [111]), polyethylene (closed squares N e,p = 31 and T = 448 K [112]), hydrogenated polybutadiene (closed triangles N e,p = 18 and T = 448 K [113]), FENE (open triangles N e,p = 72 [105]), bond-fluctuation model (BFM) (open squares Φ = 0 . 5 [94]) and tangent hard spheres (open circles Φ = 0 . 45 [114]). In ( b ), the data are reproduced with permission from [106].](https://figures.cochat.ai/paper-figures/3a87b70a09824152aa8f45db7162c063/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-4.png)
![Figure 5 Illustrations for ( a ) the slip-link model and ( b ) shear relaxation moduli G ( t ) given by different models. Figures reproduced with permission from [80].](https://figures.cochat.ai/paper-figures/ddb80b58cf9c4898baa253b553a221a3/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-5.png)

![Figure 7 Workflow chart for the Iterative Boltzmann Inversion (IBI) method. The figure is taken and modified from [174].](https://figures.cochat.ai/paper-figures/c18aa7704c6f463e8ed913426fbf3315/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-7.png)
![Figure 8 Distribution functions for ( a ) bond length; ( b ) bond angle; ( c ) dihedral angle; and ( d ) pair distance of all atomistic (solid lines) and coarse-grained (dots) models of cis -polyisoprene (PI) melts at 413 K. Figure reproduced with permission from [92].](https://figures.cochat.ai/paper-figures/f0bfebf1ed004fb2ab1642f7580e4699/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-8.png)
![Figure 9 Optimized potential functions for ( a ) bond; ( b ) angle; ( c ) dihedral and ( d ) pair interactions of coarse-grained cis -PI melts at 413 K. Figure reproduced with permission from [92].](https://figures.cochat.ai/paper-figures/c1da607dfa494f1b8160de6a9450f1ea/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-9.png)

![Figure 11 Different definitions for the super atoms of coarse-grained polystyrene (PS): ( a ) [195-197]; ( b ) [185,200]; ( c ) [69]; and ( d ) [188,201].](https://figures.cochat.ai/paper-figures/624546b4f68a4dca906db98ebda7d584/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-11.png)
![Figure 12 ( a ) Autocorrelation function of end-to-end unit vector, 〈 R ( t ) · R (0) 〉 , and ( b ) mean-squared displacement g 3 ( t ) versus time for both united-atom (dots) and coarse-grained (lines) PS melts at 463 K; ( c ) 〈 R ( t ) · R (0) 〉 and ( d ) mean-squared displacement, g 1 ( t ) , versus time for both all-atomistic and coarse-grained cis-PI melts at 413 K. The time of the coarse-grained simulation has been rescaled by a factor of 11.47 in ( c ) and ( d ). Figures reproduced with permission from [92,204].](https://figures.cochat.ai/paper-figures/b2c05d1f69c84d98bdc5f44f11788762/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-12.png)
![Figure 13 Illustrations for ( a ) the blob model and ( b ) potential functions for bonded ( U b , squares) and non-bonded ( U nb , circles) interactions. In ( b ), the scattered data are taken from [85]. The solid lines are fitted with Equations (13) and (14).](https://figures.cochat.ai/paper-figures/29c08cca39b8456390527e8b9d0c5cba/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-13.png)
![Figure 14 ( a ) Self-diffusion coefficient, D cm , and ( b ) zero-rate shear viscosity, η 0 , for PE melts at 450 K. The experimental data are given by Pearson et al. [251]. The MD data are given by Mondello et al. [2], Padding et al. [85] and Paul et al. [252].](https://figures.cochat.ai/paper-figures/5e4847c88a2c4f6aadeaad6b198bcf11/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-14.png)
![Figure 15 ( a ) Storage, G ′ , and loss, G ′′ , moduli and ( b ) the flow curve, viscosity, η , versus shear rate, ˙ γ , for PE (C 800 H 1602 ) at 450 K. In ( a ), the slope of the straight, solid line is ≈ -0.25. In ( b ), the solid curve is extracted from the equilibrium simulations, according to the Cox-Merz rule, while the circles and squares are measured in shear simulations through linear background and variable flow field, respectively. Figures reproduced with permission from [86].](https://figures.cochat.ai/paper-figures/d6ee0913611e4cfbbf9f6b48aab5d7f3/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-15.png)
![Figure 16 Center of mass self-diffusion coefficient, D cm , for ( a ) polyethylene (PE) and ( b ) cis-1,4-PB polymer melts. In ( a ), the downward and upward triangles denote 400 K and 509 K, respectively. Unfilled circles are experimental results at 509 K. In ( b ), filled and unfilled symbols are data from united-atom and super coarse-grained simulations, respectively. Figure a , b are reproduced with permission from [218,272], respectively.](https://figures.cochat.ai/paper-figures/cd2c089d0a8a4579aa117c91d35e9656/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-16.png)
![Figure 17 Schematic of tube construction around the primitive path (PP) of a polymer chain to calculate function, ψ ( s, t ) . Figure reproduced with permission from [89].](https://figures.cochat.ai/paper-figures/b3e564553cfa4952843ba0ac8b67ceeb/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-17.png)

![Figure 19 Results of ( a ) tube survivability function, Ψ( t ) ; ( b ) zero-rate shear viscosity, η 0 ; ( c ) storage, G ′ ( ω ) , modulus; and ( d ) loss, G ′′ ( ω ) , modulus of PE (C 500 H 1002 ) polymer melts at 450 K. In ( a ), ( c ) and ( d ), the double reptation and dual constraint models are given by [295,296] and [297,298], respectively. In ( b ), the unfilled symbols are given by experiments. Figures reproduced with permission from [89].](https://figures.cochat.ai/paper-figures/be2af46acacc43959cf2da8b74d442e7/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-19.png)

![Figure 21 Description of the setup of the concurrent multiscale modeling method. The stresses calculated from MD simulations are passed into continuum simulation, while the velocity profile obtained from continuum simulations is used for the next set of MD simulations. Figure reproduced with permission from [91].](https://figures.cochat.ai/paper-figures/6db609cb1f5b4adb802fba7fae0e20b1/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-21.png)
![Figure 22 The velocity profiles for the FENE system with thickness, 282 σ , at different time steps. The small hollow and filled squares are given by the direct MD and concurrent multiscale simulations, respectively. The broken line is from the steady-state constitutive equation. The hollow diamonds are obtained from the concurrent multiscale simulations with equilibrated configurations freshly generated at each time. Figure reproduced with permission from [91].](https://figures.cochat.ai/paper-figures/828d189d9f434e16ab393b2804514467/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-22.png)
![Figure 23 Hierarchical multiscale computational framework adopted to predict the viscoelastic properties of polymers. Different time and length scales are connected through different bridging laws. Figure reproduced with permission from [92].](https://figures.cochat.ai/paper-figures/c54c1b921a37413dbbc75183935f14e5/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-23.png)
![Figure 24 ( a ) Storage, G ′ ; and ( b ) loss, G ′′ , moduli of cis-PI polymers with different molecular weights. The solid lines are given by the hierarchical multiscale computational framework. The dots are experimental results taken from [332]. Figure reproduced with permission from [92].](https://figures.cochat.ai/paper-figures/8927b8c1440f47e7b1e41fd1cf1e435d/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-24.png)

![Figure 26 Normalized viscoelastic relaxation of various PE polymers at 463 K: ( a ) HPB TM and ( b ) PE. In ( a ), the dots are experimental results [334]. The solid and dash lines are given by the hierarchical method with α = 0 . 7 and 1.0 when t > τ d , respectively. In ( b ), the dots are experimental results [335]. The solid and dashed lines are from the hierarchical method with α = 0 . 3 and 1.0 when t > τ d , respectively. Figure reproduced with permission from [92].](https://figures.cochat.ai/paper-figures/459ad3d1496b49dd83afc1ff386422eb/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-26.png)

![Figure 28 Strain amplification in filled elastomers under tension: ( a ) experimental and ( b ) computational results. The green/yellow and red colors in ( a ) and ( b ), respectively, correspond to high strain localization regions. Parts ( a ) and ( b ) reproduced with permission from [32,398], respectively.](https://figures.cochat.ai/paper-figures/4150c9be289344efaabeb172b9caad1f/challenges-in-multiscale-modeling-of-polymer-dynamics-figure-28.png)
Verification
Claims the paper makes
37 Valid · 24 Not valid · 201 Not checked · 242 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“Such a linear, attractive tail function has been demonstrated to recover the correct pressure for coarse-grained polymer systems [83,211,212,239,240].”
§ Challenges in Multiscale Modeling of Polymer Dynamics > 4.1.4. Transferability and Thermodynamic Consistency
What the sources say
- Disputedcites [83] Meyer, 2000, Coarse graining of nonbonded inter-particle potentials using automatic simplex optimization to fit structural properties, J. Chem. Phys. sourceExperimental — accuracy not yet measured
The Isoprene Pseudo Monomers section (p. 11) reports that the coarse-grained model's pressure was about twice that of its reference system, not that it recovered the correct pressure. The Discussion and Conclusion (p. 14) says pressure could be added as a target observable for future transferability and that polymer force-field optimization was still in progress. Our copy does not describe a linear attractive tail that corrects pressure in a polymer system. (LLM, conf=0.87)
Checked by a reasoning model — may be wrong.
- Not checked — no full text of the sourcecites [211] Reith, 2002, CG-OPT: A software package for automatic force field design, Comput. Phys. Commun. source
- Not checked — no full text of the sourcecites [212] Reith, 2003, Deriving effective mesoscale potentials from atomistic simulations, J. Comput. Chem. source
- Not checked — no full text of the sourcecites [239] Eslami, 2011, Coarse-grained computer simulation of nanoconfined polyamide-6, 6, Macromolecules source
- Not checked — no full text of the sourcecites [240] Bayramoglu, 2012, Coarse-grained modeling of polystyrene in various environments by iterative Boltzmann inversion, Macromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“In fact, G ∼ ω 1/4 in the intermediate range, due to the combined effects of reptation and CLF.”
§ Challenges in Multiscale Modeling of Polymer Dynamics > 5.4. Hierarchical Modeling of Polymer Rheology
What the sources say
- Not checked — no full text of the sourcecites [14] Likhtman, 2002, Quantitative theory for linear dynamics of linear entangled polymers, Macromolecules source
- Disputedcites [331] Milner, 1998, Reptation and contour-length fluctuations in melts of linear polymers, Phys. Rev. Lett. sourceExperimental — accuracy not yet measured
On p. 4, the paper assigns the intermediate-frequency ω^1/4 power law to the loss modulus G″, arising from contour-length fluctuations. It says the reptation contribution instead leads to a plateau in the storage modulus G′ at higher frequencies, contrary to the claim about G′. (LLM, conf=0.88)
Checked by a reasoning model — may be wrong.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“These phenomena have also been observed both in molecular dynamics (MD) simulations [2,3] and experiments [4].”
§ Challenges in Multiscale Modeling of Polymer Dynamics > 1. Introduction
What the sources say
- Supportedcites [2] Mondello, 1998, Dynamics of n-alkanes: Comparison to Rouse model, J. Chem. Phys. source
The Introduction (p. 2) reports Rouse-predicted scaling of self-diffusion and viscosity in experiments and says simulations reproduce the chain-length scaling. This paper supports the MD portion of the citing sentence; its Conclusions (p. 13) qualify its own n-alkane results as a crossover to Rouse-like behavior, rather than scaling across all chain lengths. The experiments in the citing sentence carry a separate citation. (LLM, conf=0.86)
- Not checked — no full text of the sourcecites [3] Harmandaris, 2002, Detailed molecular dynamics simulation of the self-diffusion of n-alkane and cis-1, 4 polyisoprene oligomer melts, J. Chem. Phys. source
- Not checked — no full text of the sourcecites [4] Fleischer, 1995, Chain length and temperature dependence of the self-diffusion of polyisoprene and polybutadiene in the melt, Macromolecules source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“Pütz et al. [105] studied the dynamic scattering factor, S(q), of entangled polymer chains and found that the S(q) of highly entangled polymer chains (N = 10, 000) can be well characterized by the tube model [5,107].”
§ Challenges in Multiscale Modeling of Polymer Dynamics > 3.2. FENE Model
What the sources say
- Supportedcites [105] Kremer, 2000, What is the entanglement length in a polymer melt?, EPL (Europhys. Lett.) source
The paper reports fitting the dynamic single-chain structure function S(k,t) to a tube-model expression for chains including N = 10000. On p. 3, it says the agreement is acceptable for N = 10000, supporting the claim about highly entangled chains. (LLM, conf=0.91)
- Not checked — no full text of the sourcecites [5] De Gennes, P.G. (1979). Scaling Concepts in Polymer Physics, Cornell University Press. source
- Not checked — no full text of the sourcecites [107] Kremer, 1984, Dynamics of polymer chains confined into tubes: Scaling theory and Monte Carlo simulations, J. Chem. Phys. source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“From the above equation, it is clear that the derived coarse-grained potential function, U (R N ), is not a conventional potential energy function [82,83,176,177].”
§ Challenges in Multiscale Modeling of Polymer Dynamics > 4.1. Iterative Boltzmann Inversion Method
What the sources say
- Not checked — no full text of the sourcecites [82] Kremer, 1998, Simulation of polymer melts. I. Coarse-graining procedure for polycarbonates, Acta Polym. doi:10.1002/(sici)1521-4044(199802)49:2/3<61::aid-apol61>3.0.co;2-v
- Partly supportedcites [83] Meyer, 2000, Coarse graining of nonbonded inter-particle potentials using automatic simplex optimization to fit structural properties, J. Chem. Phys. sourceExperimental — accuracy not yet measured
In “Discussion and Conclusion” (p. 13), the paper says its piecewise coarse-grained potential lacks a theoretical interpretation beyond that of a numerical potential. That supports distinguishing it from a conventional physically interpreted potential, but the paper does not state that a derived U(R^N) is not a conventional potential energy function. (LLM, conf=0.76)
- Not checked — no full text of the sourcecites [176] Kremer, 1998, Simulation of polymer melts. II. From coarse-grained models back to atomistic description, Acta Polym. source
- Not matchedcites [177] Kremer, 1999, Simulation of polymer melts. I. Coarse-graining procedure for polycarbonates, Acta Polym.
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
312 more claims · 24 with their cited sources checked
Create a free account to see all 504 claims and to verify the 8 references still open.
- It may state two separate claims as one. 107
- Probably not a substantial claim. 98
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ Challenges in Multiscale Modeling of Polymer Dynamics > 4.1.1. Definition of Super Atom
“One is the center of the PI monomer, and the other is the center of the carbon-carbon bond connecting two monomers together.The distribution functions, p R (l), for both of these definitions have been obtained (Figure 10).In the first case, p R (l) is characterized well by a single Gaussian”
§ Challenges in Multiscale Modeling of Polymer Dynamics > 4.1.1. Definition of Super Atom
“if the super-atomic center is defined as the center of mass of the cis-PI monomer (i.e., the carbon-carbon double bond), the p R (l) will have two peaks”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Challenges in Multiscale Modeling of Polymer Dynamics > 3.3. Slip-Link Model
“the G(t) given by the Doi-Edwards model decays very quickly, compared with the slip-link model, since the Doi-Edwards model only considers reptation, whereas the slip-link model contains other relaxation mechanisms, i.e., the chain fluctuation and constraint release.”
§ Challenges in Multiscale Modeling of Polymer Dynamics > 1. Introduction
“Thus, CR is a cooperative phenomenon between different chains, while CLF can be considered as a single-chain phenomenon, but both hasten the relaxation process.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Challenges in Multiscale Modeling of Polymer Dynamics > 5.3. Concurrent Modeling of Polymer Melts under Shear Flow
“Equations ( 35) and ( 36) are for the fine scale (MD), scale bridging (modified virial stress) and the coarse scale (continuum), respectively.”
§ Challenges in Multiscale Modeling of Polymer Dynamics > 5.3. Concurrent Modeling of Polymer Melts under Shear Flow
“mq (x ζ ) -f (x ζ ) = 0 for x ζ ∈ Θ ζ (35 ) ρü(x ζ ) -∇ • σ(x ζ ) = 0 for x ζ ∈ Ω (36 ) σ(x ζ ) = 1 2Θ ζ A B =A r AB ζ (x ζ ) ⊗ f AB ζ (x ζ )(37)”
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721 · cited 2×
“To date, there is support for tabulated forms for all the potential functions, including pair, bond, angle and dihedral interactions, in the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) [209].”
BackgroundViscoelastic Properties of Polymers
Ferry, J. D., & Myers, H. S. (1961) · Journal of The Electrochemical Society · doi:10.1149/1.2428174 · Cited by 13,487
An Introduction to Fluid Dynamics
Batchelor, G. K. (2000) · doi:10.1017/cbo9780511800955 · Cited by 12,360
The theory of polymer dynamics
Doi, M., & Edwards, S. F. (1986) · Cited by 12,024
Scaling Concepts in Polymer Physics
de Gennes, P. G., & Witten, T. A. (1980) · Physics Today · doi:10.1063/1.2914118 · Cited by 9,348 · cited 8×
“According to the tube model [5,6], assumed to describe the motion of these free chains, the viscous Cauchy stress can be formulated as [32]:”
BackgroundInfluentialHansen, J. P., McDonald, I. R., & Henderson, D. J. (1976) · Cited by 8,464
Sun, H. (1998) · The Journal of Physical Chemistry B · doi:10.1021/jp980939v · Cited by 6,001 · cited 1×
“The ab initio force field COMPASS [180] was used for the all-atomistic simulations.”
MethodEmerging applications of stimuli-responsive polymer materials
Stuart, M. A. C., Huck, W. T. S., Genzer, J., Müller, M., Ober, C., Stamm, M., Sukhorukov, G. B., Szleifer, I., Tsukruk, V. V., Urban, M., et al. (2010) · Nature Materials · doi:10.1038/nmat2614 · Cited by 5,707 · cited 1×
“number of important applications were newly added in the recent past, including block copolymers and nanocomposites [53]; screening effects in polyelectrolyte brushes [54]; mixed polymer brushes [55]; harvesting cells cultured on thermoresponsive polymer brushes [56,57]; morphology control of hairy”
BackgroundRole of repulsive forces in determining the equilibrium structure of simple liquids
Weeks, J. D., Chandler, D., & Andersen, H. C. (1971) · The Journal of Chemical Physics · doi:10.1063/1.1674820 · Cited by 5,207 · cited 1×
“For dense polymeric systems, all the beads interact with each other through the Weeks-Chandler-Andersen (WCA) potential [103], which is a Lennard-Jones potential cut off at its minimum and shifted to zero.”
BackgroundBird, R. B. (1977) · Medical Entomology and Zoology · Cited by 4,951
Research works printed but not linked: 12
- Likhtman, A.E. (2011). Comprehensive Polymer Science, Elsevier.
- Holm, 2009, Advanced computer simulation approaches for soft matter sciences III, Adv. Polym. Sci., 221, 1
- Müller, M., and Schmid, F. (2005). Advanced Computer Simulation Approaches for Soft Matter Sciences II, Springer.
- Kremer, 1998, Simulation of polymer melts. II. From coarse-grained models back to atomistic description, Acta Polym., 49, 75, 10.1002/(sici)1521-4044(199802)49:2/3 · doi:10.1002/(sici)1521-4044(199802)49:2/3
- Kremer, 1999, Simulation of polymer melts. I. Coarse-graining procedure for polycarbonates, Acta Polym., 49, 61
- Karimi-Varzaneh, H., and Müller-Plathe, F. (2012). Multiscale Molecular Methods in Applied Chemistry, Springer.
- Savin, 2013, Thermodynamic formulation of flowing soft matter with transient forces, Rheol. Acta, 52, 23, 10.1007/s00397-012-0661-7 · DOI · Paper page
- 2002, Projection from an atomistic chain contour to its primitive path, Polymer, 43, 477, 10.1016/s0032-3861(01)00422-0 · DOI · Paper page
- Ilg, P., Mavrantzas, V.G., and Öttinger, H.C. (2010). Modeling and Simulations in Polymers, Wiley-VCH.
- Kremer, 1999, Simulation of polymer melts. II. From coarse-grained models back to atomistic description, Acta Polym., 49, 75
- Succi, S. (2001). Numerical Mathematics and Scientific Computation, Oxford University Press.
- Harmandaris, 2005, Molecular dynamics simulation of a polymer melt/solid interface: Local dynamics and chain mobility in a thin film of polyethylene melt adsorbed on graphite, Macromolecules, 38, 5796, 10.1021/ma050177j · DOI · Paper page
Cited by
Items 201–227 of 227
Chen, G., Tao, L., Kröger, M., & Li, Y. (2022) · Journal of Micromechanics and Molecular Physics · doi:10.1142/s2424913022500011 · Cited by 1
Self-citationWang, Y., Mou, X., Ji, Y., Pan, F., & Li, S. (2023) · Molecules · doi:10.3390/molecules28155790 · Cited by 1
“In the phospholipid membrane model, shown in Figure 1, we represent the hydrophilic and hydrophobic tail chains with pink and blue beads, respectively [76,77].”
BackgroundMultiscale simulations of star polymer melts
Liu, L. (2014) · doi:10.3990/1.9789036536868 · Cited by 1
“This is not only due to computational limitations, but also results from the physicists wish to develop concepts and understanding on the basis of minimalistic models [41, 115].”
BackgroundFiber damage mechanisms in multi-die pultrusion of thermoplastic CF prepreg filaments
Yu, Y., Lai, Z., Deng, Z., et al. (2026) · Journal of Reinforced Plastics and Composites · doi:10.1177/07316844261472932
Topological Effects of Bottlebrush Copolymer on Their Assembly at the Water/Air Interface
Nag, S., Islam, N., Oluwole, T. D., et al. (2026) · Langmuir · doi:10.1021/acs.langmuir.6c00890
Ren, R., Wang, B., Chen, S., Liu, L., Jiang, R., Xu, F., Weng, Y., & Hou, G. (2026) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.6c00206
A Multi-scale Framework for the Prediction of the Elastic Properties of Nanocomposites
Mousavi, A. A., Fankhänel, J., Arash, B., & Rolfes, R. (2021) · Research topics in aerospace · doi:10.1007/978-3-030-68523-2_9 · Cited by 1
Polymer composites modeling in the tire industry
Giunta, G., Taherian, F., Campos-Villalobos, G., et al. (2025) · Elsevier eBooks · doi:10.1016/b978-0-44-327314-8.00015-4
Xu, L., Yang, Y., & Yin, B. (2025) · Chemical Physics Letters · doi:10.1016/j.cplett.2025.142152 · Cited by 1
Modelling strain-induced crystallization at the molecular scale
Nagaraj, H. (2021) · theses.fr (ABES) · doi:10.70675/ad643e91z628az4293za29az1ea1ac68c940
Temporal Renormalization and the Critical-like Behavior in Supercooled Liquids
Zhang, D., Sun, D., & Gong, X. (2026) · Chinese Physics Letters · doi:10.1088/0256-307x/43/2/020002
Numerical modeling and simulation of polymer failure at elevated temperatures
Fameso, F. O., Salifu, S. A., Snyman, J., Muloiwa, M., Kupolati, W. K., Ndambuki, J. M., Olubambi, P. A., & Desai, D. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-32792-6.00014-2
Polymers and Their Uses in Drug Delivery
Gajbhiye, S. A., Ahire, E. D., Patil, M. P., Meshram, P. R., & Patil, Y. M. (2025) · Wiley eBooks · doi:10.1002/9781394172856.ch7 · Cited by 1
Payne, W. M. (2020) · DigitalCommons@UNMC
Investigating silica nanoparticles / polymer composites : a coarse-grained molecular dynamics study
Perrin, E. (2018) · theses.fr (ABES) · doi:10.70675/f0540a05z30caz47a6zaba3z93d5c408751b
Alenazy, D. M., & Alghasham, H. A. (2026) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-026-11591-6
Zhang, Y., Wang, B., Chu, D., Shang, W., Hou, G., Zhao, F., & Weng, Y. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c03053
Simulation multi-échelle de l'interaction polymère-charge
Kempfer, K. (2019) · theses.fr (ABES) · doi:10.70675/f3c1cd46zc1faz43c3z9824z65db1f8dcce1
Naito, Y., NISHIKAWA, M., Oya, Y., et al. (2021) · Journal of the Japan Society for Composite Materials · doi:10.6089/jscm.47.97
Modeling and Experimental Characterization of Nanocomposite Materials
Hadavinia, H. (2020) · MDPI eBooks · doi:10.3390/books978-3-03928-633-1
Computer simulation of polymer nanocomposites: Challenges and perspectives
Escañuela-Copado, S., Valero, D., Giunta, G., Martín‐Molina, A., & Patti, A. (2026) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2026.114788
Naderi, H., & Dargazany, R. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5402089 · Cited by 1
Étude par dynamique moléculaire du comportement mécanique et de la rupture d'élastomères irradiés
Mahaud, M. (2017) · theses.fr (ABES) · doi:10.70675/75f41cdbze22ez4f84zb079zb058a66231db
Naderi, H., & Dargazany, R. (2025) · Mechanics of Materials · doi:10.1016/j.mechmat.2025.105548 · Cited by 4
Metadata
- Authors
- Li, Y., Abberton, B., Kröger, M., & Liu, W.
- Affiliations
- Northwestern University (US)
- ETH Zurich (CH)
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2013-06-13
- Volume
- 5
- Issue
- 2
- Pages
- 751-832
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1972149909
- Cited by
- 222
- References
- 437
- Citations by year
- 2026: 12 · 2025: 16 · 2024: 15 · 2023: 9 · 2022: 20 · 2021: 21 · 2020: 25 · 2019: 24 · 2018: 13 · 2017: 21 · 2016: 13 · 2015: 17 · 2014: 13 · 2013: 3
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Repository for Publications and Research Data (ETH Zurich) (submittedVersion, cc-by)
- ETH Zürich Research Collection (cc-by)
- Funders
- National Science Foundation (0928320, 0823327, DE-AC02–06CH11357, 1130948)
- U.S. Department of Energy (DE‐ AC02‐06CH11357, AC02‐06CH11357, contract DE-AC02-06CH11357, 06CH11357, DE-AC02-)
- Northwestern University (DE-AC02-06CH11357)
- National Research Foundation
- National Research Foundation of Korea (DE-AC02-06CH11357)
- Ministry of Education, Science and Technology (R33-10079)
- Office of Science (AC02‐06CH11357, DE-AC02, 06CH11357, DE-AC02-06CH11357)
- Division of Civil, Mechanical and Manufacturing Innovation
- Argonne National Laboratory (DE- AC02-06-CH11357, DE-AC02, AC02–06CH11357, 06CH11357, under contract DE-AC02-06CH11357)
- Topics
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Advanced Physical and Chemical Molecular Interactions
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- multiscale modeling, polymer dynamics, coarse-graining, polymer rheology, polymer chemistry, polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-28, under version 3 of the claim definition (prompt extract-v3).
A second model labelled each claim on 2026-09-28 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.