The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Effect of Plasticizer Type and Concentration on Tensile, Thermal and Barrier Properties of Biodegradable Films Based on Sugar Palm (Arenga pinnata) Starch
Open accessAbstract
The use of starch based films as a potential alternative choice to petroleum derived plastics is imperative for environmental waste management. This study presents a new biopolymer (sugar palm starch) for the preparation of biodegradable packaging films using a solution casting technique. The effect of different plasticizer types (glycerol (G), sorbitol (S) and glycerol-sorbitol (GS) combination) with varying concentrations (0, 15, 30 and 45, w/w%) on the tensile, thermal and barrier properties of sugar palm starch (SPS) films was evaluated. Regardless of plasticizer types, the tensile strength of plasticized SPS films decreased, whereas their elongation at break (E%) increased as the plasticizer concentrations were raised. However, the E% for G and GS-plasticized films significantly decreased at a higher plasticizer concentration (45% w/w) due to the anti-plasticization effect of plasticizers. Change in plasticizer concentration showed an insignificant effect on the thermal properties of S-plasticized films. The glass transition temperature of SPS films slightly decreased as the plasticizer concentration increased from 15% to 45%. The plasticized films exhibited increased water vapor permeability values from 4.855 × 10−10 to 8.70 × 10−10 g·m−1·s−1·Pa−1, irrespective of plasticizer types. Overall, the current study manifested that plasticized sugar palm starch can be regarded as a promising biopolymer for biodegradable films.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Natural-based plasticizers and biopolymer films: A review
Vieira, M. G. A., da Silva, M. A., dos Santos, L. O., & Beppu, M. M. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.12.011 · Cited by 1,992
Mali, S., Sakanaka, L. S., Yamashita, F., & Grossmann, M. V. E. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.01.003 · Cited by 656
Preparation and properties of rice starch–chitosan blend biodegradable film
Bourtoom, T., & Chinnan, M. S. (2008) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2007.10.014 · Cited by 587
Effects of Hydrophilic Plasticizers on Mechanical, Thermal, and Surface Properties of Chitosan Films
Suyatma, N. E., Tighzert, L., Copinet, A., & Coma, V. (2005) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf048790+ · Cited by 466
Talja, R. A., Helén, H., Roos, Y. H., & Jouppila, K. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.05.019 · Cited by 444
Rodríguez, M., Osés, J., Ziani, K., & Maté, J. I. (2006) · Food Research International · doi:10.1016/j.foodres.2006.04.002 · Cited by 419
Lipid Addition to Improve Barrier Properties of Edible Starch‐based Films and Coatings
García, M. A., Martino, M. N., & Zaritzky, N. (2000) · Journal of Food Science · doi:10.1111/j.1365-2621.2000.tb09397.x · Cited by 404
Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Journal of Food Science and Technology · doi:10.1007/s13197-015-2009-7 · Cited by 399
Self-citationRhim, J.-W. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.05.010 · Cited by 368
Effect of Plasticizers on Mechanical and Barrier Properties of Rice Starch Film
Laohakunjit, N., & Noomhorm, A. (2004) · Starch - Stärke · doi:10.1002/star.200300249 · Cited by 359
Thermoplastic Starch Processing and Characteristics—A Review
Zhang, Y., Rempel, C., & Liu, Q. (2014) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2011.636156 · Cited by 348
Barrier, mechanical and optical properties of plasticized yam starch films
Mali, S., Grossmann, M. V. E., Garcı́a, M. A., Martino, M. N., & Zaritzky, N. E. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.01.004 · Cited by 342
Müller, C. M. O., Yamashita, F., & Laurindo, J. B. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.07.026 · Cited by 338
Müller, C. M. O., Laurindo, J. B., & Yamashita, F. (2009) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2008.09.002 · Cited by 328
Synthesis of nano cellulose fibers and effect on thermoplastics starch based films
Savadekar, N. R., & Mhaske, S. T. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.02.063 · Cited by 303
Chiumarelli, M., & Hubinger, M. D. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.11.013 · Cited by 297
Ghasemlou, M., Khodaiyan, F., & Oromiehie, A. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.12.010 · Cited by 285
Effect of agar on the microstructure and performance of potato starch film
Wu, Y., Geng, F., Chang, P. R., Yu, J., & Ma, X. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.10.031 · Cited by 262
Effect of glycerol concentration on edible film production from cress seed carbohydrate gum
Jouki, M., Khazaei, N., Ghasemlou, M., & HadiNezhad, M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.077 · Cited by 256
Development of thermoplastic starch blown film by incorporating plasticized chitosan
Dang, K. M., & Yoksan, R. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.09.005 · Cited by 255
Characterization of a new biodegradable edible film made from salep glucomannan
Kurt, A., & Kahyaoglu, T. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.01.003 · Cited by 242
Effects of plasticizers on thermal properties and heat sealability of sago starch films
Abdorreza, M. N., Cheng, L. H., & Karim, A. A. (2011) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2010.05.005 · Cited by 236
Biodegradable films based on rice starch and rice flour
Dias, A. B., Müller, C. M. O., Larotonda, F. D. S., & Laurindo, J. B. (2010) · Journal of Cereal Science · doi:10.1016/j.jcs.2009.11.014 · Cited by 236
Razavi, S. M. A., Mohammad Amini, A., & Zahedi, Y. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2014.05.028 · Cited by 229
Gutiérrez, T. J., Tapia, M. S., Pérez, E., & Famá, L. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2014.11.017 · Cited by 226
Phan The, D., Debeaufort, F., Voilley, A., & Luu, D. (2009) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2008.07.023 · Cited by 226
Water vapor permeability, tensile properties and solubility of methylcellulose-based edible films
Nazan Turhan, K., & Şahbaz, F. (2004) · Journal of Food Engineering · doi:10.1016/s0260-8774(03)00155-9 · Cited by 215
Development of model for barrier and optical properties of tapioca starch based edible films
Maran, J. P., Sivakumar, V., Sridhar, R., & Thirugnanasambandham, K. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.09.069 · Cited by 214
Chang, Y. P., Abd Karim, A., & Seow, C. C. (2006) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2005.02.004 · Cited by 193
Comparative susceptibilities of sago, potato and corn starches to alkali treatment
Nor Nadiha, M. Z., Fazilah, A., Bhat, R., & Karim, A. A. (2010) · Food Chemistry · doi:10.1016/j.foodchem.2010.01.048 · Cited by 184
Imran, M., El-Fahmy, S., Revol‐Junelles, A., & Desobry, S. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.02.021 · Cited by 179
Antiplasticisation and oxygen permeability of starch–sorbitol films
Gaudin, S., Lourdin, D., Forssell, P. M., & Colonna, P. (2000) · Carbohydrate Polymers · doi:10.1016/s0144-8617(99)00206-4 · Cited by 174
Food packaging bags based on thermoplastic corn starch reinforced with talc nanoparticles
López, O. V., Castillo, L. A., García, M. A., Villar, M. A., & Barbosa, S. E. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2014.04.021 · Cited by 173
Gutiérrez, T. J., Morales, N. J., Pérez, E., Tapia, M. S., & Famá, L. (2015) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2014.09.002 · Cited by 168
Yakimets, I., Paes, S. S., Wellner, N., Smith, A. C., Wilson, R. H., & Mitchell, J. R. (2007) · Biomacromolecules · doi:10.1021/bm070050x · Cited by 160
Biodegradable packages development from starch based heat sealable films
López, O. V., Lecot, C. J., Zaritzky, N., et al. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.02.029 · Cited by 155
Characterization of polyhydroxybutyrate-hydroxyvalerate (PHB-HV)/maize starch blend films
dos Reis, K. C., Pereira, J. R. D., Smith, A. C., de Carvalho, C. W. P., Wellner, N., & Yakimets, I. (2008) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2008.04.022 · Cited by 153
Thermo-mechanical behaviors of thermoplastic starch derived from sugar palm tree (Arenga pinnata)
Sahari, J., Sapuan, S. M., Zainudin, E. S., & Maleque, M. A. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.11.031 · Cited by 151
Self-citationThakhiew, W., Devahastin, S., & Soponronnarit, S. (2010) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2010.02.025 · Cited by 129
A comparison between the physico-chemical properties of tuber and cereal starches
García, N. L., Famá, L., Dufresne, A., Aranguren, M. I., & Goyanes, S. (2009) · Food Research International · doi:10.1016/j.foodres.2009.05.004 · Cited by 123
Tian, H., Xu, G., Yang, B., & Guo, G. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.06.008 · Cited by 122
Films from oat spelt arabinoxylan plasticized with glycerol and sorbitol
Mikkonen, K. S., Heikkinen, S. L., Soovre, A., Peura, M., Serimaa, R. E., Talja, R. A., Helén, H., Hyvönen, L. E. T., & Tenkanen, M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30513 · Cited by 119
Smits, A. L. M., Kruiskamp, P. H., van Soest, J. J. G., et al. (2003) · Carbohydrate Polymers · doi:10.1016/s0144-8617(03)00119-x · Cited by 111
Fu, Z., Wang, L., Li, D., Wei, Q., & Adhikari, B. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.032 · Cited by 103
Tapia‐Blácido, D. R., Sobral, P. J. D. A., & Menegalli, F. C. (2012) · LWT · doi:10.1016/j.lwt.2012.09.008 · Cited by 98
Xie, F., Flanagan, B. M., Li, M., Sangwan, P., Truss, R. W., Halley, P. J., Strounina, E. V., Whittaker, A. K., Gidley, M. J., Dean, K., et al. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.05.058 · Cited by 97
Tapia‐Blácido, D. R., Sobral, P. J. D. A., & Menegalli, F. C. (2011) · LWT · doi:10.1016/j.lwt.2011.04.004 · Cited by 93
Films Prepared with Oxidized Banana Starch: Mechanical and Barrier Properties
Zamudio‐Flores, P. B., Vargas‐Torres, A., Pérez‐González, J., Bosquez‐Molina, E., & Bello‐Pérez, L. A. (2006) · Starch - Stärke · doi:10.1002/star.200500474 · Cited by 93
Cuq, B., Gontard, N., Aymard, C., et al. (1997) · Polymer Gels and Networks · doi:10.1016/s0966-7822(96)00026-3 · Cited by 89
Creep behavior of starch-based nanocomposite films with cellulose nanofibrils
Li, M., Li, D., Wang, L.-J., & Adhikari, B. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.023 · Cited by 69
Zhang, H., Balaban, M., Príncipe, J. C., & Portier, K. M. (2005) · Journal of Food Science · doi:10.1111/j.1365-2621.2005.tb07180.x · Cited by 60
Retrogradation and Antiplasticization of Thermoplastic Starch
Zhang, Y., & Rempel, C. (2012) · InTech eBooks · doi:10.5772/35848 · Cited by 50
Effect of Plasticizers on the Moisture Migration Behavior of Low-Amylose Starch Films during Drying
Adhikari, B., Chaudhary, D. S., & Clerfeuille, E. (2010) · Drying Technology · doi:10.1080/07373931003613593 · Cited by 45
Wittaya, T. (2009) · Cited by 33
Effect of flaxseed meal on the dynamic mechanical properties of starch-based films
Wu, M., Wang, L., Li, D., Mao, Z., & Adhikari, B. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.04.017 · Cited by 24
Cited by
Film formation and deposition methods of edible coating on food products: A review
Suhag, R., Kumar, N., Petkoska, A. T., & Upadhyay, A. (2020) · Food Research International · doi:10.1016/j.foodres.2020.109582 · Cited by 613
Starch-based films: Major factors affecting their properties
Thakur, R., Pristijono, P., Scarlett, C. J., Bowyer, M., Singh, S. P., & Vuong, Q. V. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.190 · Cited by 573
Tarique, J., Sapuan, S. M., & Khalina, A. (2021) · Scientific Reports · doi:10.1038/s41598-021-93094-y · Cited by 522
Self-citationBiodegradability and plasticizing effect of yerba mate extract on cassava starch edible films
Medina Jaramillo, C., Gutiérrez, T. J., Goyanes, S., Bernal, C., & Famá, L. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.05.025 · Cited by 398
Kabir, E., Kaur, R., Lee, J., Kim, K.-H., & Kwon, E. E. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120536 · Cited by 371
Metadata
- Authors
- Sanyang, M., Sapuan, S., Jawaid, M., Ishak, M., & Sahari, J.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2015-06-18
- Volume
- 7
- Issue
- 6
- Pages
- 1106-1124
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1521183552
- Cited by
- 509
- References
- 55
- FWCI
- 10.35
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.