Block Copolymers: Synthesis, Self-Assembly, and Applications
Open accessThe DOI matches its Crossref record; 163 of the 163 references it cites were found in a registry or an index; 23 of the 164 sources its claims cite were checked for support.
Abstract
This review briefly discusses recent progress in block copolymer synthesis, followed by fundamentals of self-assembly and applications.
Overview
CoChat Summary
TL;DR
This review summarizes progress in block copolymer (BCP) synthesis, self-assembly, and applications, emphasizing controlled/living polymerization, coupling chemistry, and morphology control. It highlights BCP uses as thermoplastic elastomers, drug-delivery vehicles, soft-lithography templates, and mesoporous materials.
Key findings
- BCP synthesis is dominated by sequential controlled/living polymerization—especially ATRP, RAFT, NMP, and living anionic polymerization—and by coupling/click or supramolecular routes; living anionic polymerization can give very low PDI, e.g. 1.04 in one multiblock example.
- Self-assembly in bulk is governed by χ, N, and volume fraction f, producing spheres, cylinders, gyroids, and lamellae; solution self-assembly is controlled largely by the packing parameter p = v/a0lc, yielding micelles, vesicles, tubules, and related structures.
- Applications include thermoplastic elastomers, where a tetrafunctional multigraft copolymer with 10 branching points showed elongation at break ~2100% versus ~1050% for commercial Kraton®, and mesoporous materials, where PEO-b-PS templating achieved silica pore diameters up to 30.8 nm.
- In soft lithography, PS-b-PMMA is limited to ~13 nm feature size due to low χ (~0.039 at 150 °C), while high-χ systems such as PS-b-PEO, PLA-PDMS-PLA, and silicon-containing BCPs have demonstrated 3-nm, 7-nm, and 5-nm features, respectively.
Methods
- Design: narrative review of BCP synthesis, self-assembly, and applications, with sections on controlled polymerization, living anionic polymerization, coupling strategies, bulk/solution self-assembly, and application areas.
- Data/sample: no primary experimental dataset; the paper synthesizes and discusses selected literature examples, figures, schemes, and prior reports.
- Analysis: qualitative synthesis of published results, including reported morphologies, mechanical properties, feature sizes, pore dimensions, and synthetic strategies.
Limitations
- The paper states that challenges remain in establishing structure-property relationships and that more interdisciplinary collaborations are needed across synthesis, characterization, theory, and simulation.
- Evident from the text: as a review, it presents no new experimental data and does not use a systematic or quantitative literature-search methodology.
- Evident from the text: coverage is explicitly selective, e.g. the authors state it is beyond the scope to cover all aspects of self-assembly and external-field effects.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures



![Scheme 2 Synthesis of polyallene-based triblock copolymer using conventional free radical and ATRP. Reprinted from Reference [30]. (Copyright (2017) Nature Publishing Group).](https://figures.cochat.ai/paper-figures/b855db69b12f496dbe8b4fa15eaf9589/block-copolymers-synthesis-self-assembly-and-applications-figure-4.jpg)


![Figure 3 Illustration of complex architectures using living anionic polymerization and coupling chemistry. Adapted from Reference [55]. (Copyright (2017) WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim).](https://figures.cochat.ai/paper-figures/53a6cca6d7904263be7e768764224870/block-copolymers-synthesis-self-assembly-and-applications-figure-3.jpg)
![Scheme 5 One pot polymerization of PMMA-b-PCL using combination of metal-free ATRP and ring opening polymerization (ROP) simultaneously under sunlight. Reprinted from Reference [56]. (Copyright (2017) Royal Society of Chemisty).](https://figures.cochat.ai/paper-figures/ad49969a8d474042a2637f0377c5fa8d/block-copolymers-synthesis-self-assembly-and-applications-figure-8.jpg)
![Figure 4 (a) Preparation of PMMA-b-PEG block copolymer via ATRP and azide-alkyne click reaction. (b) Size exclusion chromatography (SEC) curves of PMMA, polyethylene glycol (PEG), and PMMA-b-PEG diblock copolymer. Reprinted from Reference [57]. (Copyright (2005) Royal Society of Chemistry).](https://figures.cochat.ai/paper-figures/22b32ef923114f8eb3ab13a6e49b431d/block-copolymers-synthesis-self-assembly-and-applications-figure-4.jpg)
![Figure 5 Synthesis of cyclic PS-b-PEO copolymer. Reprinted from Reference [11]. (Copyright (2012) American Chemical Society).](https://figures.cochat.ai/paper-figures/68b6fcd63326479cb80210bb66ecff71/block-copolymers-synthesis-self-assembly-and-applications-figure-5.jpg)
![Figure 6 Synthetic strategies to block copolymers (BCPs) using thiol-based coupling reactions. Reprinted from Reference [59]. (Copyright (2014) Royal Society of Chemistry).](https://figures.cochat.ai/paper-figures/d24f84373a0e42c7909d3b286dd943dc/block-copolymers-synthesis-self-assembly-and-applications-figure-6.jpg)
![Scheme 6 Formation of block copolymers via a reversible addition-fragmentation chain transfer (RAFT) polymerization and a hetero Diels-Alder reaction. Adapted from Reference [60]. (Copyright (2008) American Chemical Society).](https://figures.cochat.ai/paper-figures/882013aa98774f6f94542a6934c169e5/block-copolymers-synthesis-self-assembly-and-applications-figure-12.jpg)
![Figure 7 (a) Equilibrium morphologies of AB diblock copolymers in bulk: S and S’ = body-centered-cubic spheres, C and C’ = hexagonally packed cylinders, G and G’ = bicontinuous gyroids, and L = lamellae. (b) Theoretical phase diagram of AB diblocks predicted by the self-consistent mean-field theory, depending on volume fraction (f) of the blocks and the segregation parameter, χN; CPS and CPS’ = closely packed spheres. (c) Experimental phase diagram of polystyrene-b-polyisoprene copolymers, in which fA represents the volume fraction of polyisoprene, PL = perforated lamellae. Reproduced from Reference [69]. (Copyright (2012) Royal Society of Chemistry).](https://figures.cochat.ai/paper-figures/cfdeb31628504caba069189496ceee4a/block-copolymers-synthesis-self-assembly-and-applications-figure-7.jpg)
![Figure 8 TEM and small-angle X-ray scattering (SAXS) images of sPS-b-fPI. (A) ordered hexagonal structures without annealing; (B) less ordered structures of sample annealed at 120 °C; (C) SAXS of the corresponding samples in (A,B). Reprinted from Reference [72]. (Copyright (2010) Royal Society of Chemistry).](https://figures.cochat.ai/paper-figures/16bddea573c041c28eba42c052141c2f/block-copolymers-synthesis-self-assembly-and-applications-figure-8.jpg)
![Figure 9 Gyroid-forming PI-b-PS-b-PEO block copolymers and the preparation process of NbN superconductors. Reprinted with permission from Reference [75]. (Copyright (2016) the authors).](https://figures.cochat.ai/paper-figures/344c9061501c4b1c82e49ad25e938d19/block-copolymers-synthesis-self-assembly-and-applications-figure-9.jpg)
![Figure 10 The types of formed nanostructures of amphiphilic diblock copolymers due to the inherent curvature of the polymer, as estimated by chain packing parameter, p. Reprinted from Reference [80]. (Copyright (2009) WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim).](https://figures.cochat.ai/paper-figures/62844807c70043b29d5a58b5b6877db7/block-copolymers-synthesis-self-assembly-and-applications-figure-10.jpg)
![Figure 11 TEM images and corresponding schematic diagrams of various morphologies formed by amphiphilic PSm-b-PAAn copolymers( m and n denote the degrees of polymerization of PS and PAA, respectively): (a) spherical micelles; (b) rods; (c) bicontinuous rods; (d) small lamellae; (e) large lamellae; (f) vesicles; (g) hexagonally packed hollow hoops (HHHs); (h) large compound micelles (LCMs). Reprinted from Reference [69]. (Copyright (2012) Royal Society of Chemistry).](https://figures.cochat.ai/paper-figures/bb68eeb326cb4cecb8a6a3e2d55d4aa8/block-copolymers-synthesis-self-assembly-and-applications-figure-11.jpg)
![Figure 12 The schematic representation of the micelles from polyferrocenylsilane (PFS)—containing BCPs via epitaxial growth. Reprinted from Reference [82]. (Copyright (2007) American Association for the Advancement of Science).](https://figures.cochat.ai/paper-figures/429d7776d8a047ac83067c98dad98485/block-copolymers-synthesis-self-assembly-and-applications-figure-12.jpg)
![Figure 13 The schematic illustration of linear amphiphilic PBA-b-PEO-b-PBA and cyclic PBA-b-PEO-b-PBA self-assembly in aqueous media. The cyclic BCP shows an increased Tc. Reprinted from Reference [83]. (Copyright (2010) American Chemical Society).](https://figures.cochat.ai/paper-figures/d68449ad9983410884445a9e77423fde/block-copolymers-synthesis-self-assembly-and-applications-figure-13.jpg)
![Figure 14 Morphology diagram for PB-PEO in water (1 wt %) as a function of molecular size and composition, where NPB and WPEO are the degree of polymerization and weight fraction of the PB and PEO blocks, respectively. Reprinted from Reference [84]. (Copyright (2003) American Association for the Advancement of Science).](https://figures.cochat.ai/paper-figures/82ea8dfd65424cca82380f734af89a21/block-copolymers-synthesis-self-assembly-and-applications-figure-14.jpg)
![Figure 15 The structure of poly(benzofulvene (BF)-b-isoprene-b-benzofulvene) (FIF) block copolymer and mechanical analysis. Reprinted from Reference [92]. (Copyright (2016) American Chemical Society).](https://figures.cochat.ai/paper-figures/7f3531e38d2544afbfadc1d54e872e8f/block-copolymers-synthesis-self-assembly-and-applications-figure-15.jpg)
![Figure 16 (A) Stress–strain behavior of tetrafunctional multigraft copolymers compared to commercial thermoplastic elastomers. Reprinted from Reference [96]. (Copyright (2006) American Chemical Society). (B) Hysteresis curve of a tetrafunctional multigraft copolymer with 14 vol % PS and 5.5 branching points. Reprinted from Reference [97]. (Copyright (2006) WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim).](https://figures.cochat.ai/paper-figures/e87881a0f027430fb21868a530bb1690/block-copolymers-synthesis-self-assembly-and-applications-figure-16.jpg)
![Figure 17 Surface force microscopy (SFM) phase image of (A) cylinder-forming PS-b-PMMA and (B) lamella-forming PS-b-PMMA on the substrate modified by R64 (PS mole fraction of 0.64) and R55 (PS mole fraction of 0.55), respectively, at various film thicknesses of block copolymer after thermally annealing thin films at 170 °C for 24 h. Reprinted from Reference [119]. (Copyright (2008) American Chemical Society).](https://figures.cochat.ai/paper-figures/39348f6676b24c059933aa27fef66207/block-copolymers-synthesis-self-assembly-and-applications-figure-17.jpg)
![Figure 18 Atomic force microscopy (AFM) height images of sawtooth patterns and phase images of solvent-annealed PS-b-PEO thin films. (A,D) When the M-plane sapphire was annealed at 1400 °C and 1500 °C, a pitch of ~48 and ~24 nm and a peak-to-valley depth of ~6 and ~3 nm were obtained, respectively. Highly ordered PEO cylindrical microdomains having areal densities of 0.74 to 10.5 terabit/inch2 from PS-b-PEO (Mn = 26.5 kg/mol) (B), PS-b-PEO (Mn = 25.4 kg/mol) (C), PS-b-PEO (Mn = 21.0 kg/mol) (E), and PS-b-PEO (Mn = 7.0 kg/mol) (F) BCP thin films annealed in o-xylene vapor were obtained. Scale bars, 100 nm. Reprinted from Reference [123]. (Copyright (2009) American Association for the Advancement of Science).](https://figures.cochat.ai/paper-figures/ecad47b832134c1aa055c4a2979d51f9/block-copolymers-synthesis-self-assembly-and-applications-figure-18.jpg)
![Figure 19 Atomic force microscopy height images for (a) cyclic PS13K-b-PEO5K and (b) PS13K-b-PEO5K diblock copolymers (inlet: 2D fast Fourier transform (FFT) of AFM images). Scale bars are 250 nm. Reprinted from Reference [11]. (Copyright (2012) American Chemical Society).](https://figures.cochat.ai/paper-figures/9931335004fe4537978a7f90fa052be0/block-copolymers-synthesis-self-assembly-and-applications-figure-19.jpg)
![Figure 20 (A) Formation mechanism of ordered mesoporous silica through the solvent evaporation -induced aggregating assembly (EIAA) process by using diblock copolymer PEO-b-PMMA as a template, tetraethylorthosilicate (TEOS) as the silica source, and acidic tetrahydrofuran (THF)/H2O mixture as the solvent; (B) Typical field-emission scanning electron microscopy (FESEM) image of mesoporous silica calcinated in air at 550 °C. Reprinted from Reference [150]. (Copyright (2011) American Chemical Society).](https://figures.cochat.ai/paper-figures/85550fdacda1455390d03f7b37728b44/block-copolymers-synthesis-self-assembly-and-applications-figure-20.jpg)
![Figure 21 Synthesis of nitrogen-doped mesoporous carbon spheres (NMCS) with extra-large pores through the assembly of diblock copolymer micelles. Reprinted from Reference [152]. (Copyright (2015) WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim).](https://figures.cochat.ai/paper-figures/2c75e82d6c2b44dd93e93ca4b6aac33d/block-copolymers-synthesis-self-assembly-and-applications-figure-21.jpg)
![Figure 22 Ternary diagram mapping out the morphologies found for various composites directed by PI-b-PEO using (3-glycidyloxypropyl)trimethoxysilane (GLYMO) and aluminum sec-butoxide as inorganic precursors. At the bottom of the diagram, schematics of the morphologies found for the pure PI-b-PEO are shown. Hatched areas along the PI-b-PEO axis indicate areas where no data was available from the diblock copolymer diagram. Each white region within the diagram is labeled with a schematic representing the morphology of the composites formed. The yellow (light) regions in these schematic morphologies on the right and left are a representation of the PEO/inorganic domains. Closed dark points on a gray background indicate areas where biphasic behavior is observed. Reprinted from Reference [161]. (Copyright (2009) American Chemical Society).](https://figures.cochat.ai/paper-figures/a7eefad8dbbd46bd9ffe37dab35e9a6e/block-copolymers-synthesis-self-assembly-and-applications-figure-22.jpg)
Verification
Claims the paper makes
16 Valid · 9 Not valid · 113 Not checked · 51 Own results and interpretations
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“Thanks to the advancement of polymer synthetic strategies and techniques, e.g., controlled polymerization techniques along with facile post-polymerization functionalization, BCPs with precisely controlled molecular weights and defined macromolecular architectures can be prepared [2,3,4,5,6,7,8].”
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > 1. Introduction
What the sources say
- Supportedcites [2] Hadjichristidis, 2006, Macromolecular architectures by living and controlled/living polymerizations, Prog. Polym. Sci. sourceExperimental — accuracy not yet measured
The exact sentence appears in “Block Copolymers: Synthesis, Self-Assembly, and Applications” (Semantic Scholar score 0.80), but that is the citing paper: it attributes the statement to references [2–8], including Hadjichristidis (2006), rather than presenting itself as an alternative source. The cited review’s title directly concerns living and controlled polymerizations and macromolecular architectures, consistent with the core claim. No paper-scoped snippet was available to verify whether it also discusses post-polymerization functionalization, so that part remains uncertain; the matching sentence alone is not evidence of misattribution. (LLM, conf=0.72)
- Supportedcites [3] Uhrig, 2005, Experimental techniques in high-vacuum anionic polymerization, J. Polym. Sci. Part A Polym. Chem. sourceExperimental — accuracy not yet measured
The prior search result places the claim in “Block Copolymers: Synthesis, Self-Assembly, and Applications,” where the sentence cites references [2–8], a group that includes Uhrig (2005) according to the citing document. Uhrig’s title, “Experimental techniques in high-vacuum anionic polymerization,” is relevant to the controlled-polymerization part of this broad claim; the sentence’s appearance in a later review is not, by itself, evidence of misattribution. The cited paper has no available full-text snippets, so its support for the post-polymerization-functionalization part cannot be checked directly. (LLM, conf=0.72)
- Could not verifycites [4] Zhang, 2002, Synthesis of block copolymers of styrene and methyl methacrylate by conventional free radical polymerization in room temperature ionic liquids, Macromolecules sourceExperimental — accuracy not yet measured
The cited Zhang paper concerns synthesizing styrene–methyl methacrylate block copolymers in ionic liquids, but both paper-scoped searches returned no text to verify precise molecular-weight control, defined architectures, or post-polymerization functionalization. The verbatim match is in “Block Copolymers: Synthesis, Self-Assembly, and Applications”—the citing work itself, which attributes the sentence collectively to references [2]–[8], not an independent source of the claim. A separate snippet says ionic liquids can be used to synthesize these block copolymers, but does not establish the claim’s more specific assertions. The evidence is insufficient to confirm the full attribution or to call it misattributed. (LLM, conf=0.72)
- Could not verifycites [5] Uhrig, 2002, Synthesis of combs, centipedes, and barbwires: Poly (isoprene-graft-styrene) regular multigraft copolymers with trifunctional, tetrafunctional, and hexafunctional branch points, Macromolecules sourceExperimental — accuracy not yet measured
The cited Uhrig paper’s title concerns the synthesis of regular multigraft copolymers with defined branch-point architectures, so it is relevant to the claim. The paper-scoped search returned no snippets, and its full text and abstract were unavailable here; the specific combination of controlled polymerization and post-polymerization functionalization therefore could not be checked. The close wording identified in *Block Copolymers: Synthesis, Self-Assembly, and Applications* is the citing sentence itself, which cites several papers, not evidence that Uhrig was wrongly credited. The evidence does not meet the requirements for a misattribution verdict. (LLM, conf=0.62)
- Not checked — no full text of the sourcecites [6] Hong, 1999, Living anionic polymerization, Curr. Opin. Solid State Mater. Sci. source
- Not checked — no full text of the sourcecites [7] Pochan, 1996, Morphologies of microphase-separated A2B simple graft copolymers, Macromolecules source
- Not checked — no full text of the sourcecites [8] Bates, 1999, Block copolymers—Designer soft materials, Phys. Today source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The preparation of BCPs using sequential CRP relies on the fact that the reactive polymer chain end is preserved by a reversible reaction between the active species and the dormant species [17,18,19].”
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > 2. Synthesis of BCPs > 2.1. Sequential Addtion Polymerization
What the sources say
- Not checked — no full text of the sourcecites [17] Braunecker, 2007, Controlled/living radical polymerization: Features, developments, and perspectives, Prog. Polym. Sci. source
- Partly supportedcites [18] Gody, 2016, The limits of precision monomer placement in chain growth polymerization, Nat. Commun. sourceExperimental — accuracy not yet measured
The introductory section (page unavailable) identifies controlled radical polymerization as reversible-deactivation radical polymerization, and ‘Absolute position of monomers’ discusses sequentially prepared blocks and activation–deactivation cycles. Our copy does not state that a reaction between active and dormant species preserves the reactive chain end, so it supports the general context but not the claimed mechanism. (LLM, conf=0.79)
- Could not verifycites [19] Cao, 2017, A star-shaped single lithium-ion conducting copolymer by grafting a poss nanoparticle, Polymer sourceExperimental — accuracy not yet measured
The Conclusion (p. 23) describes attaching PEO and a RAFT chain-transfer agent to POSS, followed by RAFT polymerization; the thermal-analysis section (p. 16) also describes a diblock copolymer made from PEO-terminated RAFT-CTA. Neither passage addresses sequential controlled radical polymerization or explains preservation of a reactive chain end through a reversible reaction between active and dormant species. Searches for that mechanism found no passage stating it. (LLM, conf=0.76)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Controlled radical polymerization (CRP) techniques represent the most versatile and facile approach for BCP synthesis, mainly due to their compatibility with a wide spectrum of monomers, high tolerance of functional groups and impurities, and ease of experimental setup [14,15,16].”
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > 2. Synthesis of BCPs > 2.1. Sequential Addtion Polymerization
What the sources say
- Could not verifycites [14] Fan, 2016, Effect of molecular weight on the ion transport mechanism in polymerized ionic liquids, Macromolecules sourceExperimental — accuracy not yet measured
Split into 2 atoms — 0 confirmed, 0 partially supported, 0 disputed, 0 misattributed, 2 unverifiable. Expand the claim to see per-atom verdicts.
- Partly supportedcites [15] Matyjaszewski, 2005, Controlled/living radical polymerization, Mater. Today sourceExperimental — accuracy not yet measured
The Scope of CRP section (page unavailable) says CRP can make block copolymers, adapts to different polymerization systems, and tolerates functional groups on monomers. The Abstract (page unavailable) describes nonstringent conditions and a wide monomer range for conventional free radical polymerization, but the paper does not establish that CRP is the most versatile or facile approach to block-copolymer synthesis, or that CRP has high impurity tolerance and an easy experimental setup. (LLM, conf=0.86)
- Not checked — no full text of the sourcecites [16] Matyjaszewski, K., Sumerlin, B.S., and Tsarevsky, N.V. (2012). Progress in Controlled Radical Polymerization: Mechanisms and Techniques, American Chemical Society. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“However, ATRP still does not work for some monomers, though it has many advantages compared to other polymerization methods for block copolymerization. For example, some monomers contain functionality that can form complexes with transition metal catalyst and have a detrimental effect on polymerization, such as side reactions resulting in a broad polydispersity index (PDI) [15].”
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > 2. Synthesis of BCPs > 2.1. Sequential Addtion Polymerization
What the sources say
- Partly supportedcites [15] Matyjaszewski, 2005, Controlled/living radical polymerization, Mater. Today sourceExperimental — accuracy not yet measured
The Abstract identifies ATRP as transition-metal-catalyzed, and Corporate CRP research describes its advantages for making block copolymers. Scope of CRP notes unavoidable side reactions in an ATRP-made star polymer, but reports a narrow polydispersity index of 1.04. No passage found says that monomer functionality complexes with the catalyst, prevents ATRP for some monomers, or causes a broad PDI. (LLM, conf=0.80)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Because of its superior control over the molecular weight, architecture, composition, and functionality as compared to controlled radical polymerization, almost all well-defined BCPs with complex architectures such as star, comb, graft, dendritic, etc. are achievable via the combination of anionic polymerization and linking chemistry [6,42,43,44,45,46,47].”
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > 2. Synthesis of BCPs > 2.1. Sequential Addtion Polymerization
What the sources say
- Not checked — no full text of the sourcecites [6] Hong, 1999, Living anionic polymerization, Curr. Opin. Solid State Mater. Sci. source
- Not checked — no full text of the sourcecites [42] Matsuo, 2004, Synthesis of well-defined dendrimer-like branched polymers and block copolymer by the iterative approach involving coupling reaction of living anionic polymer and functionalization, Macromolecules source
- Not checked — no full text of the sourcecites [43] Advincula, 2002, Polymer brushes by living anionic surface initiated polymerization on flat silicon (sio x) and gold surfaces: Homopolymers and block copolymers, Langmuir source
- Not checked — no full text of the sourcecites [44] Hirao, 2000, Synthesis of well-defined functionalized polymers and star branched polymers by means of living anionic polymerization using specially designed 1,1-diphenylethylene derivatives, Macromol. Rapid Commun. doi:10.1002/1521-3927(20001101)21:17
- Not checked — no full text of the sourcecites [45] Zhou, 2001, Living anionic surface initiated polymerization (sip) of styrene from clay surfaces, Chem. Mater. source
- Could not verifycites [46] Wojnarowska, 2017, Effect of chain rigidity on the decoupling of ion motion from segmental relaxation in polymerized ionic liquids: Ambient and elevated pressure studies, Macromolecules sourceExperimental — accuracy not yet measured
Split into 2 atoms — 0 confirmed, 0 partially supported, 0 disputed, 0 misattributed, 2 unverifiable. Expand the claim to see per-atom verdicts.
- Not checked — no full text of the sourcecites [47] Wojnarowska, Z., Feng, H., Diaz, M., Ortiz, A., Ortiz, I., Knapik-Kowalczuk, J., Vilas, M., Verdía, P., Tojo, E., and Saito, T. (2017). Revealing the charge transport mechanism in polymerized ionic liquids: Insight from high pressure conductivity studies. Chem. Mater. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
113 more claims · 8 with their cited sources checked
Create a free account to see all 189 claims and every source verdict.
- Probably not a substantial claim. 44
- It may state two separate claims as one. 35
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > 3. Self-Assembly of BCPs > 3.1. Self-Assembly in Bulk
“the self-assembly of triblock copolymers of poly(styrene-b-isoprene-b-styrene) (PS-b-PI-b-PS) has also been extensively investigated using small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) by Storey et al. and Elabd et al. [70,71].”
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > References
“70. Storey R.F. Baugh D. Poly (styrene-b-isobutylene-b-styrene) block copolymers and ionomers therefrom: Morphology as determined by small-angle x-ray scattering and transmission electron microscopy”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > 4. Applications > 4.4. Applications in Mesoporous Materials
“Recently, Wei and coworkers reported the synthesis of nitrogen-doped mesoporous carbon in the form of powder through EISA, using Pluoric copolymer as the template, with resol and dicyandiamide as sources for C and N, respectively [147].”
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > References
“147. Yang P. Zhao D. Margolese D.I. Chmelka B.F. Stucky G.D. Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > 4. Applications > 4.1. Applications as Thermoplastic Elastomers
“conventional all acrylic-based TPEs consisting of PMMA and PBA made by controlled radical processes [94]”
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > References
“94. Martín-Gomis L. Fernández-García M. de la Fuente J.L. Madruga E.L. Cerrada M.L. Physical properties of PBMA-b-PBA-b-PBMA triblock copolymers synthesized by atom transfer radical polymerization”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > 4. Applications > 4.4. Applications in Mesoporous Materials
“A large variety of mesoporous metal oxides in the form of powder were synthesized through EISA using commercial Pluronics as a template [149].”
§ Block Copolymers: Synthesis, Self-Assembly, and Applications > References
“149. Wei J. Zhou D. Sun Z. Deng Y. Xia Y. Zhao D. A controllable synthesis of rich nitrogen-doped ordered mesoporous carbon for CO2 capture and supercapacitors”
Citations
Cites
Self-assembly of block copolymers
Mai, Y., & Eisenberg, A. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35115c · Cited by 3,610
Block Copolymers—Designer Soft Materials
Bates, F. S., & Fredrickson, G. H. (1999) · Physics Today · doi:10.1063/1.882522 · Cited by 3,219 · cited 1×
“Thanks to the advancement of polymer synthetic strategies and techniques, e.g., controlled polymerization techniques along with facile post-polymerization functionalization, BCPs with precisely controlled molecular weights and defined macromolecular architectures can be prepared [2–8].”
MethodControlled/living radical polymerization: Features, developments, and perspectives
Braunecker, W. A., & Matyjaszewski, K. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.11.002 · Cited by 3,202 · cited 1×
“The preparation of BCPs using sequential CRP relies on the fact that the reactive polymer chain end is preserved by a reversible reaction between the active species and the dormant species [17–19].”
BackgroundCarbon materials for chemical capacitive energy storage
Zhai, Y., Dou, Y., Zhao, D., Fulvio, P. F., Mayes, R. T., & Dai, S. (2011) · Advanced Materials · doi:10.1002/adma.201100984 · Cited by 2,964 · cited 1×
“With these unique features, porous materials present great value for applications in energy conversion and storage [132–135], catalysis [136], drug delivery [137], gas capture [138,139], and water purification [140,141].”
BackgroundGeneralized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493 · cited 2×
“Recently, Wei and coworkers reported the synthesis of nitrogen-doped mesoporous carbon in the form of powder through EISA, using Pluoric copolymer as the template, with resol and dicyandiamide as sources for C and N, respectively [147].”
BackgroundMethodOn the controllable soft-templating approach to mesoporous silicates
Wan, Y., & Zhao (2007) · Chemical Reviews · doi:10.1021/cr068020s · Cited by 2,371 · cited 1×
“This group of materials exhibits periodically aligned structures and uniform cavities with sizes ranging from micro- (<2 nm), to meso- (2–50 nm), to macropores (>50 nm) [130], which lead to very high surface areas (up to 1500 m2/g) [131].”
BackgroundMesoporous carbon materials: Synthesis and modification
Liang, C., Li, Z., & Dai, S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702046 · Cited by 1,935 · cited 2×
“Different from a general solvent-annealing process, precursor molecules are crosslinked in EISA as the solvent evaporates, leaving no chance for structure refinement after it is formed [146,147].”
BackgroundThe Physics of Block Copolymers
Hamley, I. W. (1998) · doi:10.1093/oso/9780198502180.001.0001 · Cited by 1,913
Mesoporous silica nanoparticles for drug delivery and biosensing applications
Slowing, I. I., Trewyn, B. G., Giri, S., & Lin, V. S. ‐. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601191 · Cited by 1,699 · cited 1×
“With these unique features, porous materials present great value for applications in energy conversion and storage [132–135], catalysis [136], drug delivery [137], gas capture [138,139], and water purification [140,141].”
BackgroundBlanazs, A., Armes, S. P., & Ryan, A. J. (2009) · Macromolecular Rapid Communications · doi:10.1002/marc.200800713 · Cited by 1,500
Research works printed but not linked: 1
- Alexandridis, P., and Lindman, B. (2000). Amphiphilic Block Copolymers: Self-Assembly and Applications, Elsevier.
Cited by
Items 101–101 of 101
Polymers for the treatment of Alzheimer’s disease
Zhu, Y., Xu, H., Yu, C., Jiang, W., Hou, X., Ma, M., & Wu, J. (2025) · Frontiers in Pharmacology · doi:10.3389/fphar.2025.1512941 · Cited by 5
“These assemblies are then subjected to further processing to yield nanomicelles, vesicles, polymers and other products (Feng et al., 2017).”
Metadata
- Authors
- Feng, H., Lu, X., Wang, W., Kang, N.-G., & Mays, J.
- Affiliations
- University of Tennessee at Knoxville (US)
- Oak Ridge National Laboratory (US)
- Corresponding author
- Mays, Jimmy
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2017-10-09
- Volume
- 9
- Issue
- 10
- Pages
- 494
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC6418972
- OpenAlex
- W2762501848
- Semantic Scholar
- 88db26794feb9e7209b6797101c1c4158f6abd41
- Cited by
- 467
- References
- 163
- Citations by year
- 2026: 40 · 2025: 57 · 2024: 58 · 2023: 60 · 2022: 77 · 2021: 56 · 2020: 58 · 2019: 33 · 2018: 28
- FWCI
- 1.73
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, other-oa)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- U.S. Department of Energy
- Office of Science
- Basic Energy Sciences
- Materials Sciences and Engineering Division
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- block copolymers, block copolymer synthesis, self-assembly, polymer architecture, polymer characterization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.