Critical Evaluation of the Potential of Organic Acids for the Environmentally Friendly Recycling of Spent Lithium-Ion Batteries
Open accessThe DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Abstract
The need to recover valuable metals from spent lithium-ion batteries (LIBs) is undisputed. However, the environment and the climate are also affected by emissions from the recycling processes. Therefore, the call for environmentally friendly recycling methods is currently louder than ever. In the field of hydrometallurgical recovery of metals from spent LIBs, inorganic acids have so far proved to be an effective, but environmentally problematic, leaching agent, since the pollution of wastewater by high salt loads and the emission of toxic gases cannot be avoided. This has recently led to a trend towards the application of organic acids, as these have significantly more environmentally friendly properties. In order to continue this approach, and to improve it even further from an environmental point of view, this work focuses on the utilization of low leaching temperatures in combination with organic acids for the recovery of valuable metals from spent lithium-ion batteries. This can drastically reduce the required energy demand. Furthermore, attention is paid to higher (50–100 g·L−1) solid-liquid ratios, which are indispensable, especially with regard to the economic establishment of the tested process. The experimental verification of the feasibility using citric, oxalic, and formic acid showed the possibility of an efficient recovery of cobalt, nickel, and lithium. In particular, citric acid in combination with hydrogen peroxide as a reducing agent appears to be a suitable and environmentally friendly alternative to classical inorganic acids, even at low process temperatures, for the hydrometallurgical recycling of lithium-ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Generic composition of a NMC battery system in ( a ) total shares of materials and ( b ) divided into individual components [5,6].](https://figures.cochat.ai/paper-figures/3ec20d8d5bbf4bccb7cac109dc646bc4/critical-evaluation-of-the-potential-of-organic-acids-for-the-environmentally-figure-2.png)
![Figure 3 Chemical structure of citric, oxalic, and formic acid [38]. Figure 3. Chemical structure of citric, oxalic, and formic acid [38].](https://figures.cochat.ai/paper-figures/e9d085f915ca4a55b59ee51ce7399416/critical-evaluation-of-the-potential-of-organic-acids-for-the-environmentally-figure-3.png)
![Figure 4 Schematic illustration of the experimental setup for the hydrometallurgical treatment of active material from spent lithium-ion batteries according to [39]. Figure 4. Schematic illustration of the experimental setup for the hydrometallurgical treatment of active material from spent lithium-ion batteries according to [39].](https://figures.cochat.ai/paper-figures/4de909e1e76040939f8a4aa15b74f10e/critical-evaluation-of-the-potential-of-organic-acids-for-the-environmentally-figure-4.png)




Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“For example, the combination of citric acid with hydrogen peroxide (H2O2) has shown high recovery efficiency and reduced generation of toxic byproducts.”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [220]
The cited source says what the claim attributes to it.
In the citing paper
“Arecent study [220] demonstrated that hydrometallurgical extraction using organic acids, such as citric (C6H8O7), oxalic (C2H2O4), and formic (HCOOH) acids, in aqueous solutions, could potentially reduce environmental impact compared to traditional methods reliant on strong acids.”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [220]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recycling of Spent Lithium-Ion Battery: A Critical Review
Zeng, X., Li, J., & Singh, N. (2014) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2013.763578 · Cited by 897 · cited 1×
“Spent lithium-ion batteries often consist of a metal casing, a plastic cover, and an electric control unit [9].”
BackgroundDevelopment of a recycling process for Li-ion batteries
Georgi-Maschler, T., Friedrich, B., Weyhe, R., Heegn, H., & Rutz, M. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.152 · Cited by 836
A Mini-Review on Metal Recycling from Spent Lithium Ion Batteries
Zheng, X., Zhu, Z., Lin, X., Zhang, Y., He, Y., Cao, H., & Sun, Z. (2018) · Engineering · doi:10.1016/j.eng.2018.05.018 · Cited by 806 · cited 3×
“However, at the same time, there are enormous advantages, such as low energy requirements due to low temperatures, a high recovery rate of valuable materials, and a higher purity of these recovered materials [19,20].”
BackgroundLi, L., Ge, J., Wu, F., Chen, R., Chen, S., & Wu, B. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.11.026 · Cited by 647 · cited 7×
“However, for efficient leaching success, the presence of hydrogen peroxide is indispensable, since in the absence of this chemical, Co3O4 is formed as an intermediate product, which is particularly difficult to transfer into a solution [32,34].”
BackgroundInfluentialLi, L., Dunn, J. B., Zhang, X. X., Gaines, L., Chen, R. J., Wu, F., & Amine, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.089 · Cited by 563 · cited 2×
“By avoiding inorganic chemicals at high temperatures, emissions of sulfuric, chloridic, and nitrous gases can additionally be avoided [22].”
BackgroundOr, T., Gourley, S. W. D., Kaliyappan, K., Yu, A., & Chen, Z. (2020) · Carbon Energy · doi:10.1002/cey2.29 · Cited by 559 · cited 2×
“Another aspect is the reactivity at low temperatures and short leaching periods, which makes it likely to establish organic acids in future sustainable industrial processes [24,25].”
BackgroundDevelopment of a metal recovery process from Li-ion battery wastes
Shin, S. M., Kim, N. H., Sohn, J. S., Yang, D. H., & Kim, Y. H. (2005) · Hydrometallurgy · doi:10.1016/j.hydromet.2005.06.004 · Cited by 519 · cited 1×
“Mechanical processes that follow the deactivation are crushing, sieving, magnetic separation, fine crushing, and classification [17].”
BackgroundLithium Carbonate Recovery from Cathode Scrap of Spent Lithium-Ion Battery: A Closed-Loop Process
Gao, W., Zhang, X., Zheng, X., Lin, X., Cao, H., Zhang, Y., & Sun, Z. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.6b03320 · Cited by 507 · cited 4×
“The leaching temperature shows an improvement in leaching efficiency up to 60 ◦C due to the improved reaction kinetics, but no longer exerts a significant influence above this temperature [10].”
BackgroundInfluentialSun, L., & Qiu, K. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.07.114 · Cited by 493 · cited 2×
“, metal casing, plastic cover, cathode, and anode), thermal processes are typically used to separate the binder and carbon contents of the spent LIB from the cathode material [11,15].”
MethodGolmohammadzadeh, R., Faraji, F., & Rashchi, F. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.024 · Cited by 478 · cited 1×
“However, due to the lower acid strength, the addition of reducing agents and the extension of the leaching period are necessary in selected cases to reach efficient recovery rates [24,26].”
Background
Research works printed but not linked: 3
- 24. Gerold, E. Entwicklung Eines Hydrometallurgischen Recyclingkonzeptes für Lithium-Ionen-Batterien. Ph.D. Dissertation, Montanuniversität Leoben, Leoben, Austria, 2021.
- 38. Fanghänel, E. Organikum ; Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Germany, 2015.
- 40. Gerold, E.; Luidold, S.; Antrekowitsch, H. Decomposition of hydrogen peroxide in selected organic acids. In Proceedings of the European Metallurgical Conference, Salzburg, Austria, 27-30 June 2021.
Cited by
Balaram, V., Santosh, M., Satyanarayanan, M., Srinivas, N., & Gupta, H. (2024) · Geoscience Frontiers · doi:10.1016/j.gsf.2024.101868 · Cited by 231
A review of lithium-ion battery recycling for enabling a circular economy
Rezaei, M., Nekahi, A., R, A. K. M., Nizami, A., Li, X., Deng, S., Nanda, J., & Zaghib, K. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.236157 · Cited by 186
A review on recycling of lithium-ion batteries to recover critical metals
Mishra, G., Jha, R., Meshram, A., & Singh, K. K. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108534 · Cited by 167
Park, E., Park, J., Lee, K., Zhao, Y., Zhou, T., Park, G., Jeong, M., Choi, M., Yoo, D., Jung, H., et al. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c02003 · Cited by 154
A comprehensive review of emerging technologies for recycling spent lithium-ion batteries
Milián, Y. E., Jamett, N. E., Cruz, C., Herrera‐León, S., & Chacana-Olivares, J. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.168543 · Cited by 130
Rouquette, L. M. J., Petraniková, M., & Vieceli, N. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.124143 · Cited by 128
Recovery of rare earth metals from Ni-MH batteries: A comprehensive review
Salehi, H., Maroufi, S., Mofarah, S. S., Nekouei, R. K., & Sahajwalla, V. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113248 · Cited by 100
Recycling of Spent Lithium‐Ion Batteries in View of Lithium
Fang, J., Wan, G., Zheng, M., Liu, T., & Lu, J. B. (2025) · Advanced Energy Materials · doi:10.1002/aenm.202501318 · Cited by 75
Shi, H., Zhang, J., & Ou, L. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.160006 · Cited by 61
Schmitz, D., Prasetyo, H., Birich, A., Yeetsorn, R., & Friedrich, B. G. (2024) · Metals · doi:10.3390/met14010080 · Cited by 54
“Additionally, investigations by Gao et al. [13], Li et al. [9–11], and Gerold [14] explored the impact of H 2 O 2 addition, highlighting its role in aiding the dissolution of LIB cathodic materials.”
BackgroundGerold, E., Kadisch, F., Lerchbammer, R., & Antrekowitsch, H. (2023) · Journal of Hazardous Materials Advances · doi:10.1016/j.hazadv.2023.100397 · Cited by 62
Self-citationFarid, M. A. A., Lease, J., & Andou, Y. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142852 · Cited by 47
A comprehensive review on the recovery of lithium from lithium-ion batteries and spodumene
Ali, A., Afrin, S., Asif, A. H., Arafat, Y., & Azhar, M. R. (2025) · Journal of Environmental Management · doi:10.1016/j.jenvman.2025.126512 · Cited by 53
Kılavuz, E. (2025) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.5c00408 · Cited by 50
Deng, H., Hong, R., Wang, B., Xu, J., Yang, G., Shi, Z., He, W., & Li, G. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.132327 · Cited by 42
Ruberti, M. (2024) · Sustainability · doi:10.3390/su17010160 · Cited by 35
Lerchbammer, R., Gerold, E., & Antrekowitsch, H. (2023) · Metals · doi:10.3390/met13081330 · Cited by 34
Self-citationAlcaraz, L., Díaz-Guerra, C., Calbet, J., López, M. L., & López, F. A. (2022) · Materials · doi:10.3390/ma15093246 · Cited by 32
“Among them, sulfuric acid [25] has successfully been tested for mobilizing the metals from the solid residue to solution, while citric acid has been considered for several years as a potential alternative to inorganic acids for leaching valuable metals from lithium-ion batteries [22].”
BackgroundInfluentialPreetam, A., Modak, A., Jadhao, P. R., Naik, S. N., Pant, K. K., & Kumar, V. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108761 · Cited by 26
Sahu, S., Agrawala, M., Patra, S. R., & Devi, N. (2024) · ACS Omega · doi:10.1021/acsomega.3c08687 · Cited by 24
Mesbah, Y. I., Ahmed, N., Hasan, M. M., & Allam, N. K. (2023) · Materials Today Chemistry · doi:10.1016/j.mtchem.2023.101521 · Cited by 23
Selective lithium recovery from spent LFP Li-ion batteries using organic acids
Ali, M., Iqbal, N., Nооr, T., & Zaman, N. (2024) · Ionics · doi:10.1007/s11581-024-05960-0 · Cited by 22
“However, the use of reducing agents is required for effective recovery rates because of the low acid strength [49].”
Acetone as an agent for PVDF recovery and delamination of lithium-ion battery electrodes
Jiang, G., Lee, D., Raimbault, D., Anderson, P. A., & Leeke, G. A. (2024) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2024.107778 · Cited by 23
Amalia, D., Singh, P., Zhang, W., & Nikoloski, A. N. (2023) · Sustainability · doi:10.3390/su151713171 · Cited by 21
An overview of metals extraction and recovery from industrial wastewater sludge
Al‐Mutair, M., Kumar, R., Al‐Mur, B. A., Mohamed, O. A., & Barakat, M. A. E.-F. (2024) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.25230 · Cited by 19
Ahn, J.-W., & Cho, Y.-C. (2023) · Journal of the Korean Institute of Resources Recycling · doi:10.7844/kirr.2023.32.4.3 · Cited by 17
Morina, R., Carena, E., Pianta, N., Perona, E., Ostroman, I., Mustarelli, P., & Ferrara, C. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.122827 · Cited by 15
Locati, A., Mikulić, M., Rouquette, L. M. J., Ebin, B., & Petraniková, M. (2024) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2024.2435272 · Cited by 14
“,6–8] The first step in the hydrometallurgical recycling route is the leaching of the black mass, a mixture of cathode, and anode active materials obtained after the pre-treatment stages.”
Shrestha, A. B., & Amarasekara, A. S. (2025) · Batteries · doi:10.3390/batteries11020068 · Cited by 16
Mandl, M. M., Lerchbammer, R., & Gerold, E. (2025) · Metals · doi:10.3390/met15101112 · Cited by 13
Self-citationA Review of Direct Recycling Processes for Lithium-Ion Battery Cells
Łach, M., Przybek, A., Duda, P., & Bielaczyc, P. (2025) · Materials · doi:10.3390/ma18245608 · Cited by 16
“In fact, the introduction of innovative hydrometallurgical processes using both acids and more sustainable leaching agents is a key area of interest in ongoing research [62].”
Badre-Eddine, S., Muhr, L., & Chagnes, A. (2025) · Metals · doi:10.3390/met15060598 · Cited by 13
Conte, N., Gómez, J. M., Comino, M., Díez, E., & Rodríguez, A. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.132064 · Cited by 11
Kurniawan, K., Kim, S., Bae, M., Lee, H., & Lee, J.-C. (2025) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-025-01045-y · Cited by 11
“…H 2 SO 4 with alternative acids such as hydrochloric acid (HCl) [15] or various organic acids, including monocarboxylic acids like acetic, lactic, and gluconic acid; dicarboxylic acids like ascorbic and maleic acid; and tricarboxylic acid like citric acid, in the leaching of black mass [16, 17].”
Mušović, J., Jocić, A., & Dimitrijević, A. (2025) · Processes · doi:10.3390/pr13124015 · Cited by 11
Amarasekara, A. S., & Shrestha, A. B. (2024) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2024.106471 · Cited by 11
Enhanced Leaching of Lithium-Ion Battery Cathode Scraps with In Situ Electrogenerated Persulfates
Pradja, M. M., & Modrzynski, C. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c04940 · Cited by 9
Organic Acid Leaching of Black Mass with an LFP and NMC Mixed Chemistry
Henderson, M. S., Beh, C. C., Oraby, E. A., & Eksteen, J. J. (2025) · Recycling · doi:10.3390/recycling10040145 · Cited by 10
Insect processing for chitin production
Psarianos, M., Baliota, G. V., Rumbos, C. I., Athanassiou, C. G., Ojha, S., & Schlüter, O. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95594-2.00014-8 · Cited by 9
Mannu, A., Pietro, M. E. D., Bosello, V., Mulas, G., Ferrario, C., Murgia, F., Foddai, A. F., Magugliani, G., Mossini, E., Macerata, E., et al. (2025) · Materials Science and Engineering B · doi:10.1016/j.mseb.2025.118734 · Cited by 11
Conte, N., Gómez, J. M., Muñoz, J. Á., & Castro, L. (2025) · Journal of Hazardous Materials Advances · doi:10.1016/j.hazadv.2025.100775 · Cited by 8
Nahrowi, R., Muryanta, W. A., Manaf, A., Handoko, A. S., Prasetyo, E., Suharto, S., Susanti, D., Amrulloh, H., & Bahfie, F. (2026) · Hydrometallurgy · doi:10.1016/j.hydromet.2026.106689 · Cited by 6
Wu, P., Zheng, Q., Meng, T., Zhong, X., & Watanabe, M. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c03729 · Cited by 6
Abbas, Z., Jahankhan, M., Shin, W. S., & Jung, S. M. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.134319 · Cited by 5
Lerchbammer, R., Gerold, E., & Antrekowitsch, H. (2025) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2025.101271 · Cited by 5
Self-citationHe, Y., & Wang, R. (2026) · Energy & environment materials · doi:10.1002/eem2.70390 · Cited by 7
Navarrete-Segado, P., Melguizo, M., Lan, R., Ali, A., & Peñas, A. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104758 · Cited by 4
Crespo, Ó., Hermassi, M., Gibert, O., Cama, J., & Cortina, J. L. (2026) · Journal of Environmental Management · doi:10.1016/j.jenvman.2026.128723 · Cited by 4
Hasan, H., Eldemerdash, U. N., Murase, K., & Gepreel, M. A. H. (2026) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-026-03963-y · Cited by 4
Dube, S., & Moyo, T. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01565 · Cited by 4
Chavan, D., Mahmood, N., Kumar, S., & Eshtiaghi, N. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.146532 · Cited by 5
Low melting mixtures from waste as leaching agents for black mass processing
Mannu, A., Pietro, M. E. D., Carotti, C., Magugliani, G., Mossini, E., Macerata, E., Rozas, S., Aparício, S., & Mele, A. (2025) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2025.128161 · Cited by 3
Piloto, D. S., Espinosa, D. C. R., & Botelho, A. B. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.121066 · Cited by 3
Misleh, J., Wright, J. G., Charnay, B. P., & Kanan, M. W. (2026) · Watt · doi:10.1007/s44503-026-00003-3 · Cited by 3
Wanchan, W., Gießmann, T., Birich, A., Hoisungwan, P., & Yeetsorn, R. (2026) · Hydrometallurgy · doi:10.1016/j.hydromet.2026.106834 · Cited by 3
Aryani, M. W., Manaf, A., Prasetyo, E., Susanti, D., Handoko, A. S., Nurjaman, F., Herlina, U., Siburian, R. A. F., & Bahfie, F. (2024) · Johnson Matthey Technology Review · doi:10.1595/205651325x17170604890774 · Cited by 3
Bruno, M., Saffirio, S., Smeacetto, F., Fiorilli, S., & Fiore, S. (2025) · Batteries · doi:10.3390/batteries11040124 · Cited by 2
“For instance, organic acids or more environmentally friendly chelating agents might offer the selective recovery of target metals while reducing the environmental footprint [51,52].”
Yan, P., He, J., Lan, J., Ye, Y., Xie, X., Chen, Y., & Zeng, J. (2025) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-025-01128-w · Cited by 2
“Furthermore, organic acids typically have a high chelating ability, which allows them to efficiently dissolve and separate metals, thereby enhancing the metal recovery rate [30–32].”
Mettke, L. N., & Yagmurlu, B. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.174181 · Cited by 2
Aldana, J. L., Yurramendi, L., Antoñanzas, J., Nieto, J., & del Río, C. (2026) · Batteries · doi:10.3390/batteries12030089 · Cited by 3
“These compounds are emerging as sustainable alternatives to mineral acids in LIB hydrometallurgy because they reduce the generation of saline effluents and toxic emissions, supporting circular economy goals and compliance with environmental regulations [32].”
Rodrigues, G. D. O., Pereira, B. D. R., & Espinosa, D. C. R. (2026) · JOM · doi:10.1007/s11837-026-08300-x · Cited by 2
Ouyang, Z., Li, X., Cui, Y., Liu, H., Li, J., Shao, Z., & Zhao, P. (2026) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2026.108990 · Cited by 2
Bonfu, B. A.-A., Merah, M., Nakhaei, F., Alagha, L., Moats, M. S., & Awuah-Offei, K. (2026) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2026.2669914 · Cited by 2
Frueholz, R., Habermaier, C., Spiess, S., Birklbauer, L., Guebitz, G. M., & Haberbauer, M. (2025) · Biochemical Engineering Journal · doi:10.1016/j.bej.2025.109859 · Cited by 1
Fu, D., Jin, S., Chen, C., Zhong, Y., Tan, H., Meng, J., & Ma, Q. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.176212 · Cited by 1
Upcycling end-of-life lithium-ion battery into electrocatalysts - Turning waste into value: A review
Gunawardhana, T., Arandiyan, H., Duan, X. A., & Wang, Y. (2026) · Sustainable materials and technologies · doi:10.1016/j.susmat.2026.e02018 · Cited by 5
Deep eutectic solvents and electrochemical metal recycling: a comprehensive method review
Mukherjee, A., Apte, S., & Turkane, S. D. (2026) · Results in Chemistry · doi:10.1016/j.rechem.2026.103455 · Cited by 3
Thermodynamic formulation of coupled precipitation equilibria in heterogeneous multiligand systems
Povar, I., Bolocan, N., & Spînu, O. (2026) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2026.114799 · Cited by 1
Liu, W., Wang, B., Sun, C., Zhao, X., & Liu, S. (2026) · Hydrometallurgy · doi:10.1016/j.hydromet.2026.106849 · Cited by 1
Lerchbammer, R., Gerold, E., & Antrekowitsch, H. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.5069046 · Cited by 1
Self-citationEnergy, Environment, and Resources | Circular Economy
Gerold, E., Prenner, S., Rutrecht, B., Jandric, A., Nigl, T., & Part, F. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-96022-9.00139-0
Self-citationAnalysis of Citric Acid Recovery Technology for Recycling of Citric Acid from Waste Solution
Ahn, J.-W., Seo, M.-R., & Lee, Y. H. (2024) · Journal of the Korean Institute of Resources Recycling · doi:10.7844/kirr.2024.33.5.14
Aslan, C., Zorağa, M., Ilhan, S., & Kalpakli, A. O. (2025) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2025.130476
Feature Papers in Extractive Metallurgy
Stopić, S. R. (2025) · Metals · doi:10.3390/met15070751
Mishra, A., Sahu, R., Khajenoori, M., & Jha, S. K. (2025) · Springer Proceedings in Materials · doi:10.1007/978-981-96-7380-3_25
Rota hidrometalúrgica para reciclagem de baterias de NiMH de veículos elétricos híbridos.
Piloto, D. S. (2025) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.3.2025.tde-05112025-080258
Estudio de la lixiviación hidrotérmica de cátodos de LFP de baterías de ion litio
Varela, M. L. (2024) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas)
Colleoni, E., Restrepo-Cano, J., Wehbe, N., Canciani, C., Dhanasekaran, M., Trouche, E., Sarvothaman, V. P., Guida, P., & Roberts, W. L. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7233171
Al-Abady, A., Abdelbasir, S. M., AbdelKhalek, M. A., Seifelnassr, A. A. S., & Ibrahim, A. F. M. (2026) · Mining Metallurgy & Exploration · doi:10.1007/s42461-026-01521-3
Shrestha, A. B., Grady, T. L., & Amarasekara, A. S. (2026) · Results in Chemistry · doi:10.1016/j.rechem.2026.103365
Fahmi, R., & Pahlavanzadeh, H. (2026) · Separation Science and Technology · doi:10.1080/01496395.2026.2651750
“The leaching process, as starting point of any hydrometallurgical path, is done by using two groups of acids: inorganic acids (HCl, [12– 14] H 2 SO 4 , [13,14] and etc.), and organic acids (citric acid, [15–17] oxalic acid, [18,19] formic acid, [20] and DL-malic [21,22] ).”
Resource recovery from spent lithium iron phosphate batteries via low-temperature lithium extractionPreprint
Ali, A., Arafat, Y., Pavón, S., Razmjou, A., & Azhar, M. R. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6999937
Shamsuddin, R. A., Yakup, A. M. A., & Manogaran, M. D. (2026) · Minerals Engineering · doi:10.1016/j.mineng.2026.110748
Locati, A. (2025) · Chalmers Research (Chalmers University of Technology)
Rouquette, L. M. J. (2025) · Chalmers Research (Chalmers University of Technology) · Cited by 2
Mandl, M. M., Gerold, E., & Antrekowitsch, H. (2026) · Metals · doi:10.3390/met16091006
Self-citationGreen Leaching of Lithium and Cobalt from spent Li-ion batteries: Organic Acid–Reductant Comparison
Badr, P., & Javadpour, S. (2026) · Mining Metallurgy & Exploration · doi:10.1007/s42461-026-01706-w
Pradja, M. M., Feng, B., Dinges, I., Modrzynski, C., & Stöckl, M. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6c05001
Hui, S. R., Zambrano, O. A., & Davis, K. (2026) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-026-01650-5
Bruno, M., Zanoletti, A., E., B., & Fiore, S. (2025) · PORTO@Iris
Garcia, M. M. (. M. M. (2026) · Repositorio Digital (Escuela Politécnica Nacional)
Salah, M., Khan, F., & Alzahrani, A. (2026) · Nano Energy · doi:10.1016/j.nanoen.2026.112471
Rezaei, M. R., Sanchez-Lecuona, G., & Abdolazimi, O. (2026) · Mining Metallurgy & Exploration · doi:10.1007/s42461-026-01734-6
Solvent Systems for Sustainable Metal Extraction: From Principles to Applications
Kabangu, J. M., Tapfuma, A., Ndlovu, G., & Muller, E. (2026) · IntechOpen eBooks · doi:10.5772/intechopen.1017600
Microwave‐Assisted Leaching and Mixed Oxalates Precipitation as Closed‐Loop NMC532 Recycling Process
Gatti, C., Motta, M. G., Khan, M., Pafumi, E., & Ferrara, C. (2026) · ChemElectroChem · doi:10.1002/celc.70325
Limitations of Acid-Induced EDTA Recovery from Citrate-Based Metal Leaching Solutions
Simonov, M., Abdimomyn, S., Artur, G., Bekmagambetov, A., & Fyodor, M. (2026) · Eurasian Chemico-Technological Journal · doi:10.18321/ectj1698
Advances in Recycling of Lithium-Ion Batteries for Zero Waste Material Recovery
Raj, V., Karn, S. K., Kumari, K., Prasad, B. K., Vaibhav, V., Firdaus, F., Bisht, N., Chauhan, A. K., & Das, A. P. (2026) · Circular economy and sustainability · doi:10.1007/978-3-032-28266-8_8
Metadata
- Authors
- Gerold, E., Schinnerl, C., & Antrekowitsch, H.
- Affiliations
- Montanuniversität Leoben (AT)
- Corresponding author
- Gerold, Eva
- Venue
- Recycling
- Publisher
- MDPI AG
- Published
- 2022-01-31
- Volume
- 7
- Issue
- 1
- Pages
- 4
- ISSN
- 2313-4321 (ISSN-L)
- OpenAlex
- W4210523504
- Cited by
- 89
- References
- 33
- Citations by year
- 2026: 32 · 2025: 29 · 2024: 15 · 2023: 9 · 2022: 4
- FWCI
- 5.38
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Recycling (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Environmental Science › Waste Management and Disposal › Recycling and Waste Management Techniques
- Physical Sciences › Materials Science › Metals and Alloys › Metal Extraction and Bioleaching
- Keywords
- spent lithium-ion batteries, battery recycling, hydrometallurgical recovery, organic acids, citric acid, oxalic acid, formic acid, cobalt recovery, nickel recovery, lithium recovery, hydrogen peroxide, solid-to-liquid ratio, wastewater pollution, energy demand reduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.