Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.

Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology

Open access
Gomez, Carles, Oller, Joaquim, Paradells, Josep · 2012 · Sensors

Abstract

Bluetooth Low Energy (BLE) is an emerging low-power wireless technology developed for short-range control and monitoring applications that is expected to be incorporated into billions of devices in the next few years. This paper describes the main features of BLE, explores its potential applications, and investigates the impact of various critical parameters on its performance. BLE represents a trade-off between energy consumption, latency, piconet size, and throughput that mainly depends on parameters such as connInterval and connSlaveLatency. According to theoretical results, the lifetime of a BLE device powered by a coin cell battery ranges between 2.0 days and 14.1 years. The number of simultaneous slaves per master ranges between 2 and 5,917. The minimum latency for a master to obtain a sensor reading is 676 µs, although simulation results show that, under high bit error rate, average latency increases by up to three orders of magnitude. The paper provides experimental results that complement the theoretical and simulation findings, and indicates implementation constraints that may reduce BLE performance.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/s120911734

Cites

17 of 17 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1. (a) BLE protocol stack; (b) structure of a BLE data unit (note: the size of each field is expressed in bytes).
Figure 1. (a) BLE protocol stack; (b) structure of a BLE data unit (note: the size of each field is expressed in bytes).CC BY · PubMed Central
Figure 2. Theoretical lifetime of a slave for one-way and round-trip ATT message exchanges, and for different parameter configurations, based on CC2540 current measurements [11].
Figure 2. Theoretical lifetime of a slave for one-way and round-trip ATT message exchanges, and for different parameter configurations, based on CC2540 current measurements [11].CC BY · PubMed Central
Figure 3. Experimental setup used for measuring the current consumption of a CC2540 slave. The devices on the left and on the right of the picture are configured as the master and the slave, respectively. The slave is connected to the power analyzer. (Note: the screen of the power analyzer shows the current consumption due to the transmission of the three advertising packets of an advertising event (see Subsection 2.3)).
Figure 3. Experimental setup used for measuring the current consumption of a CC2540 slave. The devices on the left and on the right of the picture are configured as the master and the slave, respectively. The slave is connected to the power analyzer. (Note: the screen of the power analyzer shows the current consumption due to the transmission of the three advertising packets of an advertising event (see Subsection 2.3)).CC BY · PubMed Central
Figure 4. Average current consumption measured in a CC2540 slave, for the ATT one-way communication and connSlaveLatency = 0.
Figure 4. Average current consumption measured in a CC2540 slave, for the ATT one-way communication and connSlaveLatency = 0.CC BY · PubMed Central
Figure 5. Theoretically expected slave lifetime for various connInterval and connSlaveLatency settings (which yield a notification rate of 0.5 Hz for BER = 0), for different BER values.
Figure 5. Theoretically expected slave lifetime for various connInterval and connSlaveLatency settings (which yield a notification rate of 0.5 Hz for BER = 0), for different BER values.CC BY · PubMed Central
Figure 6. Average latency for one-way and round-trip message exchanges, for various connInterval and BER values.
Figure 6. Average latency for one-way and round-trip message exchanges, for various connInterval and BER values.CC BY · PubMed Central
Figure 7. Latency measurement of a one-way ATT exchange, performed on the basis of a CC2540 slave current consumption plot. The marker m1 is placed at the start of the reception of the poll packet from the master. The marker m2 is placed at the end of the notification transmission.
Figure 7. Latency measurement of a one-way ATT exchange, performed on the basis of a CC2540 slave current consumption plot. The marker m1 is placed at the start of the reception of the poll packet from the master. The marker m2 is placed at the end of the notification transmission.CC BY · PubMed Central
Figure 8. Theoretical maximum number of slaves per piconet for various types of interactions between devices and scheduling schemes.
Figure 8. Theoretical maximum number of slaves per piconet for various types of interactions between devices and scheduling schemes.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 17 references

Cited by

See all 969

Metadata

Authors
Gomez, C., Oller, J., & Paradells, J.
Affiliations
  • Universitat Politècnica de Catalunya/Fundació i2Cat, C/Esteve Terradas, 7, Castelldefels 08860, Spain
  • i2CAT (ES)
Venue
Sensors
Publisher
MDPI AG
Published
2012-08-29
Volume
12
Issue
9
Pages
11734-11753
ISSN
1424-8220 (ISSN-L)
OpenAlex
W1971130353
Cited by
967
References
17
Citations by year
2026: 34 · 2025: 51 · 2024: 48 · 2023: 42 · 2022: 47 · 2021: 68 · 2020: 100 · 2019: 105 · 2018: 128 · 2017: 120 · 2016: 108 · 2015: 68 · 2014: 34 · 2013: 13
FWCI
48.24
Type
journal article
Language
en
Open access
Locations
  • Sensors (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
  • Physical Sciences › Engineering › Biomedical Engineering › Wireless Body Area Networks
  • Physical Sciences › Computer Science › Computer Networks and Communications › Energy Efficient Wireless Sensor Networks
Keywords
Bluetooth Low Energy, low-power wireless communication, energy consumption, throughput, battery life, coin cell batteries, bit error rate, sensor networks

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology. https://app.cochat.ai/papers/10.3390/s120911734
The paper
Gomez, C., Oller, J., & Paradells, J. (2012). Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology. Sensors. https://doi.org/10.3390/s120911734

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.