Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology
Open accessThe DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
Bluetooth Low Energy (BLE) is an emerging low-power wireless technology developed for short-range control and monitoring applications that is expected to be incorporated into billions of devices in the next few years. This paper describes the main features of BLE, explores its potential applications, and investigates the impact of various critical parameters on its performance. BLE represents a trade-off between energy consumption, latency, piconet size, and throughput that mainly depends on parameters such as connInterval and connSlaveLatency. According to theoretical results, the lifetime of a BLE device powered by a coin cell battery ranges between 2.0 days and 14.1 years. The number of simultaneous slaves per master ranges between 2 and 5,917. The minimum latency for a master to obtain a sensor reading is 676 µs, although simulation results show that, under high bit error rate, average latency increases by up to three orders of magnitude. The paper provides experimental results that complement the theoretical and simulation findings, and indicates implementation constraints that may reduce BLE performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2. Theoretical lifetime of a slave for one-way and round-trip ATT message exchanges, and for different parameter configurations, based on CC2540 current measurements [11].](https://figures.cochat.ai/paper-figures/02304470230d427db90ed7f88e88237c/overview-and-evaluation-of-bluetooth-low-energy-an-emerging-low-power-wireless-figure-2.jpg)






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Haartsen, J. C. (2000) · IEEE Personal Communications · doi:10.1109/98.824570 · Cited by 643 · cited 1×
“BLE PROTOCOL STACK OVERVIEW Like in classic Bluetooth [7], the BLE protocol stack is composed of two main parts: the Controller and the Host.”
BackgroundApplications, challenges, and prospective in emerging body area networking technologies
Patel, M., & Wang, J. (2010) · IEEE Wireless Communications · doi:10.1109/mwc.2010.5416354 · Cited by 638 · cited 1×
“Healthcare, wellness and sports constitute an application domain where classic Bluetooth has already been used [14,15], and for which BLE constitutes an improvement [16].”
BackgroundWireless home automation networks: A survey of architectures and technologies
Gomez, C., & Paradells, J. (2010) · IEEE Communications Magazine · doi:10.1109/mcom.2010.5473869 · Cited by 557 · cited 1×
“been steadily gaining momentum in application domains that require multihop networking [2, 3].”
BackgroundSelf-citationMan-in-the-Middle Attack to the HTTPS Protocol
Callegati, F., Cerroni, W., & Ramilli, M. (2009) · IEEE Security & Privacy Magazine · doi:10.1109/msp.2009.12 · Cited by 347 · cited 1×
“When none of the first two methods can be used, the Just Works method is employed, although it is not authenticated and it does not provide protection against Man In The Middle (MITM) attacks [10].”
MethodExtending IP to Low-Power, Wireless Personal Area Networks
Hui, J. W., & Culler, D. E. (2008) · IEEE Internet Computing · doi:10.1109/mic.2008.79 · Cited by 280 · cited 1×
“In fact, the IETF 6LoWPAN Working Group (WG) [5] has already recognized the importance of BLE for the Internet of Things.”
BackgroundConnecting low-power and lossy networks to the internet
Ko, J., Terzis, A., Dawson-Haggerty, S., Culler, D. E., Hui, J. W., & Levis, P. (2011) · IEEE Communications Magazine · doi:10.1109/mcom.2011.5741163 · Cited by 207 · cited 1×
“While delivery delay may be tolerated for certain sensor measurement reading applications, a user that presses a button in a remote control is sensitive to delays greater than 500 ms [12].”
BackgroundReliability and Availability Evaluation of Wireless Sensor Networks for Industrial Applications
Silva, I., Guedes, L. A., Portugal, P., & Vasques, F. (2012) · Sensors · doi:10.3390/s120100806 · Cited by 189 · cited 1×
“4e specification [21].”
Continua: An Interoperable Personal Healthcare Ecosystem
Carroll, R., Cnossen, R., Schnell, M., & Simons, D. (2007) · IEEE Pervasive Computing · doi:10.1109/mprv.2007.72 · Cited by 159 · cited 1×
“In fact, the Continua Health Alliance, an industry coalition of healthcare and technology companies [17], announced the selection of BLE for “activity monitors and heart rate sensors to be used to monitor a user‟s health and fitness levels” [18].”
BackgroundBluetooth low energy: Wireless connectivity for medical monitoring
Omre, A. H., & Keeping, S. (2010) · Journal of Diabetes Science and Technology · doi:10.1177/193229681000400227 · Cited by 96 · cited 1×
“In fact, the Continua Health Alliance, an industry coalition of healthcare and technology companies [17], announced the selection of BLE for “activity monitors and heart rate sensors to be used to monitor a user‟s health and fitness levels” [18].”
BackgroundA Decentralized Scheduling Algorithm for Time Synchronized Channel Hopping
Tinka, A., Watteyne, T., & Pister, K. S. J. (2010) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-642-17994-5_14 · Cited by 93
Cited by
Internet of Things: Architectures, Protocols, and Applications
Sethi, P., & Sarangi, S. R. (2017) · Journal of Electrical and Computer Engineering · doi:10.1155/2017/9324035 · Cited by 1,706
“The functionalities of upper layers are included in the host [62].”
BackgroundBariya, M., Nyein, H. Y. Y., & Javey, A. (2018) · Nature Electronics · doi:10.1038/s41928-018-0043-y · Cited by 1,486
Internet of Things in the 5G Era: Enablers, Architecture, and Business Models
Palattella, M. R., Dohler, M., Grieco, A., Rizzo, G., Torsner, J., Engel, T., & Ladid, L. (2016) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2016.2525418 · Cited by 1,459
“Manuscript received August, 2015; revised XXX, 2015. such as Bluetooth Low Energy in Personal Area Networks [3], and Zigbee in Home Automation systems [4].”
BackgroundMethodA Survey on 5G Networks for the Internet of Things: Communication Technologies and Challenges
Akpakwu, G. A., Silva, B. J., Hancke, G. P., & Abu-Mahfouz, A. M. (2018) · IEEE Access · doi:10.1109/access.2017.2779844 · Cited by 1,293
Security for the Internet of Things: A Survey of Existing Protocols and Open Research Issues
Granjal, J., Monteiro, E., & Sa Silva, J. (2015) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2388550 · Cited by 1,128
“of communications using Bluetooth Low Energy (BLE) [29], Digital Enhanced Cordless Telecommunications Ultra Low En-”
MethodA survey of intrusion detection in Internet of Things
Zarpelão, B. B., Miani, R. S., Kawakani, C. T., & de Alvarenga, S. C. (2017) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2017.02.009 · Cited by 1,022
“The GAP defines some possible operation modes for BLE devices (AlFuqaha et al., 2015; Gomez et al., 2012).”
BackgroundA Survey on the Role of IoT in Agriculture for the Implementation of Smart Farming
Farooq, M. S., Riaz, S., Abid, A., Abid, K., & Naeem, M. A. (2019) · IEEE Access · doi:10.1109/access.2019.2949703 · Cited by 896
“EPC-Global (designed for RFID technologies) [39] and Z-wave (particularly designed for domotics) [40] have also been used as alternative of IEEE 802.”
MethodInternet of Things: A survey on the security of IoT frameworks
Ammar, M., Russello, G., & Crispo, B. (2018) · Journal of Information Security and Applications · doi:10.1016/j.jisa.2017.11.002 · Cited by 850
IoT: Internet of Threats? A Survey of Practical Security Vulnerabilities in Real IoT Devices
Meneghello, F., Calore, M., Zucchetto, D., Polese, M., & Zanella, A. (2019) · IEEE Internet of Things Journal · doi:10.1109/jiot.2019.2935189 · Cited by 799
“4 GHz ISM band and uses 40 channels with a 2 MHz spacing [70].”
BackgroundMethodDigital Twin: Vision, Benefits, Boundaries, and Creation for Buildings
Khajavi, S. H., Motlagh, N. H., Jaribion, A., Werner, L. C., & Holmstrom, J. (2019) · IEEE Access · doi:10.1109/access.2019.2946515 · Cited by 597
“In contrast to Zigbee, BLE communication technology is widely and out of the box available in consumer electronic devices [63] such as laptops, smartphones, and in our case, Raspberry Pi 3B+.”
BackgroundJia, M., Komeily, A., Wang, Y., & Srinivasan, R. S. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.01.023 · Cited by 597
Yetisen, A. K., Martinez‐Hurtado, J. L., Ünal, B., Khademhosseini, A., & Butt, H. (2018) · Advanced Materials · doi:10.1002/adma.201706910 · Cited by 569
Internet of Things (IoT) communication protocols: Review
Al-Sarawi, S., Anbar, M., Alieyan, K., & Alzubaidi, M. (2017) · 2017 8th International Conference on Information Technology (ICIT) · doi:10.1109/icitech.2017.8079928 · Cited by 512
A Survey of Selected Indoor Positioning Methods for Smartphones
Davidson, P., & Piche, R. (2017) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2016.2637663 · Cited by 515
“A BLE beacon is self-contained and very small, roughly the size of a coin and it is in sleep mode most of the time and only wakes up when a connection is initiated [34].”
BackgroundEvolution of Indoor Positioning Technologies: A Survey
Brena, R. F., García-Vázquez, J. P., Galván-Tejada, C. E., Muñoz-Rodriguez, D., Vargas-Rosales, C., & Fangmeyer, J. (2017) · Journal of Sensors · doi:10.1155/2017/2630413 · Cited by 478
“It takes advantage of the short range of BLE in order to determine when the user is in the proximity of a beacon.”
BackgroundShao, Y., Ying, Y., & Ping, J. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00587k · Cited by 472
A Survey on Emerging SDN and NFV Security Mechanisms for IoT Systems
Farris, I., Taleb, T., Khettab, Y., & Song, J. (2019) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2018.2862350 · Cited by 402
“11ah, and Bluetooth Low Energy (BLE) [43] are the most widely”
BackgroundInfluentialIoT-Enabled Smart Cities: A Review of Concepts, Frameworks and Key Technologies
Bellini, P., Nesi, P., & Pantaleo, G. (2022) · Applied Sciences · doi:10.3390/app12031607 · Cited by 374
“…exploit wireless technologies, such as Wi-Fi, Zigbee, long range wide-area network (LoRaWAN), Sigfox and 5G. Bluetooth and Bluetooth Low Energy [16] are low-power wireless communication technologies designed for personal area networks (PANs), which are suitable for low-bandwidth data…”
BackgroundBLE Beacons for Internet of Things Applications: Survey, Challenges, and Opportunities
Jeon, K. E., She, J., Soonsawad, P., & Ng, P. C. (2018) · IEEE Internet of Things Journal · doi:10.1109/jiot.2017.2788449 · Cited by 391
“is BLE beacons and their promising features for IoT development, interested readers should refer to [43] and [44] for a detailed description about Bluetooth Smart Ready and other roles of BLE (i.”
BackgroundA review of smart building sensing system for better indoor environment control
Dong, B., Prakash, V., Feng, F., & O'Neill, Z. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.06.025 · Cited by 360
Ghaleb, B., Al-Dubai, A. Y., Ekonomou, E., Alsarhan, A., Nasser, Y., Mackenzie, L. M., & Boukerche, A. (2019) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2018.2874356 · Cited by 333
Internet of Health Things: Toward intelligent vital signs monitoring in hospital wards
da Costa, C. A., Pasluosta, C. F., Eskofier, B., da Silva, D. B., & da Rosa Righi, R. (2018) · Artificial Intelligence in Medicine · doi:10.1016/j.artmed.2018.05.005 · Cited by 273
Maceira-Elvira, P., Popa, T., Schmid, A.-C., & Hummel, F. C. (2019) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/s12984-019-0612-y · Cited by 265
Kassab, W., & Darabkh, K. A. (2020) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2020.102663 · Cited by 259
Wireless Communication and Security Issues for Cyber–Physical Systems and the Internet-of-Things
Burg, A., Chattopadhyay, A., & Lam, K.-Y. (2018) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2780172 · Cited by 257
“1) Bluetooth LE: The Bluetooth LE [40] standard has been developed to close the energy-efficiency gap between ZigBee and Bluetooth for nonstreaming sensor-node-type applications.”
Alfian, G., Syafrudin, M., Ijaz, M. F., Syaekhoni, M. A., Fitriyani, N. L., & Rhee, J. (2018) · Sensors · doi:10.3390/s18072183 · Cited by 248
“The best solution to fulfil such requirements is BLE [21], which is emerging as a key enabler of the IoT and allows the use of BLE-enabled devices such as smartphones as gateways responsible for collecting data from the sensor node via BLE [18].”
BackgroundIndoor Air Quality Monitoring Systems Based on Internet of Things: A Systematic Review
Saini, J., Dutta, M., & Marques, G. (2020) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph17144942 · Cited by 224
“It is crucial to work on the development of IAQ monitoring systems with low power consumption requirements [110].”
BackgroundPerformance Evaluation of Bluetooth Low Energy: A Systematic Review
Tosi, J., Taffoni, F., Santacatterina, M., Sannino, R., & Formica, D. (2017) · Sensors · doi:10.3390/s17122898 · Cited by 243
“There are two main communication modalities the master can use to exchange data with the slave [50]: • In one-way ATT communication, the slave sends a simple notification in response to a poll from the master .”
BackgroundResultInfluentialA Rigid-Flex Wearable Health Monitoring Sensor Patch for IoT-Connected Healthcare Applications
Wu, T., Wu, F., Qiu, C., Redoute, J.-M., & Yuce, M. R. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.2977164 · Cited by 224
“) [52].”
Recent Advances in Internet of Things Solutions for Early Warning Systems: A Review
Esposito, M., Palma, L., Belli, A., Sabbatini, L., & Pierleoni, P. (2022) · Sensors · doi:10.3390/s22062124 · Cited by 193
“In BLE, there is a trade-off between energy consumption, latency, piconet size, and throughput, but parameters tuning allows BLE to be optimized for different IoT applications [32].”
BackgroundIjaz, M., Alfian, G., Syafrudin, M., & Rhee, J. (2018) · Applied Sciences · doi:10.3390/app8081325 · Cited by 207
A State-of-the-Art Survey of Indoor Positioning and Navigation Systems and Technologies
Sakpere, W., Adeyeye Oshin, M., & Mlitwa, N. B. (2017) · South African Computer Journal · doi:10.18489/sacj.v29i3.452 · Cited by 194
Fitriyani, N. L., Syafrudin, M., Alfian, G., & Rhee, J. (2019) · IEEE Access · doi:10.1109/access.2019.2945129 · Cited by 188
“BLE is a common communication protocol for gathering sensor data wirelessly with low power consumption [66], [67].”
BackgroundSensors and Systems for Wearable Environmental Monitoring Toward IoT-Enabled Applications: A Review
Mamun, M. A. A., & Yuce, M. R. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2919352 · Cited by 180
“Bluetooth [62], [63] is a low power and low cost specification that operates in license free 2.”
BackgroundMarques, G., Pitarma, R., M. Garcia, N., & Pombo, N. (2019) · Electronics · doi:10.3390/electronics8101081 · Cited by 181
“Furthermore, other communication technologies are used for short-range communications, such as radio frequency identifications (RFIDs) [36], near field communication (NFC) [37], and Bluetooth low energy (BLE) [38].”
BackgroundSmart City IoT Platform Respecting GDPR Privacy and Security Aspects
Badii, C., Bellini, P., Difino, A., & Nesi, P. (2020) · IEEE Access · doi:10.1109/access.2020.2968741 · Cited by 177
“4 or Bluetooth Low Energy, BLE, [2]) are sold in increasing quantities and are already able to support scenarios for smart homes, energy metering and industrial automation.”
BackgroundInfluentialBluetooth Low Energy Mesh Networks: A Survey
Darroudi, S., & Gomez, C. (2017) · Sensors · doi:10.3390/s17071467 · Cited by 172
“This allows low-energy communication between the latter and other devices such as sensors, actuators, wearables, etc. [2].”
BackgroundMethodInfluentialZahmatkesh, H., & Al-Turjman, F. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2020.102139 · Cited by 169
Zhang, J., Li, G., Marshall, A., Hu, A., & Hanzo, L. (2020) · IEEE Access · doi:10.1109/access.2020.3012006 · Cited by 169
“In contrast to IEEE 802.15.4, Bluetooth uses a single-hop solution, which is suitable for healthcare devices and consumer electronics [88].”
BackgroundInfluentialSmall Cells in the Forthcoming 5G/IoT: Traffic Modelling and Deployment Overview
Al-Turjman, F., Ever, E., & Zahmatkesh, H. (2019) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2018.2864779 · Cited by 167
“The protocol stack of BLE is described in [92].”
BackgroundMethodInternet of Things for enabling smart environments: A technology-centric perspective
Gómez, C., Chessa, S., Fleury, A., Roussos, G., & Preuveneers, D. (2019) · Journal of Ambient Intelligence and Smart Environments · doi:10.3233/ais-180509 · Cited by 174
“BLE was released in 2010 as a low-energy variant of classic Bluetooth [37].”
Barua, A., Alamin, M. A. A., Hossain, M. S., & Hossain, E. (2022) · IEEE Open Journal of the Communications Society · doi:10.1109/ojcoms.2022.3149732 · Cited by 198
Mansour, M., Darweesh, M. S., & Soltan, A. (2024) · Alexandria Engineering Journal · doi:10.1016/j.aej.2024.01.021 · Cited by 189
A Portable Wearable Tele-ECG Monitoring System
Özkan, H., Özhan, O., Karadana, Y., Gulcu, M., Macit, S., & Husain, F. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2895484 · Cited by 153
Rapid Fabrication of Soft, Multilayered Electronics for Wearable Biomonitoring
Bartlett, M. D., Markvicka, E. J., & Majidi, C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602733 · Cited by 150
Madan, P., Singh, V. K., Chaudhari, V., Albagory, Y. A., Dumka, A., Singh, R., Gehlot, A., Rashid, M. U., Alshamrani, S. S., & AlGhamdi, A. S. (2022) · Applied Sciences · doi:10.3390/app12083989 · Cited by 156
“In order to evaluate the effectiveness of the proposed framework, the results were compared with the similar and recent existing methods such as CNN [50], Bi-LSTM [52], DNN [53], and a combination of CNN-LSTM [54], and CNN-Bi-LSTM for the classification of Type 2 diabetes over PIDD [14].”
BackgroundMethodInfluentialWearable Medical Sensor-Based System Design: A Survey
Mosenia, A., Sur-Kolay, S., Raghunathan, A., & Jha, N. K. (2017) · IEEE Transactions on Multi-Scale Computing Systems · doi:10.1109/tmscs.2017.2675888 · Cited by 143
“TABLE 1 Common WMSs Sensor Description Accelerometer measures changes in the acceleration of the device caused by user’s movements Blood pressure sensor measures systolic and diastolic blood pressures Electrocardiogram sensor measures the electrical activity of the heart Electroencephalogram sensor measures the electr…”
BackgroundSilent Speech Interfaces for Speech Restoration: A Review
González, J. A., Gomez-Alanis, A., Martín-Doñas, J. M., Pérez-Córdoba, J. L., & Gomez, A. M. (2020) · IEEE Access · doi:10.1109/access.2020.3026579 · Cited by 188
“In this respect, various alternatives have been proposed, such as Bluetooth Low Energy [280], IEEE 802.”
MethodInfluentialDoes BTLE measure up against WiFi? A comparison of indoor location performance
Zhao, X., Xiao, Z., Markham, A., Trigoni, N., & Ren, Y. (2014) · Oxford University Research Archive (ORA) (University of Oxford) · Cited by 140
A Survey of Protocols and Standards for Internet of Things
Salman, T., & Jain, R. K. (2017) · doi:10.34048/2017.1.f3 · Cited by 145
Low-Power Wireless for the Internet of Things: Standards and Applications
Nikoukar, A., Raza, S., Poole, A., Güneş, M., & Dezfouli, B. (2018) · IEEE Access · doi:10.1109/access.2018.2879189 · Cited by 158
“For instance, Gomez et al. [107] and Darroudi and Gomez [264] review the BLE standard from a protocol stack point of view and research to provide a BLE mesh network, respectively.”
BackgroundThe Role of Smart Meters in Enabling Real-Time Energy Services for Households: The Italian Case
Pitì, A., Verticale, G., Rottondi, C., Capone, A., & Schiavo, L. L. (2017) · Energies · doi:10.3390/en10020199 · Cited by 137
“• BLE [58] aims at reducing the power consumption of the legacy Bluetooth for application to long-lasting battery-powered devices.”
BackgroundInfluentialA survey of IoT protocols and their security issues through the lens of a generic IoT stack
Tournier, J., Lesueur, F., Mouël, F. L., Guyon, L., & Ben-Hassine, H. (2020) · Internet of Things · doi:10.1016/j.iot.2020.100264 · Cited by 143
“The following sections present an overview of each layer of the BLE stack [59].”
BackgroundLeveraging blockchain for ensuring trust in IoT: A survey
Kumar, R., & Sharma, R. (2021) · Journal of King Saud University - Computer and Information Sciences · doi:10.1016/j.jksuci.2021.09.004 · Cited by 157
A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects
Abbas, Z., & Yoon, W. (2015) · Sensors · doi:10.3390/s151024818 · Cited by 144
“…energy consumption, the impact of using IoT gateways as proxies on energy consumption, relationship between duty cycling and energy consumption, routing mechanisms for BLE energy consumption, and the influence of IoT data delivery protocols on energy consumption, in the literature [79 – 82 , 92 ].”
MethodResultInfluentialA Novel 3-D Indoor Localization Algorithm Based on BLE and Multiple Sensors
Yu, Y., Chen, R., Chen, L., Zheng, X., Wu, D., Li, W., & Wu, Y. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3055794 · Cited by 136
“Due to the low cost characteristic of BLE nodes, the BLE-based location source has become popular in applications of indoor localization [20].”
BackgroundMAC Layer Protocols for Internet of Things: A Survey
de Oliveira, L. C. C., Rodrigues, J. J. P. C., Kozlov, S. A., Rabêlo, R. A. L., & de Albuquerque, V. H. C. (2019) · Future Internet · doi:10.3390/fi11010016 · Cited by 153
“This is Z-Wave mesh topology formed [65].”
Utilizing Blockchain to Overcome Cyber Security Concerns in the Internet of Things: A Review
Alotaibi, B. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2935035 · Cited by 135
“devices that use a low data rate in a limited range and send and receive a small quantity of data, BLE is the right choice [39].”
BackgroundNETWORKING PROTOCOLS AND STANDARDS FOR INTERNET OF THINGS
Salman, T., & Jain, R. K. (2016) · Wiley eBooks · doi:10.1002/9781119173601.ch13 · Cited by 141
Laya, A., Kalalas, C., Vázquez-Gallego, F., Alonso, L., & Alonso-Zárate, J. (2016) · IEEE Access · doi:10.1109/access.2016.2557758 · Cited by 150
“BLE is gaining momentum in several control and monitoring applications [6].”
BackgroundA Survey on Secure Communication Protocols for IoT Systems
Dragomir, D., Gheorghe, L., Costea, S., & Radovici, A. (2016) · International Workshop Secure Internet Things · doi:10.1109/siot.2016.012 · Cited by 140
“BLE defines three shared keys for security purposes, all of them 128-bit long [48]:”
Crowdsensing in Smart Cities: Overview, Platforms, and Environment Sensing Issues
Alvear, O., Calafate, C., Cano, J.-C., & Manzoni, P. (2018) · Sensors · doi:10.3390/s18020460 · Cited by 118
“Bluetooth Low Energy [47], or Bluetooth Smart , is the name under which Bluetooth version 4 is known.”
BackgroundA Precise Dead Reckoning Algorithm Based on Bluetooth and Multiple Sensors
Yu, N., Zhan, X., Zhao, S., Wu, Y., & Feng, R. (2017) · IEEE Internet of Things Journal · doi:10.1109/jiot.2017.2784386 · Cited by 117
“The technology allows BLE devices to use a button battery, which could even work for several years [6].”
CPS-Based Smart Warehouse for Industry 4.0: A Survey of the Underlying Technologies
Liu, X., Cao, J., Yang, Y., & Jiang, S. (2018) · Computers · doi:10.3390/computers7010013 · Cited by 127
“For example, in early 2012, Amazon spent $775 million to build Kiva system, in which smart robots are used to carry and arrange goods in the warehouse.”
BackgroundBluetooth for Internet of Things: A fuzzy approach to improve power management in smart homes
Collotta, M., & Pau, G. (2015) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2015.01.005 · Cited by 124
Low-Power Wide-Area Networks: Comparison of LoRaWAN and NB-IoT Performance
Marini, R., Mikhaylov, K., Pasolini, G., & Buratti, C. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3176394 · Cited by 111
“Some of these are prevalent in a specific application domain, such as Bluetooth low energy in personal area networks [1] and Zigbee in home automation systems [2].”
BackgroundApplication Domains, Evaluation Data Sets, and Research Challenges of IoT: A Systematic Review
Lohiya, R., & Thakkar, A. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.3048439 · Cited by 129
“The network layer constitutes of infrastructure protocols, such as ZigBee [44], Z -wave [45], Bluetooth low energy (BLE) [46], and LTE-A [40], [47].”
BackgroundIoT in Healthcare: Achieving Interoperability of High-Quality Data Acquired by IoT Medical Devices
Mavrogiorgou, A., Kiourtis, A., Perakis, Κ., Pitsios, S., & Kyriazis, D. (2019) · Sensors · doi:10.3390/s19091978 · Cited by 126
“In more detail, this mechanism implements a Bluetooth interface, based upon the Bluetooth Low-Energy (BLE) [22], thus being able to communicate with devices that can be recognized and connected only via Bluetooth.”
MethodMachine learning and internet of things in industry 4.0: A review
Rahman, M. S., Ghosh, T., Aurna, N. F., Kaiser, M. S., Anannya, M., & Hosen, A. S. M. S. (2023) · Measurement Sensors · doi:10.1016/j.measen.2023.100822 · Cited by 150
BlueSentinel: a first approach using iBeacon for an energy efficient occupancy detection system
Conte, G., MARCHI, M. D., Nacci, A. A., Rana, V., & Sciuto, D. (2014) · ACM International Conference on Systems for Energy-Efficient Buildings, Cities, and Transportation (BuildSys) · doi:10.1145/2674061.2674078 · Cited by 143
“As stated in [17], BLE can benefit from the widespread use of the Bluetooth technology, because it could be easily integrated into classic Bluetooth architectures.”
BackgroundWearable Biofuel Cells: Advances from Fabrication to Application
Wu, H., Zhang, Y., Kjøniksen, A., Zhou, X., & Zhou, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202103976 · Cited by 114
Montori, F., Bedogni, L., Felice, M. D., & Bononi, L. (2018) · Pervasive and Mobile Computing · doi:10.1016/j.pmcj.2018.08.002 · Cited by 117
“4 GHz frequency bands specifying 40 channels with 2 MHz channel spacing and uses the GFSK modulation scheme [63], as well as a 128 bit AES encryption.”
MethodIn-Vehicle Networking: Protocols, Challenges, and Solutions
Huang, J., Zhao, M., Zhou, Y., & Xing, C.-C. (2018) · IEEE Network · doi:10.1109/mnet.2018.1700448 · Cited by 100
“Comparison of WiFi, Bluetooth and wireless USB [4–6].”
The Bluetooth Mesh Standard: An Overview and Experimental Evaluation
Baert, M., Rossey, J., Shahid, A., & Hoebeke, J. (2018) · Sensors · doi:10.3390/s18082409 · Cited by 106
“A performance evaluation on Bluetooth Low Energy advertising mode and connection oriented mode is available in [8,9].”
Wearable Sensors Integrated with Internet of Things for Advancing eHealth Care
Bayo-Montón, J.-L., Martínez-Millana, A., Han, W., Fernández-Llatas, C., Sun, Y., & Traver, V. (2018) · Sensors · doi:10.3390/s18061851 · Cited by 110
“The main key performance indicator is the latency, which is defined as the difference of time between the start of the transmission of the first message and the end of the correct reception of the last message [18].”
BackgroundResultPerformance Analysis of Neighbor Discovery Process in Bluetooth Low-Energy Networks
Jeon, W. S., Dwijaksara, M. H., & Jeong, D. G. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2016.2558194 · Cited by 96
“various IoT applications [3].”
BLoc: CSI-based accurate localization for BLE tags
Ayyalasomayajula, R., Vasisht, D., & Bharadia, D. (2018) · ACM International Conference on emerging Networking EXperiments and Technologies (CoNEXT) · doi:10.1145/3281411.3281428 · Cited by 97
“We refer the reader to [12] for a detailed description of the BLE protocol.”
MethodThe State-of-the-Art of Sensors and Environmental Monitoring Technologies in Buildings
Hayat, H., Griffiths, T. H., Brennan, D., Lewis, R. P., Barclay, M., Weirman, C., Philip, B., & Searle, J. R. (2019) · Sensors · doi:10.3390/s19173648 · Cited by 111
“0 called Bluetooth Low Energy (BLE) was introduced by the Bluetooth SIG (Special Interest Group) [98].”
MethodData sensing and analysis: Challenges for wearables
Williamson, J. A., Liu, Q., Lu, F., Mohrman, W., Li, K., Dick, R. P., & Shang, L. (2015) · Asia and South Pacific Design Automation Conference (ASP-DAC) · doi:10.1109/aspdac.2015.7058994 · Cited by 116
“Among existing wireless communication solutions, Bluetooth Low Energy (BLE) has become the de facto communication interface for wearables [5, 19], and is supported by most mobile phone platforms.”
BackgroundBluetooth low energy for wearable sensor-based healthcare systems
Zhang, T., Lu, J., Hu, F., & Hao, Q. (2014) · 2014 IEEE Healthcare Innovation Conference (HIC) · doi:10.1109/hic.2014.7038922 · Cited by 91
“The BLE GAP is the highest level of a BLE stack, with the functionalities of management of the established connection and security [3].”
BackgroundInfluentialEnergy harvesting and strain sensing in smart tire for next generation autonomous vehicles
Maurya, D., Kumar, P., Khaleghian, S., Sriramdas, R., Kang, M., Kishore, R. A., Kumar, V., Song, H.-C., Park, J. M., Taheri, S., et al. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.09.183 · Cited by 93
“Here, we analyze the frame rate that could be achieved by our selfpowered sensor fitted with a state-of-art Bluetooth Low Energy (BLE) communication system [43].”
MethodWang, L., Zhang, D., Yan, Z., Xiong, H., & Xie, B. (2015) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2015.2418283 · Cited by 92
“With BLE, the battery drain of Bluetooth scanning is dramatically decreased [35].”
BackgroundInterference Suppression Using Deep Learning: Current Approaches and Open Challenges
Oyedare, T., Shah, V. K., Jakubisin, D. J., & Reed, J. H. (2022) · IEEE Access · doi:10.1109/access.2022.3185124 · Cited by 114
“For instance, Grimaldi et al. [152] observed that an online classifier, distinguishing between Bluetooth (also known as IEEE 802.15.1) and Bluetooth low energy (BLE) 13 technologies is ten times more likely to mis-classify when compared to offline methods which only mis-classified 2% of the time.”
BackgroundInfluentialEmpowering sustainability in the built environment: A technological Lens on industry 4.0 Enablers
Pachouri, V., Singh, R., Gehlot, A., Pandey, S., Akram, S. V., & Abbas, M. A. E. (2023) · Technology in Society · doi:10.1016/j.techsoc.2023.102427 · Cited by 98
Performance Analysis and Comparison of Bluetooth Low Energy with IEEE 802.15.4 and SimpliciTI
Mikhaylov, K., Plevritakis, N., & Tervonen, J. K. (2013) · Journal of Sensor and Actuator Networks · doi:10.3390/jsan2030589 · Cited by 94
“6 times lower than the theoretical results of our BLE maximum throughput measurements to , the reported in [17] 58.”
BackgroundMethodResultInfluentialMarques, G., Miranda, N., Bhoi, A. K., García-Zapirain, B., Hamrioui, S., & Díez, I. D. L. T. (2020) · Sensors · doi:10.3390/s20030720 · Cited by 96
“116] BLE uses the 2.4 GHz radio frequency band and consumes less power than ZigBee [117,118].”
BackgroundMethodInfluentialBeyond beaconing: Emerging applications and challenges of BLE
Yang, J., Poellabauer, C., Mitra, P., & Neubecker, C. (2019) · Ad Hoc Networks · doi:10.1016/j.adhoc.2019.102015 · Cited by 110
“The advertising process consumes very little energy and the theoretical life of a BLE beacon powered by a coin cell battery can be up to 14 years [25].”
BackgroundBluetooth Low Energy Mesh Networks: Survey of Communication and Security Protocols
Ghori, M. R., Wan, T., & Sodhy, G. C. (2020) · Sensors · doi:10.3390/s20123590 · Cited by 105
“The L2CAP profile provides connection-oriented and connectionless data services to the upper layer, along with multiplexing, segmentation, and reassembly capabilities [18].”
BackgroundWearable EBG-Backed Belt Antenna for Smart On-Body Applications
Pei, R., Leach, M. P., Lim, E. G., Wang, Z., Song, C., Wang, J., Zhang, W., Jiang, Z., & Huang, Y. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2983064 · Cited by 84
“, 1 mW) [30].”
Wi-Fi HaLow for the Internet of Things: An up-to-date survey on IEEE 802.11ah research
Tian, L., Santi, S., Seferagić, A., Lan, J., & Famaey, J. (2021) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2021.103036 · Cited by 107
Internet of Things: A Scientometric Review
Ruiz-Rosero, J., Ramírez-González, G., Williams, J. M., Liu, H., Khanna, R., & Pisharody, G. (2017) · Symmetry · doi:10.3390/sym9120301 · Cited by 106
“In this article, the authors describe the main features and potential applications for BLE technology [178].”
BackgroundEvaluating Bluetooth Low Energy Suitability for Time-Critical Industrial IoT Applications
Rondón, R., Gidlund, M., & Landernäs, K. (2017) · International Journal of Wireless Information Networks · doi:10.1007/s10776-017-0357-0 · Cited by 81
“This tendency is also seen in the results obtained by Gomez [21], and is also congruent with the previous mathematical formulation.”
ResultCommunication technologies and security challenges for internet of things: A comprehensive review
Bhoyar, P., Sahare, P., Dhok, S. B., & Deshmukh, R. B. (2018) · AEU - International Journal of Electronics and Communications · doi:10.1016/j.aeue.2018.11.031 · Cited by 91
Hasan, M. K., Shahjalal, M. A., Chowdhury, M. Z., & Jang, Y. M. (2019) · Sensors · doi:10.3390/s19051208 · Cited by 88
“0 by a special interest group in 2010, a tremendous research interest has been observed in the area of WBAN, not only for its low-power characteristics, but also for its simple protocol architecture [18].”
BackgroundBlueWallet: The Secure Bitcoin Wallet
Bamert, T., Decker, C., Wattenhofer, R. P., & Welten, S. (2014) · Lecture notes in computer science · doi:10.1007/978-3-319-11851-2_5 · Cited by 95
“[21].”
Opportunistic Sensor Data Collection with Bluetooth Low Energy
Aguilar, S., Vidal, R., & Gómez, C. (2017) · Sensors · doi:10.3390/s17010159 · Cited by 76
“This is expect d, as BLE implementations are not optimized for high t roug put [8,14].”
BackgroundMethodInfluentialXu, J., Bao, T., Lee, U. H., Kinnaird, C. R., Carender, W. J., Huang, Y., Sienko, K. H., & Shull, P. B. (2017) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/s12984-017-0313-3 · Cited by 91
“However, newer BLE modules may satisfy simultaneous multi-channel communication requirements and should thus be further explored.”
BackgroundInfluentialEnergy Modeling for the Bluetooth Low Energy Protocol
Kindt, P. H., Yunge, D., Diemer, R., & Chakraborty, S. (2020) · ACM Transactions on Embedded Computing Systems · doi:10.1145/3379339 · Cited by 76
An iBeacon-based Indoor Positioning Systems for Hospitals
Yang, J., Wang, Z., & Zhang, X. (2015) · International Journal of Smart Home · doi:10.14257/ijsh.2015.9.7.16 · Cited by 75
“This low power Bluetooth technology, compared with the traditional one, has advantages of lower cost and lower power consumption, as can be evidenced by an example that a button cell can allow low power Bluetooth devices to operate for up to a year to two years [10].”
BackgroundA survey on edge computing for wearable technology
Jin, X., Li, L., Dang, F., Chen, X., & Liu, Y. (2021) · Digital Signal Processing · doi:10.1016/j.dsp.2021.103146 · Cited by 89
“[75] demonstrated that a BLE device equipped with a coin cell battery can work for at most 14.”
Metadata
- Authors
- Gomez, C., Oller, J., & Paradells, J.
- Affiliations
- Universitat Politècnica de Catalunya/Fundació i2Cat, C/Esteve Terradas, 7, Castelldefels 08860, Spain
- i2CAT (ES)
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2012-08-29
- Volume
- 12
- Issue
- 9
- Pages
- 11734-11753
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC3478807
- OpenAlex
- W1971130353
- Cited by
- 967
- References
- 17
- Citations by year
- 2026: 34 · 2025: 51 · 2024: 48 · 2023: 42 · 2022: 47 · 2021: 68 · 2020: 100 · 2019: 105 · 2018: 128 · 2017: 120 · 2016: 108 · 2015: 68 · 2014: 34 · 2013: 13
- FWCI
- 48.24
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Wireless Body Area Networks
- Physical Sciences › Computer Science › Computer Networks and Communications › Energy Efficient Wireless Sensor Networks
- Keywords
- Bluetooth Low Energy, low-power wireless communication, energy consumption, throughput, battery life, coin cell batteries, bit error rate, sensor networks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.