CoChat

Wireless Power Transfer: Systems, Circuits, Standards, and Use Cases

Open access
Van Mulders, Jarne, Delabie, Daan, Lecluyse, Cédric, Buyle, Chesney, Callebaut, Gilles, Van der Perre, Liesbet, De Strycker, Lieven · 2022 · Sensors

The DOI matches its Crossref record; 144 of the 145 references it cites were found in a registry or an index, and 1 are not checked yet.

Abstract

Wireless power transfer provides a most convenient solution to charge devices remotely and without contacts. R&D has advanced the capabilities, variety, and maturity of solutions greatly in recent years. This survey provides a comprehensive overview of the state of the art on different technological concepts, including electromagnetic coupled and uncoupled systems and acoustic technologies. Solutions to transfer mW to MW of power, over distances ranging from millimeters to kilometers, and exploiting wave concepts from kHz to THz, are covered. It is an attractive charging option for many existing applications and moreover opens new opportunities. Various technologies are proposed to provide wireless power to these devices. The main challenges reside in the efficiency and range of the transfer. We highlight innovation in beamforming and UV-assisted approaches. Of particular interest for designers is the discussion of implementation and operational aspects, standards, and safety relating to regulations. A high-level catalog of potential applications maps these to adequate technological options for wireless power transfer.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/s22155573

Cites

144 of 145 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Categories of wireless power transfer systems, including section numbers.
Figure 1 Categories of wireless power transfer systems, including section numbers.CC BY · PubMed Central
Figure 2 Structure of a coupled wireless power transfer system.
Figure 2 Structure of a coupled wireless power transfer system.CC BY · PubMed Central
Figure 3 Transmitter example with pre-regulator and half-bridge inverter.
Figure 3 Transmitter example with pre-regulator and half-bridge inverter.CC BY · PubMed Central
Figure 4 Basic circuit of an inductively coupled WPT system.
Figure 4 Basic circuit of an inductively coupled WPT system.CC BY · PubMed Central
Figure 5 Canceling of the secondary leak inductance. The figure is composed of the equivalent model with a voltage-controlled secondary voltage source, with n being the inductance ratio [6].
Figure 5 Canceling of the secondary leak inductance. The figure is composed of the equivalent model with a voltage-controlled secondary voltage source, with n being the inductance ratio [6].CC BY · PubMed Central
Figure 6 The maximal efficiency for a series resonant compared to a non-resonant secondary circuit as a function of the coil quality factors and the coupling factor with a=amax [6].
Figure 6 The maximal efficiency for a series resonant compared to a non-resonant secondary circuit as a function of the coil quality factors and the coupling factor with a=amax [6].CC BY · PubMed Central
Figure 7 A series tuned primary and secondary LC-tank. The coupling factor kmrc in a magnetic resonance coupling system is typically lower than a coupling factor km in an IPT system.
Figure 7 A series tuned primary and secondary LC-tank. The coupling factor kmrc in a magnetic resonance coupling system is typically lower than a coupling factor km in an IPT system.CC BY · PubMed Central
Figure 8 MRC system with one receiver: equivalent scheme.
Figure 8 MRC system with one receiver: equivalent scheme.CC BY · PubMed Central
Figure 9 The transfer coefficient Π and efficiency η as function of kmrc(QTQR)^(1/2) [11].
Figure 9 The transfer coefficient Π and efficiency η as function of kmrc(QTQR)^(1/2) [11].CC BY · PubMed Central
Figure 10 Electrodynamically coupled WPT system with electromechanical receiver [13].
Figure 10 Electrodynamically coupled WPT system with electromechanical receiver [13].CC BY · PubMed Central
Figure 11 Basic circuit of a capacitive coupled WPT system.
Figure 11 Basic circuit of a capacitive coupled WPT system.CC BY · PubMed Central
Figure 12 Equivalent circuit models for the capacitive coupler. (a) Pi-model, (b) equivalent model with voltage controlled current sources with IM1=jωCMVC2 and IM2=jωCMVC1.
Figure 12 Equivalent circuit models for the capacitive coupler. (a) Pi-model, (b) equivalent model with voltage controlled current sources with IM1=jωCMVC2 and IM2=jωCMVC1.CC BY · PubMed Central
Figure 13 Equivalent scheme with VCCS model.
Figure 13 Equivalent scheme with VCCS model.CC BY · PubMed Central
Figure 14 CPT structures: (a) two-plate, (b) four-plate parallel, (c) four-plate stacked, and (d) six-plate structure.
Figure 14 CPT structures: (a) two-plate, (b) four-plate parallel, (c) four-plate stacked, and (d) six-plate structure.CC BY · PubMed Central
Figure 15 Circuit topologies for the realization of CPT systems. (a) General full-bridge inverter. (b) Modified PWM-based sepic converter. (c) Modified class-E converter.
Figure 15 Circuit topologies for the realization of CPT systems. (a) General full-bridge inverter. (b) Modified PWM-based sepic converter. (c) Modified class-E converter.CC BY · PubMed Central
Figure 16 Compensation circuit topologies for practical CPT. (a) L-compensation circuit. (b) LC-compensation circuit. (c) Multistage L-section compensation circuit.
Figure 16 Compensation circuit topologies for practical CPT. (a) L-compensation circuit. (b) LC-compensation circuit. (c) Multistage L-section compensation circuit.CC BY · PubMed Central
Figure 17 Schematic of an RFPT system. Antenna arrays (in dashed line) at the transmitter and/or receiver can be employed to increase the power transfer.
Figure 17 Schematic of an RFPT system. Antenna arrays (in dashed line) at the transmitter and/or receiver can be employed to increase the power transfer.CC BY · PubMed Central
Figure 18 Overview of the system concept, transmission, and efficiency model for RF power transfer.
Figure 18 Overview of the system concept, transmission, and efficiency model for RF power transfer.CC BY · PubMed Central
Figure 19 Three fields where the receiver can be located: reactive and radiating near field, radiating near, and far field. Distances depend on wavelength λ and antenna dimension D.
Figure 19 Three fields where the receiver can be located: reactive and radiating near field, radiating near, and far field. Distances depend on wavelength λ and antenna dimension D.CC BY · PubMed Central
Figure 20 Orientation and parameters of the transmit and receive antennas, based on [46].
Figure 20 Orientation and parameters of the transmit and receive antennas, based on [46].CC BY · PubMed Central
Figure 21 Transmitting and receiving antennas PLF visualization example (similar for linear wire antennas), based on [46].
Figure 21 Transmitting and receiving antennas PLF visualization example (similar for linear wire antennas), based on [46].CC BY · PubMed Central
Figure 22 Schematic diagram of an HILPB system [49].
Figure 22 Schematic diagram of an HILPB system [49].CC BY · PubMed Central
Figure 23 Efficiency of an LPT system.
Figure 23 Efficiency of an LPT system.CC BY · PubMed Central
Figure 24 Basic structure of an APT system.
Figure 24 Basic structure of an APT system.CC BY · PubMed Central
Figure 25 Example of magnetic resonance coupling with LC repeater.
Figure 25 Example of magnetic resonance coupling with LC repeater.CC BY · PubMed Central
Figure 26 Equivalent scheme of an MRC system with LC repeater.
Figure 26 Equivalent scheme of an MRC system with LC repeater.CC BY · PubMed Central
Figure 27 CPT system with one repeater.
Figure 27 CPT system with one repeater.CC BY · PubMed Central
Figure 28 AirFuel Resonance system representation with one PTU and multiple PRUs [110].
Figure 28 AirFuel Resonance system representation with one PTU and multiple PRUs [110].CC BY · PubMed Central
Figure 29 SAEJ2954 block diagram.
Figure 29 SAEJ2954 block diagram.CC BY · PubMed Central
Figure 30 Scope of the ARIB STD-T113 standard [120].
Figure 30 Scope of the ARIB STD-T113 standard [120].CC BY · PubMed Central
Figure 31 The near-field WattUp system consists of a Wattup-compatible transmitter and receiver. An optional BLE connection enables communication between both, for example, communicating the battery status information [124].
Figure 31 The near-field WattUp system consists of a Wattup-compatible transmitter and receiver. An optional BLE connection enables communication between both, for example, communicating the battery status information [124].CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 145 references

Research works printed but not linked: 4

  1. A. Balanis C. Antenna Theory: Analysis and Design 3rd ed. John Wiley and Sons, Inc. Hoboken, NJ, USA 2005 92 95
  2. Bernath P.F. Spectra of Atoms and Molecules Oxford University Press New York, NY, USA 1995
  3. IEEE C95.1-2019 IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz The Institute of Electrical and Electronics Engineers New York, NY, USA 2019
  4. Parliament E. Directive 2014/30/EU of the European Parliament and of the council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast) Official Journal of the European Union 29 March 2014

Cited by

See all 146

Metadata

Authors
Van Mulders, J., Delabie, D., Lecluyse, C., Buyle, C., Callebaut, G., Van der Perre, L., & De Strycker, L.
Affiliations
  • ESAT-DRAMCO, Ghent Technology Campus, KU Leuven, 9000 Ghent, Belgium
  • KU Leuven (BE)
Venue
Sensors
Publisher
MDPI AG
Published
2022-07-26
Volume
22
Issue
15
Pages
5573
ISSN
1424-8220 (ISSN-L)
OpenAlex
W4288069083
Cited by
141
References
141
Citations by year
2026: 31 · 2025: 33 · 2024: 48 · 2023: 28 · 2022: 1
FWCI
1.79
Type
journal article
Language
en
Open access
Locations
  • Sensors (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Lirias (KU Leuven) (submittedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • European Union’s Horizon 2020 research and innovation programme (101013425, G0D3819N)
  • Flemish Science Council FWO (101013425, G0D3819N)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
  • Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
Keywords
wireless power transfer, electromagnetic induction, electromagnetic resonance, acoustic energy transfer, wireless charging, beamforming, safety regulations, transfer efficiency
MeSH terms
Electromagnetic Phenomena, Wireless Technology

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.