The DOI matches its Crossref record; 152 of the 152 references it cites were found in a registry or an index.
From Corrective to Predictive Maintenance—A Review of Maintenance Approaches for the Power Industry
Open accessAbstract
Appropriate maintenance of industrial equipment keeps production systems in good health and ensures the stability of production processes. In specific production sectors, such as the electrical power industry, equipment failures are rare but may lead to high costs and substantial economic losses not only for the power plant but for consumers and the larger society. Therefore, the power production industry relies on a variety of approaches to maintenance tasks, ranging from traditional solutions and engineering know-how to smart, AI-based analytics to avoid potential downtimes. This review shows the evolution of maintenance approaches to support maintenance planning, equipment monitoring and supervision. We present older techniques traditionally used in maintenance tasks and those that rely on IT analytics to automate tasks and perform the inference process for failure detection. We analyze prognostics and health-management techniques in detail, including their requirements, advantages and limitations. The review focuses on the power-generation sector. However, some of the issues addressed are common to other industries. The article also presents concepts and solutions that utilize emerging technologies related to Industry 4.0, touching on prescriptive analysis, Big Data and the Internet of Things. The primary motivation and purpose of the article are to present the existing practices and classic methods used by engineers, as well as modern approaches drawing from Artificial Intelligence and the concept of Industry 4.0. The summary of existing practices and the state of the art in the area of predictive maintenance provides two benefits. On the one hand, it leads to improving processes by matching existing tools and methods. On the other hand, it shows researchers potential directions for further analysis and new developments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Regression Models and Life-Tables
Cox, D. R. (1972) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/j.2517-6161.1972.tb00899.x · Cited by 39,793
Digital Twin in manufacturing: A categorical literature review and classification
Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.474 · Cited by 3,612
The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles
Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1818 · Cited by 3,395
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
Support Vector Method for Function Approximation, Regression Estimation, and Signal Processing
Vapnik, V. N., Golowich, S. E., & Smola, A. J. (1997) · Cited by 2,757
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
Process fault detection based on modeling and estimation methods—A survey
Isermann, R. (1984) · Automatica · doi:10.1016/0005-1098(84)90098-0 · Cited by 2,364
An Overview on 3D Printing Technology: Technological, Materials, and Applications
Shahrubudin, N., Lee, T. C., & Ramlan, R. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.06.089 · Cited by 2,050
Remaining useful life estimation in prognostics using deep convolution neural networks
Li, X., Ding, Q., & Sun, J.-Q. (2018) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.11.021 · Cited by 1,755
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
Prof. RajratnaKharat*1, V. B. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493929 · Cited by 1,753
Lu, Y., Liu, C., Wang, K. I.-K., Huang, H., & Xu, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101837 · Cited by 1,624
Analytical redundancy and the design of robust failure detection systems
Chow, E., & Willsky, A. S. (1984) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1984.1103593 · Cited by 1,622
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
A systematic literature review of machine learning methods applied to predictive maintenance
Carvalho, T. P., Soares, F. A. A. M. N., Vita, R., Francisco, R. D. P., Basto, J. P., & Alcalá, S. G. S. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.106024 · Cited by 1,576
The industrial internet of things (IIoT): An analysis framework
Boyes, H., Hallaq, B., Cunningham, J., & Watson, T. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.04.015 · Cited by 1,486
Industry 4.0 technologies assessment: A sustainability perspective
Bai, C., Dallasega, P., Orzes, G., & Sarkis, J. (2020) · International Journal of Production Economics · doi:10.1016/j.ijpe.2020.107776 · Cited by 1,417
Fatemi, A., & Yang, L. (1998) · International Journal of Fatigue · doi:10.1016/s0142-1123(97)00081-9 · Cited by 1,308
Predictive maintenance in the Industry 4.0: A systematic literature review
Zonta, T., da Costa, C. A., da Rosa Righi, R., de Lima, M. J., da Trindade, E. S., & Li, G. P. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2020.106889 · Cited by 1,302
Convolutional Neural Network Based Fault Detection for Rotating Machinery
Janssens, O., Slavkovikj, V., Vervisch, B., Stockman, K., Loccufier, M., Verstockt, S., Van de Walle, R., & Van Hoecke, S. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.05.027 · Cited by 1,255
An Overview on Edge Computing Research
Cao, K., Liu, Y., Meng, G., & Sun, Q. (2020) · IEEE Access · doi:10.1109/access.2020.2991734 · Cited by 1,254
Peng, Z. K., & Chu, F. L. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00075-x · Cited by 1,192
Edge Intelligence: The Confluence of Edge Computing and Artificial Intelligence
Deng, S., Zhao, H., Fang, W., Yin, J., Dustdar, S., & Zomaya, A. Y. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.2984887 · Cited by 1,147
The Exponentially Weighted Moving Average
Hunter, J. S. (1986) · Journal of Quality Technology · doi:10.1080/00224065.1986.11979014 · Cited by 1,136
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119
Scanning the Industry 4.0: A Literature Review on Technologies for Manufacturing Systems
Alcácer, V., & Cruz-Machado, V. (2019) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2019.01.006 · Cited by 1,063
Expert system methodologies and applications—a decade review from 1995 to 2004
Liao, S.-H. (2005) · Expert Systems with Applications · doi:10.1016/j.eswa.2004.08.003 · Cited by 1,057
Deep Convolutional Neural Network Based Regression Approach for Estimation of Remaining Useful Life
Sateesh Babu, G., Zhao, P., & Li, X.-L. (2016) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-32025-0_14 · Cited by 962
Prognostic modelling options for remaining useful life estimation by industry
Sikorska, J. Z., Hodkiewicz, M., & Ma, L. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.11.018 · Cited by 947
Machine Learning in Predictive Maintenance towards Sustainable Smart Manufacturing in Industry 4.0
Çınar, Z. M., Abdussalam Nuhu, A., Zeeshan, Q., Korhan, O., Asmael, M., & Safaei, B. (2020) · Sustainability · doi:10.3390/su12198211 · Cited by 834
Rfid Technologies: Supply-Chain Applications and Implementation Issues
Angeles, R. (2005) · Information Systems Management · doi:10.1201/1078/44912.22.1.20051201/85739.7 · Cited by 818
Overview on Bayesian networks applications for dependability, risk analysis and maintenance areas
Weber, P., Medina-Oliva, G., Simon, C., & Iung, B. (2012) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2010.06.002 · Cited by 765
Time–frequency feature representation using energy concentration: An overview of recent advances
Sejdić, E., Djurović, I., & Jiang, J. (2009) · Digital Signal Processing · doi:10.1016/j.dsp.2007.12.004 · Cited by 756
3D printing – A review of processes, materials and applications in industry 4.0
Jandyal, A., Chaturvedi, I., Wazir, I., Raina, A., & Ul Haq, M. I. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2021.09.004 · Cited by 739
Data-Driven Methods for Predictive Maintenance of Industrial Equipment: A Survey
Zhang, W., Yang, D., & Wang, H. (2019) · IEEE Systems Journal · doi:10.1109/jsyst.2019.2905565 · Cited by 732
Diez-Olivan, A., Del Ser, J., Galar, D., & Sierra, B. (2019) · Information Fusion · doi:10.1016/j.inffus.2018.10.005 · Cited by 633
Fault diagnosis of machines via parameter estimation and knowledge processing—Tutorial paper
Isermann, R. (1993) · Automatica · doi:10.1016/0005-1098(93)90088-b · Cited by 598
Substantial capabilities of robotics in enhancing industry 4.0 implementation
Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2021) · Cognitive Robotics · doi:10.1016/j.cogr.2021.06.001 · Cited by 563
Huang, R., Xi, L., Li, X., Liu, C., Qiu, H., & Lee, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.11.008 · Cited by 523
Industrial Internet of Things and its Applications in Industry 4.0: State of The Art
Malik, P. K., Sharma, R., Singh, R., Gehlot, A., Satapathy, S. C., Alnumay, W. S., Pelusi, D., Ghosh, U., & Nayak, J. (2021) · Computer Communications · doi:10.1016/j.comcom.2020.11.016 · Cited by 523
Vibration and current monitoring for detecting airgap eccentricity in large induction motors
Cameron, J. R., Thomson, W. T., & Dow, A. B. (1986) · IEE Proceedings B Electric Power Applications · doi:10.1049/ip-b.1986.0022 · Cited by 512
A similarity-based prognostics approach for Remaining Useful Life estimation of engineered systems
Wang, T., Yu, J., Siegel, D., & Lee, J. (2008) · 2008 International Conference on Prognostics and Health Management · doi:10.1109/phm.2008.4711421 · Cited by 474
The detection of inter-turn short circuits in the stator windings of operating motors
Joksimovic, G. M., & Penman, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873216 · Cited by 471
The use of Digital Twin for predictive maintenance in manufacturing
Aivaliotis, P., Georgoulias, K., & Chryssolouris, G. (2019) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2019.1686173 · Cited by 437
Tang, Z., Chen, Z., Bao, Y., & Li, H. (2019) · Structural Control and Health Monitoring · doi:10.1002/stc.2296 · Cited by 436
Failure Modes and Effects Analysis (FMEA) for wind turbines
Arabian-Hoseynabadi, H., Oraee, H., & Tavner, P. J. (2010) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2010.01.019 · Cited by 426
Maintenance, Replacement, and Reliability: Theory and Applications, Second Edition
Jardine, A. K. S., & Tsang, A. H. C. (2013) · CRC Press eBooks · doi:10.1201/b14937 · Cited by 419
Xiang, L., Wang, P., Yang, X., Hu, A., & Su, H. (2021) · Measurement · doi:10.1016/j.measurement.2021.109094 · Cited by 406
Health assessment and life prediction of cutting tools based on support vector regression
Benkedjouh, T., Medjaher, K., Zerhouni, N., & Rechak, S. (2015) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-013-0774-6 · Cited by 386
Tian, Z. (2009) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-009-0356-9 · Cited by 376
Predictive Maintenance Techniques
Mobley, R. K. (2002) · An Introduction to Predictive Maintenance · doi:10.1016/b978-075067531-4/50006-3 · Cited by 373
Schlechtingen, M., & Santos, I. F. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.12.007 · Cited by 370
A Data-Driven Failure Prognostics Method Based on Mixture of Gaussians Hidden Markov Models
Tobon-Mejia, D. A., Medjaher, K., Zerhouni, N., & Tripot, G. (2012) · IEEE Transactions on Reliability · doi:10.1109/tr.2012.2194177 · Cited by 363
Sahal, R., Breslin, J. G., & Ali, M. I. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.11.004 · Cited by 356
Remaining useful life estimation based on nonlinear feature reduction and support vector regression
Benkedjouh, T., Medjaher, K., Zerhouni, N., & Rechak, S. (2013) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2013.02.006 · Cited by 353
Integrated and Intelligent Manufacturing: Perspectives and Enablers
Chen, Y. (2017) · Engineering · doi:10.1016/j.eng.2017.04.009 · Cited by 353
A Systematic Literature Review on Cloud Computing Security: Threats and Mitigation Strategies
Alouffi, B., Hasnain, M., Alharbi, A., Alosaimi, W., Alyami, H., & Ayaz, M. (2021) · IEEE Access · doi:10.1109/access.2021.3073203 · Cited by 351
Simulation in industry 4.0: A state-of-the-art review
de Paula Ferreira, W., Armellini, F., & De Santa-Eulalia, L. A. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2020.106868 · Cited by 333
Mosallam, A., Medjaher, K., & Zerhouni, N. (2016) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0933-4 · Cited by 328
The extended Kalman filter as an exponential observer for nonlinear systems
Reif, K., & Unbehauen, R. (1999) · IEEE Transactions on Signal Processing · doi:10.1109/78.774779 · Cited by 318
Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2019) · IEEE Access · doi:10.1109/access.2019.2938227 · Cited by 312
A Review of Parity Space Approaches to Fault Diagnosis
Patton, R. J., & Chen, J. (1991) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)51124-6 · Cited by 310
Jordehi, A. R. (2017) · Solar Energy · doi:10.1016/j.solener.2017.10.063 · Cited by 299
Corallo, A., Lazoi, M., & Lezzi, M. (2020) · Computers in Industry · doi:10.1016/j.compind.2019.103165 · Cited by 298
Bayesian Networks-Based Approach for Power Systems Fault Diagnosis
Yongli, Z., Limin, H., & Jinling, L. (2006) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2005.858774 · Cited by 264
Big data issues in smart grid – A review
Tu, C., He, X., Shuai, Z., & Jiang, F. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.134 · Cited by 256
Internet of Things (IoT) Cybersecurity: Literature Review and IoT Cyber Risk Management
Lee, I. (2020) · Future Internet · doi:10.3390/fi12090157 · Cited by 256
Unsupervised electric motor fault detection by using deep autoencoders
Principi, E., Rossetti, D., Squartini, S., & Piazza, F. (2019) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2019.1911393 · Cited by 248
Stacked Sparse Autoencoder-Based Deep Network for Fault Diagnosis of Rotating Machinery
Qi, Y., Shen, C., Wang, D., Shi, J., Jiang, X., & Zhu, Z. (2017) · IEEE Access · doi:10.1109/access.2017.2728010 · Cited by 236
Huang, C.-G., Huang, H.-Z., Li, Y.-F., & Peng, W. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.03.012 · Cited by 230
A review of edge computing reference architectures and a new global edge proposal
Sittón-Candanedo, I., Alonso, R. S., Corchado, J. M., Rodríguez-González, S., & Casado-Vara, R. (2019) · Future Generation Computer Systems · doi:10.1016/j.future.2019.04.016 · Cited by 224
An SVM-Based Solution for Fault Detection in Wind Turbines
Santos, P., Villa, L., Reñones, A., Bustillo, A., & Maudes, J. (2015) · Sensors · doi:10.3390/s150305627 · Cited by 223
Bearing degradation process prediction based on the PCA and optimized LS-SVM model
Dong, S., & Luo, T. (2013) · Measurement · doi:10.1016/j.measurement.2013.06.038 · Cited by 218
Fischer, K., Besnard, F., & Bertling, L. (2012) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2011.2176129 · Cited by 217
ARVIKA-augmented reality for development, production and service
Friedrich, W. (2003) · Proceedings. International Symposium on Mixed and Augmented Reality · doi:10.1109/ismar.2002.1115059 · Cited by 208
Genetic Algorithm Based Demand Side Management for Smart Grid
Bharathi, C., Rekha, D., & Vijayakumar, V. (2017) · Wireless Personal Communications · doi:10.1007/s11277-017-3959-z · Cited by 199
Marano, V., Rizzo, G., & Tiano, F. A. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.12.086 · Cited by 197
Bearing Fault Diagnosis for Direct-Drive Wind Turbines via Current-Demodulated Signals
Gong, X., & Qiao, W. (2013) · Industrial Electronics, IEEE Transactions on · doi:10.1109/tie.2013.2238871 · Cited by 195
Knowledge-based expert system in manufacturing planning: state-of-the-art review
Kumar, S. P. L. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1424372 · Cited by 195
Guo, Z. X., Ngai, E. W. T., Yang, C., & Liang, X. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2014.09.004 · Cited by 194
Fault Detection and Diagnosis Using Combined Autoencoder and Long Short-Term Memory Network
Park, P., Marco, P. D., Shin, H., & Bang, J. (2019) · Sensors · doi:10.3390/s19214612 · Cited by 186
Orchestration in Fog Computing: A Comprehensive Survey
Costa, B., Bachiega, J., de Carvalho, L. R., & Araujo, A. P. F. (2023) · ACM Computing Surveys · doi:10.1145/3486221 · Cited by 185
An extension to Fuzzy Fault Tree Analysis (FFTA) application in petrochemical process industry
Lavasani, S. M., Zendegani, A., & Celik, M. (2015) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2014.05.001 · Cited by 183
A time domain approach to diagnose gearbox fault based on measured vibration signals
Hong, L., & Dhupia, J. S. (2014) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2013.11.033 · Cited by 183
Intelligent condition-based prediction of machinery reliability
Heng, A., Tan, A. C. C., Mathew, J., Montgomery, N., Banjevic, D., & Jardine, A. K. S. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.12.006 · Cited by 173
An Augmented Reality inspection tool to support workers in Industry 4.0 environments
Marino, E., Barbieri, L., Colacino, B., Fleri, A. K., & Bruno, F. (2021) · Computers in Industry · doi:10.1016/j.compind.2021.103412 · Cited by 170
Power System Stability Control for a Wind Farm Based on Adaptive Dynamic Programming
Tang, Y., He, H., Wen, J., & Liu, J. (2015) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2346740 · Cited by 168
Current monitoring for detecting inter-turn short circuits in induction motors
Stavrou, A., Sedding, H. G., & Penman, J. (2001) · IEEE Transactions on Energy Conversion · doi:10.1109/60.911400 · Cited by 168
Using SVM based method for equipment fault detection in a thermal power plant
Chen, K.-Y., Chen, L.-S., Chen, M.-C., & Lee, C.-L. (2011) · Computers in Industry · doi:10.1016/j.compind.2010.05.013 · Cited by 164
Magargle, R. S., Johnson, L., Mandloi, P., Davoudabadi, P., Kesarkar, O., Krishnaswamy, S., Batteh, J. J., & Pitchaikani, A. (2017) · Linköping electronic conference proceedings · doi:10.3384/ecp1713235 · Cited by 162
Huang, H.-Z., Wang, H.-K., Li, Y., Zhang, L., & Liu, Z. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-014-1222-z · Cited by 159
On Enabling Sustainable Edge Computing with Renewable Energy Resources
Li, W., Yang, T., Delicato, F. C., Pires, P. F., Tari, Z., Khan, S. U., & Zomaya, A. Y. (2018) · IEEE Communications Magazine · doi:10.1109/mcom.2018.1700888 · Cited by 153
Data-driven failure mode and effect analysis (FMEA) to enhance maintenance planning
Filz, M.-A., Langner, J. E. B., Herrmann, C. A., & Thiede, S. (2021) · Computers in Industry · doi:10.1016/j.compind.2021.103451 · Cited by 153
Do, V. T., & Chong, U. (2011) · Strojniški vestnik – Journal of Mechanical Engineering · doi:10.5545/sv-jme.2010.162 · Cited by 151
A syntactic pattern-recognition approach for process monitoring and fault diagnosis
Rengaswamy, R., & Venkatasubramanian, V. (1995) · Engineering Applications of Artificial Intelligence · doi:10.1016/0952-1976(94)00058-u · Cited by 150
Machine health prognostics using survival probability and support vector machine
Widodo, A., & Yang, B. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.01.038 · Cited by 147
O’Donovan, P., Gallagher, C., Leahy, K., & O’Sullivan, D. T. J. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.04.016 · Cited by 140
Olesen, J. F., & Shaker, H. R. (2020) · Sensors · doi:10.3390/s20082425 · Cited by 139
Residual Error Based Anomaly Detection Using Auto-Encoder in SMD Machine Sound
Oh, D. Y., & Yun, I. D. (2018) · Sensors · doi:10.3390/s18051308 · Cited by 132
Prognostic study of ball screws by ensemble data-driven particle filters
Deng, Y., Du, S., Jia, S., Chen, Z., & Xie, Z. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.06.009 · Cited by 130
Yazdi, M., Korhan, O., & Daneshvar, S. (2018) · International Journal of Occupational Safety and Ergonomics · doi:10.1080/10803548.2018.1454636 · Cited by 128
Real-time optimization using reinforcement learning
Powell, K. M., Machalek, D., & Quah, T. (2020) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2020.107077 · Cited by 125
Study on the Security Models and Strategies of Cloud Computing
Che, J., Duan, Y., Zhang, T., & Fan, J. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.11.2551 · Cited by 119
Deep Reinforcement Learning for Real-Time Optimization of Pumps in Water Distribution Systems
Hajgató, G., Paál, G., & Gyires-Tóth, B. (2020) · Journal of Water Resources Planning and Management · doi:10.1061/(asce)wr.1943-5452.0001287 · Cited by 119
Feature Evaluation for Effective Bearing Prognostics
Camci, F., Medjaher, K., Noureddine Zerhouni, A., & Nectoux, P. (2012) · Quality and Reliability Engineering International · doi:10.1002/qre.1396 · Cited by 115
Lu, C., Lyu, J., Zhang, L., Gong, A., Fan, Y., Yan, J., & Li, X. (2020) · IEEE Access · doi:10.1109/access.2020.3032529 · Cited by 112
A qualitative shape analysis formalism for monitoring control loop performance
Rengaswamy, R., Hägglund, T. J., & Venkatasubramanian, V. (2001) · Engineering Applications of Artificial Intelligence · doi:10.1016/s0952-1976(00)00051-8 · Cited by 109
Digital Twin-Driven Decision Making and Planning for Energy Consumption
Fathy, Y., Jaber, M., & Nadeem, Z. (2021) · Journal of Sensor and Actuator Networks · doi:10.3390/jsan10020037 · Cited by 108
Cho, H. C., Knowles, J., Fadali, M. S., & Lee, K. S. (2009) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2009.2020863 · Cited by 103
Nuclear power plant components condition monitoring by probabilistic support vector machine
Liu, J., Seraoui, R., Vitelli, V., & Zio, E. (2013) · Annals of Nuclear Energy · doi:10.1016/j.anucene.2013.01.005 · Cited by 100
Generating parity relations for detecting and identifying control system component failures
Massoumnia, M.-A., & Velde, W. E. V. (1988) · Journal of Guidance Control and Dynamics · doi:10.2514/3.20270 · Cited by 96
Lorenz, M., Knopp, S., & Klimant, P. (2018) · IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct) · doi:10.1109/ismar-adjunct.2018.00055 · Cited by 91
Assessment of gas and dust explosion in coal mines by means of fuzzy fault tree analysis
Shi, S., Jiang, B., & Meng, X. (2018) · International Journal of Mining Science and Technology · doi:10.1016/j.ijmst.2018.07.007 · Cited by 88
Smart Education in the context of Industry 4.0
Assante, D., Caforio, A., Flamini, M., & Romano, E. (2019) · IEEE Global Engineering Education Conference (EDUCON) · doi:10.1109/educon.2019.8725057 · Cited by 80
Survey on Models and Techniques for Root-Cause Analysis
Solé, M., Muntés-Mulero, V., Rana, A. I., & Estrada, G. (2017) · arXiv · doi:10.48550/arxiv.1701.08546 · Cited by 74
An effective security measures for nuclear power plant using big data analysis approach
Lee, S., & Huh, J. (2018) · The Journal of Supercomputing · doi:10.1007/s11227-018-2440-4 · Cited by 71
Building an Expert Recommender Chatbot
Cerezo, J., Kubelka, J., Robbes, R., & Bergel, A. (2019) · IEEE/ACM International Workshop on Bots in Software Engineering (BotSE) · doi:10.1109/botse.2019.00022 · Cited by 71
Support vector machines for survival analysis
Belle, V. V., Kristiaan Pelckmans, A., Suykens, J. A. K., & Huffel, S. V. (2007) · Computational intelligence · Cited by 65
Observer and Data-Driven-Model-Based Fault Detection in Power Plant Coal Mills
Odgaard, P. F., Lin, B., & Jørgensen, S. B. (2008) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2007.914185 · Cited by 58
Structured Denoising Autoencoder for Fault Detection and Analysis
Tagawa, T., Tadokoro, Y., & Yairi, T. (2014) · Asian Conference on Machine Learning · Cited by 55
Feng, K., Wang, K., Zhang, M., Ni, Q., & Zuo, M. J. (2016) · Measurement Science and Technology · doi:10.1088/1361-6501/aa543e · Cited by 55
A System Engineering Approach Using FMEA and Bayesian Network for Risk Analysis—A Case Study
Rastayesh, S., Bahrebar, S., Blaabjerg, F., Zhou, D., Wang, H., & Sørensen, J. D. (2019) · Sustainability · doi:10.3390/su12010077 · Cited by 55
Gül, Ö. M., Kulhandjian, M., Kantarcı, B., Touazi, A., Ellement, C., & D’Amours, C. (2023) · IEEE Access · doi:10.1109/access.2023.3257266 · Cited by 53
Merkt, O. (2019) · Annals of Computer Science and Information Systems · doi:10.15439/2019f101 · Cited by 50
Dynamic Operator Instructions Based on Augmented Reality and Rule-based Expert Systems
Syberfeldt, A., Danielsson, O., Holm, M., & Wang, L. (2016) · Procedia CIRP · doi:10.1016/j.procir.2015.12.113 · Cited by 49
An approach to fault diagnosis of helicopter planetary gears
Saxena, A. (2005) · IEEE AUTOTESTCON (IEEE Systems Readiness Technology Conference) · doi:10.1109/autest.2004.1436936 · Cited by 49
Psychoacoustic approach for cavitation detection in centrifugal pumps
Murovec, J., Čurović, L., Novaković, T., et al. (2020) · Applied Acoustics · doi:10.1016/j.apacoust.2020.107323 · Cited by 49
Power plant maintenance scheduling using ant colony optimization: an improved formulation
Foong, W. K., Maier, H. R., & Simpson, A. R. (2008) · Engineering Optimization · doi:10.1080/03052150701775953 · Cited by 42
Enabling Industrial Internet of Things (IIoT) towards an emerging smart energy system
Zhang, D., Chan, C. C., & Zhou, G. Y. (2018) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.14171/j.2096-5117.gei.2018.01.005 · Cited by 40
Kwak, R.-Y., TAKAKUSAGI, A., Sohn, J.-Y., Fujii, S., & Byung-Yoon, P. (2004) · Building and Environment · doi:10.1016/j.buildenv.2004.01.029 · Cited by 34
Computational Science – ICCS 2020
Krzhizhanovskaya, V. V., Závodszky, G., Lees, M., Dongarra, J. J., Sloot, P. M. A., Brissos, S., Teixeira, J., Krzhizhanovskaya, V. V., Závodszky, G., Lees, M., et al. (2020) · Lecture notes in computer science · doi:10.1007/978-3-030-50436-6 · Cited by 31
Jain, P., Li, J., Poon, J., Spanos, C. J., Sanders, S. R., Xu, J., & Panda, S. K. (2017) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2017.8216866 · Cited by 30
Computational Science – ICCS 2021
Paszyński, M. R., Kranzlmüller, D. A., Krzhizhanovskaya, V. V., Dongarra, J. J., & Sloot, P. M. A. (2021) · Lecture notes in computer science · doi:10.1007/978-3-030-77964-1 · Cited by 29
The Application of Nonstandard Support Vector Machine in Tool Condition Monitoring System
Sun, J., Hong, G. S., Rahman, M., & Wong, Y. S. (2005) · IEEE International Workshop on Electronic Design, Test and Applications (DELTA) · doi:10.1109/delta.2004.10017 · Cited by 27
Maintenance Framework for Repairing Partially Damaged Parts Using 3D Printing
Kim, H., Cha, M., Kim, B. C., Lee, I., & Mun, D. (2019) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-019-00132-x · Cited by 27
Health condition prognostics of gears using a recurrent neural network approach
Tian, Z., & Zuo, M. J. (2009) · Annual Reliability and Maintainability Symposium (RAMS) · doi:10.1109/rams.2009.4914720 · Cited by 25
Remaining useful life estimation of ball bearings by means of monotonic score calibration
Carino, J. A., Zurita, D., Delgado-Prieto, M., Ortega, J. A., & Romero-Troncoso, R. D. J. (2015) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2015.7125351 · Cited by 24
Zilvan, V., Ramdan, A., Suryawati, E., Kusumo, R. B. S., Krisnandi, D., & Pardede, H. F. (2019) · International Conference on Informatics and Computational Sciences (ICICoS) · doi:10.1109/icicos48119.2019.8982494 · Cited by 23
Assessment of Gearbox Fault DetectionUsing Vibration Signal Analysis and Acoustic Emission Technique
Saxena, V. (2013) · IOSR Journal of Mechanical and Civil Engineering · doi:10.9790/1684-0745260 · Cited by 22
Fuzzy Join for Flexible Combining Big Data Lakes in Cyber-Physical Systems
Mrozek, D., Lipinska, A., & Mrozek, D. (2018) · IEEE Access · doi:10.1109/access.2018.2879829 · Cited by 22
Self-citationKim, H., Cha, M., Kim, B. C., Kim, T., & Mun, D. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2018-0139 · Cited by 22
Managing big data in coal-fired power plants: a business intelligence framework
Chongwatpol, J. (2016) · Industrial Management & Data Systems · doi:10.1108/imds-11-2015-0473 · Cited by 21
PHM Survey : Implementation of Signal Processing Methods for Monitoring Bearings and Gearboxes
Soualhi, A., Hawwari, Y., Medjaher, K., Clerc, G., Razik, H., & Guillet, F. (2020) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2018.v9i2.2736 · Cited by 21
Use of Paris Law for Prediction of Component Remaining Life
Bechhoefer, E. R., Bernhard, A., & He, D. (2008) · Proceedings - IEEE Aerospace Conference · doi:10.1109/aero.2008.4526611 · Cited by 20
A Hopping Umbrella for Fuzzy Joining Data Streams From IoT Devices in the Cloud and on the Edge
Mrozek, D., Tokarz, K., Pankowski, D., & Mrozek, D. (2019) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2019.2955056 · Cited by 18
Self-citationQualitative path estimation: A fast and reliable algorithm for qualitative trend analysis
Villez, K. (2015) · AIChE Journal · doi:10.1002/aic.14736 · Cited by 17
Antomarioni, S., Bellinello, M. M., Bevilacqua, M., Ciarapica, F. E., da Silva, R. F., & de Souza, G. F. M. (2020) · Energies · doi:10.3390/en13236400 · Cited by 13
A new approach for computer-aided fault tree generation
Majdara, A., & Wakabayashi, T. (2009) · IEEE International Systems Conference (SysCon) · doi:10.1109/systems.2009.4815817 · Cited by 11
PHM Survey : Implementation of Diagnostic Methods for Monitoring Industrial Systems
Soualhi, A., Yousfi, B. E., Hawwari, Y., Medjaher, K., Clerc, G., Razik, H., & Guillet, F. (2019) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2019.v10i2.2733 · Cited by 8
Assessment of Rotor Degradation in Steam Turbine Using Support Vector Machine
Yan, J., Ma, H., Wan-zhao, L., & Zhu, H. (2009) · Asia-Pacific Power and Energy Engineering Conference (APPEEC) · doi:10.1109/appeec.2009.4918199 · Cited by 7
Ontology for computer-aided fault tree synthesis
Venceslau, A., Lima, R. D. B. F., Guedes, L. A., & da Silva, I. M. D. (2014) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2014.7005334 · Cited by 6
Digital model of a gas turbine performance prediction and preventive maintenance
Cappanera, P., Manfrida, G., Nicoletti, A., Pacini, L., Romagnoli, S., & Rossi, R. (2019) · AIP conference proceedings · doi:10.1063/1.5138766 · Cited by 4
Cited by
Optimizing renewable energy systems through artificial intelligence: Review and future prospects
Ukoba, K., Olatunji, K. O., Adeoye, E., Jen, T.-C., & Madyira, D. M. (2024) · Energy & Environment · doi:10.1177/0958305x241256293 · Cited by 547
Metadata
- Authors
- Molęda, M., Małysiak-Mrozek, B., Ding, W., Sunderam, V., & Mrozek, D.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2023-06-27
- Volume
- 23
- Issue
- 13
- Pages
- 5970
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W4382402849
- Cited by
- 288
- References
- 152
- FWCI
- 49.84
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.