Physico-Mechanical and Thermodynamic Properties of Mycelium-Based Biocomposites: A Review
Open accessThe DOI matches its Crossref record; 79 of the 81 references it cites were found in a registry or an index.
Abstract
Reducing the use of non-renewable resources is a key strategy of a circular economy. Mycelium-based foams and sandwich composites are an emerging category of biocomposites relying on the valorization of lignocellulosic wastes and the natural growth of the living fungal organism. While growing, the fungus cements the substrate, which is partially replaced by the tenacious biomass of the fungus itself. The final product can be shaped to produce insulating panels, packaging materials, bricks or new-design objects. Only a few pioneer companies in the world retain a significant know-how, as well as the ability to provide the material characterization. Moreover, several technical details are not revealed due to industrial secrecy. According to the available literature, mycelium-based biocomposites show low density and good insulation properties, both related to acoustic and thermal aspects. Mechanical properties are apparently inferior in comparison to expanded polystyrene (EPS), which is the major synthetic competitor. Nevertheless, mycelium-based composites can display an enormous variability on the basis of: fungal species and strain; substrate composition and structure; and incubation conditions. The aim of the present review is to summarize technical aspects and properties of mycelium-based biocomposites focusing on both actual applications and future perspectives.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 μ m ( H ), 50 μ m ( C , G , K ), 20 μ m ( L ) and 10 μ m ( D ). Reprinted with permission of Apples et al. (2019) [18]. Figure 2. Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 µ m( H ), 50 µ m( C , G , K ), 20 µ m( L ) and 10 µ m( D ). Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/39c84f99e68d4fcaad666827f0ef34d9/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-2.png)
![Figure 3 Diagram showing the production and life cycle of mycelium-based materials. The picture also shows how these materials comply with circular thinking. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].](https://figures.cochat.ai/paper-figures/ed081962da034a53970821618a99adac/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-3.png)
![Figure 4 Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36] . Figure 4. Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36]. Sustainability 2019 , 11 , x FOR PEER REVIEW 6 of 23](https://figures.cochat.ai/paper-figures/7bbd01c3766e4b769bd36b37bcc0dafa/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-4.png)
![Figure 5 Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22]. Figure 5. Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22].](https://figures.cochat.ai/paper-figures/9b2214683ec448b7abf4ab02fe062b6d/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-5.png)
![Figure 6 Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18]. Figure 6. Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/3c96dc8d66814fe48890af52edb92b6d/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-6.png)
![Figure 7 Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31]. Figure 7. Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].](https://figures.cochat.ai/paper-figures/9adbf69f22cb4e4199713ee10c10482a/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-7.png)
![Figure 8 Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. Figure 8. Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/925c988d6c51419fa5ee3fe2d0733743/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-8.png)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“They can be produced into various shapes, which make them an ideal candidate not only for construction but also packaging materials (Girometta et al., 2019).”
From Packaging design for the circular economy: A systematic review (2022) · cites this paper as Girometta et al., 2019
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Chitin and chitosan polymers: Chemistry, solubility and fiber formation
Pillai, C. K. S., Paul, W., & Sharma, C. P. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.001 · Cited by 2,745 · cited 2×
“is, 100% acetylation is not expected in fibrils regarded as chitin [58,59].”
BackgroundAinsworth and Bisbys Dictionary of the Fungi
(2008) · CABI eBooks · doi:10.1079/9780851998268.0000 · Cited by 2,202
Chitosan-based biomaterials for tissue engineering
Croisier, F., & Jérôme, C. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.009 · Cited by 2,149 · cited 1×
“All told, chitosan seems to be more versatile than chitin for industrial and bioengineering applications; basically, it represents the most important chitin derivative, much easier to obtain and to couple with other molecules as amorphous [60,61].”
BackgroundISO (International Organization for Standardization)
Nollet, L. M. L. (2019) · Testing and Analysis of GMO-containing Foods and Feed · doi:10.1201/9781315178592-10 · Cited by 1,895
Production of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687 · cited 1×
“Moreover, the term “fibre” has different meaning in chemistry, materials engineering and botany [2-5].”
BackgroundThe structure and synthesis of the fungal cell wall
Bowman, S. M., & Free, S. J. (2006) · BioEssays · doi:10.1002/bies.20441 · Cited by 1,317 · cited 1×
“Aside from H-bonds, chitin has been reported to be covalently bonded to polysaccharides and thus to peptides [56,57].”
BackgroundOccurrence, Toxicity, and Analysis of Major Mycotoxins in Food
Alshannaq, A., & Yu, J.-H. (2017) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph14060632 · Cited by 1,265 · cited 1×
“According to the BAT, edible and/or medicinal macro-species usually are adopted due to their morphological features and cultivability; notably, they are far from being related to the production of mycotoxins or toxic volatile/soluble metabolites [99,100].”
BackgroundInsulation materials for the building sector: A review and comparative analysis
Schiavoni, S., D׳Alessandro, F., Bianchi, F., & Asdrubali, F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.045 · Cited by 993 · cited 1×
“MBFs, by relying on the BAT, already can be regarded as competitive towards unconventional insulation materials, although a decrease of about 33% in thermal conductivity is required to be fully competitive with commercial materials [50,54].”
BackgroundA review of unconventional sustainable building insulation materials
Asdrubali, F., D'Alessandro, F., & Schiavoni, S. (2015) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2015.05.002 · Cited by 952 · cited 1×
“MBFs, by relying on the BAT, already can be regarded as competitive towards unconventional insulation materials, although a decrease of about 33% in thermal conductivity is required to be fully competitive with commercial materials [50,54].”
Background
Research works printed but not linked: 11
- Sitte, P.; Weiler, E.; Kadereit, H.J.; Bresinsky, A.; Körner, C. Strasburger, Lehrbuch der Botanik für Hochschulen, 35th ed.; Springer: Berlin/Heidelberg, Germany, 2002; ISBN 3-8274-1010-X.
- Callister, W.M.; Rethwisch, D.G. Materials Science and Engineering, 8th ed.; John Wiley & Sons: New York, NY, USA, 2007; ISBN 978-0470419977.
- Schwarze, F.W.M.R.; Engels, J.; Mattheck, C. Fungal Strategies of Wood Decay in Trees; Springer-Verlag: Berlin, Germany, 2013; p. 185, ISBN 3 540 67205 2.
- Drzal, L.T.; Mohanty, A.K.; Misra, M. Bio-composite materials as alternatives to petroleum-based composites for automotive applications. Magnesium 2001, 40, 1-3.
- Travaglini, S.; Noble, J.; Ross, P.G.; Dharan, C.K.H. Mycology matrix composites. In Proceedings of the American Society for Composites, 28th Technical Conference, State College, PA, USA, 9-11 September 2013.
- Santhosh, B.S.; Bhavana, D.R.; Rakesh, M.G. Mycelium composites: An emerging green building material. Int. Res. J. Eng. Technol. 2018, 5, 3066-3068.
- Mouritz, A.P.; Gibson, A.G. Fire Properties of Polymer Composite Materials; Springer Science & Business Media: New York, NY, USA, 2007; p. 401, ISBN 978 1 4020 5356 6.
- Solomon, A.A.; Vinoth, J.; Sudhakar, R.; Hemalatha, G. Inspecting the behavior of insulated concrete form (icf) blocks with polypropylene sheet. Indian J. Sci. Res. 2017, 14, 114-121.
- Stamets, P. (2011). Growing Gourmet and Medicinal Mushrooms, Ten Speed Press. [3rd ed.].
- The Ellen Mc Arthur Foundation (2018, November 27). Towards the Circular Economy. Economic and Business Rationale for an Accelerated Transition. Available online: https://www.ellenmacarthurfoundation.org/assets/downloads/publications/Ellen-MacArthur-Foundation-Towards-the-Circular-Economy-vol.1.pdf.
- Stamets, P., and Chilton, J.S. (1983). The Mushroom Cultivator, Agarikon Press, Olympia. [1st ed.].
Cited by
Elsacker, E., Vandelook, S., Brancart, J., Peeters, E., & De Laet, L. (2019) · PLOS ONE · doi:10.1371/journal.pone.0213954 · Cited by 390
“Every growth parameter variation can result in changes in the material constitution and mechanical properties [3].”
BackgroundMethodInfluentialA comprehensive framework for the production of mycelium-based lignocellulosic composites
Elsacker, E., Vandelook, S., Van Wylick, A., Ruytinx, J., De Laet, L., & Peeters, E. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138431 · Cited by 308
Attias, N., Danai, O., Abitbol, T., Tarazi, E., Ezov, N., Pereman, I., & Grobman, Y. J. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119037 · Cited by 269
Material Function of Mycelium-Based Bio-Composite: A Review
Yang, L., Park, D., & Qin, Z. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.737377 · Cited by 214
Circular economy in biocomposite development: State-of-the-art, challenges and emerging trends
Shanmugam, V., Mensah, R. A., Försth, M., Sas, G., Restás, Á., Addy, C., Xu, Q., Jiang, L., Neisiany, R. E., Singha, S., et al. (2021) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2021.100138 · Cited by 218
Fungi as source for new bio-based materials: a patent review
Cerimi, K., Akkaya, K. C., Pohl, C., Schmidt, B., & Neubauer, P. (2019) · Fungal Biology and Biotechnology · doi:10.1186/s40694-019-0080-y · Cited by 210
Mycelium-Based Composite: The Future Sustainable Biomaterial
Alemu, D., Tafesse, M., & Mondal, A. K. (2022) · International Journal of Biomaterials · doi:10.1155/2022/8401528 · Cited by 197
Cellular agriculture — industrial biotechnology for food and materials
Rischer, H., Szilvay, G. R., & Oksman-Caldentey, K.-M. (2020) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2019.12.003 · Cited by 201
Packaging design for the circular economy: A systematic review
Zhu, Z., Liu, W., Ye, S., & Batista, L. (2022) · Sustainable Production and Consumption · doi:10.1016/j.spc.2022.06.005 · Cited by 204
“Girometta et al. (2019) summarised the thermodynamic and physico-mechanical properties of mycelium-based composites, and the production methods of shaping them into packaging materials, bricks, insulating panels and new-design objects.”
BackgroundAlaneme, K. K., Anaele, J. U., Oke, T. M., Kareem, S. A., Adediran, M., Ajibuwa, O. A., & Anabaranze, Y. O. (2023) · Alexandria Engineering Journal · doi:10.1016/j.aej.2023.10.012 · Cited by 209
Flexible Fungal Materials: Shaping the Future
Gandía, A., van den Brandhof, J. G., Appels, F. V. W., & Jones, M. P. (2021) · Trends in biotechnology · doi:10.1016/j.tibtech.2021.03.002 · Cited by 181
Fungi in Mycelium-Based Composites: Usage and Recommendations
Sydor, M., Cofta, G., Doczekalska, B., & Bonenberg, A. (2022) · Materials · doi:10.3390/ma15186283 · Cited by 152
“Improving the properties of this innovative material is the goal of many scientific and commercial endeavors [5,6].”
BackgroundJoshi, K., Meher, M. K., & Poluri, K. M. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b01047 · Cited by 171
Tacer-Caba, Z., Varis, J. J., Lankinen, P., & Mikkonen, K. S. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108728 · Cited by 133
Amazing Fungi for Eco-Friendly Composite Materials: A Comprehensive Review
Aiduang, W., Chanthaluck, A., Kumla, J., Jatuwong, K., Srinuanpan, S., Waroonkun, T., Oranratmanee, R., Lumyong, S., & Suwannarach, N. (2022) · Journal of Fungi · doi:10.3390/jof8080842 · Cited by 159
“Compressive strength is the ability of a material or structure to withstand loads tending to compress that material and is an important mechanical property that can be used to indicate a key feature in the creation of functional materials [27].”
BackgroundHuang, S., Dong, Q., Che, S., Li, R., & Tang, K. H. D. (2025) · Science of The Total Environment · doi:10.1016/j.scitotenv.2025.178911 · Cited by 132
Mycelium-Based Composites in Art, Architecture, and Interior Design: A Review
Sydor, M., Bonenberg, A., Doczekalska, B., & Cofta, G. (2021) · Polymers · doi:10.3390/polym14010145 · Cited by 138
“2019 [92] 108 37 Improvement in know-how is expected to improve the mechanical properties and to standardize the productive process, whereas insulation and thermal properties already have shown competitive results.”
BackgroundBruscato, C., Malvessi, E., Brandalise, R. N., & Camassola, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.150 · Cited by 134
“A few recent research studies have demonstrated the competitive performances of foam-like mycelium-based composites to EPS (Jiang et al., 2013, 2017; L opez Nava et al., 2016; Haneef et al., 2017; Girometta et al., 2019).”
BackgroundBitting, S., Derme, T., Lee, J., Mele, T. V., Dillenburger, B., & Block, P. (2022) · Biomimetics · doi:10.3390/biomimetics7020044 · Cited by 141
“As reported by Islam et al. [10] and Girometta [15], the balance between fungal and plant biomass can drastically determine the density of the composite, especially in the case of MBC. Implementations which prioritise material strength typically value higher density.”
BackgroundInfluentialSivaprasad, S., Byju, S. K., Prajith, C., Shaju, J., & Rejeesh, C. R. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.04.622 · Cited by 121
Fine-Tuning of Physicochemical Properties and Growth Dynamics of Mycelium-Based Materials
Antinori, M. E., Ceseracciu, L., Mancini, G., Heredia‐Guerrero, J. A., & Athanassiou, A. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b01031 · Cited by 121
Naturally grown mycelium-composite as sustainable building insulation materials
Zhang, X., Hu, J., Fan, X., & Yu, X. B. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.130784 · Cited by 121
Aiduang, W., Kumla, J., Srinuanpan, S., Thamjaree, W., Lumyong, S., & Suwannarach, N. (2022) · Journal of Fungi · doi:10.3390/jof8111125 · Cited by 135
A review of recent advances in fungal mycelium based composites
Madusanka, C., Udayanga, D., Nilmini, R., Rajapaksha, S. M., Hewawasam, C., Manamgoda, D. S., & Vasco‐Correa, J. (2024) · Discover Materials · doi:10.1007/s43939-024-00084-8 · Cited by 138
“2) [9].”
Biobased Materials from Microbial Biomass and Its Derivatives
Cottet, C., Tapias, Y. A. R., Delgado, J. F., de la Osa, O., Salvay, A. G., & Peltzer, M. A. (2020) · Materials · doi:10.3390/ma13061263 · Cited by 105
“Alternative to traditional polystyrene and polyurethane [69]”
Novel Mycelium-Based Biocomposites (MBB) as Building Materials
Zīmele, Z., Irbe, I., Grīniņš, J., Bikovens, O., Verovkins, A., & Bajāre, D. (2020) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2020.09646 · Cited by 94
Land availability in Europe for a radical shift toward bio-based construction
Göswein, V., Reichmann, J., Habert, G., & Pittau, F. (2021) · Sustainable Cities and Society · doi:10.1016/j.scs.2021.102929 · Cited by 99
Zhang, X., Fan, X., Li, M., Samia, A. C. S., & Yu, X. B. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.125870 · Cited by 93
Muiruri, J. K., Yeo, J. C. C., Zhu, Q., Ye, E., Loh, X. J., & Li, Z. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c00831 · Cited by 84
Carbon Footprint Assessment of a Novel Bio-Based Composite for Building Insulation
Carcassi, O. B., Minotti, P., Habert, G., Paoletti, I., Claude, S., & Pittau, F. (2022) · Sustainability · doi:10.3390/su14031384 · Cited by 92
Lingam, D., Narayan, S., Mamun, K. A., & Charan, D. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131841 · Cited by 81
Fungal Based Biopolymer Composites for Construction Materials
Răut, I., Călin, M., Vuluga, Z., Oancea, F., Paceagiu, J., Radu, N., Doni, M. B., Alexandrescu, E., Purcar, V., Gurban, A., et al. (2021) · Materials · doi:10.3390/ma14112906 · Cited by 80
“(2021) [40] consider the technology for mycelium biomaterials as a model of circular economy because it involves the optimization of resources and energy consumption compared to conventional products, valorization of by-products resulted from production process and biodegradability of products.”
BackgroundVerma, N., Eswari, S., & Mahapatra, C. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.110396 · Cited by 88
Ten decadal advances in fungal biology leading towards human well-being
Mapook, A., Hyde, K. D., Hassan, K., Kemkuignou, B. M., Čmoková, A., Surup, F., Kuhnert, E., Paomephan, P., Cheng, T., de Hoog, S., et al. (2022) · Fungal Diversity · doi:10.1007/s13225-022-00510-3 · Cited by 81
Functionality of Surface Mycelium Interfaces in Wood Bonding
Sun, W., Tajvidi, M., Howell, C., & Hunt, C. G. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18165 · Cited by 73
Sisti, L., Gioia, C., Totaro, G., Verstichel, S., Cartabia, M., Camere, S., & Celli, A. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113742 · Cited by 70
Self-citationHouette, T., Maurer, C., Niewiarowski, R., & Gruber, P. (2022) · Biomimetics · doi:10.3390/biomimetics7030103 · Cited by 76
“Throughout the production process of myceliated materials, various factors influence their acoustic, thermal, mechanical, and physical characteristics [12,13].”
BackgroundStrategies for Growing Large-Scale Mycelium Structures
Dessi-Olive, J. (2022) · Biomimetics · doi:10.3390/biomimetics7030129 · Cited by 64
Mycelium-Based Thermal Insulation for Domestic Cooling Footprint Reduction: A Review
Al-Qahtani, S., Koç, M., & Isaifan, R. J. (2023) · Sustainability · doi:10.3390/su151713217 · Cited by 65
Biodegradable green composites: It's never too late to mend
Rafiee, K., Schritt, H., Pleißner, D., Kaur, G., & Brar, S. K. (2021) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2021.100482 · Cited by 61
Biofabrication of Nanocellulose–Mycelium Hybrid Materials
Attias, N., Reid, M. S., Mijowska, S., Dobryden, I., Isaksson, M., Pokroy, B., Grobman, Y. J., & Abitbol, T. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.202000196 · Cited by 68
Compressive behaviour of anisotropic mycelium-based composites
Rigobello, A., & Ayres, P. (2022) · Scientific Reports · doi:10.1038/s41598-022-10930-5 · Cited by 60
Ghazvinian, A., & Gürsoy, B. (2022) · Biomimetics · doi:10.3390/biomimetics7020048 · Cited by 71
“The consensus is that the mechanical behavior of MBC is comparable to that of synthetic foams, with room for enhancement [10].”
BackgroundFungal and enzymatic pretreatments in hot-pressed lignocellulosic bio-composites: A critical review
Sun, W., Tajvidi, M., Hunt, C. G., Cole, B. J. W., Howell, C., Gardner, D. J., & Wang, J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.131659 · Cited by 64
Mohseni, A., Vieira, F. R., Pecchia, J. A., & Gürsoy, B. (2023) · Biomimetics · doi:10.3390/biomimetics8020257 · Cited by 59
“Biomaterials are materials that include at least one component that has been formed biologically and are completely biodegradable [1].”
BackgroundCharacterization of mycelia from wood-decay species by TGA and IR spectroscopy
Girometta, C. E., Dondi, D., Baiguera, R. M., Bracco, F., Branciforti, D. S., Buratti, S., Lazzaroni, S., & Savino, E. (2020) · Cellulose · doi:10.1007/s10570-020-03208-4 · Cited by 65
“…to medicinal species (Wasser 2014; Gargano et al. 2017); also for mycelium-based biocomposites physico-mechanical and thermodynamic properties of mycelium need to be exploited as many aspects still remain unclear (Haneef et al. 2017; Islam et al. 2017; Jones et al. 2018; Girometta et al. 2019).”
BackgroundSelf-citationWylick, A. V., Elsacker, E. V., Yap, L. L., Peeters, E., & Laêt, L. D. (2022) · Construction technologies and architecture · doi:10.4028/www.scientific.net/cta.1.652 · Cited by 66
“The biodegradability of mycelium however remains unexplored; this material property is stated in numerous publications (Girometta et al., 2019; Haneef et al., 2017; Jones et al., 2020), yet no experimental research can certify this claim and no detailed end of life scenario is available.”
BackgroundBonga, K. B., Bertolacci, L., Contardi, M., Paul, U. C., Zafar, M. S., Mancini, G., Marini, L., Ceseracciu, L., Fragouli, D., & Athanassiou, A. (2024) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300449 · Cited by 64
Effect of growth factors on the production of mycelium-based biofoam
Nashiruddin, N. I., Chua, K. S., Mansor, A. F., Rahman, R. A., Lai, J. C., Azelee, N. I. W., & Enshasy, H. A. E. (2021) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-021-02146-4 · Cited by 55
Hierarchical biopolymer‐based materials and composites
Fredricks, J. L., Jimenez, A. M., Grandgeorge, P., Meidl, R. A., Law, E., Fan, J., & Roumeli, E. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230126 · Cited by 64
Mycelium-Based Composites as a Sustainable Solution for Waste Management and Circular Economy
Barta, D.-G., Simion, I., Tiuc, A. E., & Vasile, O. (2024) · Materials · doi:10.3390/ma17020404 · Cited by 55
“This was undertaken to counteract the moisture decrease in the top layer due to the This was undertaken to counteract the moisture decrease in the top layer due to the gravitational sinking of the moisture [17,24]. gravitational sinking of the moisture [17,24].”
BackgroundInfluentialCollection and Characterization of Wood Decay Fungal Strains for Developing Pure Mycelium Mats
Cartabia, M., Girometta, C. E., Milanese, C., Baiguera, R. M., Buratti, S., Branciforti, D. S., Vadivel, D., Girella, A., Babbini, S., Savino, E., et al. (2021) · Journal of Fungi · doi:10.3390/jof7121008 · Cited by 52
Self-citationAngelova, G., Brazkova, M., & Krastanov, A. I. (2021) · Zeitschrift für Naturforschung C · doi:10.1515/znc-2021-0040 · Cited by 62
Angelova, G., Brazkova, M., Stefanova, P., Blazheva, D. E., Vladev, V. P., Petkova, N. T., Slavov, A. M., Denev, P. N., Karashanova, D. B., Zaharieva, R., et al. (2021) · Journal of Fungi · doi:10.3390/jof7100866 · Cited by 48
“For mycelium-based bio-composites, it has also been established that density is an important factor regarding the competitiveness of these materials and their applications [23].”
BackgroundInfluentialWood-Veneer-Reinforced Mycelium Composites for Sustainable Building Components
Özdemir, E., Saeidi, N., Javadian, A., Rossi, A., Nolte, N., Ren, S., Dwan, A., Acosta, I., Hebel, D. E., Wurm, J., et al. (2022) · Biomimetics · doi:10.3390/biomimetics7020039 · Cited by 53
“For construction applications, to date only mycelium-based foam (MBF) and mycelium-based sandwich composites (MBSC) have been developed and investigated for their properties [24].”
BackgroundSutkowska, M., Stefańska, A., Vaverková, M. D., Dixit, S., & Thakur, A. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109558 · Cited by 64
Jose, J., Uvais, K. N., Sreenadh, T. S., Deepak, A. V., & Rejeesh, C. R. (2021) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-020-05247-2 · Cited by 47
Nussbaumer, M., Opdenbosch, D. V., Engelhardt, M., Briesen, H., Benz, J. P., & Karl, T. (2023) · Environmental Technology & Innovation · doi:10.1016/j.eti.2023.103063 · Cited by 44
Abdallah, Y. K., & Estévez, A. T. (2023) · Biomimetics · doi:10.3390/biomimetics8060504 · Cited by 48
“As well as reducing thickness and increasing fiber connection between the walls of the fibers at points of overlap [40,112].”
BackgroundInfluentialHuang, Z., Wei, Y., & Hadigheh, S. A. (2024) · Buildings · doi:10.3390/buildings14010155 · Cited by 45
Recent advances in the construction of biocomposites based on fungal mycelia
Li, K., Jia, J., Wu, N., & Xu, Q. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.1067869 · Cited by 46
“Previous reviews (Appels et al., 2019; Girometta et al., 2019; Sharma and Sumbria, 2022) on this topic have mainly described hyphal composites based on polymer-based materials, focusing on a single function of the material.”
BackgroundA review of bast fibres and their composites: Part 4 ~ organisms and enzyme processes
Summerscales, J. (2020) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.106149 · Cited by 42
Fungal architecturePreprint
Adamatzky, A., Ayres, P., Belotti, G., & Wösten, H. A. B. (2019) · Architecture, Design and Conservation (Aarhus School of Architecture, Design School Kolding, The Royal Danish Academy of Fine Arts, Schools of Architecture, Design and Conservation (KADK)) · doi:10.48550/arxiv.1912.13262 · Cited by 53
“Structural characteristics of fungal materials are proven, including recent studies on fabrication factors influencing mechanical, moisture-and waterrelated properties of mycelium-based composites [5] to be suitable for construction industry [19].”
BackgroundSoon, C. F., Yee, S. K., Nordin, A. N., Rahim, R. A., Ling, N., Hamid, I. S. L. A., Tee, K. S., Azmi, N. H., Sunar, N. M., & Heng, C. (2024) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-024-01027-2 · Cited by 42
“However, due to their inherent inelastic properties, mycelium-based PCBs may undergo permanent deformation upon folding [45].”
Living mycelium composites discern weights via patterns of electrical activity
Adamatzky, A., & Gandía, A. (2022) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2021.09.003 · Cited by 49
Irbe, I., Loris, G. D., Fiļipova, I., Andze, L., & Skute, M. (2022) · Materials · doi:10.3390/ma15217608 · Cited by 43
“resulting in a biocomposite material [3].”
BackgroundMycelium-based wood composites for light weight and high strength by experiment and machine learning
Yang, L., & Zhao Qin, A. (2023) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2023.101424 · Cited by 39
Mycelium Composites for Sustainable Development in Developing Countries: The Case for Africa
Akromah, S., Chandarana, N., & Eichhorn, S. J. (2023) · Advanced Sustainable Systems · doi:10.1002/adsu.202300305 · Cited by 44
Mushroom Mycelia-Based Material: An Environmental Friendly Alternative to Synthetic Packaging
Mojumdar, A., Behera, H. T., & Ray, L. (2021) · Springer eBooks · doi:10.1007/978-981-16-0045-6_6 · Cited by 37
Mycelium as sustainable textile material – review on recent research and future prospective
Rathinamoorthy, R., Bharathi, T. S., Snehaa, M., & Swetha, C. (2023) · International Journal of Clothing Science and Technology · doi:10.1108/ijcst-01-2022-0003 · Cited by 37
Chulikavit, N., Huynh, T. T., Dekiwadia, C. D., Khatibi, A. A., Mouritz, A. P., & Kandare, E. (2022) · Scientific Reports · doi:10.1038/s41598-022-19458-0 · Cited by 42
Mem-fractive properties of mushrooms
Beasley, A. E., Abdelouahab, M.-S., Lozi, R., Tsompanas, M., Powell, A. L., & Adamatzky, A. (2021) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/ac2e0c · Cited by 38
Deschamps, J. L. D. N., Schulz, J. G., Riani, J. C., Chaves, M. B., Bonatti, M., Sieber, S., Lana, M., & Wisbeck, E. (2024) · Scientific Reports · doi:10.1038/s41598-024-77435-1 · Cited by 32
“Air humidity sorption is a property of significance in determining the quality and durability of the final product 17,56,59 .”
BackgroundInfluentialFungal biocomposites: How process engineering affects composition and properties?
Rafiee, K., Kaur, G., & Brar, S. K. (2021) · Bioresource Technology Reports · doi:10.1016/j.biteb.2021.100692 · Cited by 37
Alemu, D., Tafesse, M., & Deressa, Y. G. (2022) · Advances in Materials Science and Engineering · doi:10.1155/2022/2876643 · Cited by 34
Mycomerge: Fabrication of Mycelium-Based Natural Fiber Reinforced Composites on a Rattan Framework
Nguyen, M. T., Solueva, D., Spyridonos, E., & Dahy, H. (2022) · Biomimetics · doi:10.3390/biomimetics7020042 · Cited by 31
“insulation, or as a replacement to standard expanded polystyrene packaging [10].”
BackgroundInfluentialHybridizations and reinforcements in mycelium composites: A review
Womer, S., Huynh, T. T., & John, S. (2023) · Bioresource Technology Reports · doi:10.1016/j.biteb.2023.101456 · Cited by 33
Gradient porous structures of mycelium: a quantitative structure–mechanical property analysis
Olivero, E., Gawrońska, E., Manimuda, P., Jivani, D., Chaggan, F. Z., Corey, Z., de Almeida, T. S., Kaplan-Bie, J., McIntyre, G., Wodo, O., et al. (2023) · Scientific Reports · doi:10.1038/s41598-023-45842-5 · Cited by 29
From waste to wealth: converting rubber wood sawdust into green mycelium-based composite
Shakir, M. A., Ahmad, M. I., Yusup, Y., & Rafatullah, M. (2023) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-023-05113-9 · Cited by 28
“As a result, there is a growing focus on the development of sustainable alternatives, and the combination of natural waste fiber from rubber wood sawdust and mycelium has emerged as a promising green composite material with potential applications in packaging and thermal insulation material [6, 7].”
Mohtar, W. H. M. W., Wan‐Mohtar, W. A. A. Q. I., Zahuri, A. A., Ibrahim, M. F., Show, P.-L., Ilham, Z., Jamaludin, A. A., Patah, M. F. A., Usuldin, S. R. A., & Rowan, N. J. (2022) · Bioengineered · doi:10.1080/21655979.2023.2184785 · Cited by 31
Korjakins, A., Šahmenko, G., & Lapkovskis, V. (2025) · Applied Sciences · doi:10.3390/app15094644 · Cited by 37
Rūtītis, D., Smoca, A., Uvarova, I., Brizga, J., Atstāja, D., & Mavļutova, I. (2022) · Energies · doi:10.3390/en15020466 · Cited by 37
Ferrand, H. L. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.141859 · Cited by 26
Geldermans, B., Tenpierik, M., & Luscuere, P. G. (2019) · Buildings · doi:10.3390/buildings9090194 · Cited by 31
Mycelium bricks and composites for sustainable construction industry: a state-of-the-art review
Sharma, R., & Sumbria, R. (2022) · Innovative Infrastructure Solutions · doi:10.1007/s41062-022-00903-y · Cited by 25
“Objectives of LCA include verbalization and self-training in design, manufacturing procedure and its management with a positive response [34].”
Mbabali, H., Lubwama, M., Yiga, V. A., Were, E., & Kasedde, H. (2023) · Journal of The Institution of Engineers (India) Series D · doi:10.1007/s40033-023-00458-x · Cited by 26
“Mycelium-based foams in categories of lightweight “bricks” and panels notably possess considerable mechanical strength coupled with enormous environmental advantages when compared to expanded polystyrene [19, 56].”
InfluentialGauvin, F., Tsao, V., Vette, J., & Brouwers, H. J. H. (2022) · Construction technologies and architecture · doi:10.4028/www.scientific.net/cta.1.643 · Cited by 28
“Studies have shown mycelium composites can be alternative sustainable materials to replace petroleum-derived foams used in the current conventional insulation market (Girometta et al., 2019).”
BackgroundPackaging Applications of Fungal Mycelium-Based Biodegradable Composites
Rajendran, R. C. (2022) · Springer eBooks · doi:10.1007/978-981-19-1000-5_11 · Cited by 24
Chitosan/chitin-based composites for food packaging applications
Zubair, M., Arshad, M., Pradhan, R. A., & Ullah, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817966-6.00020-0 · Cited by 24
BASICS OF BUILDING WITH MYCELIUM-BASED BIO-COMPOSITES
Ghazvinian, A., & Gürsoy, B. (2022) · Journal of Green Building · doi:10.3992/jgb.17.1.37 · Cited by 26
Sreerag, N. K., Kashyap, P., Shilpa, V. S., Thakur, M., & Gökşen, G. (2024) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2024.2423949 · Cited by 24
Fungal Mycelium-Based Biocomposites: An Emerging Source of Renewable Materials
Udayanga, D., & Miriyagalla, S. (2021) · Springer eBooks · doi:10.1007/978-981-16-3840-4_27 · Cited by 23
The Amazing Potential of Fungi in Human Life
(2019) · ARC Journal of Pharmaceutical Sciences · doi:10.20431/2455-1538.0503003 · Cited by 23
“Only a few pioneer companies in the world retain a significant know-how, as well as the ability to provide the material characterization [27-29].”
BackgroundJinanukul, P., Kumla, J., Aiduang, W., Thamjaree, W., Oranratmanee, R., Shummadtayar, U., Tongtuam, Y., Lumyong, S., Suwannarach, N., & Waroonkun, T. (2024) · Journal of Fungi · doi:10.3390/jof10090634 · Cited by 27
“One of the promising alternatives is mycelium, derived from fungi, which shows great potential as a green adhesive material, replacing synthetic adhesives in lignocellulose-based composite production and creating mycelium-based composites (MBCs) [18–24].”
BackgroundBabenko, M., Kononets, Y., Bartoš, P., Pont, U. J., Špalek, F., Zoubek, T., & Kříž, P. (2024) · Biomimetics · doi:10.3390/biomimetics9110707 · Cited by 21
Novel strategies to grow natural fibers with improved thermal stability and fire resistance
Zhang, X., Fan, X., Han, C., Li, Y., Price, E. J., Wnek, G. E., Liao, Y.-T. T., & Yu, X. B. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128729 · Cited by 21
Abdelhady, O., Spyridonos, E., & Dahy, H. (2023) · Designs · doi:10.3390/designs7010020 · Cited by 22
“Hemp substrate was chosen and found to be compatible with mycelium, achieving greater stiffness [9,17].”
BackgroundInfluentialChayaamor-Heil, N., Houette, T., Demirci, Ö., & Badarnah, L. (2024) · Sustainability · doi:10.3390/su16020673 · Cited by 20
Angelova, G., Yemendzhiev, H., Zaharieva, R., Brazkova, M., Koleva, R., Stefanova, P., Baldzhieva, R., Vladev, V. P., & Krastanov, A. I. (2025) · Applied Sciences · doi:10.3390/app15116333 · Cited by 20
Ilgün, A., & Schmickl, T. (2022) · Biomimetics · doi:10.3390/biomimetics7020075 · Cited by 20
“Mycelium-based composites are made by growing the mycelium homogeneously in and around organic waste materials and are generally used for mesoscale modular applications such as bricks [37], thermal insulation, or acoustic panels [38,39], and low-value materials such as packaging [40].”
Background
Metadata
- Authors
- Girometta, C., Picco, A. M., Baiguera, R. M., Dondi, D., Babbini, S., Cartabia, M., Pellegrini, M., & Savino, E.
- Affiliations
- University of Pavia (IT)
- MOGU S.r.l., Via S. Francesco, 61, 21020 Inarzo, VA, Italy
- Corresponding author
- Picco, Anna Maria
- ORCID
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2019-01-08
- Volume
- 11
- Issue
- 1
- Pages
- 281
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2897497425
- Cited by
- 276
- References
- 81
- Citations by year
- 2026: 39 · 2025: 40 · 2024: 47 · 2023: 53 · 2022: 44 · 2021: 31 · 2020: 14 · 2019: 8
- FWCI
- 10.36
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Foaming and Composites
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Keywords
- sandwich composites, lignocellulosic waste valorization, fungal growth, thermal insulation, sound insulation, mechanical properties, physico-mechanical properties, thermodynamic properties, circular economy, packaging materials, insulating panels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.