The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Mycelium bio-composites in industrial design and architecture: Comparative review and experimental analysis
Abstract
Abstract Recent convergence of biotechnological and design tools has stimulated an emergence of new design practices utilizing natural mechanisms to program matter in a bottom-up approach. In this paper, the fibrous network of mycelium—the vegetative part of fungi—is employed to produce sustainable alternatives for synthetic foams. Current research on mycelium-based materials lacks essential details regarding material compositions, incubation conditions, and fabrication methods. The paper presents the results of ongoing research on employing mycelium to provide cleaner architecture and design products with sustainable lifecycles. The paper opens with a critical review of current projects, products, and scientific literature using mycelium in design and architecture. In the second section, material properties of varied fungi-substrate compositions and fabrication methods are evaluated and compared through changes in essential chemical parameters during fermentation, visual impression, water absorbency, and compression strength tests. Then, potential architecture and design implications related to the material properties are discussed. Results indicate a clear correlation between fungi, substrate, mold properties, and incubation conditions on final material characteristics, depicting a clear effect on material density, water absorbency, and the compressive strength of the final bio-composite. Finally, two primary case studies demonstrate implications for mycelium-based composites for circular design and architectural applications. The study shows that in order to produce desirable designs and performance within an inclusive circular approach, parameters such as material composition and fabrication conditions should be considered according to the target function of the final product throughout the design process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Feasibility of Bioremediation by White-Rot Fungi
S., P. (2001) · Applied Microbiology and Biotechnology · doi:10.1007/s002530100745 · Cited by 954
The amazing potential of fungi: 50 ways we can exploit fungi industrially
Hyde, K. D., Xu, J., Rapior, S., Jeewon, R., Lumyong, S., Niego, A. G. T., Abeywickrama, P. D., Aluthmuhandiram, J. V. S., Brahamanage, R. S., Brooks, S., et al. (2019) · Fungal Diversity · doi:10.1007/s13225-019-00430-9 · Cited by 811
Advanced Materials From Fungal Mycelium: Fabrication and Tuning of Physical Properties
Haneef, M., Ceseracciu, L., Canale, C., Bayer, I. S., Heredia-Guerrero, J. A., & Athanassiou, A. (2017) · Scientific Reports · doi:10.1038/srep41292 · Cited by 704
Appels, F. V. W., Camere, S., Montalti, M., Karana, E., Jansen, K. M. B., Dijksterhuis, J., Krijgsheld, P., & Wösten, H. A. B. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.11.027 · Cited by 516
Mushroom cultivation in the circular economy
Grimm, D., & Wösten, H. A. B. (2018) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-018-9226-8 · Cited by 484
Morphology and mechanics of fungal mycelium
Islam, M. R., Tudryn, G., Bucinell, R., Schadler, L., & Picu, R. C. (2017) · Scientific Reports · doi:10.1038/s41598-017-13295-2 · Cited by 361
Holt, G. A., Mcintyre, G., Flagg, D., Bayer, E., Wanjura, J. D., & Pelletier, M. G. (2012) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2012.1241 · Cited by 283
Physico-mechanical and thermodynamic properties of mycelium-based biocomposites: a review
Girometta, C., Picco, A. M., Baiguera, R. M., Dondi, D., Babbini, S., Cartabia, M., Pellegrini, M., & Savino, E. (2019) · Sustainability · doi:10.3390/su11010281 · Cited by 276
Mycelium composites: a review of engineering characteristics and growth kinetics
Jones, M., Huynh, T., Dekiwadia, C., Daver, F., & John, S. (2017) · Journal of Bionanoscience · doi:10.1166/jbns.2017.1440 · Cited by 270
Xu, G., Wang, L., Liu, J., & Wu, J. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.05.065 · Cited by 264
Cited by
Engineered mycelium composite construction materials from fungal biorefineries: A critical review
Jones, M., Mautner, A., Luenco, S., Bismarck, A., & John, S. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108397 · Cited by 591
Growing a circular economy with fungal biotechnology: a white paper
Meyer, V., Basenko, E. Y., Benz, J. P., Braus, G. H., Caddick, M. X., Csukai, M., de Vries, R. P., Endy, D., Frisvad, J. C., Gunde-Cimerman, N., et al. (2020) · Fungal Biology and Biotechnology · doi:10.1186/s40694-020-00095-z · Cited by 515
“A range of mycelium composite materials with different properties can be produced [46].”
Background
Metadata
- Authors
- Attias, N., Danai, O., Abitbol, T., Tarazi, E., Ezov, N., Pereman, I., & Grobman, Y. J.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 246
- Pages
- 119037
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2989137589
- Cited by
- 269
- References
- 33
- FWCI
- 12.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mycelium bio-composites in industrial design and architecture: Comparative review and experimental analysis. https://app.cochat.ai/papers/10.1016/j.jclepro.2019.119037
- The paper
- Attias, N., Danai, O., Abitbol, T., Tarazi, E., Ezov, N., Pereman, I., & Grobman, Y. J. (2020). Mycelium bio-composites in industrial design and architecture: Comparative review and experimental analysis. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.119037
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.