Physico-Mechanical and Thermodynamic Properties of Mycelium-Based Biocomposites: A Review
Open accessThe DOI matches its Crossref record; 79 of the 81 references it cites were found in a registry or an index.
Abstract
Reducing the use of non-renewable resources is a key strategy of a circular economy. Mycelium-based foams and sandwich composites are an emerging category of biocomposites relying on the valorization of lignocellulosic wastes and the natural growth of the living fungal organism. While growing, the fungus cements the substrate, which is partially replaced by the tenacious biomass of the fungus itself. The final product can be shaped to produce insulating panels, packaging materials, bricks or new-design objects. Only a few pioneer companies in the world retain a significant know-how, as well as the ability to provide the material characterization. Moreover, several technical details are not revealed due to industrial secrecy. According to the available literature, mycelium-based biocomposites show low density and good insulation properties, both related to acoustic and thermal aspects. Mechanical properties are apparently inferior in comparison to expanded polystyrene (EPS), which is the major synthetic competitor. Nevertheless, mycelium-based composites can display an enormous variability on the basis of: fungal species and strain; substrate composition and structure; and incubation conditions. The aim of the present review is to summarize technical aspects and properties of mycelium-based biocomposites focusing on both actual applications and future perspectives.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 μ m ( H ), 50 μ m ( C , G , K ), 20 μ m ( L ) and 10 μ m ( D ). Reprinted with permission of Apples et al. (2019) [18]. Figure 2. Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 µ m( H ), 50 µ m( C , G , K ), 20 µ m( L ) and 10 µ m( D ). Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/39c84f99e68d4fcaad666827f0ef34d9/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-2.png)
![Figure 3 Diagram showing the production and life cycle of mycelium-based materials. The picture also shows how these materials comply with circular thinking. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].](https://figures.cochat.ai/paper-figures/ed081962da034a53970821618a99adac/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-3.png)
![Figure 4 Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36] . Figure 4. Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36]. Sustainability 2019 , 11 , x FOR PEER REVIEW 6 of 23](https://figures.cochat.ai/paper-figures/7bbd01c3766e4b769bd36b37bcc0dafa/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-4.png)
![Figure 5 Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22]. Figure 5. Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22].](https://figures.cochat.ai/paper-figures/9b2214683ec448b7abf4ab02fe062b6d/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-5.png)
![Figure 6 Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18]. Figure 6. Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/3c96dc8d66814fe48890af52edb92b6d/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-6.png)
![Figure 7 Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31]. Figure 7. Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].](https://figures.cochat.ai/paper-figures/9adbf69f22cb4e4199713ee10c10482a/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-7.png)
![Figure 8 Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. Figure 8. Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/925c988d6c51419fa5ee3fe2d0733743/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-8.png)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“They can be produced into various shapes, which make them an ideal candidate not only for construction but also packaging materials (Girometta et al., 2019).”
From Packaging design for the circular economy: A systematic review (2022) · cites this paper as Girometta et al., 2019
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Chitin and chitosan polymers: Chemistry, solubility and fiber formation
Pillai, C. K. S., Paul, W., & Sharma, C. P. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.001 · Cited by 2,745 · cited 2×
“is, 100% acetylation is not expected in fibrils regarded as chitin [58,59].”
BackgroundAinsworth and Bisbys Dictionary of the Fungi
(2008) · CABI eBooks · doi:10.1079/9780851998268.0000 · Cited by 2,202
Chitosan-based biomaterials for tissue engineering
Croisier, F., & Jérôme, C. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.009 · Cited by 2,149 · cited 1×
“All told, chitosan seems to be more versatile than chitin for industrial and bioengineering applications; basically, it represents the most important chitin derivative, much easier to obtain and to couple with other molecules as amorphous [60,61].”
BackgroundISO (International Organization for Standardization)
Nollet, L. M. L. (2019) · Testing and Analysis of GMO-containing Foods and Feed · doi:10.1201/9781315178592-10 · Cited by 1,895
Production of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687 · cited 1×
“Moreover, the term “fibre” has different meaning in chemistry, materials engineering and botany [2-5].”
BackgroundThe structure and synthesis of the fungal cell wall
Bowman, S. M., & Free, S. J. (2006) · BioEssays · doi:10.1002/bies.20441 · Cited by 1,317 · cited 1×
“Aside from H-bonds, chitin has been reported to be covalently bonded to polysaccharides and thus to peptides [56,57].”
BackgroundOccurrence, Toxicity, and Analysis of Major Mycotoxins in Food
Alshannaq, A., & Yu, J.-H. (2017) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph14060632 · Cited by 1,265 · cited 1×
“According to the BAT, edible and/or medicinal macro-species usually are adopted due to their morphological features and cultivability; notably, they are far from being related to the production of mycotoxins or toxic volatile/soluble metabolites [99,100].”
BackgroundInsulation materials for the building sector: A review and comparative analysis
Schiavoni, S., D׳Alessandro, F., Bianchi, F., & Asdrubali, F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.045 · Cited by 993 · cited 1×
“MBFs, by relying on the BAT, already can be regarded as competitive towards unconventional insulation materials, although a decrease of about 33% in thermal conductivity is required to be fully competitive with commercial materials [50,54].”
BackgroundA review of unconventional sustainable building insulation materials
Asdrubali, F., D'Alessandro, F., & Schiavoni, S. (2015) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2015.05.002 · Cited by 952 · cited 1×
“MBFs, by relying on the BAT, already can be regarded as competitive towards unconventional insulation materials, although a decrease of about 33% in thermal conductivity is required to be fully competitive with commercial materials [50,54].”
BackgroundA review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801 · cited 1×
“Moreover, the term “fibre” has different meaning in chemistry, materials engineering and botany [2-5].”
BackgroundStefanidis, S. D., Kalogiannis, K. G., Iliopoulou, E. F., Michailof, C. M., Pilavachi, P. A., & Lappas, A. A. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.013 · Cited by 775 · cited 1×
“Moreover, the performance of an intimate mixture of the mentioned molecules, such as a typical plant stem, behaves differently with respect to its separate components; that is, the typical thermogravimetric analysis (TGA) curve for a wood sample shows the major weight loss peak placed at about 500 ◦C [76,77].”
BackgroundPlant fibre based bio-composites: Sustainable and renewable green materials
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.094 · Cited by 764 · cited 1×
“Such ranges are more or less narrow according to the tested material and can be negligible in comparison to the overall temperature range adopted to carry out the TGA, that is typically 900 K [14, 42, 43].”
BackgroundHydrophobins: Multipurpose Proteins
Wösten, H. A. B. (2001) · Annual Review of Microbiology · doi:10.1146/annurev.micro.55.1.625 · Cited by 704 · cited 1×
“Found in the fungal organism, hydrophobins are involved in several functions related to cell wall morphogenesis, hydrophobicity and substrate adhesion, both in aqueous and aerial environments [78,79].”
BackgroundAdvanced Materials From Fungal Mycelium: Fabrication and Tuning of Physical Properties
Haneef, M., Ceseracciu, L., Canale, C., Bayer, I. S., Heredia-Guerrero, J. A., & Athanassiou, A. (2017) · Scientific Reports · doi:10.1038/srep41292 · Cited by 704 · cited 11×
“The ultimate tensile strength was reported in the range of 100–300 kPa in the multi-layer mycelial material described by Islam et al. (2017) [49] as it regards to the mycelial component, whereas it ranged between 200 and 1200 kPa according to Haneef et al. (2017) [82].”
BackgroundInfluentialBio-based flame retardants: When nature meets fire protection
Costes, L., Laoutid, F., Brohez, S., & Dubois, P. (2017) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2017.04.001 · Cited by 688 · cited 1×
“Several studies report chitosan as a promising additive in flame retardants, mostly relying on the stabilization of materials at high temperatures [62,63].”
BackgroundGreen composites: a review of material attributes and complementary applications
Dicker, M. P. M., Duckworth, P. F., Baker, A. B., Francois, G., Hazzard, M. K., & Weaver, P. M. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.014 · Cited by 650 · cited 2×
“Far from being a univocal definition, biocomposites have been referred to by Dicker et al. (2014) [1] as composite materials, where a bio-polymer or bio-derived polymer is reinforced by natural fibers.”
BackgroundCorazzari, I., Nisticò, R., Turci, F., Faga, M. G., Franzoso, F., Tabasso, S., & Magnacca, G. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.12.006 · Cited by 536 · cited 3×
“is, 100% acetylation is not expected in fibrils regarded as chitin [58,59].”
BackgroundAppels, F. V. W., Camere, S., Montalti, M., Karana, E., Jansen, K. M. B., Dijksterhuis, J., Krijgsheld, P., & Wösten, H. A. B. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.11.027 · Cited by 516 · cited 5×
“(2018) [18], who tested tensile strength, both in panels produced with P.”
BackgroundInfluentialSkills and capabilities for a sustainable and circular economy: The changing role of design
De los Rios, I. C., & Charnley, F. J. S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.130 · Cited by 479
Thermal decomposition of hemicelluloses
Werner, K., Pommer, L., & Broström, M. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.08.013 · Cited by 457 · cited 1×
“To be exact, pure crystalline cellulose has a narrow main peak at about 350 ◦C, which is higher than hemicelluloses; the latter, moreover, display a broad range for weight loss (200–375 ◦C) [73].”
BackgroundCellulose, xylan and lignin interactions during pyrolysis of lignocellulosic biomass
Yu, J., Paterson, N., Blamey, J., & Millan, M. (2017) · Fuel · doi:10.1016/j.fuel.2016.11.057 · Cited by 452 · cited 1×
“Moreover, the performance of an intimate mixture of the mentioned molecules, such as a typical plant stem, behaves differently with respect to its separate components; that is, the typical thermogravimetric analysis (TGA) curve for a wood sample shows the major weight loss peak placed at about 500 ◦C [76,77].”
BackgroundComparison of the pyrolysis behavior of lignins from different tree species
Wang, S., Wang, K., Liu, Q., Gu, Y., Luo, Z., Cen, K., & Fransson, T. (2009) · Biotechnology Advances · doi:10.1016/j.biotechadv.2009.04.010 · Cited by 405
The contribution of cell wall proteins to the organization of the yeast cell wall
Kapteyn, J. C., Van Den Ende, H., & Klis, F. M. (1999) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/s0304-4165(98)00137-8 · Cited by 386 · cited 1×
“Aside from H-bonds, chitin has been reported to be covalently bonded to polysaccharides and thus to peptides [56,57].”
BackgroundMorphology and mechanics of fungal mycelium
Islam, M. R., Tudryn, G., Bucinell, R., Schadler, L., & Picu, R. C. (2017) · Scientific Reports · doi:10.1038/s41598-017-13295-2 · Cited by 361 · cited 9×
“The ultimate tensile strength was reported in the range of 100–300 kPa in the multi-layer mycelial material described by Islam et al. (2017) [49] as it regards to the mycelial component, whereas it ranged between 200 and 1200 kPa according to Haneef et al. (2017) [82].”
BackgroundInfluentialMechanical, Thermal, and Electrical Properties of Graphene-Epoxy Nanocomposites—A Review
Atif, R., Shyha, I., & Inam, F. (2016) · Polymers · doi:10.3390/polym8080281 · Cited by 360
Duo-Chuan, L. (2006) · Mycopathologia · doi:10.1007/s11046-006-0024-y · Cited by 344 · cited 1×
“Since chitin has been estimated to be one of the most abundant biopolymers in the world, the ecological function of chitinases is enormous and they have evolved into a wide family, where fungal chitinases are only a sub-family [106].”
BackgroundWhen the Material Grows: A Case Study on Designing (with) Mycelium-Based Materials
Karana, E., Blauwhoff, D. R. L. M., Hultink, E. J., & Camere, S. (2018) · Research Repository (Delft University of Technology) · Cited by 290
Rognoli, V., Bianchini, M., Maffei, S., & Karana, E. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.020 · Cited by 285
Holt, G. A., Mcintyre, G., Flagg, D., Bayer, E., Wanjura, J. D., & Pelletier, M. G. (2012) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2012.1241 · Cited by 283 · cited 18×
“(2012) [40] conducted a complete physical characterization, including compressive strength.”
BackgroundMethodInfluentialLu, T., Liu, S., Jiang, M., Xu, X., Wang, Y., Wang, Z., Gou, J., Hui, D., & Zhou, Z. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.02.030 · Cited by 276 · cited 1×
“Analogously, bio-based materials are defined as materials containing at least one component that is biologically produced and completely biodegradable [6]; thus, such a definition does not exclude the presence of other synthetic components [7].”
BackgroundCaseins and hydrophobins as novel green flame retardants for cotton fabrics
Alongi, J., Carletto, R. A., Bosco, F., Carosio, F., Di Blasio, A., Cuttica, F., Antonucci, V., Giordano, M., & Malucelli, G. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.11.016 · Cited by 271 · cited 1×
“Reducing the release of volatile species hampers complete combustion and favors charring instead [81].”
BackgroundMycelium composites: a review of engineering characteristics and growth kinetics
Jones, M., Huynh, T., Dekiwadia, C., Daver, F., & John, S. (2017) · Journal of Bionanoscience · doi:10.1166/jbns.2017.1440 · Cited by 270 · cited 2×
“Since the study focused on damping the dominant road frequencies, intra-wall panels might be applied for joint thermal-acoustic insulation [46].”
BackgroundAn evaluation study of mycelium based acoustic absorbers grown on agricultural by-product substrates
Pelletier, M. G., Holt, G. A., Wanjura, J. D., Bayer, E., & McIntyre, G. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.09.008 · Cited by 219 · cited 5×
“(2013) [43] tested panels using different substrates and reported an acoustic absorption of over 70–75% at 1000 Hz, even by the worst performing samples.”
BackgroundInfluentialPhysical and Mechanical Properties of Fungal Mycelium-Based Biofoam
Yang, Z. (., Zhang, F., Still, B., White, M., & Amstislavski, P. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001866 · Cited by 208 · cited 11×
“Indeed, moisture was shown to negatively affect elastic modulus by Yang et al. (2017) [48].”
BackgroundInfluentialSustainable packaging applications from mycelium to substitute polystyrene: a review
Abhijith, R., Ashok, A., & Rejeesh, C. R. (2018) · Materials Today: Proceedings · doi:10.1016/j.matpr.2017.09.211 · Cited by 189 · cited 1×
“Despite the production still being limited to a few companies in the world, the productive process is improving quickly, resulting in high-quality materials at reasonably low costs [46,47].”
BackgroundWaste‐derived low‐cost mycelium composite construction materials with improved fire safety
Jones, M., Bhat, T., Huynh, T., Kandare, E., Yuen, R., Wang, C. H., & John, S. (2018) · Fire and Materials · doi:10.1002/fam.2637 · Cited by 177 · cited 11×
“(2018) [44] demonstrated the CO release displays a highly complex profile as a function of time and tested matrix, that is, different substrates provide different profiles.”
BackgroundResultInfluentialAppels, F. V. W., Dijksterhuis, J., Lukasiewicz, C. E., Jansen, K. M. B., Wösten, H. A. B., & Krijgsheld, P. (2018) · Scientific Reports · doi:10.1038/s41598-018-23171-2 · Cited by 173 · cited 12×
“Although Appels et al. (2018) [80] did not explicitly investigate the effect of residual moisture on the mechanical properties, their results clearly show that heat pressing increases tensile strength, flexural strength and elastic modulus.”
BackgroundResultInfluentialLiu, Y., Wang, Q.-Q., Jiang, Z.-M., Zhang, C.-J., Li, Z.-F., Chen, H.-Q., & Zhu, P. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.08.024 · Cited by 171 · cited 2×
“Analogous results have been reported by Pan et al. (2015), Fang et al. (2015) and Liu et al. (2018) [65–67] with respect to a multi-layer coating made of various chitin derivatives.”
ResultIfuku, S., Ikuta, A., Egusa, M., Kaminaka, H., Izawa, H., Morimoto, M., & Saimoto, H. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.07.033 · Cited by 163 · cited 2×
“The introduction of chitin nanofibers in chitosan films, gelatin methacryloyl, has been reported to significantly increase Young’s modulus [88,90] for example.”
BackgroundPan, H., Wang, W., Pan, Y., Song, L., Hu, Y., & Liew, K. M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.08.084 · Cited by 160 · cited 2×
“Analogous results have been reported by Pan et al. (2015), Fang et al. (2015) and Liu et al. (2018) [65–67] with respect to a multi-layer coating made of various chitin derivatives.”
ResultDeacon, J. W. (2005) · Wiley eBooks · doi:10.1002/9781118685068 · Cited by 155
Identification of wood-inhabiting fungi in pure culture.
Stalpers, J. A. (1978) · Studies in Mycology · Cited by 149
Fang, F., Zhang, X., Meng, Y., Gu, Z., Bao, C., Ding, X., Li, S., Chen, X., & Tian, X. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.11.011 · Cited by 147 · cited 2×
“Analogous results have been reported by Pan et al. (2015), Fang et al. (2015) and Liu et al. (2018) [65–67] with respect to a multi-layer coating made of various chitin derivatives.”
ResultÁlvarez, S. P. O., Ramirez-Cadavid, D. A., Sierra, D. M. E., Orozco, C. P. O., Rojas, D., Ocampo, P. Z., & Atehortúa, L. (2014) · BioMed Research International · doi:10.1155/2014/169071 · Cited by 143
A Biomimetic Composite from Solution Self‐Assembly of Chitin Nanofibers in a Silk Fibroin Matrix
Jin, J., Hassanzadeh, P., Perotto, G., Sun, W., Brenckle, M. A., Kaplan, D., Omenetto, F. G., & Rolandi, M. (2013) · Advanced Materials · doi:10.1002/adma.201301429 · Cited by 135 · cited 1×
“Additionally, it has been suggested that the synergic interaction between chitin and other polymers can increase elasticity with respect to the separate components [95].”
BackgroundGrowing and testing mycelium bricks as building insulation materials
Xing, Y., Brewer, M., El-Gharabawy, H. M., Griffith, G. W., & Jones, P. (2018) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/121/2/022032 · Cited by 132 · cited 2×
“2 kJ kg-1 k-1) has also been reported in comparison to commercial materials [38,24].”
BackgroundResultMaddalena, L., Carosio, F., Goméz, J., Saracco, G., & Fina, A. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.03.013 · Cited by 121 · cited 1×
“Layer-by-layer deposition of flame retardants in a chitosan matrix also has been suggested for foams such as polyurethane [68].”
Background(2016) · Applied Engineering in Agriculture · doi:10.13031/aea.32.11830 · Cited by 118
Assessment of Edible Fungi and Films Bio-Based Material Simulating Expanded Polystyrene
Nava, J. A. L., González, J. M., Rúelas-Chácon, X., & Luna, J. A. N. (2015) · Materials and Manufacturing Processes · doi:10.1080/10426914.2015.1070420 · Cited by 104
Interfacial Modification of Hemp Fiber Reinforced Composites Using Fungal and Alkali Treatment
Pickering, K. L., Li, Y., Farrell, R. L., & Lay, M. (2007) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2007.1984 · Cited by 100
Mycelium Fibers as New Resource for Environmental Sustainability
Arifin, Y. H., & Yusuf, Y. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.02.065 · Cited by 93 · cited 1×
“Logically, the higher the fraction of grains in the substrate, the higher the final density is in comparison to protocols that increase the fraction of fibers, husks or wood pulp [39,48].”
BackgroundChitin nanofiber micropatterned flexible substrates for tissue engineering
Hassanzadeh, P., Kharaziha, M., Nikkhah, M., Shin, S. R., Jin, J., He, S., Sun, W., Zhong, C., Dokmeci, M. R., Khademhosseini, A., et al. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20782j · Cited by 84 · cited 3×
“The introduction of chitin nanofibers in chitosan films, gelatin methacryloyl, has been reported to significantly increase Young’s modulus [88,90] for example.”
BackgroundInfluentialIsolation of chitosan from Ganoderma lucidum mushroom for biomedical applications
Ospina, N. M., Álvarez, S. P. O., Sierra, D. M. E., Rojas, D., Ocampo, P. A. Z., & Orozco, C. P. O. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5461-z · Cited by 82
Pyrolysis of chitin biomass: TG–MS analysis and solid char residue characterization
Qiao, Y., Chen, S., Liu, Y., Sun, H., Jia, S., Shi, J., Pedersen, C. M., Wang, Y., & Hou, X. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.005 · Cited by 79
Chitosan phosphate: A new way for production of eco-friendly flame-retardant cotton textiles
El-Tahlawy, K. F. (2008) · Journal of the Textile Institute · doi:10.1080/00405000701584311 · Cited by 70 · cited 1×
“To cite some examples close to mycelium-based biomaterials, it is known for at least a decade that adding chitosan in the phosphorylation process of cotton fabrics enhances flame retardancy [64].”
BackgroundMechanical Properties of Materials
(2007) · Mechanical engineering series · doi:10.1007/978-0-387-68188-7_1 · Cited by 67
Kuzmanović, M., Delva, L., Cardon, L., & Ragaert, K. (2016) · Polymers · doi:10.3390/polym8100355 · Cited by 67 · cited 19×
“(2018) [80] suggest that the mechanical behavior of mycelium is more similar to thermoplastics when hydrophobins are not produced [91].”
BackgroundInfluentialSiyamak, S., Ibrahim, N. A., Abdolmohammadi, S., Yunus, W. M. Z. W., & Rahman, M. Z. A. (2012) · Molecules · doi:10.3390/molecules17021969 · Cited by 66
Processing and Morphology Impacts on Mechanical Properties of Fungal Based Biopolymer Composites
Tudryn, G. J., Smith, L. C., Freitag, J., Bucinell, R., & Schadler, L. S. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-1047-9 · Cited by 65 · cited 2×
“[93] report a positive correlation between flexural stress at yield (as well as bulk flexural modulus) and branch density.”
BackgroundMicrostructuring of Milk-Protein-Coated Flax Fibers
Onwulata, C. I., Cooke, P. H., Harden, J., Liu, Z., Erhan, S. Z., Akin, D. E., & Barton, F. E. (2007) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2007.012 · Cited by 64
Cost modeling and optimization of a manufacturing system for mycelium-based biocomposite parts
Jiang, L., Walczyk, D., McIntyre, G., & Chan, W. K. V. (2016) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2016.07.004 · Cited by 63 · cited 16×
“(2017) [22] show the fabric selected for laminate skins remarkably affects the fungal colonization and consequently the mechanical properties.”
BackgroundResultInfluentialPreparation and properties of α‐chitin‐whisker‐reinforced hyaluronan–gelatin nanocomposite scaffolds
Hariraksapitak, P., & Supaphol, P. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32095 · Cited by 62 · cited 1×
“Specifically, 2% chitin whiskers can increase about 200% of the tensile strength in hyaluronan–gelatin nanocomposite scaffolds [89], whereas introducing 10% chitin nanofibers increases the tensile strength approximately 65% in chitosan films [90].”
BackgroundHu, S., Song, L., Pan, H., & Hu, Y. Z. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2686-7 · Cited by 58 · cited 1×
“Several studies report chitosan as a promising additive in flame retardants, mostly relying on the stabilization of materials at high temperatures [62,63].”
BackgroundCreating Surface Properties Using a Palette of Hydrophobins
Zampieri, F., Wösten, H. A. B., & Scholtmeijer, K. (2010) · Materials · doi:10.3390/ma3094607 · Cited by 58 · cited 1×
“Found in the fungal organism, hydrophobins are involved in several functions related to cell wall morphogenesis, hydrophobicity and substrate adhesion, both in aqueous and aerial environments [78,79].”
BackgroundUsing nature in architecture: Building a living house with mycelium and trees
Vallas, T., & Courard, L. (2017) · Frontiers of Architectural Research · doi:10.1016/j.foar.2017.05.003 · Cited by 57 · cited 1×
“Overall, such low-cost materials are rescued and valorized as primary sources for feedstock flux [33,101].”
BackgroundDevelopment of better insulation bricks by adding mushroom compost wastes
Velasco, P. M., Morales, M. P., Giro, M. A. M., Castelló, M. C. J., & Velasco, L. M. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.05.005 · Cited by 53 · cited 6×
“(2014) [42] correspondingly reported the evidence of a decrease in the thermal conductivity of clay bricks when adding spent mushroom compost (SMC) over 10%.”
BackgroundResultInfluentialA New Approach to Manufacturing Biocomposite Sandwich Structures: Mycelium-Based Cores
Jiang, L., Walczyk, D., McIntyre, G., & Bucinell, R. (2016) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2016-8864 · Cited by 35 · cited 5×
“Ignition temperature has been reported to range between 200 °C and 400 °C but, interestingly, mycelium does not seem to have got intrinsic flame-retardant properties and only acts as a cement instead [17, 32].”
BackgroundInfluentialEvaluation of lignocellulolytic activities of ten fungal species able to degrade poplar wood
Doria, E., Altobelli, E., Girometta, C. E., Nielsen, E., Zhang, T., & Savino, E. (2014) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2014.07.016 · Cited by 33 · cited 1×
“Such a preference is both species-specific and environmentally determined [17,28,29].”
BackgroundSelf-citationDTG and dta studies on typical sugars
Ramos-Sánchez, M. C., Martı́nez, F. J. R., Rodriguez, M. L., Gil, F. J. M., & Martín‐Gil, J. (1988) · Thermochimica Acta · doi:10.1016/0040-6031(88)85216-x · Cited by 32
The mechanical possibilities of mycelium materials
Lelivelt, R. R. (2015) · TU/e Research Portal · Cited by 27
Gaaz, T. S., Sulong, A. B., Ansari, M. N. M., Kadhum, A. A. H., Al‐Amiery, A. A., & Nassir, M. H. (2017) · Materials · doi:10.3390/ma10070777 · Cited by 24
Development and testing of mycelium-based composite materials for shoe sole applications
Silverman, J. (2025) · Library, Museums and Press - UDSpace (University of Delaware) · doi:10.58088/p6q3-s806 · Cited by 21
Girometta, C. E., Zeffiro, A., Malagodi, M., Savino, E., Doria, E., Nielsen, E., Buttafava, A., & Dondi, D. (2017) · Cellulose · doi:10.1007/s10570-017-1395-6 · Cited by 20
Self-citationBacterial Induced Cementation Processes and Mycelium Panel Growth from Agricultural Waste
González, E. M., & Diez, I. G. (2015) · Key engineering materials · doi:10.4028/www.scientific.net/kem.663.42 · Cited by 18 · cited 2×
“Foams are generally regarded as good insulators and MBFs also have been suggested for thermal insulation, such as to produce panels to place in a wall core (Figure 6), and they are the most cited parameter in literature [33].”
BackgroundCellulose-Mycelia foam : novel bio-composite material
Ahmadi, H. (2016) · cIRcle (University of British Columbia) · doi:10.14288/1.0340323 · Cited by 15
Schoberleitner, C., Archodoulaki, V., Koch, T., Lüftl, S., Werderitsch, M., & Kuschnig, G. (2013) · Materials · doi:10.3390/ma6125490 · Cited by 14 · cited 1×
“Mycelium-based materials are fully biodegradable on the condition that neither persistent glue, varnish nor coating was added (particularly in MBSCs), although this treatment is expected to significantly improve physical and mechanical properties [105].”
BackgroundIntroductory Chapter: Multitask Portfolio of Chitin/Chitosan: Biomatrix to Quantum Dot
Dongre, R. S. (2018) · InTech eBooks · doi:10.5772/intechopen.77218 · Cited by 9 · cited 1×
“All told, chitosan seems to be more versatile than chitin for industrial and bioengineering applications; basically, it represents the most important chitin derivative, much easier to obtain and to couple with other molecules as amorphous [60,61].”
BackgroundDTG and DTA studies on sugar derivatives
Martı́nez, F. J. R., Ramos-Sánchez, M. C., Rodrı́guez-Méndez, M. L., Martín‐Gil, J., & Gil, F. J. M. (1988) · Thermochimica Acta · doi:10.1016/0040-6031(88)85218-3 · Cited by 8
Research works printed but not linked: 11
- Sitte, P.; Weiler, E.; Kadereit, H.J.; Bresinsky, A.; Körner, C. Strasburger, Lehrbuch der Botanik für Hochschulen, 35th ed.; Springer: Berlin/Heidelberg, Germany, 2002; ISBN 3-8274-1010-X.
- Callister, W.M.; Rethwisch, D.G. Materials Science and Engineering, 8th ed.; John Wiley & Sons: New York, NY, USA, 2007; ISBN 978-0470419977.
- Schwarze, F.W.M.R.; Engels, J.; Mattheck, C. Fungal Strategies of Wood Decay in Trees; Springer-Verlag: Berlin, Germany, 2013; p. 185, ISBN 3 540 67205 2.
- Drzal, L.T.; Mohanty, A.K.; Misra, M. Bio-composite materials as alternatives to petroleum-based composites for automotive applications. Magnesium 2001, 40, 1-3.
- Travaglini, S.; Noble, J.; Ross, P.G.; Dharan, C.K.H. Mycology matrix composites. In Proceedings of the American Society for Composites, 28th Technical Conference, State College, PA, USA, 9-11 September 2013.
- Santhosh, B.S.; Bhavana, D.R.; Rakesh, M.G. Mycelium composites: An emerging green building material. Int. Res. J. Eng. Technol. 2018, 5, 3066-3068.
- Mouritz, A.P.; Gibson, A.G. Fire Properties of Polymer Composite Materials; Springer Science & Business Media: New York, NY, USA, 2007; p. 401, ISBN 978 1 4020 5356 6.
- Solomon, A.A.; Vinoth, J.; Sudhakar, R.; Hemalatha, G. Inspecting the behavior of insulated concrete form (icf) blocks with polypropylene sheet. Indian J. Sci. Res. 2017, 14, 114-121.
- Stamets, P. (2011). Growing Gourmet and Medicinal Mushrooms, Ten Speed Press. [3rd ed.].
- The Ellen Mc Arthur Foundation (2018, November 27). Towards the Circular Economy. Economic and Business Rationale for an Accelerated Transition. Available online: https://www.ellenmacarthurfoundation.org/assets/downloads/publications/Ellen-MacArthur-Foundation-Towards-the-Circular-Economy-vol.1.pdf.
- Stamets, P., and Chilton, J.S. (1983). The Mushroom Cultivator, Agarikon Press, Olympia. [1st ed.].
Cited by
Elsacker, E., Vandelook, S., Brancart, J., Peeters, E., & De Laet, L. (2019) · PLOS ONE · doi:10.1371/journal.pone.0213954 · Cited by 390
“Every growth parameter variation can result in changes in the material constitution and mechanical properties [3].”
BackgroundMethodInfluentialA comprehensive framework for the production of mycelium-based lignocellulosic composites
Elsacker, E., Vandelook, S., Van Wylick, A., Ruytinx, J., De Laet, L., & Peeters, E. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138431 · Cited by 308
Attias, N., Danai, O., Abitbol, T., Tarazi, E., Ezov, N., Pereman, I., & Grobman, Y. J. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119037 · Cited by 269
Material Function of Mycelium-Based Bio-Composite: A Review
Yang, L., Park, D., & Qin, Z. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.737377 · Cited by 214
Circular economy in biocomposite development: State-of-the-art, challenges and emerging trends
Shanmugam, V., Mensah, R. A., Försth, M., Sas, G., Restás, Á., Addy, C., Xu, Q., Jiang, L., Neisiany, R. E., Singha, S., et al. (2021) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2021.100138 · Cited by 218
Metadata
- Authors
- Girometta, C., Picco, A. M., Baiguera, R. M., Dondi, D., Babbini, S., Cartabia, M., Pellegrini, M., & Savino, E.
- Affiliations
- University of Pavia (IT)
- MOGU S.r.l., Via S. Francesco, 61, 21020 Inarzo, VA, Italy
- Corresponding author
- Picco, Anna Maria
- ORCID
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2019-01-08
- Volume
- 11
- Issue
- 1
- Pages
- 281
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2897497425
- Cited by
- 276
- References
- 81
- Citations by year
- 2026: 39 · 2025: 40 · 2024: 47 · 2023: 53 · 2022: 44 · 2021: 31 · 2020: 14 · 2019: 8
- FWCI
- 10.36
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Foaming and Composites
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Keywords
- sandwich composites, lignocellulosic waste valorization, fungal growth, thermal insulation, sound insulation, mechanical properties, physico-mechanical properties, thermodynamic properties, circular economy, packaging materials, insulating panels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.