Physico-Mechanical and Thermodynamic Properties of Mycelium-Based Biocomposites: A Review
Open accessThe DOI matches its Crossref record; 79 of the 81 references it cites were found in a registry or an index.
Abstract
Reducing the use of non-renewable resources is a key strategy of a circular economy. Mycelium-based foams and sandwich composites are an emerging category of biocomposites relying on the valorization of lignocellulosic wastes and the natural growth of the living fungal organism. While growing, the fungus cements the substrate, which is partially replaced by the tenacious biomass of the fungus itself. The final product can be shaped to produce insulating panels, packaging materials, bricks or new-design objects. Only a few pioneer companies in the world retain a significant know-how, as well as the ability to provide the material characterization. Moreover, several technical details are not revealed due to industrial secrecy. According to the available literature, mycelium-based biocomposites show low density and good insulation properties, both related to acoustic and thermal aspects. Mechanical properties are apparently inferior in comparison to expanded polystyrene (EPS), which is the major synthetic competitor. Nevertheless, mycelium-based composites can display an enormous variability on the basis of: fungal species and strain; substrate composition and structure; and incubation conditions. The aim of the present review is to summarize technical aspects and properties of mycelium-based biocomposites focusing on both actual applications and future perspectives.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 μ m ( H ), 50 μ m ( C , G , K ), 20 μ m ( L ) and 10 μ m ( D ). Reprinted with permission of Apples et al. (2019) [18]. Figure 2. Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 µ m( H ), 50 µ m( C , G , K ), 20 µ m( L ) and 10 µ m( D ). Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/39c84f99e68d4fcaad666827f0ef34d9/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-2.png)
![Figure 3 Diagram showing the production and life cycle of mycelium-based materials. The picture also shows how these materials comply with circular thinking. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].](https://figures.cochat.ai/paper-figures/ed081962da034a53970821618a99adac/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-3.png)
![Figure 4 Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36] . Figure 4. Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36]. Sustainability 2019 , 11 , x FOR PEER REVIEW 6 of 23](https://figures.cochat.ai/paper-figures/7bbd01c3766e4b769bd36b37bcc0dafa/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-4.png)
![Figure 5 Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22]. Figure 5. Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22].](https://figures.cochat.ai/paper-figures/9b2214683ec448b7abf4ab02fe062b6d/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-5.png)
![Figure 6 Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18]. Figure 6. Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/3c96dc8d66814fe48890af52edb92b6d/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-6.png)
![Figure 7 Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31]. Figure 7. Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].](https://figures.cochat.ai/paper-figures/9adbf69f22cb4e4199713ee10c10482a/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-7.png)
![Figure 8 Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. Figure 8. Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/925c988d6c51419fa5ee3fe2d0733743/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-8.png)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“They can be produced into various shapes, which make them an ideal candidate not only for construction but also packaging materials (Girometta et al., 2019).”
From Packaging design for the circular economy: A systematic review (2022) · cites this paper as Girometta et al., 2019
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Chitin and chitosan polymers: Chemistry, solubility and fiber formation
Pillai, C. K. S., Paul, W., & Sharma, C. P. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.001 · Cited by 2,745 · cited 2×
“is, 100% acetylation is not expected in fibrils regarded as chitin [58,59].”
BackgroundAinsworth and Bisbys Dictionary of the Fungi
(2008) · CABI eBooks · doi:10.1079/9780851998268.0000 · Cited by 2,202
Chitosan-based biomaterials for tissue engineering
Croisier, F., & Jérôme, C. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.009 · Cited by 2,149 · cited 1×
“All told, chitosan seems to be more versatile than chitin for industrial and bioengineering applications; basically, it represents the most important chitin derivative, much easier to obtain and to couple with other molecules as amorphous [60,61].”
BackgroundISO (International Organization for Standardization)
Nollet, L. M. L. (2019) · Testing and Analysis of GMO-containing Foods and Feed · doi:10.1201/9781315178592-10 · Cited by 1,895
Production of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687 · cited 1×
“Moreover, the term “fibre” has different meaning in chemistry, materials engineering and botany [2-5].”
BackgroundThe structure and synthesis of the fungal cell wall
Bowman, S. M., & Free, S. J. (2006) · BioEssays · doi:10.1002/bies.20441 · Cited by 1,317 · cited 1×
“Aside from H-bonds, chitin has been reported to be covalently bonded to polysaccharides and thus to peptides [56,57].”
BackgroundOccurrence, Toxicity, and Analysis of Major Mycotoxins in Food
Alshannaq, A., & Yu, J.-H. (2017) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph14060632 · Cited by 1,265 · cited 1×
“According to the BAT, edible and/or medicinal macro-species usually are adopted due to their morphological features and cultivability; notably, they are far from being related to the production of mycotoxins or toxic volatile/soluble metabolites [99,100].”
BackgroundInsulation materials for the building sector: A review and comparative analysis
Schiavoni, S., D׳Alessandro, F., Bianchi, F., & Asdrubali, F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.045 · Cited by 993 · cited 1×
“MBFs, by relying on the BAT, already can be regarded as competitive towards unconventional insulation materials, although a decrease of about 33% in thermal conductivity is required to be fully competitive with commercial materials [50,54].”
BackgroundA review of unconventional sustainable building insulation materials
Asdrubali, F., D'Alessandro, F., & Schiavoni, S. (2015) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2015.05.002 · Cited by 952 · cited 1×
“MBFs, by relying on the BAT, already can be regarded as competitive towards unconventional insulation materials, although a decrease of about 33% in thermal conductivity is required to be fully competitive with commercial materials [50,54].”
Background
Research works printed but not linked: 11
- Sitte, P.; Weiler, E.; Kadereit, H.J.; Bresinsky, A.; Körner, C. Strasburger, Lehrbuch der Botanik für Hochschulen, 35th ed.; Springer: Berlin/Heidelberg, Germany, 2002; ISBN 3-8274-1010-X.
- Callister, W.M.; Rethwisch, D.G. Materials Science and Engineering, 8th ed.; John Wiley & Sons: New York, NY, USA, 2007; ISBN 978-0470419977.
- Schwarze, F.W.M.R.; Engels, J.; Mattheck, C. Fungal Strategies of Wood Decay in Trees; Springer-Verlag: Berlin, Germany, 2013; p. 185, ISBN 3 540 67205 2.
- Drzal, L.T.; Mohanty, A.K.; Misra, M. Bio-composite materials as alternatives to petroleum-based composites for automotive applications. Magnesium 2001, 40, 1-3.
- Travaglini, S.; Noble, J.; Ross, P.G.; Dharan, C.K.H. Mycology matrix composites. In Proceedings of the American Society for Composites, 28th Technical Conference, State College, PA, USA, 9-11 September 2013.
- Santhosh, B.S.; Bhavana, D.R.; Rakesh, M.G. Mycelium composites: An emerging green building material. Int. Res. J. Eng. Technol. 2018, 5, 3066-3068.
- Mouritz, A.P.; Gibson, A.G. Fire Properties of Polymer Composite Materials; Springer Science & Business Media: New York, NY, USA, 2007; p. 401, ISBN 978 1 4020 5356 6.
- Solomon, A.A.; Vinoth, J.; Sudhakar, R.; Hemalatha, G. Inspecting the behavior of insulated concrete form (icf) blocks with polypropylene sheet. Indian J. Sci. Res. 2017, 14, 114-121.
- Stamets, P. (2011). Growing Gourmet and Medicinal Mushrooms, Ten Speed Press. [3rd ed.].
- The Ellen Mc Arthur Foundation (2018, November 27). Towards the Circular Economy. Economic and Business Rationale for an Accelerated Transition. Available online: https://www.ellenmacarthurfoundation.org/assets/downloads/publications/Ellen-MacArthur-Foundation-Towards-the-Circular-Economy-vol.1.pdf.
- Stamets, P., and Chilton, J.S. (1983). The Mushroom Cultivator, Agarikon Press, Olympia. [1st ed.].
Cited by
Items 101–200 of 289
Enrique, C., Castillo-Campohermoso, M. A., Ledezma-Pérez, A. S., Villarreal‐Cárdenas, L., Montoya, L., Bandala, V. M., & Rodríguez-Hernández, A. M. (2023) · Biocatalysis and Agricultural Biotechnology · doi:10.1016/j.bcab.2023.102602 · Cited by 20
Electrical response of fungi to changing moisture content
Phillips, N., Gandía, A., & Adamatzky, A. (2023) · Fungal Biology and Biotechnology · doi:10.1186/s40694-023-00155-0 · Cited by 22
Structural and Chemical Characterization of Mycelium Sheets Developed from Penicillium Camemberti
Rathinamoorthy, R., Bharathi, T. S., Snehaa, M., & Swetha, C. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02941-8 · Cited by 22
“The ‘hyphae’ part of mycelia has a unique way of growth that helps to form a composite with several other materials like sawdust, straw substrates, and bagasse [ 22, 23 ].”
BackgroundEnvironmental impacts of mycelium-based bio-composite construction materials
Bagheriehnajjar, G., Yousefpour, H., & Rahimnejad, M. (2024) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-023-05447-x · Cited by 21
“…and acoustic insulation materials (Pelletier et al. 2013, 2017; Jones et al. 2018; Xing et al. 2018; Girometta et al. 2019), bricks (Kishan et al. 2018; Girometta et al. 2019; Ongpeng et al. 2020), sandwich panels (Jiang et al. 2017) and even load-bearing structural elements (Heisel et al. 2017a).”
Upscaling Natural Materials in Construction: Earthen, Fast-Growing, and Living Materials
Carcassi, O. B., Salierno, R., Falcinelli, P. A., Paoletti, I. M., & Ben-Alon, L. (2024) · Sustainability · doi:10.3390/su16187926 · Cited by 20
Characterization of Mycelium Biocomposites under Simulated Weathering Conditions
Schultz, N. K., Fazli, A., Piros, S., Barranco-Origel, Y., Cruz, P. D., & Schneider, Y. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c01192 · Cited by 19
Mycelium-based biocomposites: synthesis and applications
Sharma, M., Verma, S., Chauhan, G., Arya, M., & Kumari, A. (2024) · Environmental Sustainability · doi:10.1007/s42398-024-00305-z · Cited by 25
“Fungal mycelium is a polymeric composite material made up of natural polymers such as mannoproteins, hydrophob-ins, chitin, glucans, and other protein polymers (Holt et al. 2012; Jones et al. 2017; Girometta et al. 2019).”
InfluentialTensile Properties of 3D-Printed Jute-Reinforced Composites via Stereolithography
Rahman, M., Mohiv, A., Tauhiduzzaman, M., Kharshiduzzaman, M., Khan, M. E., Haque, M. R., & Bhuiyan, M. S. (2024) · Applied Mechanics · doi:10.3390/applmech5040043 · Cited by 19
Dukare, A. S., Yadav, R., Kautkar, S., Kuppusamy, P., Sharma, K., Shaikh, A., Pawar, A., Gadade, A., Vigneshwaran, N., Saxena, S., et al. (2024) · Waste Management Bulletin · doi:10.1016/j.wmb.2024.11.011 · Cited by 19
Unleashing the potential of white-rot fungi mycelium for functional biomaterials development
Singh, S., Singh, N. P., Agrawal, S., & Kumar, A. (2025) · Discover Materials · doi:10.1007/s43939-025-00288-6 · Cited by 20
“Thus, cellulose, lignin, or both can be found in the majority of the substrates listed, Fungal organisms in particular overgrow and metabolize these substrates [41].”
InfluentialSubramanian, V., Adler, M. J., Benyamin, M. S., Pullen, R. M., Servinsky, M. D., Kozlowski, M. T., & Decker, S. R. (2025) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-025-02712-8 · Cited by 21
“There are several excellent reviews covering various aspects of the life cycle of mycelia building materials, from biomanufac-turing to application [2, 291, 303–306].”
Jain, A., Sarsaiya, S., Gong, Q., Wu, Q., & Shi, J. (2024) · Environment Development and Sustainability · doi:10.1007/s10668-024-05734-8 · Cited by 21
“Biodegradable plastics can originate from animals, plants, or microbes, and food waste-based biopolymers provide an eco-friendly alternative to durable food packaging (Girometta et al., 2019).”
Luksta, I., Bohvalovs, Ģ., Bažbauers, G., Spalviņš, K., Blumberga, A., & Blumberga, D. (2021) · Environmental and Climate Technologies · doi:10.2478/rtuect-2021-0080 · Cited by 16
Wang, Y., Hausner, G., Rout, P. R., & Yuan, Q. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.145206 · Cited by 19
Evaluation of mycelium composite materials produced by five Patagonian fungal species
Aquino, M., Rugolo, M., Robledo, G., & Kuhar, F. (2022) · Maderas Ciencia y tecnología · doi:10.4067/s0718-221x2022000100435 · Cited by 16
Mining logical circuits in fungi
Roberts, N., & Adamatzky, A. (2022) · Scientific Reports · doi:10.1038/s41598-022-20080-3 · Cited by 28
“They are already used in acoustic [40, 15, 41] and thermal [52, 51, 19, 14, 49, 8] insulation panels and cladding, materials for packaging [21, 45, 36] and wearables [2, 44, 26, 4, 24].”
BackgroundMycelium-based bioproducts: A novel material for a sustainable economy – A comprehensive review
Khan, R. (2025) · The Microbe · doi:10.1016/j.microb.2025.100439 · Cited by 15
A Review of Mycelium-Based Composites in Architectural and Design Applications
Lewandowska, A., Sydor, M., & Bonenberg, A. (2025) · Sustainability · doi:10.3390/su172411350 · Cited by 15
“MBCs are currently being developed for packaging [5], industrial artifacts [6], furniture and art use [3], building materials [7,8], textiles [9], acoustic tiles [10], and thermal insulation materials [11].”
Mycelium-wood composites as a circular material for building insulation
Candido, A., Amiri, A., Junnila, S., & Pittau, F. (2024) · Frontiers in Sustainable Cities · doi:10.3389/frsc.2024.1412247 · Cited by 19
Aiduang, W., Jinanukul, P., Thamjaree, W., Kiatsiriroat, T., Waroonkun, T., & Lumyong, S. (2024) · Biomimetics · doi:10.3390/biomimetics9090549 · Cited by 15
Tangled Tales of Mycelium and Architecture: Learning From Failure
McGaw, J., Andrianopoulos, A., & Liuti, A. (2022) · Frontiers in Built Environment · doi:10.3389/fbuil.2022.805292 · Cited by 14
Bagheriehnajjar, G., Yousefpour, H., & Rahimnejad, M. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133346 · Cited by 14
Sierra, L. A. B., Mendes-Pereira, T., García, G. J. Y., Werkhaizer, C. Q., de Rezende, J. B., Rodrigues, T. A. B., Badotti, F., Cardoso, E. S. D. C., da Costa, A. M., Uetanabaro, A. P. T., et al. (2023) · PeerJ Materials Science · doi:10.7717/peerj-matsci.31 · Cited by 17
“Depending on the interaction of the physical-chemical environment and the set of hyphae, called mycelium, which corresponds to the fungal body, it can be long or diffuse, short or branched, or both (Loguercio-Leite, 2004; Girometta et al., 2019).”
BackgroundMethodInfluentialGandía, A., & Adamatzky, A. (2023) · Biosystems · doi:10.1016/j.biosystems.2023.105106 · Cited by 13
Klemm, S., Pohl, C., Bauer, L. J., Mantouvalou, I., Simon, U., & Fleck, C. (2024) · PLoS ONE · doi:10.1371/journal.pone.0304614 · Cited by 14
“The most abundant polymer in the fungal cell wall is glucan (30–80% of the cell wall mass [20,21]). β -1,3-glucan is covalently bound to chitin [22].”
BackgroundInfrequent Current and Potential Applications of Mushrooms
Elkhateeb, W. A., Elnahas, M. O., & Daba, G. M. (2021) · CRC Press eBooks · doi:10.1201/9781003096818-7 · Cited by 26
Pleurotus ostreatus and a novel fungal composite: Development and bioremediation of plastic wastes
Ratuchne, A., Lonardoni, E. A., Bueno, C. E., Reis, G. F., Rezende, M. I., Urbano, A., Biz, G., Almeida, R. S., & Panagio, L. A. (2023) · Resources Conservation & Recycling Advances · doi:10.1016/j.rcradv.2023.200167 · Cited by 18
Feijóo-Vivas, K., Bermúdez-Puga, S. A., Rebolledo, H., Figueroa, J. M., Zamora, P., & Naranjo, L. (2021) · Bionatura · doi:10.21931/rb/2021.06.01.29 · Cited by 16
Derme, T., Schwarze, F. W. M. R., & Dillenburger, B. (2024) · Global Challenges · doi:10.1002/gch2.202300197 · Cited by 12
Assessing the Conformity of Mycelium Biocomposites for Ecological Insulation Solutions
Irbe, I., Kirpļuks, M., Kampuss, M., Andze, L., Milbreta, U., & Fiļipova, I. (2024) · Materials · doi:10.3390/ma17246111 · Cited by 11
“MBs can be engineered with varying properties, depending on factors such as the fungal species and strains used, the substrate composition, its structure and particle sizes, as well as the incubation conditions [15].”
Ahmed, A., Narayanan, R. A., & Veni, A. R. (2019) · Journal of Applied Microbiology · doi:10.1111/jam.14539 · Cited by 11
“Some evidence in the literature also exists on the presence of pyruvate itself in EPS.”
BackgroundInfluentialTowards carbon-neutral built environment: A critical review of mycelium-based composites
Jin, Y., De, G., Wilson, N., Qin, Z., & Dong, B. (2025) · Energy and Built Environment · doi:10.1016/j.enbenv.2025.01.004 · Cited by 21
Babenko, M., Klitou, T., Klumbytė, E., & Fokaides, P. A. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e04572 · Cited by 10
Daâssi, D., Alhumairi, A. M., Mellah, B., Fdhil, N., Baccar, N., & Chamkha, M. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05978-y · Cited by 10
“Mycelium’s biodegradability has been mentioned in several papers [27, 28], but no experimental study has been conducted to confirm this claim.”
A Comparative Study on Biodegradable Packaging Materials: Current Status and Future Prospects
Rao, A. S., Nair, A., More, S. S., Roy, A., More, V. S., & Anantharaju, K. S. (2021) · Springer eBooks · doi:10.1007/978-981-16-0045-6_27 · Cited by 10
Investigation of properties and applications of cellulose-mycelium foam
Ahmadi, H., O’Keefe, A., Bilek, M. A., Korehei, R., Kapu, N. S., Martinez, M. D., & Olson, J. A. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07302-9 · Cited by 13
“A combination of cellulose fiber with fungal mycelium can generate wide ranges of biomaterials, from soft, flexible nanostructured composites, to hard, lightweight skeletal elements that can self-assemble [17].”
BackgroundFlexible Hollow‐Structured Reinforced Mycelium Insulation Material and its Performance
Zhou, T., Bai, Y., Zhang, H., Ma, B., Yuan, J., Fan, X., Gao, W., & Xu, J. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202500315 · Cited by 9
Mushrooms in climate change mitigation: a comprehensive review
Karunarathna, S. C., Tibpromma, S., Karunarathna, B., Dai, D.-Q., Kumla, J., Lu, W., Perera, R. H., Wang, M., Priyadarshani, T. D. C., Hapuarachchi, K. K., et al. (2026) · Frontiers in Microbiology · doi:10.3389/fmicb.2025.1727022 · Cited by 12
“They are the producers of insecticidal and antifungal bioactive compounds, particularly, ganoderic acids and pleurotin and present eco-friendly substitutes for chemical pesticides (Girometta et al., 2019; Nguyen et al., 2022).”
On electrical gates on fungal colony
Beasley, A. E., Ayres, P., Tegelaar, M., Tsompanas, M., & Adamatzky, A. (2021) · Biosystems · doi:10.1016/j.biosystems.2021.104507 · Cited by 12
Vaišis, V., Chlebnikovas, A., & Jasevičius, R. (2023) · Applied Sciences · doi:10.3390/app13031703 · Cited by 9
Design studies and applications of mycelium biocomposites in architecture
Kırdök, O., Altun, D. A., Dahy, H., Strobel, L., Tuna, E. E. H., Köktürk, G., Çakır, Ö. A., Tokuç, A., Özkaban, F. A., & Şendemir, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-821053-6.00004-7 · Cited by 9
Ghazvinian, A., & Gürsoy, B. (2022) · Springer eBooks · doi:10.1007/978-981-19-1000-5_8 · Cited by 9
The Sound Absorption Performance of Laser-Sintered Composite Biomimetic Wood Porous Structures
Zou, L., Zhang, A., Liu, Z., Du, P., & Guo, Y. (2024) · Polymers · doi:10.3390/polym16233290 · Cited by 9
“Girometta et al. [24] showed that these materials not only have excellent thermal insulation properties but also exhibit good acoustic performance.”
Hu, M., & Cao, X. (2025) · Materials · doi:10.3390/ma18061225 · Cited by 8
“For example, the SS showed a characteristic peak for the stretching vibration of C-O groups from polysaccharides at 1090 cm − 1 and the glucan β -anomer C-H bending stretching vibration of cellulose at 880 cm − 1 [17,48,52].”
Hajam, M. E., Sun, W., Hafez, I., Howell, C., & Tajvidi, M. (2025) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2025.109223 · Cited by 8
Williams, T. S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-821074-1.00014-1 · Cited by 10
Effective Structural Parametric Form in Architecture Using Mycelium Bio-Composites
Gavriilidis, E. T., Voutetaki, M. Ε., & Giouzepas, D. G. (2024) · Architecture · doi:10.3390/architecture4030037 · Cited by 8
Izan, N. L. M., Bahrin, E. K., Yusoff, M. Z. M., Simarani, K., Sharip, N. S., & Ariffin, H. (2024) · Biocatalysis and Agricultural Biotechnology · doi:10.1016/j.bcab.2024.103436 · Cited by 7
“Growing Design”: The Role of Mycelium-Based Materials in Interior and Furniture Design
Rashdan, W., & Ashour, A. F. (2024) · The International Journal of Designed Objects · doi:10.18848/2325-1379/cgp/v18i02/37-62 · Cited by 8
Pan-genomics of fungi and its applications
Kato, R. B., Jaiswal, A. K., Tiwari, S., Barh, D., Azevedo, V., & Goés‐Neto, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817076-2.00012-3 · Cited by 7
Study of the Use of Sawdust and Mycelium Composite as a Substitute of EPS
Miralbés, R., Ranz, D., & Zouzias, D. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-3-030-70566-4_12 · Cited by 7
An experimental study on production opportunities of biocomposite by using fungal mycelium
Sağlam, S. S., & Özgünler, S. A. (2022) · Journal of Design for Resilience in Architecture and Planning · doi:10.47818/drarch.2022.v3i2056 · Cited by 7
Ruiz, A., Cogdell, C., Mak, J., Rowe, A., Wan, S., & Saponara, V. L. (2024) · Research Directions Biotechnology Design · doi:10.1017/btd.2024.8 · Cited by 6
“…of our MBCs appear very competitive with respect to those reported in the MBCs ’ review literature (e.g. Attias et al., 2023; Jones et al., 2020; Girometta et al., 2019), and with those of some synthetic materials of the residential and commercial construction industries, that have a…”
ResultEngineering functional mycelium-based composites: Innovations in thermal and acoustic insulation
George, K., Rodríguez-Grau, G., Manikandan, V. S., Molina, P., Sancy, M., & Thirumurugan, A. (2026) · Composites Part B Engineering · doi:10.1016/j.compositesb.2026.113470 · Cited by 6
Qiu, Y., Hausner, G., & Yuan, Q. (2025) · Materials Today Sustainability · doi:10.1016/j.mtsust.2025.101101 · Cited by 6
Fungi-based Biomimetic Approach to Address Plastic Pollution: A Developing Nation's PerspectivePreprint
Kundanati, L. (2022) · Preprints.org · doi:10.20944/preprints202209.0255.v1 · Cited by 6
Quality Characteristics of Low-Fat Sausage Using Cultured Mushroom Mycelium
Oh, Y.-N., & Kim, H.-Y. (2025) · Food Science of Animal Resources · doi:10.5851/kosfa.2025.e23 · Cited by 5
“Girometta et al. (2019) reported that the moisture content of mushroom mycelium-based composites was 59%–80% (based on wet mass), which was similar to our results.”
Production of Mycelium Mats for Textile Applications
Romero-Cedillo, R. K., Robledo-Leal, E., Aguilar-Marcelino, L., Acosta-Urdapilleta, M. D. L., & Téllez‐Téllez, M. (2025) · Journal of Fungi · doi:10.3390/jof11100700 · Cited by 5
“…fungal mycelia are mycelium-based foams (MBFs), which are grown on agricultural waste; mycelium-based sandwich composites (MBSCs), in which outer layers are made that surround a central core using natural fibres [8]; and pure mycelial materials (PMMs), which are composed solely of mycelium [9].”
Özkan, M., & Güzelci, O. Z. (2025) · Biomimetics · doi:10.3390/biomimetics10110729 · Cited by 5
The impacts of compaction on the properties of mycelium-based materials
Qiu, Y., Hausner, G., & Yuan, Q. (2025) · Discover Materials · doi:10.1007/s43939-025-00493-3 · Cited by 5
“Although some previous studies showed that the dry densities of MBMs do not always positively correlate with Young’s modulus [6], for all the protocols in this study, compacted samples had higher density and Young’s modulus than those without compaction.”
Gray, K., Edwards, H., Doan, A. G., Huso, W. D., Lee, J., Pan, W., Bolima, N., Morse, M. E., Yoda, S., Gautam, I., et al. (2024) · Fungal Biology and Biotechnology · doi:10.1186/s40694-024-00191-4 · Cited by 5
“In both cases, the specific species or strain of the fungus used contributes significantly to the resultant material’s mechanical properties [9, 11].”
Mining Logical Circuits in Fungi
Roberts, N., & Adamatzky, A. (2023) · Emergence, complexity and computation · doi:10.1007/978-3-031-38336-6_21 · Cited by 6
Ashraf, M. U., Hzami, A., Alghamri, R., Khattab, T., & Abu-Rayash, A. (2026) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2026.2665914 · Cited by 4
MycoCurva: stay-in-place fabric formworks for curved veneer-reinforced mycelium building components
Özdemir, E., Rossi, A., & Eversmann, P. (2025) · Architecture Structures and Construction · doi:10.1007/s44150-025-00134-6 · Cited by 4
Liu, Y., Dai, Y., Xia, X., & Dong, M. (2026) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.70434 · Cited by 6
KUTBAY, N. H., Yavuzcan, H. G., & Aktaş, S. (2021) · Journal of Polytechnic · doi:10.2339/politeknik.943738 · Cited by 4
", & SHOKRKAR, H. (2023) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2023.57.10 · Cited by 4
Biomaterial obtenido a partir de micelio de hongo (ganoderma lucidum) y residuos agrícolas
Susel, G. D. E., Hernández-Domínguez, E. M., Fernández, A. G. E., Álvarez-Cervantes, J., Medellín, L. D. R., & Mendoza, B. M. (2021) · South Florida Journal of Development · doi:10.46932/sfjdv2n3-065 · Cited by 10
“…baja densidad se considera un factor importante en la competitividad de las MBF. Junto a la conveniencia de un peso reducido para el envasado, la densidad afecta a otras propiedades importantes del material, tanto desde el punto de vista físico-mecánico como termodinámico (Girometta et al., 2019).”
BackgroundMining Logical Circuits in FungiPreprint
Roberts, N., & Adamatzky, A. (2021) · Research Square · doi:10.21203/rs.3.rs-811919/v1 · Cited by 7
Khyaju, S., Hyde, K. D., Khongphinitbunjong, K., Duangphet, S., Aiduang, W., & Luangharn, T. (2025) · Journal of Fungi · doi:10.3390/jof11120826 · Cited by 3
“The MMBs produced from these species exhibited physical and chemical properties comparable to those reported in other fungal composites [64].”
Bhaskar, R., Rutledge, T. K., Trangone, K., & Latimore, O. (2026) · Polymers · doi:10.3390/polym18030400 · Cited by 4
“In contrast, the relationships among MBC density, elastic modulus, and compressive strength are not necessarily correlated [32,56] or generalizable, which was also the case in this study.”
Harnessing Fungal Biowelding for Constructing Mycelium‐Engineered Materials
Bai, X. B., Niu, X. S., & Zhao Qin, A. (2026) · Advanced Engineering Materials · doi:10.1002/adem.202501759 · Cited by 4
Comparative Analysis of Mycelium Biocomposites as Potential Next-Generation Green Building Materials
Kırdök, O., Toker, S. K., Kıvrak, O., Altun, D. A., & Hameş, E. E. (2024) · Mantar dergisi · doi:10.30708/mantar.1569974 · Cited by 3
Vertua, C., Procaccini, G., Pugliese, I., Rosana, G., Monticelli, C., & Zanelli, A. (2025) · Sustainable development · doi:10.5772/intechopen.1010088 · Cited by 3
Чащилов, Д. В., Minakov, D. V., Минакова, А. А., & Бычин, Н. В. (2022) · Южно-Сибирский научный вестник · doi:10.25699/sssb.2022.46.6.027 · Cited by 4
Design, Cultivation, and Acoustic Analysis of a Building-Sized Mycelium Sculpture
Dessi-Olive, J., Hsu, T. Y., & Oliyan, O. (2024) · Research Directions Biotechnology Design · doi:10.1017/btd.2024.5 · Cited by 3
“Different substrates and fungal strains can be combined to make biocomposites with varying properties of structural integrity, density, conductivity, moisture resistance and visual quality (Elsacker et al., 2019; Girometta et al., 2019; Appels et al. 2019; Sydor et al. 2022).”
BackgroundPei, Z., Rahman, A. M., Shaw, B. D., & Bedsole, C. O. (2024) · Bioengineering · doi:10.3390/bioengineering11080840 · Cited by 3
“The main advantages of biomass–fungi composite materials include their biodegradability and less negative impact on the environment in comparison to petroleum-derived plastic materials [6] and their good thermal and sound insulation [7,8].”
BackgroundSecuring Healthy Circular Material Flows In The Built Environment
Geldermans, B. (2020) · Architecture and the Built Environment · doi:10.59490/abe.2020.06.5038 · Cited by 4
10th Hardwood Conference Proceedings
Németh, R., Hansmann, C., Rademacher, P., Bak, M., & Báder, M. (2022) · Hardwood conference proceedings · doi:10.35511/978-963-334-446-0 · Cited by 4
Living Mycelium Composites Discern Weights via Patterns of the Electrical Activity
Adamatzky, A., & Gandía, A. (2023) · Emergence, complexity and computation · doi:10.1007/978-3-031-38336-6_6 · Cited by 4
Introduction to Naturally‐Based (Bio‐) Adhesives
Dunky, M. (2023) · Wiley eBooks · doi:10.1002/9781394175406.ch1 · Cited by 4
Krsmanović, N., Mišković, J., Novaković, A. R., & Karaman, M. A. (2024) · Journal on Processing and Energy in Agriculture · doi:10.5937/jpea28-49739 · Cited by 2
“…mycelium growth is usually a mixture consisting of different lignocellulosic agricultural crop waste such as cotton, corn, wheat, and hemp, flax residues (Jiang et al., 2017; Appels et al., 2019; Girometta et al., 2019) and fibers, sawdust, and wood chips as organic materials (Jones et al., 2020).”
BackgroundBiofoams with untapped enzymatic potential produced from beer bagasse by indigenous fungal strains
Pranzoni, C. A., Bonilla, J., Carrillo, Á., López-Vidal, M., Aguilera, L., Ochoa, N. A., & Kurina‐Sanz, M. (2024) · Bioresource Technology · doi:10.1016/j.biortech.2024.131037 · Cited by 2
Reshma, H., Lincya, J., Nandhini, B., Sundarapandianb, M., & Balasubramaniana, S. (2025) · Journal of Current Research in Food Science · doi:10.22271/foodsci.2025.v6.i1f.232 · Cited by 2
Exposito, F. O., & Rovers, C. A. (2025) · Journal of Visualized Experiments · doi:10.3791/68375 · Cited by 2
Strain, substrate, and matrix selection for controlled growth of wood-fungi
Hofer, S., Nussbaum, N., Fischer, P., & Rühs, P. A. (2025) · Soft Matter · doi:10.1039/d5sm00749f · Cited by 2
“Similar to the literature values, 10,14 the compressive strength of the colonized foam was in the range of 10 to 30 kPa.”
Nejati, M., Zha, L., Mensah, R. A., Das, O., Capezza, A. J., & Jiménez‐Quero, A. (2025) · Materials Today Sustainability · doi:10.1016/j.mtsust.2025.101295 · Cited by 2
“This process imparts new properties to the original materials, which can be tailored by adjusting growth conditions and substrate specificity [5].”
Built with mycelium: A comparative review of architectural case studies (2014‒2025)
Berčič, T., Stavrev, M., & Mahovič, A. (2026) · Journal of Building Engineering · doi:10.1016/j.jobe.2026.115686 · Cited by 3
Damthip, T., Hama, N.-A., Khongnakhon, S., Yanwisetpakdee, B., Ruamcharoen, P., & Chanlert, P. (2026) · Applied Acoustics · doi:10.1016/j.apacoust.2026.111308 · Cited by 3
Sustainable Sound Absorption: A Critical Review of Material Innovation and Geometry-Driven Design
Tayari, F., Silva, R., Godinho, B., Pinto, P., Cardoso, I., Brilhante, T., Freitas, V., Ribeiro, R., Ferreira, A. R., & Gama, N. (2026) · Polymers · doi:10.3390/polym18121522 · Cited by 3
“Mycelium-based composites represent an emerging category of bio-derived acoustic materials where mycelium acts as a natural adhesive [107,108], converting loose lignocellulosic materials into cohesive and porous materials [106].”
López-Forniés, I., Mallada, R. A., Ejarque-Ortiz, A., & Sediles, M. A. M. (2022) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-15928-2_2 · Cited by 2
Sharifi, N., Sho, Y., Park, D., Noone, M., & Memarandadgar, K. (2023) · Sustainable development goals series · doi:10.1007/978-3-031-36554-6_36 · Cited by 2
Fungi Potential Applications in Sustainable Packaging
Azelee, N. I. W., Yusoff, I. M., Man, R. C., Shaarani, S. M., Mustafa, R. R., & Rahman, N. H. A. (2024) · Springer eBooks · doi:10.1007/978-981-97-4113-7_2 · Cited by 2
Garhwal, A., Sharma, S., & Roy, A. B. D. (2024) · Canadian Journal of Civil Engineering · doi:10.1139/cjce-2024-0128 · Cited by 2
Чащилов, Д. В., Чащилова, В. Д., & Bychin, N. V. (2024) · Южно-Сибирский научный вестник · doi:10.25699/sssb.2024.58.6.045 · Cited by 2
Quirion, T., & Ouellet‐Plamondon, C. (2025) · Rilem bookseries · doi:10.1007/978-3-031-92777-5_36 · Cited by 2
Production of Bioresins from Fungal Mycelia
Jiang, L. (2022) · Springer eBooks · doi:10.1007/978-981-19-1000-5_13 · Cited by 2
An overview-is mycelium composite foam can be used as a food packaging
Tajuddin, R. Y., Asfar, M., & Dirpan, A. (2023) · AIP conference proceedings · doi:10.1063/5.0118660 · Cited by 2
Piazza, S. D., Cecchi, G., Rosa, E., & Zotti, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819990-9.00061-5 · Cited by 2
Fungal biocomposites production from packaging industry residue: PET-coated SBS paperboard
Souza, N. F., Chaves, M. B., Silva, D. A. K., Riani, J. C., & Wisbeck, E. (2025) · Polímeros · doi:10.1590/0104-1428.20240038 · Cited by 1
Metadata
- Authors
- Girometta, C., Picco, A. M., Baiguera, R. M., Dondi, D., Babbini, S., Cartabia, M., Pellegrini, M., & Savino, E.
- Affiliations
- University of Pavia (IT)
- MOGU S.r.l., Via S. Francesco, 61, 21020 Inarzo, VA, Italy
- Corresponding author
- Picco, Anna Maria
- ORCID
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2019-01-08
- Volume
- 11
- Issue
- 1
- Pages
- 281
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2897497425
- Cited by
- 276
- References
- 81
- Citations by year
- 2026: 39 · 2025: 40 · 2024: 47 · 2023: 53 · 2022: 44 · 2021: 31 · 2020: 14 · 2019: 8
- FWCI
- 10.36
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Foaming and Composites
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Keywords
- sandwich composites, lignocellulosic waste valorization, fungal growth, thermal insulation, sound insulation, mechanical properties, physico-mechanical properties, thermodynamic properties, circular economy, packaging materials, insulating panels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.