Physico-Mechanical and Thermodynamic Properties of Mycelium-Based Biocomposites: A Review
Open accessThe DOI matches its Crossref record; 79 of the 81 references it cites were found in a registry or an index.
Abstract
Reducing the use of non-renewable resources is a key strategy of a circular economy. Mycelium-based foams and sandwich composites are an emerging category of biocomposites relying on the valorization of lignocellulosic wastes and the natural growth of the living fungal organism. While growing, the fungus cements the substrate, which is partially replaced by the tenacious biomass of the fungus itself. The final product can be shaped to produce insulating panels, packaging materials, bricks or new-design objects. Only a few pioneer companies in the world retain a significant know-how, as well as the ability to provide the material characterization. Moreover, several technical details are not revealed due to industrial secrecy. According to the available literature, mycelium-based biocomposites show low density and good insulation properties, both related to acoustic and thermal aspects. Mechanical properties are apparently inferior in comparison to expanded polystyrene (EPS), which is the major synthetic competitor. Nevertheless, mycelium-based composites can display an enormous variability on the basis of: fungal species and strain; substrate composition and structure; and incubation conditions. The aim of the present review is to summarize technical aspects and properties of mycelium-based biocomposites focusing on both actual applications and future perspectives.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 μ m ( H ), 50 μ m ( C , G , K ), 20 μ m ( L ) and 10 μ m ( D ). Reprinted with permission of Apples et al. (2019) [18]. Figure 2. Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 µ m( H ), 50 µ m( C , G , K ), 20 µ m( L ) and 10 µ m( D ). Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/39c84f99e68d4fcaad666827f0ef34d9/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-2.png)
![Figure 3 Diagram showing the production and life cycle of mycelium-based materials. The picture also shows how these materials comply with circular thinking. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].](https://figures.cochat.ai/paper-figures/ed081962da034a53970821618a99adac/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-3.png)
![Figure 4 Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36] . Figure 4. Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36]. Sustainability 2019 , 11 , x FOR PEER REVIEW 6 of 23](https://figures.cochat.ai/paper-figures/7bbd01c3766e4b769bd36b37bcc0dafa/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-4.png)
![Figure 5 Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22]. Figure 5. Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22].](https://figures.cochat.ai/paper-figures/9b2214683ec448b7abf4ab02fe062b6d/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-5.png)
![Figure 6 Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18]. Figure 6. Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/3c96dc8d66814fe48890af52edb92b6d/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-6.png)
![Figure 7 Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31]. Figure 7. Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].](https://figures.cochat.ai/paper-figures/9adbf69f22cb4e4199713ee10c10482a/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-7.png)
![Figure 8 Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. Figure 8. Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. (2019) [18].](https://figures.cochat.ai/paper-figures/925c988d6c51419fa5ee3fe2d0733743/physico-mechanical-and-thermodynamic-properties-of-mycelium-based-biocomposites-figure-8.png)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“They can be produced into various shapes, which make them an ideal candidate not only for construction but also packaging materials (Girometta et al., 2019).”
From Packaging design for the circular economy: A systematic review (2022) · cites this paper as Girometta et al., 2019
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Chitin and chitosan polymers: Chemistry, solubility and fiber formation
Pillai, C. K. S., Paul, W., & Sharma, C. P. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.001 · Cited by 2,745 · cited 2×
“is, 100% acetylation is not expected in fibrils regarded as chitin [58,59].”
BackgroundAinsworth and Bisbys Dictionary of the Fungi
(2008) · CABI eBooks · doi:10.1079/9780851998268.0000 · Cited by 2,202
Chitosan-based biomaterials for tissue engineering
Croisier, F., & Jérôme, C. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.009 · Cited by 2,149 · cited 1×
“All told, chitosan seems to be more versatile than chitin for industrial and bioengineering applications; basically, it represents the most important chitin derivative, much easier to obtain and to couple with other molecules as amorphous [60,61].”
BackgroundISO (International Organization for Standardization)
Nollet, L. M. L. (2019) · Testing and Analysis of GMO-containing Foods and Feed · doi:10.1201/9781315178592-10 · Cited by 1,895
Production of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687 · cited 1×
“Moreover, the term “fibre” has different meaning in chemistry, materials engineering and botany [2-5].”
BackgroundThe structure and synthesis of the fungal cell wall
Bowman, S. M., & Free, S. J. (2006) · BioEssays · doi:10.1002/bies.20441 · Cited by 1,317 · cited 1×
“Aside from H-bonds, chitin has been reported to be covalently bonded to polysaccharides and thus to peptides [56,57].”
BackgroundOccurrence, Toxicity, and Analysis of Major Mycotoxins in Food
Alshannaq, A., & Yu, J.-H. (2017) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph14060632 · Cited by 1,265 · cited 1×
“According to the BAT, edible and/or medicinal macro-species usually are adopted due to their morphological features and cultivability; notably, they are far from being related to the production of mycotoxins or toxic volatile/soluble metabolites [99,100].”
BackgroundInsulation materials for the building sector: A review and comparative analysis
Schiavoni, S., D׳Alessandro, F., Bianchi, F., & Asdrubali, F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.045 · Cited by 993 · cited 1×
“MBFs, by relying on the BAT, already can be regarded as competitive towards unconventional insulation materials, although a decrease of about 33% in thermal conductivity is required to be fully competitive with commercial materials [50,54].”
BackgroundA review of unconventional sustainable building insulation materials
Asdrubali, F., D'Alessandro, F., & Schiavoni, S. (2015) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2015.05.002 · Cited by 952 · cited 1×
“MBFs, by relying on the BAT, already can be regarded as competitive towards unconventional insulation materials, although a decrease of about 33% in thermal conductivity is required to be fully competitive with commercial materials [50,54].”
Background
Research works printed but not linked: 11
- Sitte, P.; Weiler, E.; Kadereit, H.J.; Bresinsky, A.; Körner, C. Strasburger, Lehrbuch der Botanik für Hochschulen, 35th ed.; Springer: Berlin/Heidelberg, Germany, 2002; ISBN 3-8274-1010-X.
- Callister, W.M.; Rethwisch, D.G. Materials Science and Engineering, 8th ed.; John Wiley & Sons: New York, NY, USA, 2007; ISBN 978-0470419977.
- Schwarze, F.W.M.R.; Engels, J.; Mattheck, C. Fungal Strategies of Wood Decay in Trees; Springer-Verlag: Berlin, Germany, 2013; p. 185, ISBN 3 540 67205 2.
- Drzal, L.T.; Mohanty, A.K.; Misra, M. Bio-composite materials as alternatives to petroleum-based composites for automotive applications. Magnesium 2001, 40, 1-3.
- Travaglini, S.; Noble, J.; Ross, P.G.; Dharan, C.K.H. Mycology matrix composites. In Proceedings of the American Society for Composites, 28th Technical Conference, State College, PA, USA, 9-11 September 2013.
- Santhosh, B.S.; Bhavana, D.R.; Rakesh, M.G. Mycelium composites: An emerging green building material. Int. Res. J. Eng. Technol. 2018, 5, 3066-3068.
- Mouritz, A.P.; Gibson, A.G. Fire Properties of Polymer Composite Materials; Springer Science & Business Media: New York, NY, USA, 2007; p. 401, ISBN 978 1 4020 5356 6.
- Solomon, A.A.; Vinoth, J.; Sudhakar, R.; Hemalatha, G. Inspecting the behavior of insulated concrete form (icf) blocks with polypropylene sheet. Indian J. Sci. Res. 2017, 14, 114-121.
- Stamets, P. (2011). Growing Gourmet and Medicinal Mushrooms, Ten Speed Press. [3rd ed.].
- The Ellen Mc Arthur Foundation (2018, November 27). Towards the Circular Economy. Economic and Business Rationale for an Accelerated Transition. Available online: https://www.ellenmacarthurfoundation.org/assets/downloads/publications/Ellen-MacArthur-Foundation-Towards-the-Circular-Economy-vol.1.pdf.
- Stamets, P., and Chilton, J.S. (1983). The Mushroom Cultivator, Agarikon Press, Olympia. [1st ed.].
Cited by
Items 201–289 of 289
Recent Research Trends on Life Cycle Assessment (LCA) of Mycelium-based Composites (MBCs)
Das, N., Lee, E., & Shin, H.-J. (2026) · KSBB Journal · doi:10.7841/ksbbj.2026.41.1.45 · Cited by 1
Yakub, A. A., Abubakar, A., Salawu, A. O., Gimba, S. D., Jolaoye, A. A., & Zaidu, Z. M. (2024) · HAFED POLY Journal of Science Management and Technology · doi:10.4314/hpjsmt.v5i2.15 · Cited by 1
Чащилов, Д. В., Minakov, D. V., Minakova, A. A., & Bychin, N. V. (2024) · Russian Journal of Applied Chemistry · doi:10.1134/s1070427224040049 · Cited by 1
Generalizable Metamaterials Design Techniques Inspire Efficient Mycelial Materials Inverse Design
Zavorskas, J., Edwards, H., Marten, M. R., Harris, S. D., & Srivastava, R. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01986 · Cited by 2
Biodegradable Sheets from Dried Mycelia of Edible Mushrooms
Pattarasiripol, C., Jitjak, W., & Knijnenburg, J. T. N. (2025) · Journal of Tropical Biodiversity and Biotechnology · doi:10.22146/jtbb.14001 · Cited by 1
“…from mushrooms in combination with natural plant fibers have been increasingly studied such as bricks, soundproof walls, and green packaging, e.g., boxes including fibers for textile industries (Haneef et al. 2017; Islam et al. 2017; Girometta et al. 2019; Jones et al. 2018; Whabi et al. 2024).”
Hsu, T. Y., Dessi-Olive, J., & Seders, C. (2025) · Noise Control Engineering Journal · doi:10.3397/1/377316 · Cited by 1
Biofabrication and performance of mixed-density mycelium modules
Bitting, S., Rossi, V., Möwes, H., Stucki, S., Shoenwald, S., Mele, T. V., & Block, P. (2025) · CRC Press eBooks · doi:10.1201/9781003658641-39 · Cited by 1
Tree bark as a substrate for mycelium-bound composites with two Ganoderma species
Felle, T. K., Estenfelder, J., Wenig, C., Berendt, F., Eder, M., Cheng, T., & Benz, J. P. (2025) · Discover Materials · doi:10.1007/s43939-025-00507-0 · Cited by 1
“In contrast, composites produced with G. sessile exhibited a thicker mycelium layer, reducing water absorption due to the hydrophobic properties of fungal proteins such as hydrophobins [37, 38].”
Mycelium insulation and orientation strategies for reducing building energy demand in Southeast Asia
Tongtuam, Y., & Jinanukul, P. (2026) · Journal of Asian Architecture and Building Engineering · doi:10.1080/13467581.2026.2614137 · Cited by 1
Yaacob, N. D., Zazudin, A. N. N. M., Majib, N. M., & Ting, S. S. (2026) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/14777606261422750 · Cited by 1
Mechanical and acoustical properties of mycelium-based composites from spent mushroom substrates
Dognini, C., Bonis, M. D., Pecchia, J. A., Depero, L. E., & Gürsoy, B. (2026) · Discover Materials · doi:10.1007/s43939-026-00552-3 · Cited by 2
“Among the literature, compressive strength values remain relatively low, typically below 2 MPa, Generally, according to the literature, compressive strength in MBCs consistently ranges between 29 kPa and 567 kPa [49].”
Valorization of Juice Industry Waste Into Foam‐Like Materials Using Mycelium as Natural Binder
Mousavi, S. N., Rodríguez, P. P. I., de Lima, J. A., Wijayarathna, E. R. K. B., Ramamoorthy, S. K., Hakkarainen, M., & Zamani, A. (2026) · CleanMat. · doi:10.1002/clem.70023 · Cited by 1
Pacheco-Torgal, F., & Chindaprasirt, P. (2026) · Sustainability · doi:10.3390/su18115508 · Cited by 1
“Very low mass; Class B fire performance without chemical treatment [36,37].”
InfluentialYuan, S., Chen, C., & Xu, W. (2026) · Polymers · doi:10.3390/polym18161946 · Cited by 2
“Mechanical properties similar to cork, low thermal conductivity [50,92] Aerospace and cutting-edge applications”
Picco, C. M., Regenhardt, S. A., Bálsamo, N. F., & Palma, S. D. (2022) · AJEA · doi:10.33414/ajea.1027.2022 · Cited by 1
Microbial Biomaterials and Their Industrial Applications
Bhattacharya, C., & Das, M. (2023) · Interdisciplinary biotechnological advances · doi:10.1007/978-981-99-1737-2_15 · Cited by 1
Construction biotechnology: The promise of sustainable buildings
Fakruddin, M., & Shishir, M. A. (2023) · Reciklaza i odrzivi razvoj · doi:10.5937/ror2301041f · Cited by 1
Alternative Building Materials for a Sustainable Built Environment: A Literature Review
Rivera-Lutap, J. A., Cruz, O. G. D., Jacinto, J. M., Vael, L. M. D., & Muhi, M. M. (2024) · Environmental science and engineering · doi:10.1007/978-3-031-48204-5_20 · Cited by 2
Bazı Mantar Miselyumlarından Yalıtım Malzemesi Üretimi Üzerine Bir Araştırma
Bıyık, H. H., & Özgür, A. (2024) · Mantar dergisi · doi:10.30708/mantar.1566720 · Cited by 2
Rahmad, D., Putri, D. K., Akbar, A., & Hasni, D. (2025) · RASAYAN Journal of Chemistry · doi:10.31788/rjc.2025.1839144 · Cited by 1
On Electrical Gates on Fungal Colony
Beasley, A. E., Ayres, P., Tegelaar, M., Tsompanas, M., & Adamatzky, A. (2023) · Emergence, complexity and computation · doi:10.1007/978-3-031-38336-6_20
Influência da colonização fúngica no comportamento mecânico em compressão de micocompósitos
de Oliveira, B. F., Silva, N. P., Oliveira, M. P., Mussi‐Dias, V., & Freire, M. D. G. M. (2022) · Exatas & Engenharia · doi:10.25242/885x123520222508
Requisitos e procedimentos de execução de pisos e calçadas com agregados reciclados
Ribeiro, E. V. O. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.05
BIM: A gestão de obras nas dimensões 4D e 5D
de Castro, O. B. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.09
Sapatas isoladas: Especificações técnicas para elaboração de projeto e execução
Cruz, V. F. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.13
Thalita, K. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.07
Sevalho, M. N. B., & Ribas, L. F. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.08
O novo marco regulatório do saneamento e seus reflexos na cidade de Manaus
de Jesus, W. R. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.14
Saberes da Engenharia: Uma contribuição para a sociedade - Volume 3
(2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4
de Araújo, A. C. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.02
Causas e tratamentos de infiltração por capilaridade em edificações
de Oliveira, C. R. L. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.04
Procedimentos e cuidados na execução de lajes pré-fabricadas treliçadas na cidade de Manaus-AM
Mousse, T. A. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.12
Analise do uso de painéis fotovoltaicos em residência
Neto, A. R. F. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.01
Sustentabilidade em condomínios residenciais
Bezerra, P. A. C. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.10
de Souza, P. H. R. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.11
As propriedades de isolante térmico à base de fungo: Uma revisão sistemática
Pinheiro, F. D. M., & Cavalcante, T. F. (2023) · Editora Poisson eBooks · doi:10.36229/978-65-5866-262-4.cap.06
Lubis, S. F., Muslim, I., Adfan, M. A., Wibisono, G., & Olivia, M. (2023) · Jurnal Serambi Engineering · doi:10.32672/jse.v8i2.5993
“dapat dijadikan material alternatif karena dapat memiliki ikatan kimia aktif dengan substrat yang cocok seperti TKKS [4][5].”
BackgroundElectrical Response of Fungi to Changing Moisture Content
Phillips, N., Gandía, A., & Adamatzky, A. (2023) · Emergence, complexity and computation · doi:10.1007/978-3-031-38336-6_12
Mem-Fractive Properties of Fungi
Beasley, A. E., Abdelouahab, M.-S., Lozi, R., Tsompanas, M., & Adamatzky, A. (2023) · Emergence, complexity and computation · doi:10.1007/978-3-031-38336-6_15
COMPOSITE MIXTURES OF LIGNOSULFONATE REAGENT SYSTEMS WITH SILICON COMPOUNDS
Тептерева, Г. А., Rolnik, L. Z., Викторович, П. Н., & Bakhtigareev, I. A. (2024) · IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA · doi:10.6060/ivkkt.20246702.6855
Laoli, I. A. P., Wulandari, A. P., Rachmawati, U., Sukmana, D. R., Dewi, A. H., & Rossiana, N. (2024) · Jurnal Biodjati · doi:10.15575/biodjati.v9i1.30021
Garg, N., & Gupta, S. K. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4868013
Chlebnikovas, A., Gavenauskas, M., Motiejūnaitė, J., Jasevičius, R., & Vaišis, V. (2024) · Processes · doi:10.3390/pr12081545
Чащилов, Д. В., Minakov, D. V., Минакова, А. А., & Бычин, Н. В. (2024) · Южно-Сибирский научный вестник · doi:10.25699/sssb.2024.55.3.003 · Cited by 1
Mycelium-Based Lignocellulosic Composites: Sustainable Innovations in Green Materials
Somal, M., Chauhan, S., & Kumar, R. (2024) · Encyclopedia of Green Materials · doi:10.1007/978-981-16-4921-9_291-1
Чащилов, Д. В., Minakov, D. V., Вигант, А. В., & Savrasov, E. S. (2024) · Южно-Сибирский научный вестник · doi:10.25699/sssb.2024.58.6.049
Jugkrapongthakul, A., Sridaranon, N., & Visitsak, S. (2025) · Agriculture and Natural Resources · doi:10.34044/j.anres.2025.59.2.03
Rahmad, D., Putri, D. K., Akbar, A., & Asra, S. (2025) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/1510/1/012034
Functionalized Micellar Membranes from Medicinal Mushrooms as Promising Self-Growing Bioscaffolds
Kučuk, N., Primožič, M., Knez, Ž., & Leitgeb, M. (2025) · Polymers · doi:10.3390/polym17172334
“Recent research studies have shown that non compacted foam-like mycelial composites can compete with conventional materials such as expanded polystyrene and other foams or biocomposites such as hempcrete [10,11].”
Alajlan, Z. S. (2025) · Geo-Extreme · doi:10.1061/9780784486535.011
Medici, S. D., Ciampa, F., Giorgio, C. D., & Pinto, F. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5718951
Medici, S. D., Ciampa, F., Giorgio, C. D., & Pinto, F. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5735683
Study of the Physical Properties of Mycopolymers Based on Xylotrophic Agaricomycetes
Popyvanov, D. V. (2025) · Biology Bulletin Reviews · doi:10.1134/s2079086425601012
Mixture design of experiments to improve fungal degradation of cosmetic pigments
Ribezzi, E., Fornari, F., Riboni, N., Rizzo, M. V., Mattarozzi, M., Piergiovanni, M., Mori, A., Goi, P., Sciancalepore, C., Milanese, D., et al. (2025) · RSC Sustainability · doi:10.1039/d5su00770d
Castro-Armendáriz, G. A., & Luna, A. M. (2026) · Canadian Journal of Civil Engineering · doi:10.1139/cjce-2025-0368 · Cited by 1
Characterization of a Mushroom Mycelium Composite Material as an Eco-based Packaging Solution
Rahma Yanti, T., & Asfar, M. (2025) · Buletin Loupe · doi:10.51967/buletinloupe.v21i01.3363
Mycelium: The Sustainable Revolution in Eco-friendly Materials
Rathinamoorthy, R., & Logitha, N. (2026) · Springer eBooks · doi:10.1007/978-3-319-48281-1_207-1
Mycelium-based composites: A review of a sustainable alternative for thermal insulation
Ashraf, U., Hzami, A., & Alghamri, R. (2026) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/1587/1/012037
“The two main types of MBCs materials are mycelium-based foams (MBFs) and mycelium-based sandwich composites MBSCs [16], as shown in figure 1 [17] .”
Siddika, A., Pei, Z., & Jin, C. (2026) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4071403
The compressive strength of mycelium-based composites from Namibian encroacher bush
Nashandi, H., Kadhila-Muandingi, N. P., & Daniel, L. S. (2026) · Academia Materials Science · doi:10.20935/acadmatsci8211
Salehi, S., Bivins, C. P., & Porter, D. L. (2026) · Acta Biomaterialia · doi:10.1016/j.actbio.2026.04.005
MYCELIUM-BASED COMPOSITES OVER TIME: MECHANICAL CHARACTERISTICS AND MANUFACTURING PROCESS
Alexander, C. G., & Luna, A. M. (2026) · Journal of Sustainability Science and Management · doi:10.46754/jssm.2026.01.011
Biological Design Beyond Earth: Mycelium-Regolith Habitats for Space Exploration
Lipińska, M. B. (2026) · Routledge eBooks · doi:10.4324/9781003676171
Kattimani, P. C., Biradar, A., Munde, Y. S., Mahale, R. S., Rai, R. S., & Hegde, A. (2026) · Scientific Reports · doi:10.1038/s41598-026-49585-x
“The needs of the packaging industry include the need for high-performance, cost-competitive packaging technology which meets the requirements of thermal insulation, is waterproof, and biodegradable in soil in 45 days 9 .”
Exploring Uncharted Applications of Mushrooms for Textile and Packaging
Bhadoriya, P., Virmani, A., & Gupta, B. R. (2026) · Springer eBooks · doi:10.1007/978-981-95-7692-0_16
Hyphal architecture within the trimitic system governs performance of mycelium-bound composites
Pranzoni, C. A., Suárez, A., Kolodziej, Y., García, M. M., & Ochoa, N. A. (2026) · Materialia · doi:10.1016/j.mtla.2026.102769
Jaya Bharathi, M., & Thilagavathi, G. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6914460
Enhanced Thermal Mass of Mycelium-Based Biocomposites for Timber Constructions: A Comparative Study
Petržela, B., Zachara, T., Jozífek, M., Pavelek, M., & Hýsek, Š. (2026) · Forests · doi:10.3390/f17070763
Properties of a mycelium-bonded wheat straw insulation panel
Vay, O., Lauberger, F., Preimesberger, C., Solt-Rindler, A., Effenberger, J., Koeppe, R., Kaltenbrunner, M., Hansmann, C., & Rieder-Gradinger, C. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.147423
Design, Aesthetics and Environmental Sustainability: Analysis of Mushroom Mycelium Materials
Pan, Z. (2026) · International Conference on Intelligent Engineering and Next-Gen Healthcare Systems (IEHNS) · doi:10.1109/iehns68708.2026.11606790
“Girometta et al. [5] conducted a comprehensive review of physico-mechanical and thermodynamic properties, confirming that the porous hyphae network contributes to both structural rigidity and thermal insulation.”
Hýsek, Š., & Petržela, B. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.116908
Guleria, P., & Rout, P. R. (2026) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-026-05226-z
“The approach is especially useful for large architectural structures and furniture (Dessi-Olive 2022; Javadian et al. 2020; Girometta et al. 2019 ; Baker-Brown 2019).”
Ocegueda-Vega, D. S., Flores‐Ramírez, N., Vásquez-García, S. R., Martínez‐Flores, H. E., Velázquez-Becerra, C., & Luna, A. M. (2026) · Polymer Bulletin · doi:10.1007/s00289-026-06683-0
“In this context, mycelium-based composites (MBCs) have emerged as a promising biofabrication strategy [9–11 ].”
Aransiola, S. A., Adige, A. A., Okwute, O. L., Machunga-Mambula, S. S., & Akin-Osanaiye, B. C. (2026) · African Scientific Reports · doi:10.46481/asr.2026.5.3.555
Fungal Biotechnology for Sustainable Biocomposites: From Mycelium Growth to Material Translation
Nguyen, T. H. P., Thompson, L., Nikzad, M., & Sümer, H. (2026) · Molecules · doi:10.3390/molecules31183272
“As shown in Table 5, a broad range of materials have been explored as the substrate for MBCs with a particular focus towards biological and agricultural waste [84,87–89].”
Effects of catalyst and aging methods on fungi-silica hybrid biotemplated materials
Salehi, S., Zhao, T., Juaneza, A., & Porter, D. L. (2026) · MRS Communications · doi:10.1557/s43579-026-01048-0
Use of mycelium in architecture: a research and experimental architectural workshop
Stavrev, M., Berčič, T., Mahovič, A., & Shundovska, A. (2026) · Architectural Science Review · doi:10.1080/00038628.2026.2734424
Tamayo, E., Bachmann, F., Cheng, T., Felle, T. K., Nussbaumer, M., & Benz, J. P. (2026) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-026-14043-1
Mycelium and Coconut Fiber Composites: Analysis of the Manufacturing Process
Thomazini, Á. D. N., & Nico-Rodrigues, E. A. (2026) · Lecture notes in civil engineering · doi:10.1007/978-3-032-35104-3_76
Lipka, N., Marzec, K., Bańcer, K., Głowacki, A., & Kaca, W. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1907544
“While numerous mycelium applications have been described, including building materials and packaging, textile-GRAPHICAL containing substrates have rarely been reported (Yang et al., 2021 Lim et al., 2013; Girometta et al., 2019; Ali et al., 2023).”
Physico-mechanical characterization of a fungal biocomposite reinforced by wood particles
Kaffash, A., Janpoor, J., Safaeian, P., Yousefsani, S. A., & Tahani, M. (2026) · Functional Composites and Structures · doi:10.1088/2631-6331/aeb646
Olaniran, S., Pfarr, C., Heijen, R. S., Kolb, T., Ferdous, W., Manalo, A., & Yan, L. (2026) · Composites Part C Open Access · doi:10.1016/j.jcomc.2026.100839
Dueñas, N., Celedon, R., Buitrón, D. S. A., & Cruz, M. L. F. D. C. (2026) · Journal of Fungi · doi:10.3390/jof12100788
“The decrease in MBF final density is closely related to porosity and the progressive replacement of the solid substrate by the fungal mycelial network, leading to a decrease in the density of the composite material [61].”
Rodrigues, M., Michelin, M., Martins, D., Ferraz, A., Teixeira, J. A., & Colussi, F. (2026) · Materials Today Communications · doi:10.1016/j.mtcomm.2026.116545
Metadata
- Authors
- Girometta, C., Picco, A. M., Baiguera, R. M., Dondi, D., Babbini, S., Cartabia, M., Pellegrini, M., & Savino, E.
- Affiliations
- University of Pavia (IT)
- MOGU S.r.l., Via S. Francesco, 61, 21020 Inarzo, VA, Italy
- Corresponding author
- Picco, Anna Maria
- ORCID
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2019-01-08
- Volume
- 11
- Issue
- 1
- Pages
- 281
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2897497425
- Cited by
- 276
- References
- 81
- Citations by year
- 2026: 39 · 2025: 40 · 2024: 47 · 2023: 53 · 2022: 44 · 2021: 31 · 2020: 14 · 2019: 8
- FWCI
- 10.36
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Foaming and Composites
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Keywords
- sandwich composites, lignocellulosic waste valorization, fungal growth, thermal insulation, sound insulation, mechanical properties, physico-mechanical properties, thermodynamic properties, circular economy, packaging materials, insulating panels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.