The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
Recent Progress in Green Cement Technology Utilizing Low-Carbon Emission Fuels and Raw Materials: A Review
Open accessAbstract
The cement industry is facing numerous challenges in the 21st century due to depleting natural fuel resources, shortage of raw materials, exponentially increasing cement demand and climate linked environmental concerns. Every tonne of ordinary Portland cement (OPC) produced releases an equivalent amount of carbon dioxide to the atmosphere. In this regard, cement manufactured from locally available minerals and industrial wastes that can be blended with OPC as substitute, or full replacement with novel clinkers to reduce the energy requirements is strongly desirable. Reduction in energy consumption and carbon emissions during cement manufacturing can be achieved by introducing alternative cements. The potential of alternative cements as a replacement of conventional OPC can only be fully realized through detailed investigation of binder properties with modern technologies. Seven prominent alternative cement types are considered in this study and their current position compared to OPC has been discussed. The study provides a comprehensive analysis of options for future cements, and an up-to-date summary of the different alternative fuels and binders that can be used in cement production to mitigate carbon dioxide emissions. In addition, the practicalities and benefits of producing the low-cost materials to meet the increasing cement demand are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
Rebitzer, G., Ekvall, T., Frischknecht, R., Hunkeler, D., Norris, G., Rydberg, T., Schmidt, W.-P., Suh, S., Weidema, B. P., & Pennington, D. W. (2004) · Environment International · doi:10.1016/j.envint.2003.11.005 · Cited by 2,753 · cited 1×
“Life cycle assessment (LCA) is a method that evaluates the environmental aspects and impacts of materials, products, and technologies through product’s life cycle [117,118].”
MethodCarbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
Industrially interesting approaches to “low-CO2” cements
Gartner, E. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.01.021 · Cited by 2,016
Calcined clay limestone cements (LC3)
Scrivener, K., Martirena, F., Bishnoi, S., & Maity, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.017 · Cited by 1,763
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Sustainable cement production—present and future
Schneider, M., Romer, M., Tschudin, M., & Bolio, H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.019 · Cited by 1,643
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
Cement substitution by a combination of metakaolin and limestone
Antoni, M., Rossen, J., Martirena, F., & Scrivener, K. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.09.006 · Cited by 1,419
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Huntzinger, D. N., & Eatmon, T. D. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.04.007 · Cited by 1,392
Lackner, K. S. (2003) · Science · doi:10.1126/science.1079033 · Cited by 1,290
Fernandez, R., Martirena, F., & Scrivener, K. L. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.09.013 · Cited by 1,180
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements
Li, C., Sun, H., & Li, L. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.03.020 · Cited by 1,108
Sustainable development and climate change initiatives
Damtoft, J. S., Lukasik, J., Herfort, D., Sorrentino, D., & Gartner, E. M. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.09.008 · Cited by 1,094
Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer
Rovnaník, P. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.12.023 · Cited by 1,020
Trends and developments in green cement and concrete technology
Imbabi, M. S., Carrigan, C., & McKenna, S. (2012) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2013.05.001 · Cited by 1,012
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
Alkali-activated binders: A review
Pacheco-Torgal, F., Castro-Gomes, J., & Jalali, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.10.015 · Cited by 989
Geopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Kinetics of geopolymerization: Role of Al2O3 and SiO2
Silva, P. D., Sagoe-Crenstil, K., & Sirivivatnanon, V. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.01.003 · Cited by 916
Van den Heede, P., & De Belie, N. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.01.004 · Cited by 824
Barcelo, L., Kline, J., Walenta, G., & Gartner, E. (2014) · Materials and Structures · doi:10.1617/s11527-013-0114-5 · Cited by 816
Life cycle assessment Part 2: Current impact assessment practice
Pennington, D. W., Potting, J., Finnveden, G., Lindeijer, E., Jolliet, O., Rydberg, T., & Rebitzer, G. (2004) · Environment International · doi:10.1016/j.envint.2003.12.009 · Cited by 776
Chen, C., Habert, G., Bouzidi, Y., & Jullien, A. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.12.014 · Cited by 718
High-performance cement matrices based on calcium sulfoaluminate–belite compositions
Glasser, F. P., & Zhang, L. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00649-4 · Cited by 663
Gartner, E., & Hirao, H. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.012 · Cited by 607
Gartner, E., & Sui, T. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.002 · Cited by 580 · cited 10×
“However, BYF requires 20–30% less limestone compare to OPC, resulting in less CO2 emissions [84].”
BackgroundInfluentialThermal treatment of kaolin: the effect of mineralogy on the pozzolanic activity
Kakali, G., Perraki, T., Tsivilis, S. G., & BADOGIANNIS, E. G. (2001) · Applied Clay Science · doi:10.1016/s0169-1317(01)00040-0 · Cited by 576
Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate
Barbosa, V. F. F., & MacKenzie, K. J. D. (2003) · Materials Research Bulletin · doi:10.1016/s0025-5408(02)01022-x · Cited by 542
Comparison of test methods to assess pozzolanic activity
Donatello, S., Tyrer, M., & Cheeseman, C. R. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.10.008 · Cited by 525
Emission reduction of greenhouse gases from the cement industry
Hendriks, C. A., Worrell, E., Price, L., Martin, N., Ozawa Meida, L., de Jager, D., & Riemer, P. (1999) · Greenhouse Gas Control Technologies 4 · doi:10.1016/b978-008043018-8/50150-8 · Cited by 436
Cement Manufacture and the Environment. Part II: Environmental Challenges and Opportunities
van Oss, H. G., & Padovani, A. C. (2003) · Journal of Industrial Ecology · doi:10.1162/108819803766729212 · Cited by 413
Jang, J. G., & Lee, H. K. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.01.001 · Cited by 409
Self-citationKovalchuk, G., Fernández-Jiménez, A., & Palomo, A. (2007) · Fuel · doi:10.1016/j.fuel.2006.07.010 · Cited by 398
A physico-chemical basis for novel cementitious binders
Gartner, E. M., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.006 · Cited by 363
CO2 Capture Technologies for Cement Industry
Bosoaga, A., Masek, O., & Oakey, J. E. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.020 · Cited by 362
Impacting factors and properties of limestone calcined clay cements (LC3)
Scrivener, K., Avet, F., Maraghechi, H., Zunino, F., Ston, J., Hanpongpun, W., & Favier, A. (2019) · Green Materials · doi:10.1680/jgrma.18.00029 · Cited by 354
Hydration and properties of sodium sulfate activated slag
Rashad, A. M., Bai, Y., Basheer, P. A. M., Milestone, N. B., & Collier, N. C. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.12.010 · Cited by 335
Assessing the environmental and economic potential of Limestone Calcined Clay Cement in Cuba
Sánchez Berriel, S., Favier, A., Rosa Domínguez, E., Sánchez Machado, I. R., Heierli, U., Scrivener, K., Martirena Hernández, F., & Habert, G. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.125 · Cited by 335
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
Jang, J. G., Lee, N. K., & Lee, H. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.048 · Cited by 318
Self-citationCement production technology improvement compared to factor 4 objectives
Habert, G., Billard, C., Rossi, P., Chen, C., & Roussel, N. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.09.031 · Cited by 313
Rashad, A. M., & Zeedan, S. R. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.12.044 · Cited by 306
The greenhouse gas implications of using ground granulated blast furnace slag as a cement substitute
Crossin, E. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.082 · Cited by 275
Cement Technology Roadmap: Carbon Emissions Reductions up to 2050
International Energy Agency (2009) · IEA Technology Roadmaps · doi:10.1787/9789264088061-en · Cited by 242
Implementation of best available techniques in cement manufacturing: a life-cycle assessment study
Valderrama, C., Granados, R., Cortina, J. L., Gasol, C. M., Guillem, M., & Josa, A. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.11.055 · Cited by 220
Development of the use of sulfo- and ferroaluminate cements in China
Zhang, L., Su, M., & Wang, Y. (1999) · Advances in Cement Research · doi:10.1680/adcr.1999.11.1.15 · Cited by 217
Identifying Improvement Potentials in Cement Production with Life Cycle Assessment
Boesch, M. E., & Hellweg, S. (2010) · Environmental Science & Technology · doi:10.1021/es100771k · Cited by 198
Green chemistry for sustainable cement production and use
Phair, J. W. (2006) · Green Chemistry · doi:10.1039/b603997a · Cited by 197
Arjunan, P., Silsbee, M. R., & Roy, D. M. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00072-1 · Cited by 196
Comparative analysis of the life cycle impact assessment of available cement inventories in the EU
Josa, A., Aguado, A., Cardim, A., & Byars, E. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.02.004 · Cited by 186
Calcined kaolinite–bentonite clay blends as supplementary cementitious materials
Taylor-Lange, S. C., Lamon, E. L., Riding, K. A., & Juenger, M. C. G. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.01.025 · Cited by 186
Life-cycle analysis of geopolymers
Weil, M., Dombrowski, K., & Buchwald, A. (2009) · Geopolymers · doi:10.1533/9781845696382.2.194 · Cited by 185
Comparative analysis of available life cycle inventories of cement in the EU
Josa, A., Aguado, A., Heino, A., Byars, E. A., & Cardim, A. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.12.020 · Cited by 183
Life cycle assessment of the production of cement: A Brazilian case study
Stafford, F. D. N., Pereira, F. R., Labrincha, J. A., & Hotza, D. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.050 · Cited by 170
Assessing the environmental impact of conventional and ‘green’ cement production
Habert, G. (2014) · Elsevier eBooks · doi:10.1533/9780857097729.2.199 · Cited by 167
Life cycle assessment of the use of alternative fuels in cement kilns: A case study
Georgiopoulou, M., & Lyberatos, G. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.07.017 · Cited by 166
Valipour, M., Yekkalar, M., Shekarchi, M., & Panahi, S. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.07.055 · Cited by 161
Sustainability of construction materials
Khatib, J. M. (2009) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845695842 · Cited by 159
The alkali–silica reaction in alkali-activated granulated slag mortars with reactive aggregate
Fernández‐Jiménez, A., & Puertas, F. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00745-1 · Cited by 155
Thermal Activation of a Pure Montmorillonite Clay and Its Reactivity in Cementitious Systems
Garg, N., & Skibsted, J. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp502529d · Cited by 150
Hydration and Carbonation of Pozzolanic Cements
Papadakis, V. G., Fardis, M. N., & Vayenas, C. G. (1992) · ACI Materials Journal · doi:10.14359/2185 · Cited by 147
Bontempi, E. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.028 · Cited by 144
Influence of carbonation on the properties of reactive magnesia cement-based pressed masonry units
Líška, M., Vandeperre, L. J. M., & Al‐Tabbaa, A. (2008) · Advances in Cement Research · doi:10.1680/adcr.2008.20.2.53 · Cited by 139
Clay content of argillites: Influence on cement based mortars
Habert, G., Choupay, N., Escadeillas, G., Guillaume, D., & Montel, J.-M. (2008) · Applied Clay Science · doi:10.1016/j.clay.2008.09.009 · Cited by 111
Lund, P. D. (2007) · Ecological Economics · doi:10.1016/j.ecolecon.2007.02.002 · Cited by 111
Rashad, A. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.09.018 · Cited by 107
An analysis of the use of life cycle assessment for waste co-incineration in cement kilns
Gálvez‐Martos, J., & Schoenberger, H. (2014) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2014.02.009 · Cited by 106
Jang, J. G., Ahn, Y. B., Souri, H., & Lee, H. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.058 · Cited by 101
Self-citationUnlocking the role of MgO in the carbonation of alkali-activated slag cement
Park, S., Jang, J. G., & Lee, H. (2018) · Inorganic Chemistry Frontiers · doi:10.1039/c7qi00754j · Cited by 86
Self-citationToward a Sustainable Cement Industry
Humphreys, K. K. (2002) · Cited by 85
ASR Potentials of Glass Aggregates in Water-Glass Activated Fly Ash and Portland Cement Mortars
Xie, Z., Xiang, W., & Xi, Y. (2003) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2003)15:1(67 · Cited by 78
Celitement - a sustainable prospect for the cement industry
Stemmermann, P., Schweike, U., Garbev, K., Beuchle, G., & Møller, H. (2010) · Cited by 68
Maravelaki-Kalaitzaki, P., & Moraitou, G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00197-0 · Cited by 66
Gäbel, K., Forsberg, P., & Tillman, A. (2003) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00196-8 · Cited by 57
THE CONSTRUCTION INDUSTRY MASS BALANCE: RESOURCE USE, WASTES AND EMISSIONS
Smith, R. A., Kersey, J., & Griffiths, P. (2002) · Cited by 42
Properties of Belite-Rich Portland Cement and Concrete in China
Sui, T., Fan, L., Wen, Z., & Wang, J. (2015) · Journal of Civil Engineering and Architecture · doi:10.17265/1934-7359/2015.04.002 · Cited by 37
Raw Materials Substitution Sustainability
Bontempi, E. (2017) · SpringerBriefs in applied sciences and technology · doi:10.1007/978-3-319-60831-0 · Cited by 30
Cited by
The Rising Threat of Atmospheric CO2: A Review on the Causes, Impacts, and Mitigation Strategies
Nunes, L. J. R. (2023) · Environments · doi:10.3390/environments10040066 · Cited by 587
Low-CO2 emission strategies to achieve net zero target in cement sector
Supriya, Chaudhury, R., Sharma, U., Thapliyal, P. C., & Singh, L. P. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137466 · Cited by 576
A review on alternative fuels in future energy system
Stančin, H., Mikulčić, H., Wang, X., & Duić, N. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109927 · Cited by 475
de Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Metadata
- Authors
- Naqi, A., & Jang, J. G.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2019-01-21
- Volume
- 11
- Issue
- 2
- Pages
- 537
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2910232410
- Cited by
- 406
- References
- 79
- FWCI
- 27.84
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.