CoChat

Twenty-first century ocean warming, acidification, deoxygenation, and upper-ocean nutrient and primary production decline from CMIP6 model projections

Open access

Published version of a preprint

The DOI matches its Crossref record; 201 of the 201 references it cites were found in a registry or an index.

Abstract

Anthropogenic climate change is projected to lead to ocean warming, acidification, deoxygenation, reductions in near-surface nutrients, and changes to primary production, all of which are expected to affect marine ecosystems. Here we assess projections of these drivers of environmental change over the twenty-first century from Earth system models (ESMs) participating in the Coupled Model Intercomparison Project Phase 6 (CMIP6) that were forced under the CMIP6 Shared Socioeconomic Pathways (SSPs). Projections are compared to those from the previous generation (CMIP5) forced under the Representative Concentration Pathways (RCPs). A total of 10 CMIP5 and 13 CMIP6 models are used in the two multi-model ensembles. Under the high-emission scenario SSP5-8.5, the multi-model global mean change (2080–2099 mean values relative to 1870–1899) ± the inter-model SD in sea surface temperature, surface pH, subsurface (100–600 m) oxygen concentration, euphotic (0–100 m) nitrate concentration, and depth-integrated primary production is +3.47±0.78 ∘ C, -0.44±0.005, -13.27±5.28, -1.06±0.45 mmol m −3 and -2.99±9.11 %, respectively. Under the low-emission, high-mitigation scenario SSP1-2.6, the corresponding global changes are +1.42±0.32 ∘ C, -0.16±0.002, -6.36±2.92, -0.52±0.23 mmol m −3 , and -0.56±4.12 %. Projected exposure of the marine ecosystem to these drivers of ocean change depends largely on the extent of future emissions, consistent with previous studies. The ESMs in CMIP6 generally project greater warming, acidification, deoxygenation, and nitrate reductions but lesser primary production declines than those from CMIP5 under comparable radiative forcing. The increased projected ocean warming results from a general increase in the climate sensitivity of CMIP6 models relative to those of CMIP5. This enhanced warming increases upper-ocean stratification in CMIP6 projections, which contributes to greater reductions in upper-ocean nitrate and subsurface oxygen ventilation. The greater surface acidification in CMIP6 is primarily a consequence of the SSPs having higher associated atmospheric CO 2 concentrations than their RCP analogues for the same radiative forcing. We find no consistent reduction in inter-model uncertainties, and even an increase in net primary production inter-model uncertainties in CMIP6, as compared to CMIP5.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.5194/bg-17-3439-2020

Cites

201 of 201 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Global mean projections of upper-ocean impact drivers. Global mean projections of (a) sea surface temperature ( C), (b) surface ocean pH, (c) subsurface dissolved O 2 concentration (averaged between 100-600 m I mmolm 3 ), (d) euphotic-zone NO 3 (averaged between 0-100 m I mmolm 3 ), and (e) depth-integrated net primary production ( %). Values are anomalies relative to the 1870-1899 reference period. CMIP6 mean anomalies for the historical and SSP simulations are shown as solid lines with shading representing the inter-model SD. CMIP5 projections only show the multi-model mean. The model ensemble size for each scenario is given in parentheses.
Figure 1 Global mean projections of upper-ocean impact drivers. Global mean projections of (a) sea surface temperature ( C), (b) surface ocean pH, (c) subsurface dissolved O 2 concentration (averaged between 100-600 m I mmolm 3 ), (d) euphotic-zone NO 3 (averaged between 0-100 m I mmolm 3 ), and (e) depth-integrated net primary production ( %). Values are anomalies relative to the 1870-1899 reference period. CMIP6 mean anomalies for the historical and SSP simulations are shown as solid lines with shading representing the inter-model SD. CMIP5 projections only show the multi-model mean. The model ensemble size for each scenario is given in parentheses.CC-BY · From the PDF
Figure 2 Projections of multiple upper-ocean impact drivers under SSP1-2.6 and SSP5-8.5. CMIP6 mean historical climatologies and twenty-first century anomalies in (a-c) sea surface temperature ( C), (d-f) surface ocean pH, (g-i) subsurface dissolved O 2 concentration (averaged between 100 and 600 m I mmolm 3 ), (j-l) euphotic-zone NO 3 (averaged between 0 and 100 m I mmolm 3 ), and (m-o) depthintegrated net primary production (gCm 2 y 1 ). Anomalies are 2080-2099 mean values relative to the 1995-2014 baseline period. Stippling designates areas of projection robustness. For temperature and pH this is defined as the magnitude of the mean anomaly exceeding the intermodel SD. For O 2 , NO 3 , and NPP this is defined as at least 80 % model sign agreement.
Figure 2 Projections of multiple upper-ocean impact drivers under SSP1-2.6 and SSP5-8.5. CMIP6 mean historical climatologies and twenty-first century anomalies in (a-c) sea surface temperature ( C), (d-f) surface ocean pH, (g-i) subsurface dissolved O 2 concentration (averaged between 100 and 600 m I mmolm 3 ), (j-l) euphotic-zone NO 3 (averaged between 0 and 100 m I mmolm 3 ), and (m-o) depthintegrated net primary production (gCm 2 y 1 ). Anomalies are 2080-2099 mean values relative to the 1995-2014 baseline period. Stippling designates areas of projection robustness. For temperature and pH this is defined as the magnitude of the mean anomaly exceeding the intermodel SD. For O 2 , NO 3 , and NPP this is defined as at least 80 % model sign agreement.CC-BY · From the PDF
Figure 3 Change in subsurface oxygen saturation and apparent oxygen utilisation under SSP5-8.5. CMIP6 multi-model mean changes in (a) subsurface dissolved O 2 concentration (averaged between 100 and 600 m I mmolm 3 ), (b) subsurface O 2 saturation (O 2 sat ), and (c) subsurface apparent oxygen utilisation (AOU) in 2080-2099 of SSP5-8.5 relative to 1995-2014. Stippling designates robustness, as defined by at least 80 % model sign agreement (only a subset of CMIP6 models were considered).
Figure 3 Change in subsurface oxygen saturation and apparent oxygen utilisation under SSP5-8.5. CMIP6 multi-model mean changes in (a) subsurface dissolved O 2 concentration (averaged between 100 and 600 m I mmolm 3 ), (b) subsurface O 2 saturation (O 2 sat ), and (c) subsurface apparent oxygen utilisation (AOU) in 2080-2099 of SSP5-8.5 relative to 1995-2014. Stippling designates robustness, as defined by at least 80 % model sign agreement (only a subset of CMIP6 models were considered).CC-BY · From the PDF
Figure 4 Change in stratification and mixed-layer depth in SSP1-2.6 and SSP5-8.5. CMIP6 mean historical climatologies and anomalies in (a-c) stratification index between 200 m and the surface (kgm 3 ), (d-f) stratification index between 1000 m and the surface (kgm 3 ), and (g-i) maximum annual mixed-layer depth (m). Anomalies are 2080-2099 mean values relative to 1995-2014. The stratification index is defined as the difference in density between given depths and the surface. Stippling designates robustness, as defined by the magnitude of the mean anomaly exceeding the inter-model SD.
Figure 4 Change in stratification and mixed-layer depth in SSP1-2.6 and SSP5-8.5. CMIP6 mean historical climatologies and anomalies in (a-c) stratification index between 200 m and the surface (kgm 3 ), (d-f) stratification index between 1000 m and the surface (kgm 3 ), and (g-i) maximum annual mixed-layer depth (m). Anomalies are 2080-2099 mean values relative to 1995-2014. The stratification index is defined as the difference in density between given depths and the surface. Stippling designates robustness, as defined by the magnitude of the mean anomaly exceeding the inter-model SD.CC-BY · From the PDF
Figure 5 Compound upper-ocean impact drivers. Regions where projected CMIP6 sea surface warming exceeds 2 C, euphotic-zone (0-100 m) NO 3 decline exceeds 1 mmolm 3 , surface ocean pH decline exceeds 0.2, and subsurface (100-600 m) dissolved O 2 concentration decline exceeds 30 mmolm 3 in (a) SSP1-2.6, (b) SSP24.5, (c) SSP3-7.0, and (d) SSP5-8.5. The exceedance of driver thresholds is determined from 2080 to 2099 anomalies relative to 1995-2014 values.
Figure 5 Compound upper-ocean impact drivers. Regions where projected CMIP6 sea surface warming exceeds 2 C, euphotic-zone (0-100 m) NO 3 decline exceeds 1 mmolm 3 , surface ocean pH decline exceeds 0.2, and subsurface (100-600 m) dissolved O 2 concentration decline exceeds 30 mmolm 3 in (a) SSP1-2.6, (b) SSP24.5, (c) SSP3-7.0, and (d) SSP5-8.5. The exceedance of driver thresholds is determined from 2080 to 2099 anomalies relative to 1995-2014 values.CC-BY · From the PDF
Figure 6 Comparison between CMIP6 and CMIP5 end-of-century changes in upper-ocean impact drivers. (a) Atmospheric CO 2 concentration and radiative forcing derived from the MAGICC6 model in year 2100 for the CMIP6 SSPs and CMIP5 RCPs. (b-e) Global mean anomalies of (b) surface ocean pH, (c) subsurface dissolved O 2 concentration (averaged between 100 and 600 m I mmolm 3 ), (d) NO 3 concentration (averaged between 0 and 100 m I mmolm 3 ), and (e) integrated net primary production ( %) against anomalies of sea surface temperature ( C). Anomalies are 2080-2099 mean values relative to the 1870-1899 baseline period. Error bars represent the inter-model SD.
Figure 6 Comparison between CMIP6 and CMIP5 end-of-century changes in upper-ocean impact drivers. (a) Atmospheric CO 2 concentration and radiative forcing derived from the MAGICC6 model in year 2100 for the CMIP6 SSPs and CMIP5 RCPs. (b-e) Global mean anomalies of (b) surface ocean pH, (c) subsurface dissolved O 2 concentration (averaged between 100 and 600 m I mmolm 3 ), (d) NO 3 concentration (averaged between 0 and 100 m I mmolm 3 ), and (e) integrated net primary production ( %) against anomalies of sea surface temperature ( C). Anomalies are 2080-2099 mean values relative to the 1870-1899 baseline period. Error bars represent the inter-model SD.CC-BY · From the PDF
Figure 7 Global mean projections of benthic ocean impact drivers. CMIP6 global mean projections of benthic (a) temperature ( C), (b) pH, and (c) dissolved O 2 concentration (mmolm 3 ). Values are anomalies relative to the 1870-1899 reference period. Mean anomalies for the historical and SSP simulations are shown as solid lines, with shading representing the inter-model SD. The model ensemble size for each scenario is given in parentheses.
Figure 7 Global mean projections of benthic ocean impact drivers. CMIP6 global mean projections of benthic (a) temperature ( C), (b) pH, and (c) dissolved O 2 concentration (mmolm 3 ). Values are anomalies relative to the 1870-1899 reference period. Mean anomalies for the historical and SSP simulations are shown as solid lines, with shading representing the inter-model SD. The model ensemble size for each scenario is given in parentheses.CC-BY · From the PDF
Figure 8 Projections of multiple benthic ocean impact drivers under SSP1-2.6 and SSP5-8.5. CMIP6 mean historical climatologies and anomalies in benthic (a-d) temperature ( C), (e-h) pH, and (j-l) dissolved O 2 concentration (mmolm 3 ). Anomalies are 2080-2099 mean values relative to 1995-2014. Stippling designates areas of projection robustness. For temperature and pH this is defined as the magnitude of the mean anomaly exceeding the inter-model SD. For O 2 this is defined as at least 80 % model sign agreement. Vertical profiles show global mean benthic anomalies in 200 m depth intervals, with error bars denoting the inter-model SD.
Figure 8 Projections of multiple benthic ocean impact drivers under SSP1-2.6 and SSP5-8.5. CMIP6 mean historical climatologies and anomalies in benthic (a-d) temperature ( C), (e-h) pH, and (j-l) dissolved O 2 concentration (mmolm 3 ). Anomalies are 2080-2099 mean values relative to 1995-2014. Stippling designates areas of projection robustness. For temperature and pH this is defined as the magnitude of the mean anomaly exceeding the inter-model SD. For O 2 this is defined as at least 80 % model sign agreement. Vertical profiles show global mean benthic anomalies in 200 m depth intervals, with error bars denoting the inter-model SD.CC-BY · From the PDF
Figure 9 Magnitude and depth of maximum pH and [H C ] change under SSP5-8.5. The CMIP6 ensemble mean maximum change in (a) pH and (b) [H C ] in 2080-2099 of SSP5-8.5 relative to 1995-2014. The mean depth at which the maximum (c) pH and (d) [H C ] change is projected. Stippling designates robustness, as defined by the mean anomaly exceeding the inter-model SD.
Figure 9 Magnitude and depth of maximum pH and [H C ] change under SSP5-8.5. The CMIP6 ensemble mean maximum change in (a) pH and (b) [H C ] in 2080-2099 of SSP5-8.5 relative to 1995-2014. The mean depth at which the maximum (c) pH and (d) [H C ] change is projected. Stippling designates robustness, as defined by the mean anomaly exceeding the inter-model SD.CC-BY · From the PDF
Figure 10 Change in the seasonal amplitude of surface ocean [H C ] and pH. The CMIP6 historical climatologies and SSP5-8.5 anomalies in peak-to-peak seasonal amplitude of surface ocean (a, b) [H C ] and (c, d) pH. Anomalies are calculated from the mean seasonal amplitude in 2080-2099 relative to that in 1995-2014. Stippling designates robustness, as defined by at least 80 % model sign agreement.
Figure 10 Change in the seasonal amplitude of surface ocean [H C ] and pH. The CMIP6 historical climatologies and SSP5-8.5 anomalies in peak-to-peak seasonal amplitude of surface ocean (a, b) [H C ] and (c, d) pH. Anomalies are calculated from the mean seasonal amplitude in 2080-2099 relative to that in 1995-2014. Stippling designates robustness, as defined by at least 80 % model sign agreement.CC-BY · From the PDF
Figure 11 The seasonal amplitude of sea surface temperature. The CMIP6 multi-model mean peak-to-peak seasonal amplitude of sea surface temperature ( C) in (a) 1995-2014 of the historical simulations, (b) 2080-2099 of the SSP5-8.5 simulations, and (c) the change in seasonal amplitude between the two periods. Stippling designates robustness, as defined by at least 80 % model sign agreement.
Figure 11 The seasonal amplitude of sea surface temperature. The CMIP6 multi-model mean peak-to-peak seasonal amplitude of sea surface temperature ( C) in (a) 1995-2014 of the historical simulations, (b) 2080-2099 of the SSP5-8.5 simulations, and (c) the change in seasonal amplitude between the two periods. Stippling designates robustness, as defined by at least 80 % model sign agreement.CC-BY · From the PDF
Figure A1. The interquartile range associated with CMIP6 projections of upper-ocean impact drivers. The CMIP6 interquartile range ( Q 3 Q 1 ) of projected anomalies in (a, b) sea surface temperature ( C), (c, d) surface ocean pH, (e, f) subsurface dissolved O 2 concentration (averaged between 100 and 600 m I mmolm 3 ), (g, h) euphotic-zone NO 3 (averaged between 0 and 100 m I mmolm 3 ), and (i, j) depthintegrated net primary production (gCm 2 y 1 ). The corresponding mean projections are given in Fig. 2.
Figure A1. The interquartile range associated with CMIP6 projections of upper-ocean impact drivers. The CMIP6 interquartile range ( Q 3 Q 1 ) of projected anomalies in (a, b) sea surface temperature ( C), (c, d) surface ocean pH, (e, f) subsurface dissolved O 2 concentration (averaged between 100 and 600 m I mmolm 3 ), (g, h) euphotic-zone NO 3 (averaged between 0 and 100 m I mmolm 3 ), and (i, j) depthintegrated net primary production (gCm 2 y 1 ). The corresponding mean projections are given in Fig. 2.CC-BY · From the PDF
Figure A2. The interquartile range associated with CMIP6 projections of stratification and mixed-layer depth. The CMIP6 interquartile range ( Q 3 Q 1 ) of projected anomalies in (a, b) the stratification index between 200 m and the surface (kgm 3 ), (c, d) the stratification index between 1000 m and the surface (kgm 3 ), and (e, f) the maximum annual mixed-layer depth (m). The corresponding mean projections are given in Fig. 4.
Figure A2. The interquartile range associated with CMIP6 projections of stratification and mixed-layer depth. The CMIP6 interquartile range ( Q 3 Q 1 ) of projected anomalies in (a, b) the stratification index between 200 m and the surface (kgm 3 ), (c, d) the stratification index between 1000 m and the surface (kgm 3 ), and (e, f) the maximum annual mixed-layer depth (m). The corresponding mean projections are given in Fig. 4.CC-BY · From the PDF
Image 14
CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 201 references

Research works printed but not linked: 2

  1. Bindoff, N. L., Cheung, W. W. L., Kairo, J. G., Arístegui, J., Guinder, V. A., Hallberg, R., Hilmi, N., Jiao, N., Karim, M. S., Levin, L., O'Donoghue, S., Purca Cuicapusa, S. R., Rinkevich, B., Suga, T., Tagliabue, A., and Williamson, P.: Changing Ocean, Marine Ecosystems, and Dependent Communities. In: IPCC Special Report on the Ocean and Cryosphere in a Changing Climate, edited by: Pörtner, H.-O., Roberts, D. C., Masson-Delmotte, V., Zhai, P., Tignor, M., Poloczanska, E., Mintenbeck, K., Alegría, A., Nicolai, M., Okem, A., Petzold, J., Rama, B., Weyer, N. M., in press., 2020.
  2. Bindoff, N. L., Willebrand, J., Artale, V., Cazenave, A., Gregory, J. M., Gulev, S., Hanawa, K., Le Quere, C., Levitus, S., Nojiri, Y., Shum, C. K., Talley, L. D., Unnikrishnan, A. S., Josey, S. A., Tamisiea, M., Tsimplis, M., and Woodworth, P.: Observations: oceanic climate change and sea level, in Climate change 2007: the physical science basis. Contribution of Working Group I, edited by: Solomon, S., Qin, D., Manning, M., Chen, Z., Marquis, M., Averyt, K. B., Tignor, M., Miller, H. L., Cambridge University Press, Cambridge, pp. 385–428, 2007.

Cited by

See all 897

Metadata

Authors
Kwiatkowski, L., Torres, O., Bopp, L., Aumont, O., Chamberlain, M., Christian, J. R., Dunne, J. P., Gehlen, M., Ilyina, T., John, J. G., Lenton, A., Li, H., Lovenduski, N. S., Orr, J. C., Palmieri, J., Santana-Falcón, Y., Schwinger, J., Séférian, R., Stock, C. A., Tagliabue, A., Takano, Y., Tjiputra, J., Toyama, K., Tsujino, H., Watanabe, M., Yamamoto, A., Yool, A., & Ziehn, T.
Affiliations
  • Centre National de la Recherche Scientifique (FR)
  • CSIRO Oceans and Atmosphere (AU)
  • Fisheries and Oceans Canada (CA)
  • National Oceanic and Atmospheric Administration (US)
  • Max Planck Institute for Meteorology (DE)
  • Institute of Arctic and Alpine Research (US)
  • Bjerknes Centre for Climate Research (NO)
  • University of Liverpool (GB)
  • Los Alamos National Laboratory (US)
  • Japan Meteorological Agency (JP)
  • Japan Agency for Marine-Earth Science and Technology (JP)
  • National Oceanography Centre (GB)
Corresponding author
  • Kwiatkowski, Lester
  • Chamberlain, Matthew
  • Gehlen, Marion
  • Ilyina, Tatiana
  • John, Jasmin G.
  • Li, Hongmei
  • Lovenduski, Nicole S.
  • Orr, James C.
  • Schwinger, Jörg
  • Tjiputra, Jerry
  • Tsujino, Hiroyuki
  • Watanabe, Michio
  • Yamamoto, Akitomo
  • Yool, Andrew
  • Ziehn, Tilo
Venue
Biogeosciences
Published
2020-07-06
Volume
17
Issue
13
Pages
3439-3470
ISSN
  • 1726-4170 (ISSN-L)
  • 1726-4189
OpenAlex
W3040588293
Cited by
897
References
178
Citations by year
2026: 107 · 2025: 165 · 2024: 171 · 2023: 211 · 2022: 138 · 2021: 95 · 2020: 9
FWCI
54.34
Type
journal article
Language
en
Open access
Locations
  • Biogeosciences (publishedVersion, cc-by)
  • UTAS Research Repository (acceptedVersion)
  • NERC Open Research Archive (Natural Environment Research Council) (acceptedVersion)
  • HAL (submittedVersion, other-oa)
  • Acceda (Universidad de Las Palmas de Gran Canaria) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Figshare (submittedVersion)
  • NOAA Institutional Repository (submittedVersion)
  • NOAA Institutional Repository (submittedVersion, cc-by)
  • MPG.PuRe (Max Planck Society) (submittedVersion, other-oa)
Funders
  • Horizon 2020
  • National Science Foundation (OCE-1752724, OCE-1558225)
  • Agence Nationale de la Recherche (ANR-18-ERC2-0001-01)
Topics
  • Physical Sciences › Earth and Planetary Sciences › Oceanography › Marine Plankton and Biogeochemistry
  • Physical Sciences › Earth and Planetary Sciences › Oceanography › Ocean Acidification Effects and Responses
  • Physical Sciences › Earth and Planetary Sciences › Oceanography › Oceanographic and Atmospheric Processes
Keywords
ocean warming, ocean acidification, ocean deoxygenation, sea surface temperature, surface pH, subsurface oxygen, nitrate, upper ocean stratification, climate sensitivity, Shared Socioeconomic Pathways, SSP5-8.5, SSP1-2.6

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Twenty-first century ocean warming, acidification, deoxygenation, and upper-ocean nutrient and primary production decline from CMIP6 model projections. https://app.cochat.ai/papers/10.5194/bg-17-3439-2020
The paper
Kwiatkowski, L., Torres, O., Bopp, L., Aumont, O., Chamberlain, M., Christian, J. R., Dunne, J. P., Gehlen, M., Ilyina, T., John, J. G., Lenton, A., Li, H., Lovenduski, N. S., Orr, J. C., Palmieri, J., Santana-Falcón, Y., Schwinger, J., Séférian, R., Stock, C. A., . . . Ziehn, T. (2020). Twenty-first century ocean warming, acidification, deoxygenation, and upper-ocean nutrient and primary production decline from CMIP6 model projections. Biogeosciences. https://doi.org/10.5194/bg-17-3439-2020

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.