The DOI matches its Crossref record; 115 of the 115 references it cites were found in a registry or an index.
Biomedical Magnesium Alloys: A Review of Material Properties, Surface Modifications and Potential as a Biodegradable Orthopaedic Implant
Open accessAbstract
Magnesium and magnesium based alloys are lightweight metallic materials that are extremely biocompatible and have similar mechanical properties to natural bone. These materials have the potential to function as an osteoconductive and biodegradable substitute in load bearing applications in the field of hard tissue engineering. However, the effects of corrosion and degradation in the physiological environment of the body has prevented their wide spread application to date. The aim of this review is to examine the properties, chemical stability, degradation in situ and methods of improving the corrosion resistance of magnesium and its alloys for potential application in the orthopaedic field. To be an effective implant, the surface and sub-surface properties of the material needs to be carefully selected so that the degradation kinetics of the implant can be efficiently controlled. Several surface modification techniques are presented and their effectiveness in reducing the corrosion rate and methods of controlling the degradation period are discussed. Ideally, balancing the gradual loss of material and mechanical strength during degradation, with the increasing strength and stability of the newly forming bone tissue is the ultimate goal. If this goal can be achieved, then orthopaedic implants manufactured from magnesium based alloys have the potential to deliver successful clinical outcomes without the need for revision surgery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biomechanics. Mechanical Properties of Living Tissues
Fung, Y. C., & Skalak, R. (1982) · Journal of Applied Mechanics · doi:10.1115/1.3162171 · Cited by 6,025
A review of chitin and chitosan applications
Ravi Kumar, M. N. V. (2000) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(00)00038-9 · Cited by 6,009
Bioceramics: From Concept to Clinic
Hench, L. L. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb07132.x · Cited by 4,977
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Titanium alloys in total joint replacement—a materials science perspective
Long, M., & Rack, H. J. (1998) · Biomaterials · doi:10.1016/s0142-9612(97)00146-4 · Cited by 3,510
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Protective coatings on magnesium and its alloys — a critical review
Gray, J. E., & Luan, B. (2002) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(01)01899-0 · Cited by 2,525
In vivo corrosion of four magnesium alloys and the associated bone response
Witte, F., Kaese, V., Haferkamp, H., Switzer, E., Meyer-Lindenberg, A., Wirth, C. J., & Windhagen, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.049 · Cited by 2,395
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
An Introduction to Bioceramics
Hench, L. L., & Wilson, J. (1993) · WORLD SCIENTIFIC eBooks · doi:10.1142/2028 · Cited by 2,307
Recent developments in polysaccharide-based materials used as adsorbents in wastewater treatment
Crini, G. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.11.002 · Cited by 2,183
Polyionic hydrocolloids for the intestinal delivery of protein drugs: alginate and chitosan—a review
George, M., & Abraham, T. E. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2006.04.017 · Cited by 2,012
Properties of Osteoconductive Biomaterials: Calcium Phosphates
LeGeros, R. Z. (2002) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-200202000-00009 · Cited by 1,987
Degradable biomaterials based on magnesium corrosion
Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R., & Feyerabend, F. (2008) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2009.04.001 · Cited by 1,820
The development of binary Mg–Ca alloys for use as biodegradable materials within bone
Li, Z., Gu, X., Lou, S., & Zheng, Y. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.021 · Cited by 1,593
Bone structure and formation: A new perspective
Olszta, M. J., Cheng, X., Jee, S. S., Kumar, R., Kim, Y.-Y., Kaufman, M. J., Douglas, E. P., & Gower, L. B. (2007) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2007.05.001 · Cited by 1,563
In vitro corrosion and biocompatibility of binary magnesium alloys
Gu, X., Zheng, Y., Cheng, Y., Zhong, S., & Xi, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.021 · Cited by 1,343
Biomedical coatings on magnesium alloys – A review
Hornberger, H., Virtanen, S., & Boccaccini, A. R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.012 · Cited by 1,273
Wei, G., & Ma, P. X. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.005 · Cited by 1,271
THE CHEMICAL DYNAMICS OF BONE MINERAL
NEUMAN, W. F., & NEUMAN, M. W. (1959) · The American Journal Of The Medical Sciences · doi:10.1097/00000441-195912000-00030 · Cited by 1,032
Hutmacher, D. W., Schantz, J. T., Lam, C. X. F., Tan, K. C., & Lim, T. C. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.24 · Cited by 1,007
Corrosion of Metal Orthopaedic Implants*
Jacobs, J. J., Gilbert, J. L., & Urban, R. M. (1998) · Journal of Bone and Joint Surgery · doi:10.2106/00004623-199802000-00015 · Cited by 967
A mineralogical perspective on the apatite in bone
Wopenka, B., & Pasteris, J. D. (2005) · Materials Science and Engineering: C · doi:10.1016/j.msec.2005.01.008 · Cited by 901
MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants
Zberg, B., Uggowitzer, P. J., & Löffler, J. F. (2009) · Nature Materials · doi:10.1038/nmat2542 · Cited by 899
Polysaccharides in colon-specific drug delivery
Sinha, V. R., & Kumria, R. (2001) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(01)00720-7 · Cited by 872
The use of titanium for medical applications in the USA
Wang, K. (1996) · Materials Science and Engineering A · doi:10.1016/0921-5093(96)10243-4 · Cited by 851
Makar, G. L., & Kruger, J. (1993) · International Materials Reviews · doi:10.1179/095066093790326320 · Cited by 803
Yang, L., & Zhang, L.-M. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.12.015 · Cited by 745
Development of nanocomposites for bone grafting
MURUGAN, R., & RAMAKRISHNA, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.07.022 · Cited by 742
Stress shielding and bone resorption in shoulder arthroplasty
Nagels, J., Stokdijk, M., & Rozing, P. M. (2003) · Journal of Shoulder and Elbow Surgery · doi:10.1067/mse.2003.22 · Cited by 707
Natural Polymers for Gene Delivery and Tissue Engineering
DANG, J., & LEONG, K. (2006) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2006.03.001 · Cited by 694
Progress and Challenge for Magnesium Alloys as Biomaterials
Zeng, R., Dietzel, W., Witte, F., Hort, N., & Blawert, C. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800035 · Cited by 680
Processing of biocompatible porous Ti and Mg
Wen, C. E., Mabuchi, M., Yamada, Y., Shimojima, K., Chino, Y., & Asahina, T. (2001) · Scripta Materialia · doi:10.1016/s1359-6462(01)01132-0 · Cited by 665
Davies, J. E. (1991) · University of Toronto Press eBooks · doi:10.3138/9781442671508 · Cited by 644
Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy
Ambat, R., Aung, N. N., & Zhou, W. (2000) · Corrosion Science · doi:10.1016/s0010-938x(99)00143-2 · Cited by 641
Aluminium and lead: molecular mechanisms of brain toxicity
Verstraeten, S. V., Aimo, L., & Oteiza, P. I. (2008) · Archives of Toxicology · doi:10.1007/s00204-008-0345-3 · Cited by 600
A review on magnesium alloys as biodegradable materials
Gu, X.-N., & Zheng, Y.-F. (2010) · Frontiers of Materials Science in China · doi:10.1007/s11706-010-0024-1 · Cited by 598
Landis, W. J., Song, M. J., Leith, A., McEwen, L., & McEwen, B. F. (1993) · Journal of Structural Biology · doi:10.1006/jsbi.1993.1003 · Cited by 596
Mechanical Properties of Collagen Fibrils
Wenger, M. P. E., Bozec, L., Horton, M. A., & Mesquida, P. (2007) · Biophysical Journal · doi:10.1529/biophysj.106.103192 · Cited by 566
Ceramic composites as matrices and scaffolds for drug delivery in tissue engineering
Habraken, W. J. E. M., Wolke, J. G. C., & Jansen, J. A. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.011 · Cited by 566
Biodegradable polymeric micelles composed of doxorubicin conjugated PLGA–PEG block copolymer
Yoo, H. S., & Park, T. G. (2001) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00340-0 · Cited by 538
Progress in the Field of Electrospinning for Tissue Engineering Applications
Agarwal, S., Wendorff, J. H., & Greiner, A. (2009) · Advanced Materials · doi:10.1002/adma.200803092 · Cited by 523
Nanocrystalline calcium phosphate ceramics in biomedical engineering
Kalita, S. J., Bhardwaj, A., & Bhatt, H. A. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.018 · Cited by 522
In vivo corrosion behavior of Mg‐Mn‐Zn alloy for bone implant application
Xu, L., Yu, G., Zhang, E., Pan, F., & Yang, K. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31273 · Cited by 520
Biomaterials: Principles and Applications
Park, J. B., & Bronzino, J. D. (2002) · CRC Press eBooks · doi:10.1201/9781420040036 · Cited by 514
Xu, L., Pan, F., Yu, G., Yang, L., Zhang, E., & Yang, K. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.001 · Cited by 505
Copper in disorders with neurological symptoms: Alzheimer’s, Menkes, and Wilson diseases
Strausak, D., Mercer, J. F. B., Dieter, H. H., Stremmel, W., & Multhaup, G. (2001) · Brain Research Bulletin · doi:10.1016/s0361-9230(01)00454-3 · Cited by 505
A Possible Biodegradable Magnesium Implant Material
Song, G., & Song, S. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200600252 · Cited by 487
Dong, Y., & Feng, S.-S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.055 · Cited by 468
Osteoinductive biomaterials—properties and relevance in bone repair
Habibovic, P., & de Groot, K. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.5 · Cited by 455
A Critical Review of the Stress Corrosion Cracking (SCC) of Magnesium Alloys
Winzer, N., Atrens, A., Song, G., Ghali, E., Dietzel, W., Kainer, K. U., Hort, N., & Blawert, C. (2005) · Advanced Engineering Materials · doi:10.1002/adem.200500071 · Cited by 451
Li, L., Gao, J., & Wang, Y. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2004.01.004 · Cited by 441
In vivo corrosion and corrosion protection of magnesium alloy LAE442☆
Witte, F., Fischer, J., Nellesen, J., Vogt, C., Vogt, J., Donath, T., & Beckmann, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.012 · Cited by 438
Biodegradable magnesium scaffolds: Part 1: Appropriate inflammatory response
Witte, F., Ulrich, H., Rudert, M., & Willbold, E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31170 · Cited by 409
Design of microencapsulated chitosan microspheres for colonic drug delivery
Lorenzo-Lamosa, M. L., Remuñán-López, C., Vila-Jato, J. L., & Alonso, M. J. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00203-4 · Cited by 402
Jagur‐Grodzinski, J. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.729 · Cited by 394
Electrodeposition of Ca–P coatings on biodegradable Mg alloy: In vitro biomineralization behavior☆
Song, Y., Zhang, S., Li, J., Zhao, C., & Zhang, X. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.020 · Cited by 385
A Pericellular Collagenase Directs the 3-Dimensional Development of White Adipose Tissue
Chun, T.-H., Hotary, K. B., Sabeh, F., Saltiel, A. R., Allen, E. D., & Weiss, S. J. (2006) · Cell · doi:10.1016/j.cell.2006.02.050 · Cited by 378
Fibrin gel – advantages of a new scaffold in cardiovascular tissue engineering
Jockenhoevel, S., Zund, G., Hoerstrup, S. P., Chalabi, K., Sachweh, J. S., Demircan, L., Messmer, B. J., & Turina, M. (2001) · European Journal of Cardio-Thoracic Surgery · doi:10.1016/s1010-7940(01)00624-8 · Cited by 362
Robinson, D. A., Griffith, R. W., Shechtman, D., Evans, R. B., & Conzemius, M. G. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.007 · Cited by 351
Rondeau, V., Jacqmin-Gadda, H., Commenges, D., Helmer, C., & Dartigues, J.-F. (2008) · American Journal of Epidemiology · doi:10.1093/aje/kwn348 · Cited by 338
Neuropathology of aluminum toxicity in rats (glutamate and GABA impairment)
El-Rahman, S. (2003) · Pharmacological Research · doi:10.1016/s1043-6618(02)00336-5 · Cited by 321
Ma, Z., Gao, C., Gong, Y., & Shen, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.031 · Cited by 317
Biodegradable magnesium scaffolds: Part II: Peri‐implant bone remodeling
Witte, F., Ulrich, H., Palm, C., & Willbold, E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31293 · Cited by 312
Wen, C., Guan, S., Peng, L., Ren, C., Wang, X., & Hu, Z. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2008.09.078 · Cited by 312
Biomedical application of functional polymers
Jagur-Grodzinski, J. (1999) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(98)00054-6 · Cited by 297
Lhotka, C., Szekeres, T., Steffan, I., Zhuber, K., & Zweymüller, K. (2003) · Journal of Orthopaedic Research® · doi:10.1016/s0736-0266(02)00152-3 · Cited by 289
Biodegradable Magnesium Alloys: A Review of Material Development and Applications
Persaud-Sharma, D., & McGoron, A. (2012) · Journal of Biomimetics, Biomaterials and Tissue Engineering · doi:10.4028/www.scientific.net/jbbte.12.25 · Cited by 287
Qiao, M., Chen, D., Ma, X., & Liu, Y. (2005) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2005.01.017 · Cited by 277
Structure and function of bone collagen fibrils
Katz, E. P., & Li, S.-T. (1973) · Journal of Molecular Biology · doi:10.1016/0022-2836(73)90230-1 · Cited by 265
The anatomy and biology of the human skeleton
(1989) · Choice Reviews Online · doi:10.5860/choice.26-3277 · Cited by 260
Preparation of γ-PGA/chitosan composite tissue engineering matrices
Hsieh, C.-Y., Tsai, S.-P., Wang, D.-M., Chang, Y.-N., & Hsieh, H.-J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.012 · Cited by 255
Wang, X., Du, Y., Luo, J., Lin, B., & Kennedy, J. F. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.08.025 · Cited by 244
Dai, N.-T., Williamson, M. R., Khammo, N., Adams, E. F., & Coombes, A. G. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.11.022 · Cited by 239
Nakamura, Y. (1997) · Fundamental and Applied Toxicology · doi:10.1006/faat.1997.2322 · Cited by 234
Blends of synthetic and natural polymers as drug delivery systems for growth hormone
Cascone, M. G., Sim, B., & Sandra, D. (1995) · Biomaterials · doi:10.1016/0142-9612(95)91131-h · Cited by 222
Influence of titanium surfaces on attachment of osteoblast-like cells in vitro
Jayaraman, M., Meyer, U., Bühner, M., Joos, U., & Wiesmann, H.-P. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00571-4 · Cited by 219
Xu, L., Zhang, E., Yin, D., Zeng, S., & Yang, K. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3219-y · Cited by 209
Surface Modifications of Magnesium Alloys for Biomedical Applications
Yang, J., Cui, F., & Lee, I. S. (2011) · Annals of Biomedical Engineering · doi:10.1007/s10439-011-0300-y · Cited by 205
Aluminum-Induced neurotoxicity: Alterations in membrane function at the blood-brain barrier
Banks, W. A., & Kastin, A. J. (1989) · Neuroscience & Biobehavioral Reviews · doi:10.1016/s0149-7634(89)80051-x · Cited by 186
Manganese Transport and Trafficking: Lessons Learned from Saccharomyces cerevisiae
Culotta, V. C., Yang, M., & Hall, M. D. (2005) · Eukaryotic Cell · doi:10.1128/ec.4.7.1159-1165.2005 · Cited by 179
Liu, C., Xin, Y., Tang, G., & Chu, P. K. (2007) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.12.020 · Cited by 176
Thacharodi, D., & Rao, K. P. (1995) · Biomaterials · doi:10.1016/0142-9612(95)98278-m · Cited by 174
Deformation and damage upon stretching of degradable polymers (PLA and PCL)
Rezgui, F., Swistek, M., Hiver, J. M., G'Sell, C., & Sadoun, T. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.116 · Cited by 171
Halbleib, M., Skurk, T., de Luca, C., von Heimburg, D., & Hauner, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00156-x · Cited by 163
Synthesis and in vitro evaluation of thiolated hyaluronic acid for mucoadhesive drug delivery
Kafedjiiski, K., Jetti, R. K. R., Föger, F., HOYER, H., Werle, M., Hoffer, M. H., & Bernkop‐Schnürch, A. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2007.04.019 · Cited by 157
Kanczler, J. M., Ginty, P. J., Barry, J. J. A., Clarke, N. M. P., Howdle, S. M., Shakesheff, K. M., & Oreffo, R. O. C. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.031 · Cited by 152
Rodan, G. A. (1998) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.95.23.13361 · Cited by 148
Tomozawa, M., & Hiromoto, S. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.04.087 · Cited by 146
Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering
Wang, Y.-C., Lin, M.-C., Wang, D., & Hsieh, H. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00434-9 · Cited by 143
Albumin adsorption on metal surfaces
Williams, R., & Williams, D. F. (1988) · Biomaterials · doi:10.1016/0142-9612(88)90085-3 · Cited by 134
Preparation of MPEG–PLA nanoparticle for honokiol delivery in vitro
Zheng, X., Kan, B., Gou, M., Fu, S., Zhang, J., Men, K., Chen, L., Luo, F., Zhao, Y., Zhao, X., et al. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2009.11.014 · Cited by 132
In vitro study of GDNF release from biodegradable PLGA microspheres
Aubert‐Pouëssel, A., Venier‐Julienne, M., Clavreul, A., Sergent, M., Jollivet, C., Montero‐Menei, C. N., Garcion, E., Bibby, D. C., Meneï, P., & Benoît, J. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2003.12.012 · Cited by 129
Reconstructing the human body using biomaterials
Agrawal, C. M. (1998) · JOM · doi:10.1007/s11837-998-0064-5 · Cited by 127
Reduction of surface-induced inflammatory reaction on PLGA/MPC polymer blend
Iwasaki, Y., Sawada, S., Ishihara, K., Khang, G., & Lee, H. B. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00135-7 · Cited by 123
Müller, W. D., Nascimento, M. L., Zeddies, M., Córsico, M., Gassa, L. M., & de Mele, M. F. L. (2007) · Materials Research · doi:10.1590/s1516-14392007000100003 · Cited by 114
Kranz, H., & Bodmeier, R. A. (2008) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2008.03.004 · Cited by 112
Controlling the biodegradation rate of magnesium using biomimetic apatite coating
Zhang, Y., Zhang, G., & Wei, M. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31228 · Cited by 111
The Structure of Mineralized Collagen Fibrils
Katz, E. P., Wachtel, E. J., Yamauchi, M., & Mechanic, G. L. (1989) · Connective Tissue Research · doi:10.3109/03008208909050005 · Cited by 104
Fractionation and characterization of polysaccharides from abaca fibre
Sun, R., Fang, J., Goodwin, A., Lawther, J. M., & Bolton, A. J. (1998) · Carbohydrate Polymers · doi:10.1016/s0144-8617(98)00046-0 · Cited by 103
Wang, Y., Wei, M., & Gao, J. (2008) · Materials Science and Engineering C · doi:10.1016/j.msec.2008.09.051 · Cited by 101
Enhanced growth of animal and human endothelial cells on biodegradable polymers
Chu, C. F. L., Lu, A., Liszkowski, M., & Sipehia, R. (1999) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/s0304-4165(99)00151-8 · Cited by 96
Li, Y., Nothnagel, J., & Kissel, T. (1997) · Polymer · doi:10.1016/s0032-3861(97)00178-x · Cited by 87
Hellmich, C., & Ulm, F. (2003) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-002-0025-9 · Cited by 83
Ramakrishna, S., Ramalingam, M., Kumar, T. G., & Soboyejo, W. O. (2010) · Journal of International Crisis and Risk Communication Research · Cited by 72
Chen, J., Tian, B., Yin, X. Y., Zhang, Y., Hu, D., Hu, Z., Liu, M., Pan, Y., Zhao, J., Li, H., et al. (2007) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2007.02.007 · Cited by 65
Evaluation of PLLA–collagen hybrid sponge as a scaffold for cartilage tissue engineering
Sato, T., Chen, G., Ushida, T., Ishii, T., Ochiai, N., Tateishi, T., & Tanaka, J. (2004) · Materials Science and Engineering C · doi:10.1016/j.msec.2003.12.010 · Cited by 65
Stress corrosion cracking in magnesium alloys: Characterization and prevention
Winzer, N., Atrens, A., Dietzel, W., Song, G., & Kainer, K. U. (2007) · JOM · doi:10.1007/s11837-007-0104-6 · Cited by 50
Calcium–phosphate coatings obtained biomimetically on magnesium substrates under low magnetic field
Yanovska, A., Кузнецов, В. Н., Stanislavov, A. S., Danilchenko, S. N., & Sukhodub, L. F. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.05.052 · Cited by 47
Wang, Z., Wang, S., Marois, Y., Guidoin, R., & Zhang, Z. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.058 · Cited by 46
Chemical Modification of Metallic Implant Surfaces with Biofunctional Proteins
Endo, K. (1995) · Dental Materials Journal · doi:10.4012/dmj.14.199 · Cited by 44
Lee, J.-J., Lee, S.-G., Park, J., et al. (2007) · Current Applied Physics · doi:10.1016/j.cap.2006.11.011 · Cited by 42
Adams, J. C., & Livingstone, C. (1961) · Southern Medical Journal · doi:10.1097/00007611-196106000-00036 · Cited by 40
Polymers for tissue engineering
Baldwin, S. P., & Saltzman, W. M. (1996) · Trends in polymer science · Cited by 35
Cited by
Recent advances on the development of magnesium alloys for biodegradable implants
Chen, Y., Xu, Z., Smith, C., & Sankar, J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.07.005 · Cited by 1,236
Agarwal, S., Curtin, J., Duffy, B., & Jaiswal, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.020 · Cited by 955
Biodegradable Mg alloys for orthopedic implants – A review
Tsakiris, V., Tardei, C., & Clicinschi, F. M. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.06.024 · Cited by 612
Insight of magnesium alloys and composites for orthopedic implant applications – a review
Radha, R., & Sreekanth, D. (2017) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2017.08.003 · Cited by 533
Ding, Y., Wen, C., Hodgson, P., & Li, Y. (2014) · J. Mater. Chem. B · doi:10.1039/c3tb21746a · Cited by 531
Metadata
- Authors
- Eddy Jai Poinern, G., Brundavanam, S., & Fawcett, D.
- Venue
- American Journal of Biomedical Engineering
- Publisher
- Scientific and Academic Publishing
- Published
- 2013-01-07
- Volume
- 2
- Issue
- 6
- Pages
- 218-240
- ISSN
- 2163-1050 (ISSN-L)
- OpenAlex
- W2112850399
- Cited by
- 361
- References
- 115
- FWCI
- 6.47
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.