The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
Open accessAbstract
Additive manufacturing techniques can produce complex, high-value metal parts, with potential applications as critical metal components such as those found in aerospace engines and as customized biomedical implants. Material porosity in these parts is undesirable for aerospace parts - since porosity could lead to premature failure - and desirable for some biomedical implants - since surface-breaking pores allows for better integration with biological tissue. Changes in a part's porosity during an additive manufacturing build may also be an indication of an undesired change in the build process. Here, we present efforts to develop an ultrasonic sensor for monitoring changes in the porosity in metal parts during fabrication on a metal powder bed fusion system. The development of well-characterized reference samples, measurements of the porosity of these samples with multiple techniques, and correlation of ultrasonic measurements with the degree of porosity are presented. A proposed sensor design, measurement strategy, and future experimental plans on a metal powder bed fusion system are also presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Introduction to Percolation Theory
Stauffer, D., Aharony, A., & Redner, S. (1993) · Physics Today · doi:10.1063/1.2808877 · Cited by 6,666
Principles of Computerized Tomographic Imaging
Kak, A. C., & Slaney, M. (2001) · doi:10.1137/1.9780898719277 · Cited by 5,809
Micromechanics of defects in solids
Mura, T. (1987) · Mechanics of Elastic and Inelastic Solids · doi:10.1007/978-94-009-3489-4 · Cited by 5,539
Guidelines for evaluating and expressing the uncertainty of NIST measurement results
Taylor, B. N. (1994) · National Institute of Standards and Technology, NIST Technical Note 1297 · doi:10.6028/nist.tn.1297 · Cited by 2,833
Guidelines for evaluating and expressing the uncertainty of NIST measurement results
Taylor, B. N., & Kuyatt, C. E. (2018) · doi:10.6028/nist.tn.1297-1993 · Cited by 2,582
An Introduction To Percolation Theory
Hughes, B. D. (1996) · Random Walks and Random Environments · doi:10.1093/oso/9780198537892.003.0002 · Cited by 1,731
Mechanics of Composite Materials
Jones, R. M. (2018) · CRC Press eBooks · doi:10.1201/9781498711067 · Cited by 1,509
The future of dental devices is digital
van Noort, R. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.014 · Cited by 1,408
A Course in Theoretical Physics
SHEPHERD, P. J. (2013) · Wiley eBooks · doi:10.1002/9781118516911 · Cited by 886
CT artifacts: causes and reduction techniques
Boas, F. E., & Fleischmann, D. (2012) · Imaging in Medicine · doi:10.2217/iim.12.13 · Cited by 848
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Comparison of density measurement techniques for additive manufactured metallic parts
Spierings, A. B., Schneider, M., & Eggenberger, R. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156504 · Cited by 613
Characterization of Metal Powders Used for Additive Manufacturing
Slotwinski, J. A., Garboczi, E. J., Stutzman, P. E., Ferraris, C. F., Watson, S. S., & Peltz, M. A. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.018 · Cited by 506
Self-citationGirardin, E., Renghini, C., Dyson, J., Calbucci, V., Moroncini, F., & Albertini, G. (2011) · Materials Sciences and Applications · doi:10.4236/msa.2011.29180 · Cited by 23
Ultrasonic Measurement of the Dynamic Elastic Moduli of Small Metal Samples
Slotwinski, J., & Blessing, G. (1999) · Journal of Testing and Evaluation · doi:10.1520/jte12056j · Cited by 10
Self-citation
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Sanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
“Because of this, porosity has been widely investigated in PBF (e.g., in Gu et al ., 2013; Slotwinski et al., 2014; Weingarten et al., 2015).”
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Metadata
- Authors
- Slotwinski, J. A., Garboczi, E. J., & Hebenstreit, K. M.
- Venue
- Journal of Research of the National Institute of Standards and Technology
- Published
- 2014-10
- Volume
- 119
- Pages
- 494
- ISSN
- 1044-677X (ISSN-L)
- 2165-7254
- OpenAlex
- W2333204874
- Cited by
- 408
- References
- 16
- FWCI
- 14.80
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.