Lee, Kwan-Soo

A one-dimensional model for frost formation on a cold flat surface

Lee, K.-S., Kim, W.-S., & Lee, T.-H. (1997) · International Journal of Heat and Mass Transfer

Icing and De-icing TechnologiesRefrigeration and Air Conditioning Technologies

Cited by 296

Prediction of the frost formation on a cold flat surface

Lee, K.-S., Jhee, S., & Yang, D.-K. (2003) · International Journal of Heat and Mass Transfer

Icing and De-icing TechnologiesRefrigeration and Air Conditioning Technologies

Cited by 190

Frosting characteristics on hydrophobic and superhydrophobic surfaces: A review

Kim, M.-H., Kim, H., Lee, K.-S., & Kim, D. R. (2017) · Energy Conversion and Management

Icing and De-icing TechnologiesSurface Modification and Superhydrophobicity

Cited by 171

Effect of surface treatments on the frosting/defrosting behavior of a fin-tube heat exchanger

Jhee, S., Lee, K.-S., & Kim, W.-S. (2002) · International Journal of Refrigeration

Refrigeration and Air Conditioning TechnologiesHeat Transfer and Optimization

Cited by 149

Correlations and optimization of a heat exchanger with offset-strip fins

Kim, M.-S., Lee, J., Yook, S.-J., & Lee, K.-S. (2011) · International Journal of Heat and Mass Transfer

Heat Transfer and OptimizationHeat Transfer Mechanisms

Cited by 144

Dimensionless correlations of frost properties on a cold plate

Yang, D.-K., & Lee, K.-S. (2004) · International Journal of Refrigeration

Refrigeration and Air Conditioning TechnologiesIcing and De-icing Technologies

Cited by 134

Frosting model for predicting macroscopic and local frost behaviors on a cold plate

Kim, D., Kim, C., & Lee, K.-S. (2015) · International Journal of Heat and Mass Transfer

Icing and De-icing TechnologiesRefrigeration and Air Conditioning Technologies

Cited by 103

Modeling for predicting frosting behavior of a fin–tube heat exchanger

Yang, D.-K., Lee, K.-S., & Song, S. (2006) · International Journal of Heat and Mass Transfer

Heat Transfer and OptimizationIcing and De-icing Technologies

Cited by 94

Frosting and defrosting characteristics of surface-treated louvered-fin heat exchangers: Effects of fin pitch and experimental conditions

Kim, K., & Lee, K.-S. (2013) · International Journal of Heat and Mass Transfer

Heat Transfer and OptimizationRefrigeration and Air Conditioning Technologies

Cited by 89

Fin spacing optimization of a fin-tube heat exchanger under frosting conditions

Yang, D.-K., Lee, K.-S., & Song, S. (2006) · International Journal of Heat and Mass Transfer

Heat Transfer and OptimizationRefrigeration and Air Conditioning Technologies

Cited by 81

Determination method of defrosting start-time based on temperature measurements

Kim, M.-H., & Lee, K.-S. (2015) · Applied Energy

Refrigeration and Air Conditioning TechnologiesAdsorption and Cooling Systems

Cited by 79

Modeling of frosting behavior on a cold plate

Yang, D.-K., & Lee, K.-S. (2005) · International Journal of Refrigeration

Refrigeration and Air Conditioning TechnologiesIcing and De-icing Technologies

Cited by 77

Frost growth mechanism and its behavior under ultra-low temperature conditions

Jeong, H., Byun, S., Kim, D. R., & Lee, K.-S. (2021) · International Journal of Heat and Mass Transfer

Icing and De-icing TechnologiesRefrigeration and Air Conditioning Technologies

Cited by 75

Frost formation on a cold surface under turbulent flow

Yang, D.-K., Lee, K.-S., & Cha, D.-J. (2006) · International Journal of Refrigeration

Refrigeration and Air Conditioning TechnologiesIcing and De-icing Technologies

Cited by 75

Performance prediction of a fin-and-tube heat exchanger considering air-flow reduction due to the frost accumulation

Ye, H.-Y., & Lee, K.-S. (2013) · International Journal of Heat and Mass Transfer

Refrigeration and Air Conditioning TechnologiesHeat Transfer and Optimization

Cited by 70

The behavior of frost layer growth under conditions favorable for desublimation

Lee, J., & Lee, K.-S. (2018) · International Journal of Heat and Mass Transfer

Icing and De-icing TechnologiesRefrigeration and Air Conditioning Technologies

Cited by 68

A novel louvered fin design to enhance thermal and drainage performances during periodic frosting/defrosting conditions

Kim, M.-H., Kim, H., Kim, D. R., & Lee, K.-S. (2016) · Energy Conversion and Management

Heat Transfer and OptimizationRefrigeration and Air Conditioning Technologies

Cited by 68

Thermal performance of microchannel heat exchangers according to the design parameters under the frosting conditions

Kim, K., Kim, M.-H., Kim, D. R., & Lee, K.-S. (2014) · International Journal of Heat and Mass Transfer

Heat Transfer and OptimizationRefrigeration and Air Conditioning Technologies

Cited by 64

Numerical modeling of frost growth and densification on a cold plate using frost formation resistance

Kim, C., Lee, J., & Lee, K.-S. (2017) · International Journal of Heat and Mass Transfer

Refrigeration and Air Conditioning TechnologiesIcing and De-icing Technologies

Cited by 63

Dimensionless correlations of frost properties on a cold cylinder surface

Kim, J.-S., Yang, D.-K., & Lee, K.-S. (2008) · International Journal of Heat and Mass Transfer

Icing and De-icing TechnologiesHeat Transfer and Optimization

Cited by 57

Frost modeling under cryogenic conditions

Byun, S., Jeong, H., Kim, D. R., & Lee, K.-S. (2020) · International Journal of Heat and Mass Transfer

Icing and De-icing TechnologiesRefrigeration and Air Conditioning Technologies

Cited by 56

Microscopic observation of frost behaviors at the early stage of frost formation on hydrophobic surfaces

Kim, H., Kim, D., Jang, H., Kim, D. R., & Lee, K.-S. (2016) · International Journal of Heat and Mass Transfer

Icing and De-icing TechnologiesSurface Modification and Superhydrophobicity

Cited by 53

Frosting behaviors and thermal performance of louvered fins with unequal louver pitch

Park, J.-S., Kim, D. R., & Lee, K.-S. (2016) · International Journal of Heat and Mass Transfer

Heat Transfer and OptimizationHeat Transfer Mechanisms

Cited by 51

Frost growth behavior according to the cold surface inclination angle

Kim, J., Byun, S., Lee, J., & Lee, K.-S. (2020) · International Journal of Heat and Mass Transfer

Icing and De-icing TechnologiesRefrigeration and Air Conditioning Technologies

Cited by 48