Dimensionless correlations of frost properties on a cold plate
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Yang and Lee [27] presented an experimental correlation for the average frost density as a function of the dimensionless temperature, humidity ratio, Reynolds number, and Fourier number.
“Yang and Lee [27] presented an experimental correlation for the average frost density as a function of the dimensionless temperature, humidity ratio, Reynolds number, and Fourier number.”
This correlation was further developed by Yang and Lee.
“This correlation was further developed by Yang and Lee [89].”
From Review on the measurement and calculation of frost characteristics (2018) · cites this paper as [89]
As evaluated by Léoni et al., Hermes et al. assumed that only mass diffusion occurs in the frost layer (0.5 exponents for time), contrary to Yang and Lee.
“As evaluated by Léoni et al. [118], Hermes et al. assumed that only mass diffusion occurs in the frost layer (0.5 exponents for the time) contrary to Yang and Lee [89].”
From Review on the measurement and calculation of frost characteristics (2018) · cites this paper as [89]
Yang and Lee's correlation [40] was very much similar to Mao et al.'s correlation [36], and the difference between the two was mainly due to frosting conditions.
“Yang and Lee ' s correlation [40] was very much similar to Mao et al. ' s correlation [36], and the difference between the two was mainly due to frosting condi tions.”
From Frosting mechanism and behaviors on surfaces with simple geometries: A state-of-the-art literature review (2022) · cites this paper as Yang and Lee [40]
Yang and Lee [40] believed that a dimensionless temperature based on air and cold surface temperatures can be used to replace frost surface temperature, and they presented a correlation of average frost density as a function of the dimensionless temperature, air moisture content, Reynolds number and heat transfer Fourier number.
“Yang and Lee [40] believed that a dimensionless temperature based on air and cold surface temperatures can be used to replace frost surface temperature, and they presented a correlation of average frost density as a function of the dimensionless temperature, air moisture content, Reynolds number and heat transfer Fourier number.”
From Frosting mechanism and behaviors on surfaces with simple geometries: A state-of-the-art literature review (2022) · cites this paper as Yang and Lee [40]
Cites
(1953) · Mechanical Engineering · Cited by 6,608 · see citing works
Kraus, A. D., Welty, J. R., & Aziz, A. (2011) · CRC Press eBooks · doi:10.1201/b12301-22 · Cited by 4,223 · see citing works
HAYHURST, A. N. (1997) · Food engineering series · doi:10.1007/978-1-4615-3864-6_3 · Cited by 999 · see citing works
Study of frost properties correlating with frost formation types
Hayashi, Y., Aoki, A., Adachi, S., & Hori, K. (1977) · Journal of Heat Transfer · doi:10.1115/1.3450675 · Cited by 402 · see citing works
Equation of the growth rate of frost forming on cooled surfaces
Schneider, H. W. (1978) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(78)90098-4 · Cited by 148 · see citing works
Frost deposition on cold surfaces
Brian, P. L. T., Reid, R. C., & Shah, Y. T. (1970) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160035a013 · Cited by 142 · see citing works
(1967) · ASHRAE winter conference papers · Cited by 128 · see citing works
Frost growth parameters in a forced air stream
Östin, R., & Andersson, S. (1991) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(91)90012-4 · Cited by 116 · see citing works
Measurement and Correlation of Water Frost Thermal Conductivity and Density
Biguria, G., & Wenzel, L. A. (1970) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160033a021 · Cited by 75 · see citing works
Study on Properties and Growth Rate of Frost Layers on Cold Surfaces
Tokura, I., Saito, H., & Kishinami, K. (1983) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3245679 · Cited by 50 · see citing works
(1999) · ASHRAE winter conference papers · Cited by 45 · see citing works
Frost Formation on Vertical Cylinders in Free Convection
Cremers, C. J., & Mehra, V. K. (1982) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3245065 · Cited by 41 · see citing works
(1994) · Cited by 28 · see citing works
Self-citationHeat and mass transfer under frosting conditions
Marinyuk, B. T. (1980) · International Journal of Refrigeration · doi:10.1016/0140-7007(80)90128-0 · Cited by 25 · see citing works
Correlations of Frost Properties Considering the Environmental Parameters over a Cold Flat Plate
(2001) · Transactions of the Korean Society of Mechanical Engineers B · doi:10.22634/ksme-b.2001.25.8.1046 · Cited by 6 · see citing works
Self-citationThe effect of environmental parameters on frost formation on a horizontal cylinder
Lee, Y.-B., Ryu, I.-S., & No, S.-T. (2002) · Transactions of the Korean Society of Mechanical Engineers B · doi:10.3795/ksme-b.2002.26.2.253 · Cited by 3 · see citing works
Flagged first, then by citations
2 of the 19 references couldn’t be matched to a known paper.
Cited by
Sorted by citations
A Review of Condensation Frosting
Nath, S., Ahmadi, S., & Boreyko, J. B. (2017) · Nanoscale and Microscale Thermophysical Engineering · doi:10.1080/15567265.2016.1256007 · Cited by 200 · see citing works
Review on the measurement and calculation of frost characteristics
Song, M., & Dang, C. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.03.094 · Cited by 212 · see citing works
Frost growth and densification in laminar flow over flat surfaces
Kandula, M. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.02.056 · Cited by 141 · see citing works
Shao, L.-L., Yang, L., & Zhang, C.-L. (2010) · Applied Energy · doi:10.1016/j.apenergy.2009.08.021 · Cited by 112 · see citing works
Frosting and defrosting characteristics of a fin according to surface contact angle
Kim, K., & Lee, K.-S. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.02.065 · Cited by 108 · see citing works
Self-citationFrosting model for predicting macroscopic and local frost behaviors on a cold plate
Kim, D., Kim, C., & Lee, K.-S. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.048 · Cited by 103 · see citing works
Self-citationState-of-the-art review of frost deposition on flat surfaces
Léoni, A., Mondot, M., Durier, F., Revellin, R., & Haberschill, P. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.04.004 · Cited by 103 · see citing works
Sommers, A. D., Gebhart, C. W., & Hermes, C. J. L. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.074 · Cited by 100 · see citing works
Modeling for predicting frosting behavior of a fin–tube heat exchanger
Yang, D.-K., Lee, K.-S., & Song, S. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.09.022 · Cited by 94 · see citing works
Self-citationCondensation frosting and passive anti-frosting
Yang, S., Wu, C., Zhao, G., Sun, J., Yao, X., Ma, X., & Wang, Z. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100474 · Cited by 92 · see citing works
A generalized simple model for predicting frost growth on cold flat plate
Wang, W., Guo, Q. C., Lu, W. P., Feng, Y. C., & Na, W. (2012) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2011.10.011 · Cited by 89 · see citing works
Patil, M. S., Seo, J.-H., & Lee, M.-Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.107 · Cited by 86 · see citing works
Bai, H., Liu, P., Alonso, M. J., & Mathisen, H. M. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112417 · Cited by 85 · see citing works
Sommers, A. D., Truster, N. L., Napora, A. C., Riechman, A. C., & Caraballo, E. J. (2016) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.01.008 · Cited by 84 · see citing works
Zhang, L., Song, M., Deng, S., Shen, J., & Dang, C. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118984 · Cited by 83 · see citing works
Fin spacing optimization of a fin-tube heat exchanger under frosting conditions
Yang, D.-K., Lee, K.-S., & Song, S. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.01.016 · Cited by 81 · see citing works
Self-citationModeling of frosting behavior on a cold plate
Yang, D.-K., & Lee, K.-S. (2005) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2004.08.001 · Cited by 77 · see citing works
Self-citationLéoni, A., Mondot, M., Durier, F., Revellin, R., & Haberschill, P. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2017.06.005 · Cited by 74 · see citing works
Li, L., Khodakarami, S., Yan, X., Rabbi, K. F., Günay, A. A., Stillwell, A., & Miljkovic, N. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201521 · Cited by 74 · see citing works
Experimental study of frost formation on cold surfaces with various fin layouts
Wu, X., Hu, S., & Chu, F. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.045 · Cited by 72 · see citing works
Xu, B., Han, Q., Chen, J., Li, F., Wang, N., Li, D., & Pan, X. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.09.026 · Cited by 71 · see citing works
A semi-empirical correlation for the frost density
Hermes, C. J. L., Loyola, F. R., & Nascimento, V. S. (2014) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2014.02.008 · Cited by 69 · see citing works
The behavior of frost layer growth under conditions favorable for desublimation
Lee, J., & Lee, K.-S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.039 · Cited by 68 · see citing works
Self-citationFrost formation from general-low to ultra-low temperatures: A review
Byun, S., Jeong, H., Son, H., Kim, D. R., & Lee, K.-S. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123164 · Cited by 65 · see citing works
Self-citationKim, K., Kim, M.-H., Kim, D. R., & Lee, K.-S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.060 · Cited by 64 · see citing works
Self-citationFrost layer growth behavior under cryogenic conditions
Lee, J., Jeong, H., Kim, D. R., & Lee, K.-S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114333 · Cited by 60 · see citing works
Self-citationA semi-empirical correlation for the thermal conductivity of frost
Negrelli, S., & Hermes, C. J. L. (2015) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2015.05.021 · Cited by 59 · see citing works
Dimensionless correlations of frost properties on a cold cylinder surface
Kim, J.-S., Yang, D.-K., & Lee, K.-S. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.01.007 · Cited by 57 · see citing works
Self-citationKim, H., Kim, D., Jang, H., Kim, D. R., & Lee, K.-S. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.02.020 · Cited by 53 · see citing works
Self-citationNumerical simulation of frosting behavior and its effect on a direct-contact ambient air vaporizer
Kuang, Y.-W., Yi, C., & Wang, W. (2015) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2015.06.042 · Cited by 45 · see citing works
Hu, B., Wang, X., Cao, F., He, Z., & Xing, Z. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.07.017 · Cited by 50 · see citing works
Robust predictive models for estimating frost deposition on horizontal and parallel surfaces
Zendehboudi, A., & Li, X. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.05.013 · Cited by 49 · see citing works
Liu, S.-S., Jiao, W., Ren, L.-M., & Tian, X.-H. (2020) · Renewable Energy · doi:10.1016/j.renene.2019.10.072 · Cited by 42 · see citing works
Liu, X., Yu, J., & Yan, G. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114634 · Cited by 47 · see citing works
Experimental investigation of frost retardation for superhydrophobic surface using a luminance meter
Kim, D., Kim, H., Kim, S. W., Kim, D. R., & Lee, K.-S. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.04.042 · Cited by 46 · see citing works
Self-citationKim, K., Kim, D. R., & Lee, K.-S. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.05.027 · Cited by 46 · see citing works
Self-citationControl strategy and experimental study on a novel defrosting method for air-source heat pump
Liang, C., Zhang, X., Li, X., & Chen, Z. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.12.022 · Cited by 44 · see citing works
A Semi-Empirical Model for Predicting Frost Properties
Li, S.-M., Yang, K., & Wang, C. (2021) · Processes · doi:10.3390/pr9030412 · Cited by 42 · see citing works
Experimental study of frost formation on a fin-and-tube heat exchanger by natural convection
Amini, M., Pishevar, A. R., & Yaghoubi, M. (2014) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2014.06.015 · Cited by 40 · see citing works
Tahavvor, A., & Yaghoubi, M. (2010) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2010.06.004 · Cited by 35 · see citing works
Huang, J.-M., Hsieh, W.-C., Ke, X.-J., & Wang, C.-C. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.06.020 · Cited by 41 · see citing works
An experimental study on frosting of laminar air flow on a cold surface with local cooling
Kwon, J.-T., Lim, H. J., Kwon, Y.-C., Koyama, S., Kim, D.-H., & Kondou, C. (2006) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2005.12.009 · Cited by 35 · see citing works
Moradkhani, M., Hosseini, S. H., Valizadeh, M., & Song, M. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105667 · Cited by 32 · see citing works
Sommers, A. D., Napora, A. C., Truster, N. L., Caraballo, E. J., & Hermes, C. J. L. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.10.025 · Cited by 33 · see citing works
Moradkhani, M., Hosseini, S. H., Lei, S., & Song, M. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119258 · Cited by 30 · see citing works
Chen, G., Deng, X., Zhang, G., & Yan, X. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.133 · Cited by 31 · see citing works
Modeling of the frost deposition by natural convection on horizontal ultra-low-temperature surfaces
Zendehboudi, A., & Hosseini, S. H. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08087-x · Cited by 26 · see citing works
Byun, S., Jeong, H., Hyeon, S., & Lee, K.-S. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111186 · Cited by 31 · see citing works
Self-citationWei, W.-Z., Guo, Y.-T., Wang, W., Jiang, Z., Zhang, X., Dai, C.-M., Sun, Y.-Y., Li, B., Wang, S.-Q., & Zhang, C.-X. (2026) · Energy · doi:10.1016/j.energy.2025.139859 · Cited by 34 · see citing works
Evaporator Frosting in Refrigerating Appliances: Fundamentals and Applications
Hermes, C., Boeng, J., da Silva, D. D., Knabben, F. T., & Sommers, A. (2021) · Energies · doi:10.3390/en14185991 · Cited by 26 · see citing works
Real-time frost porosity detection using capacitance sensing approach
Shen, Y., & Wang, X. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.060 · Cited by 26 · see citing works
Hosseini, S. H., Moradkhani, M., Valizadeh, M., & Ahmadi, G. (2021) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2020.12.035 · Cited by 25 · see citing works
Hosseini, S., Rezaei, M., Bag-Mohammadi, M., Zendehboudi, A., & Ahmadi, G. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.022 · Cited by 26 · see citing works
Characteristics of frost formation on two-dimensional fins and its empirical correlations
Kim, K., Kim, J.-S., & Lee, K.-S. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.02.043 · Cited by 25 · see citing works
Self-citationLocal frost behaviors of a scaled-up louvered fin heat exchanger
Park, J.-S., Kim, D. R., & Lee, K.-S. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.06.025 · Cited by 24 · see citing works
Self-citationReview and prospect of air source heat pump research: A bibliometric insight
Jiang, S., Zhao, H., & Ni, L. (2024) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2024.11.029 · Cited by 20 · see citing works
A novel defrosting control strategy with image processing technique and fractal theory
Miao, H.-F., Yang, X., Yin, D.-Z., Zheng, W.-D., Zhang, H., Zhang, S., & Liu, Z. (2022) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2022.03.002 · Cited by 24 · see citing works
Experimental study of the characteristic of frosting on low-temperature air cooler
Haijie, Q., Li, W., Bo, D., Zhihai, Z., & Weiying, Z. (2014) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2014.02.021 · Cited by 22 · see citing works
Chen, J., Wu, J., He, J., & Guo, Z. (2022) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2021.11.008 · Cited by 20 · see citing works
Ren, L.-M., Jiao, W., Tian, G., Tian, X.-H., & Liu, S.-S. (2021) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2021.04.035 · Cited by 15 · see citing works
Liang, X.-Y., & Wu, L. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.112366 · Cited by 18 · see citing works
Modeling and Analysis of Frost Growth in Pilot-Scale Ambient Air Vaporizer
Lee, Y.-K., Park, J., & Han, C. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b03480 · Cited by 19 · see citing works
Lai, T., Ding, P., Dong, X., Zhang, B., Chen, X., & Hou, Y. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115075 · Cited by 18 · see citing works
Farzaneh, M., Zgheib, N., Sherif, S. A., & Balachandar, S. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123233 · Cited by 15 · see citing works
Experimental investigation of frost formation on a horizontal cold cylinder under cross flow
Barzanoni, Y., Noorshams, O., Tabrizi, H., & Damangir, E. (2011) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2011.02.011 · Cited by 16 · see citing works
General correlation for frost thermal conductivity on parallel surface channels
Hosseini, S. H., Valizadeh, M., Zendehboudi, A., & Song, M. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110282 · Cited by 17 · see citing works
Analysis of Thermal Conductivity of Frost on Cryogenic Finned-tube Vaporizer Using Fractal Method
Chen, S.-P., Yao, S.-T., & Xie, F.-S. (2013) · Energy and Power Engineering · doi:10.4236/epe.2013.54b021 · Cited by 13 · see citing works
Schmiesing, N. C., & Sommers, A. D. (2017) · Science and Technology for the Built Environment · doi:10.1080/23744731.2017.1333876 · Cited by 17 · see citing works
Yang, X., Liu, X., Dong, X.-J., Meng, Y., Hou, Y., & Lai, T.-W. (2022) · Energy Storage and Saving · doi:10.1016/j.enss.2022.05.001 · Cited by 16 · see citing works
Rapid deposition analysis of inhaled aerosols in human airways
Sadafi, H., Backer, W. D., Krestin, G., & Backer, J. D. (2024) · Scientific Reports · doi:10.1038/s41598-024-75578-9 · Cited by 16 · see citing works
A predictive model of frost formation on leaf surface and estimation of frost amount
Song, H., & Hu, Y.-G. (2023) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2023.102789 · Cited by 14 · see citing works
Moradkhani, M., Gao, R.-M., Hosseini, S. H., & Song, M. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122090 · Cited by 11 · see citing works
Frost layer thickness measurement and calculation: A short review
Song, M., Dang, C., Liu, S.-C., Sun, Z.-L., & Mao, N. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.12.281 · Cited by 13 · see citing works
Zhang, W., Li, W., & Hrnjak, P. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121892 · Cited by 13 · see citing works
Experimental Study of Frost Growth Characteristics on Surface of Fin-tube Heat Exchanger
Liping, X., Xianmin, G., & Xing, Z. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1039 · Cited by 13 · see citing works
EFFECTIVE THERMAL CONDUCTIVITY OF FROST CONSIDERINGMASS DIFFUSION AND EDDY CONVECTION
Kandula, M. (2010) · Special Topics & Reviews in Porous Media - An International Journal · doi:10.1615/specialtopicsrevporousmedia.v1.i4.40 · Cited by 10 · see citing works
Correlation for frost properties on a cold cylinder surface in cross flow
Barzanoni, Y., Tabrizi, H. B., Noorshams, O., & Eftekhari, H. (2012) · Heat and Mass Transfer · doi:10.1007/s00231-012-0993-y · Cited by 10 · see citing works
Juhola, V., Mikkola, V., Inkeri, E., Kabelac, S., & Tynjälä, T. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.127396 · Cited by 9 · see citing works
Experimental investigation on thermal conductivity of cryogenic frost under forced convection
Jeong, H., Son, H., Byun, S., Hyeon, S., Lee, K.-S., & Kim, D. R. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124504 · Cited by 9 · see citing works
Self-citationAn intelligent strategy for phase change heat and mass transfer: Application of machine learning
Khodakarami, S., Suh, Y., Won, Y., & Miljkovic, N. (2023) · Advances in heat transfer · doi:10.1016/bs.aiht.2023.05.002 · Cited by 9 · see citing works
An experimental study of heat transfer on a tube bank under frost formation conditions
Ramírez-Hernández, H. G., Sánchez-Cruz, F. A., Solorio-Ordaz, F., & Martínez-Martínez, S. (2019) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2019.01.031 · Cited by 9 · see citing works
Ye, H.-Y., Shu, W.-H., Qi, Y., Fang, S., Zhu, S.-L., Jiang, H., Zhi, X., Qiu, L.-M., & Wang, K. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2024.126355 · Cited by 8 · see citing works
Time scaling of frost accretion and the square-root-of-time rule
Hermes, C., Sommers, A., & Barbosa, J. (2019) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2019.104281 · Cited by 8 · see citing works
Prediction of heat and mass transfer inside 3D frost microstructure
Mao, N., Nishimura, K., Gong, J., Takayashiki, M., Ściążko, A., Komatsu, Y., Tang, J., & Shikazono, N. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.122978 · Cited by 7 · see citing works
Adanur, B., Cremaschi, L., & Harges, E. (2019) · Science and Technology for the Built Environment · doi:10.1080/23744731.2019.1648981 · Cited by 8 · see citing works
Byun, S., Won, J., Song, J., Jeong, H., & Lee, K. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.108588 · Cited by 8 · see citing works
Self-citationDevelopment of a humidity pretreatment method for the measurement of ozone in ambient air.
Dinh, T., Kim, D.-J., Lee, J.-Y., Park, B.-G., Choi, I., Kim, I.-Y., & Kim, J.-C. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.128108 · Cited by 4 · see citing works
Simulation of Forced Convection Frost Formation in Microtubule Bundles at Ultra-Low Temperature
Mi, Y., Liu, M., Wu, H., Wang, J., & Zhao, R.-K. (2022) · Aerospace · doi:10.3390/aerospace9100630 · Cited by 5 · see citing works
Lai, T.-W., Liu, X., Dong, X.-J., Qiang, M.-C., Yan, S.-H., & Hou, Y. (2022) · Social Science Research Network · doi:10.3390/app12084025 · Cited by 6 · see citing works
Frost Layer Growth Based on High-Resolution Image Analysis
Janssen, D., Mohs, W. F., & Kulacki, F. A. (2016) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4032536 · Cited by 5 · see citing works
Ultra-efficient and ultra-rapid solar cell de-icing and de-snowing
Khodakarami, S., Li, L., & Miljkovic, N. (2021) · doi:10.1117/12.2598078 · Cited by 5 · see citing works
Boeng, J., & Stahelin, R. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.127327 · Cited by 6 · see citing works
A non-iterative solution for frost growth on flat surfaces
Hollon, D., Truster, N., Byrd, L., Roman, A. J., & Wolff, M. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124578 · Cited by 5 · see citing works
Li, S., Lin, B., Bai, X., Wei, P., Wang, L., & Zhang, R. (2025) · Energies · doi:10.3390/en18020302 · Cited by 4 · see citing works
Correlation of Critical Air Temperature for Frost Delay on a Cold Plate
Kim, J.-S., Kim, Y.-Y., Kim, O.-J., & Lee, K.-S. (2006) · Transactions of the Korean Society of Mechanical Engineers B · doi:10.3795/ksme-b.2006.30.12.1188 · Cited by 4 · see citing works
Self-citationEffect of frost on phosphorescence for thermographic phosphor thermometry
Kim, D., Kim, M., & Kim, K. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa8894 · Cited by 4 · see citing works
Kim, S.-J., Choi, H.-J., Ha, M.-Y., Kim, S.-R., & Bang, S.-W. (2010) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-010-0211-0 · Cited by 4 · see citing works
Recent advances in modelling of frost formation for mechanical systems
Tao, Y. (2025) · Philosophical transactions. Series A, Mathematical, physical, and engineering sciences · doi:10.1098/rsta.2024.0369 · Cited by 3 · see citing works
The effect of surface wettability on frost growth and densification on flat plates
ElCheikh, A. (2013) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 3 · see citing works
(2015) · Cited by 3 · see citing works
- Authors
- Yang, D.-K., & Lee, K.-S.
- Affiliations
- Hanyang University (KR)
- Corresponding author
- Lee, Kwan-Soo
- ORCID
- Lee, Kwan-Soo
- Venue
- International Journal of Refrigeration
- Publisher
- Elsevier BV
- Published
- 2004-01
- Volume
- 27
- Issue
- 1
- Pages
- 89-96
- ISSN
- 0140-7007 (ISSN-L)
- OpenAlex
- W2091126511
- Cited by
- 134
- References
- 19
- Citations by year
- 2026: 7 · 2025: 11 · 2024: 8 · 2023: 6 · 2022: 14 · 2021: 10 · 2020: 3 · 2019: 9 · 2018: 4 · 2017: 10 · 2016: 8 · 2015: 6 · 2014: 9 · 2013: 4 · 2012: 3
- FWCI
- 5.35
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Refrigeration (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Refrigeration and Air Conditioning Technologies
- Physical Sciences › Engineering › Aerospace Engineering › Icing and De-icing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Keywords
- frost formation, dimensionless correlation, frost thickness, frost density, effective thermal conductivity, heat transfer coefficient, mass transfer coefficient, air velocity, absolute humidity, dimensional analysis, frost prediction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
