The DOI matches its Crossref record.
Electrodeposition from Ionic Liquids
Open accessAbstract
Electrodeposition is an interesting and often used technique to deposit thin films of metals onto conducting substrates. During electrodepositio n, film properties such as morphology or composition can be adjusted by controlling process parameters such as bath composition, temperature and applied potential or current density. The electrodeposition of metals f rom ionic liquids has become a heavily studied topic in the last decade but still lots of challenges remain. This thesis investigates three main topics:1. The use of liquid metal salts to increase the solubility of metals in ionic liquids, hereby improving the mass transport2. Th e application of high vacuum as an environment for electrodeposition 3. Influence of rate constants in chloroaluminatesFurthermore, the f irst electrochemical oscillator in ionic liquids was discovered by seren dipity. The techniques, used in this PhD thesis, consist of Cyclic Volta mmetry (CV), Chronoamperometry, Scanning Electron Microscopy (SEM), Tran smission Electron Microscopy (TEM), Atomic Force Microscopy (AFM), Quart z Crystal Microbalance (QCM), Optical Spectroscopy, Raman Spectroscopy a nd Finite Element Modeling. The liquid metal salts tetrakis(acetonitrile) copper(I) bis(trifluoromet hylsulfonyl)imide ([Cu(MeCN)4][Tf2N]) and tetrakis(benzonitrile) copper( I) bis(trifluoromethylsulfonyl)imide ([Cu(PhCN)4][Tf2N]), bis(tetrakis(a cetonitrile) silver(I)) tris((trifluoromethylsulfonyl)imide) silver(I) ( [Ag(MeCN)4]2[Ag(Tf2N)3]) and bis(1-ethylimidazole) silver(I) bis(trifluo romethylsulfonyl)imide ([Ag(EtIm)2][Tf2N]) were electrochemically charac terized: for electrodeposition purposes, low melting salts with a cation ic complex are preferred over anionic complexes. The MeCN complexes are the easiest to be reduced and current densities up to 25 A dm−2 in unstirred solutions could be achieved. The resulting copper or silver d eposits, made at high current densities, have a smooth appearance, did n ot show cracks and were free from entrapped organic compounds. Lower cur rent densities result in nodular deposits. The use of thiourea or 1H-ben zotriazole as additive resulted in smooth morphologies at 1 A dm−2 . It is believed that excellent mass transport in this system is due to the high metal concentration and to the favorable electrostatic interact ions between the cationic electroactive species and the cathode. This ma kes the use of liquid metal salts with electrochemically active cationic complexes interesting for electrochemical applications where mass trans port is important. The fact that comparable results are obtained for two metals, indicates that the complexes with a metal center, surrounded by acetonitrile, lead to ionic liquids that can be used for high current d ensity electroplating. A second interesting property of liquid metal sal ts is that high overpotentials can be applied during electrodeposition. This leads to a small critical size for nucleation, which is advantageou s during the plating of copper on barrier materials such as tantalum. By using [Cu(MeCN)2][Tf2N] as medium for copper electrodeposition on a tantalum substrate, a nucleation density of 8e14 m−2 is reached. The resulting deposits contain very few pinholes and have thicknesses o f 19 nm. Electrochemical vacuum deposition is a technique which exploits the low vapor pressure of ionic liquids. In contrast with aqueous solutions or o rganic solvents, ionic liquids can be placed in a high vacuum environmen t, without noticeable loss of ionic liquid, to strongly decrease the amo unt of oxygen gas and water. Possible applications are the deposition of copper on tantalum, but results indicate that even at the low pressure of a high vacuum environment, the oxidation of tantalum cannot be avoide d. A finite element model of the electrodeposition of aluminium from chloro aluminate ionic liquids was made to study the influence of the rate cons tants kb and kf on the electrodeposition rate of aluminium. These rate c onstants determine the equilibrium between Al2Cl7−, AlCl4−, and Cl−. It was found that thermodynamics and kinetics change in o pposite directions for variations in kb or kf and these opposing effects lead to a minimum in the calculated current density as a function of kb . A comparison of the calculated data and the experimental limiting curr ent densities indicates that the value of kb lies between 1e−7.5 a nd 1e−6.7 m3 mol−1 s−1. Electrochemical oscillations are a phenomenon in which a constant applie d potential leads to an oscillating current or that a constant applied c urrent gives rise to an oscillating potential. A former type of electroc hemical oscillator was found in a mixture of monovalent with divalent co pper ions in 1-ethyl-3-methylimidazolium chloride. The oscillator is an N-NDR-type because the low frequency-end of the impedance spectrum has n egative real impedances and the steep decrease in current in the potenti al-current curve. The presence of chloride is also a nece
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Room-Temperature Ionic Liquids: Solvents for Synthesis and Catalysis. 2
Hallett, J. P., & Welton, T. (2011) · Chemical Reviews · doi:10.1021/cr1003248 · Cited by 12,578
Ionic-liquid materials for the electrochemical challenges of the future
Armand, M., Endres, F., MacFarlane, D. R., Ohno, H., & Scrosati, B. (2009) · Nature Materials · doi:10.1038/nmat2448 · Cited by 4,619
An ultrafast rechargeable aluminium-ion battery
Lin, M.-C., Gong, M., Lu, B., Wu, Y., Wang, D.-Y., Guan, M., Angell, M., Chen, C., Yang, J., Hwang, B.-J., et al. (2015) · Nature · doi:10.1038/nature14340 · Cited by 2,491
Structure and Nanostructure in Ionic Liquids
Hayes, R., Warr, G. G., & Atkin, R. (2015) · Chemical Reviews · doi:10.1021/cr500411q · Cited by 2,293
Ionic Liquids at Electrified Interfaces
Fedorov, M. V., & Kornyshev, A. A. (2014) · Chemical Reviews · doi:10.1021/cr400374x · Cited by 1,398
New Frontiers in Materials Science Opened by Ionic Liquids
Torimoto, T., Tsuda, T., Okazaki, K., & Kuwabata, S. (2010) · Advanced Materials · doi:10.1002/adma.200902184 · Cited by 869
Amarasekara, A. S. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00763 · Cited by 842
Preparation of Inorganic Materials Using Ionic Liquids
Ma, Z., Yu, J., & Dai, S. (2010) · Advanced Materials · doi:10.1002/adma.200900603 · Cited by 777
Multiscale Studies on Ionic Liquids
Dong, K., Liu, X., Dong, H., Zhang, X., & Zhang, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00776 · Cited by 773
Ionic liquids in analytical chemistry
Sun, P., & Armstrong, D. W. (2010) · Analytica Chimica Acta · doi:10.1016/j.aca.2009.12.007 · Cited by 727
Deep eutectic solvents for the production and application of new materials
Tomé, L. I. N., Baião, V., da Silva, W., & Brett, C. M. A. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2017.11.005 · Cited by 696
Lanthanides and Actinides in Ionic Liquids
Binnemans, K. (2007) · Chemical Reviews · doi:10.1021/cr050979c · Cited by 672
Ionic liquids and their solid-state analogues as materials for energy generation and storage
MacFarlane, D. R., Forsyth, M., Howlett, P. C., Kar, M., Passerini, S., Pringle, J. M., Ohno, H., Watanabe, M., Yan, F., Zheng, W., et al. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.5 · Cited by 666
Effect of Water on the Electrochemical Window and Potential Limits of Room-Temperature Ionic Liquids
O’Mahony, A. M., Silvester, D. S., Aldous, L., Hardacre, C., & Compton, R. G. (2008) · Journal of Chemical & Engineering Data · doi:10.1021/je800678e · Cited by 574
Developments in electrode materials and electrolytes for aluminium–air batteries
Egan, D. R., Ponce de León, C., Wood, R. J. K., Jones, R. L., Stokes, K. R., & Walsh, F. C. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.141 · Cited by 465
Additive Manufacturing of Metal Structures at the Micrometer Scale
Hirt, L., Reiser, A., Spolenak, R., & Zambelli, T. (2017) · Advanced Materials · doi:10.1002/adma.201604211 · Cited by 400
Crystalline vs. Ionic Liquid Salt Forms of Active Pharmaceutical Ingredients: A Position Paper
Stoimenovski, J., MacFarlane, D. R., Bica, K., & Rogers, R. D. (2010) · Pharmaceutical Research · doi:10.1007/s11095-009-0030-0 · Cited by 358
Solvometallurgy: An Emerging Branch of Extractive Metallurgy
Binnemans, K., & Jones, P. T. (2017) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-017-0128-2 · Cited by 340
A review of plasma–liquid interactions for nanomaterial synthesis
Chen, Q., Li, J., & Li, Y. (2015) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/48/42/424005 · Cited by 323
Ionic liquids confined in porous matrices: Physicochemical properties and applications
Singh, M. P., Singh, R. K., & Chandra, S. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.001 · Cited by 318
Ionic liquids and deep eutectic solvents for biodiesel synthesis: a review
Zhao, H., & Baker, G. A. (2013) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.3935 · Cited by 313
Double layer in ionic liquids: The nature of the camel shape of capacitance
Fedorov, M. V., Georgi, N., & Kornyshev, A. A. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.12.019 · Cited by 312
Barrosse‐Antle, L. E., Bond, A. M., Compton, R. G., O'Mahony, A. M., Rogers, E. I., & Silvester, D. S. (2010) · Chemistry – An Asian Journal · doi:10.1002/asia.200900191 · Cited by 312
Halometallate ionic liquids – revisited
Estager, J., Holbrey, J. D., & Swadźba-Kwaśny, M. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60310e · Cited by 308
Carbon electrodes for capacitive technologies
Ratajczak, P., Suss, M. E., Kaasik, F., & Béguin, F. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.04.031 · Cited by 297
EXAFS Study into the Speciation of Metal Salts Dissolved in Ionic Liquids and Deep Eutectic Solvents
Hartley, J. M., Ip, C.-M., Forrest, G. C. H., Singh, K., Gurman, S. J., Ryder, K. S., Abbott, A. P., & Frisch, G. (2014) · Inorganic Chemistry · doi:10.1021/ic500824r · Cited by 266
Molecular Dynamic Simulations and Vibrational Analysis of an Ionic Liquid Analogue
Perkins, S. L., Painter, P., & Colina, C. M. (2013) · The Journal of Physical Chemistry B · doi:10.1021/jp404619x · Cited by 255
McDonough, J. K., Frolov, A. I., Presser, V., Niu, J., Miller, C. H., Ubieto, T., Fedorov, M. V., & Gogotsi, Y. (2012) · Carbon · doi:10.1016/j.carbon.2011.12.022 · Cited by 252
Yao, C., Pitner, W. R., & Anderson, J. L. (2009) · Analytical Chemistry · doi:10.1021/ac900719m · Cited by 167
Habibi, E., Ghanemi, K., Fallah-Mehrjardi, M., & Dadolahi-Sohrab, A. (2013) · Analytica Chimica Acta · doi:10.1016/j.aca.2012.11.054 · Cited by 130
Li, Z., Xia, S., Wang, J., Bian, C., & Tong, J. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.08.061 · Cited by 63
Ionic liquids in enzymatic catalysis and biochemical methods of analysis: Capabilities and prospects
Muginova, S. V., Galimova, A. Z., Polyakov, A. E., & Shekhovtsova, T. N. (2010) · Journal of Analytical Chemistry · doi:10.1134/s1061934810040027 · Cited by 36
Metadata
- Venue
- Wiley eBooks
- Publisher
- Wiley
- Published
- 2008-02-20
- OpenAlex
- W1482347972
- Cited by
- 804
- References
- 0
- FWCI
- 28.22
- Type
- book
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.