The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Relating the Morphology of Poly(p‐phenylene vinylene)/Methanofullerene Blends to Solar‐Cell Performance
Abstract
The performance of bulk‐heterojunction solar cells based on a phase‐separated mixture of donor and acceptor materials is known to be critically dependent on the morphology of the active layer. Here we use a combination of techniques to resolve the morphology of spin cast films of poly(p‐phenylene vinylene)/methanofullerene blends in three dimensions on a nanometer scale and relate the results to the performance of the corresponding solar cells. Atomic force microscopy (AFM), transmission electron microscopy (TEM), and depth profiling using dynamic time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) clearly show that for the two materials used in this study, 1‐(3‐methoxycarbonyl)propyl‐1‐phenyl‐[6,6]‐methanofullerene (PCBM) and poly[2‐methoxy‐5‐(3′,7′‐dimethyloctyloxy)‐1,4‐phenylene vinylene] (MDMO‐PPV), phase separation is not observed up to 50 wt.‐% PCBM. Nanoscale phase separation throughout the film sets in for concentrations of more than 67 wt.‐% PCBM, to give domains of rather pure PCBM in a homogenous matrix of 50:50 wt.‐% MDMO‐PPV/PCBM. Electrical characterization, under illumination and in the dark, of the corresponding photovoltaic devices revealed a strong increase of power conversion efficiency when the phase‐separated network develops, with a sharp increase of the photocurrent and fill factor between 50 and 67 wt.‐% PCBM. As the phase separation sets in, enhanced electron transport and a reduction of bimolecular charge recombination provide the conditions for improved performance. The results are interpreted in terms of a model that proposes a hierarchical build up of two cooperative interpenetrating networks at different length scales.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Self-citationHybrid Nanorod-Polymer Solar Cells
Huynh, W. U., Dittmer, J. J., & Alivisatos, A. P. (2002) · Science · doi:10.1126/science.1069156 · Cited by 5,014
Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene
Sariciftci, N. S., Smilowitz, L., Heeger, A. J., & Wudl, F. (1992) · Science · doi:10.1126/science.258.5087.1474 · Cited by 4,273
Efficient photodiodes from interpenetrating polymer networks
Halls, J. J. M., Walsh, C. A., Greenham, N. C., Marseglia, E. A., Friend, R. H., Moratti, S. C., & Holmes, A. B. (1995) · Nature · doi:10.1038/376498a0 · Cited by 3,258
2.5% efficient organic plastic solar cells
Shaheen, S. E., Brabec, C. J., Sariciftci, N. S., Padinger, F., Fromherz, T., & Hummelen, J. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345834 · Cited by 2,613
Self-citationEffects of Postproduction Treatment on Plastic Solar Cells
Padinger, F., Rittberger, R. S., & Sariciftci, N. S. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200390011 · Cited by 2,018
Origin of the Open Circuit Voltage of Plastic Solar Cells
Brabec, C. J., Cravino, A., Meissner, D., Sariciftci, N. S., Fromherz, T., Rispens, M. T., Sanchez, L., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200110)11:5<374::aid-adfm374>3.0.co;2-w · Cited by 1,808
Self-citationEfficient Methano[70]fullerene/MDMO‐PPV Bulk Heterojunction Photovoltaic Cells
Wienk, M. M., Kroon, J. M., Verhees, W. J. H., Knol, J., Hummelen, J. C., van Hal, P. A., & Janssen, R. A. J. (2003) · Angewandte Chemie International Edition · doi:10.1002/anie.200351647 · Cited by 1,185
Self-citationApplications Of Percolation Theory
Sahini, M., & Sahimi, M. (1994) · CRC Press eBooks · doi:10.1201/9781482272444 · Cited by 1,184
Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors
Schilinsky, P., Waldauf, C., & Brabec, C. J. (2002) · Applied Physics Letters · doi:10.1063/1.1521244 · Cited by 1,032
Cited by
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Charge Photogeneration in Organic Solar Cells
Clarke, T. M., & Durrant, J. R. (2010) · Chemical Reviews · doi:10.1021/cr900271s · Cited by 2,372
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Device Physics of Polymer:Fullerene Bulk Heterojunction Solar Cells
Blom, P. W. M., Mihailetchi, V. D., Koster, L. J. A., & Markov, D. E. (2007) · Advanced Materials · doi:10.1002/adma.200601093 · Cited by 2,299
Conjugated Polymer Photovoltaic Cells
Coakley, K. M., & McGehee, M. D. (2004) · Chemistry of Materials · doi:10.1021/cm049654n · Cited by 2,128
Morphology of polymer/fullerene bulk heterojunction solar cells
Hoppe, H., & Sariciftci, N. S. (2006) · J. Mater. Chem. · doi:10.1039/b510618b · Cited by 1,414
Organic Light Detectors: Photodiodes and Phototransistors
Baeg, K., Binda, M., Natali, D., Caironi, M., & Noh, Y. (2013) · Advanced Materials · doi:10.1002/adma.201204979 · Cited by 1,344
Chen, L., Hong, Z., Li, G., & Yang, Y. (2009) · Advanced Materials · doi:10.1002/adma.200802854 · Cited by 1,267
Space-Charge Limited Photocurrent
Mihailetchi, V. D., Wildeman, J., & Blom, P. W. M. (2005) · Physical Review Letters · doi:10.1103/physrevlett.94.126602 · Cited by 1,130
Reyes-Reyes, M., Kim, K., & Carroll, D. L. (2005) · Applied Physics Letters · doi:10.1063/1.2006986 · Cited by 1,122
Spiro Compounds for Organic Optoelectronics
Saragi, T. P. I., Spehr, T., Siebert, A., Fuhrmann-Lieker, T., & Salbeck, J. (2007) · Chemical Reviews · doi:10.1021/cr0501341 · Cited by 1,066
Kyaw, A. K. K., Wang, D. H., Gupta, V., Leong, W. L., Ke, L., Bazan, G. C., & Heeger, A. J. (2013) · ACS Nano · doi:10.1021/nn401267s · Cited by 1,046
Device model for the operation of polymer/fullerene bulk heterojunction solar cells
Koster, L. J. A., Smits, E. C. P., Mihailetchi, V. D., & Blom, P. W. M. (2005) · Physical Review B · doi:10.1103/physrevb.72.085205 · Cited by 967
Hybrid Zinc Oxide Conjugated Polymer Bulk Heterojunction Solar Cells
Beek, W. J. E., Wienk, M. M., Kemerink, M., Yang, X., & Janssen, R. A. J. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp050745x · Cited by 910
Self-citationRoquet, S., Cravino, A., Leriche, P., Alévêque, O., Frère, P., & Roncali, J. (2006) · Journal of the American Chemical Society · doi:10.1021/ja058178e · Cited by 787
Solution-Processable Graphene Oxide as an Efficient Hole Transport Layer in Polymer Solar Cells
Li, S.-S., Tu, K.-H., Lin, C.-C., Chen, C.-W., & Chhowalla, M. (2010) · ACS Nano · doi:10.1021/nn100551j · Cited by 780
Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites
Chirvase, D., Parisi, J., Hummelen, J. C., & Dyakonov, V (2004) · Nanotechnology · doi:10.1088/0957-4484/15/9/035 · Cited by 723
Self-citationOrganic Photovoltaics over Three Decades
Inganäs, O. (2018) · Advanced Materials · doi:10.1002/adma.201800388 · Cited by 708
Mayer, A. C., Scully, S. R., Hardin, B. E., Rowell, M. W., & McGehee, M. D. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70276-6 · Cited by 700
Koster, L. J. A., Mihailetchi, V. D., Xie, H., & Blom, P. W. M. (2005) · Applied Physics Letters · doi:10.1063/1.2130396 · Cited by 683
Toward High-Performance Polymer Solar Cells: The Importance of Morphology Control
Yang, X., & Loos, J. (2007) · Macromolecules · doi:10.1021/ma0618732 · Cited by 622
Self-citationKyaw, A. K. K., Wang, D. H., Wynands, D., Zhang, J., Nguyen, T.-Q., Bazan, G. C., & Heeger, A. J. (2013) · Nano Letters · doi:10.1021/nl401758g · Cited by 615
Dang, M. T., Hirsch, L., Wantz, G., & Wuest, J. D. (2013) · Chemical Reviews · doi:10.1021/cr300005u · Cited by 587
Light Harvesting for Organic Photovoltaics
Hedley, G. J., Ruseckas, A., & Samuel, I. D. W. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00215 · Cited by 580
Veldman, D., İpek, Ö., Meskers, S. C. J., Sweelssen, J., Koetse, M. M., Veenstra, S. C., Kroon, J. M., van Bavel, S. S., Loos, J., & Janssen, R. A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8012598 · Cited by 577
Self-citationMetallated conjugated polymers as a new avenue towards high-efficiency polymer solar cells
Wong, W.-Y., Wang, X.-Z., He, Z., Djurišić, A. B., Yip, C.-T., Cheung, K.-Y., Wang, H., Mak, C. S. K., & Chan, W.-K. (2007) · Nature Materials · doi:10.1038/nmat1909 · Cited by 567
Vandewal, K., Gadisa, A., Oosterbaan, W. D., Bertho, S., Banishoeib, F., Van Severen, I., Lutsen, L., Cleij, T. J., Vanderzande, D., & Manca, J. V. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800056 · Cited by 549
The effect of three-dimensional morphology on the efficiency of hybrid polymer solar cells
Oosterhout, S. D., Wienk, M. M., van Bavel, S. S., Thiedmann, R., Jan Anton Koster, L., Gilot, J., Loos, J., Schmidt, V., & Janssen, R. A. J. (2009) · Nature Materials · doi:10.1038/nmat2533 · Cited by 531
Self-citationControlling Morphology in Polymer–Fullerene Mixtures
Moulé, A. J., & Meerholz, K. (2008) · Advanced Materials · doi:10.1002/adma.200701519 · Cited by 511
Bulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization
Kang, H., Kim, G., Kim, J., Kwon, S., Kim, H., & Lee, K. (2016) · Advanced Materials · doi:10.1002/adma.201601197 · Cited by 489
Wong, W.-Y., & Ho, C.-L. (2010) · Accounts of Chemical Research · doi:10.1021/ar1000378 · Cited by 460
Zhang, F., Jespersen, K. G., Björström, C., Svensson, M., Andersson, M. R., Sundström, V., Magnusson, K., Moons, E., Yartsev, A., & Inganäs, O. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500339 · Cited by 441
Jamieson, F. C., Domingo, E. B., McCarthy-Ward, T., Heeney, M., Stingelin, N., & Durrant, J. R. (2012) · Chem. Sci. · doi:10.1039/c1sc00674f · Cited by 439
Markov, D. E., Amsterdam, E., Blom, P. W. M., Sieval, A. B., & Hummelen, J. C. (2005) · The Journal of Physical Chemistry A · doi:10.1021/jp0509663 · Cited by 432
Self-citationQuantifying Bimolecular Recombination Losses in Organic Bulk Heterojunction Solar Cells
Koster, L. J. A., Kemerink, M., Wienk, M. M., Maturová, K., & Janssen, R. A. J. (2011) · Advanced Materials · doi:10.1002/adma.201004311 · Cited by 420
Self-citationAnalysis of the failure mechanism for a stable organic photovoltaic during 10 000 h of testing
Krebs, F. C., & Norrman, K. (2007) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.794 · Cited by 420
From One‐ to Three‐Dimensional Organic Semiconductors: In Search of the Organic Silicon?
Roncali, J., Leriche, P., & Cravino, A. (2007) · Advanced Materials · doi:10.1002/adma.200700135 · Cited by 403
Mihailetchi, V. D., Koster, L. J. A., Blom, P. W. M., Melzer, C., de Boer, B., van Duren, J. K. J., & Janssen, R. A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400345 · Cited by 396
Self-citationBarium: An Efficient Cathode Layer for Bulk-heterojunction Solar Cells
Gupta, V., Kyaw, A. K. K., Wang, D. H., Chand, S., Bazan, G. C., & Heeger, A. J. (2013) · Scientific Reports · doi:10.1038/srep01965 · Cited by 383
Tamayo, A. B., Walker, B., & Nguyen*, T.-Q. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp8031572 · Cited by 365
Chochos, C. L., & Choulis, S. A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.04.003 · Cited by 340
Photogeneration and Ultrafast Dynamics of Excitons and Charges in P3HT/PCBM Blends
Piris, J., Dykstra, T. E., Bakulin, A. A., Loosdrecht, P. H. M. V., Knulst, W., Trinh, M. T., Schins, J. M., & Siebbeles, L. D. A. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp904229q · Cited by 333
Pivrikas, A., Juška, G., Mozer, A. J., Scharber, M., Arlauskas, K., Sariciftci, N. S., Stubb, H., & Österbacka, R. (2005) · Physical Review Letters · doi:10.1103/physrevlett.94.176806 · Cited by 331
On the morphology of polymer‐based photovoltaics
Liu, F., Gu, Y., Jung, J. W., Jo, W. H., & Russell, T. P. (2012) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23063 · Cited by 323
Predicting Morphologies of Solution Processed Polymer:Fullerene Blends
Kouijzer, S., Michels, J. J., van den Berg, M., Gevaerts, V. S., Turbiez, M., Wienk, M. M., & Janssen, R. A. J. (2013) · Journal of the American Chemical Society · doi:10.1021/ja405493j · Cited by 316
Self-citationPhotovoltaics from soluble small molecules
Lloyd, M. T., Anthony, J. E., & Malliaras, G. G. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70277-8 · Cited by 312
Recent progress in morphology control of supramolecular fullerene assemblies and its applications
Babu, S. S., Möhwald, H., & Nakanishi, T. (2010) · Chemical Society Reviews · doi:10.1039/c000680g · Cited by 305
Origin of the Reduced Fill Factor and Photocurrent in MDMO‐PPV:PCNEPV All‐Polymer Solar Cells
Mandoc, M. M., Veurman, W., Koster, L. J. A., de Boer, B., & Blom, P. W. M. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601110 · Cited by 305
Regioregular Copolymers of 3-Alkoxythiophene and Their Photovoltaic Application
Shi, C., Yao, Y., Yang, & Pei, Q. (2006) · Journal of the American Chemical Society · doi:10.1021/ja061664x · Cited by 288
van Bavel, S. S., Bärenklau, M., de With, G., Hoppe, H., & Loos, J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902247 · Cited by 279
Self-citationRecent research progress of polymer donor/polymer acceptor blend solar cells
Benten, H., Mori, D., Ohkita, H., & Ito, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta10759h · Cited by 275
Li, J., Dierschke, F., Wu, J., Grimsdale, A. C., & Müllen, K. (2006) · J. Mater. Chem. · doi:10.1039/b512373a · Cited by 274
Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics
Liu, F., Gu, Y., Shen, X., Ferdous, S., Wang, H.-W., & Russell, T. P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.010 · Cited by 268
Materials Design Considerations for Charge Generation in Organic Solar Cells
Dimitrov, S. D., & Durrant, J. R. (2014) · Chemistry of Materials · doi:10.1021/cm402403z · Cited by 260
Roncali, J. (2005) · Chemical Society Reviews · doi:10.1039/b415941c · Cited by 258
Jung, J. W., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500486 · Cited by 256
Savenije, T. J., Kroeze, J. E., Yang, X., & Loos, J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400559 · Cited by 255
Self-citationAl-Ibrahim, M., Ambacher, O., Sensfuss, S., & Gobsch, G. (2005) · Applied Physics Letters · doi:10.1063/1.1929875 · Cited by 252
Hendry, E., Koeberg, M., Schins, J. M., Nienhuys, H. K., Sundström, V., Siebbeles, L. D. A., & Bonn, M. (2005) · Physical Review B · doi:10.1103/physrevb.71.125201 · Cited by 206
BELCHER, W., WAGNER, K., & DASTOOR, P. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.09.007 · Cited by 88
Dastoor, P. C., McNeill, C. R., Frohne, H., Foster, C. J., Dean, B., Fell, C. J., Belcher, W. J., Campbell, W. M., Officer, D. L., Blake, I. M., et al. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0748664 · Cited by 77
Sharma, G. D., Siddiqui, S. A., Nikiforou, A., Zervaki, G. E., Georgakaki, I., Ladomenou, K., & Coutsolelos, A. G. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01076d · Cited by 36
Cho, E. H., Chae, S. H., Kim, K., Lee, S. J., & Joo, J. (2012) · Synthetic Metals · doi:10.1016/j.synthmet.2012.03.007 · Cited by 15
Metadata
- Authors
- van Duren, J. K. J., Yang, X., Loos, J., Bulle‐Lieuwma, C. W. T., Sieval, A. B., Hummelen, J. C., & Janssen, R. A. J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2004-05
- Volume
- 14
- Issue
- 5
- Pages
- 425-434
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2057279555
- Cited by
- 651
- References
- 29
- FWCI
- 45.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.