The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
“Solvent Annealing” Effect in Polymer Solar Cells Based on Poly(3‐hexylthiophene) and Methanofullerenes
Abstract
The self‐organization of the polymer in solar cells based on regioregular poly(3‐hexylthiophene) (RR‐P3HT):[6,6]‐phenyl C 61‐butyric acid methyl ester (PCBM) is studied systematically as a function of the spin‐coating time ts (varied from 20–80 s), which controls the solvent annealing time ta, the time taken by the solvent to dry after the spin‐coating process. These blend films are characterized by photoluminescence spectroscopy, UV‐vis absorption spectroscopy, atomic force microscopy, and grazing incidence X‐ray diffraction (GIXRD) measurements. The results indicate that the π‐conjugated structure of RR‐P3HT in the films is optimally developed when ta is greater than 1 min (ts ∼ 50 s). For ts < 50 s, both the short‐circuit current (JSC) and the power conversion efficiency (PCE) of the corresponding polymer solar cells show a plateau region, whereas for 50 < ts < 55 s, the JSC and PCE values are significantly decreased, suggesting that there is a major change in the ordering of the polymer in this time window. The PCE decreases from 3.6 % for a film with a highly ordered π‐conjugated structure of RR‐P3HT to 1.2 % for a less‐ordered film. GIXRD results confirm the change in the ordering of the polymer. In particular, the incident photon‐to‐electron conversion efficiency spectrum of the less‐ordered solar cell shows a clear loss in both the overall magnitude and the long‐wavelength response. The solvent annealing effect is also studied for devices with different concentrations of PCBM (PCBM concentrations ranging from 25 to 67 wt %). Under “solvent annealing” conditions, the polymer is seen to be ordered even at 67 wt % PCBM loading. The open‐circuit voltage (VOC) is also affected by the ordering of the polymer and the PCBM loading in the active layer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Solid State Physics
Kittel, C., & Fan, H. Y. (1957) · American Journal of Physics · doi:10.1119/1.1934457 · Cited by 22,240
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Self-citationTwo-dimensional charge transport in self-organized, high-mobility conjugated polymers
Sirringhaus, H., Brown, P. J., Friend, R. H., Nielsen, M. M., Bechgaard, K., Langeveld-Voss, B. M. W., Spiering, A. J. H., Janssen, R. A. J., Meijer, E. W., Herwig, P., et al. (1999) · Nature · doi:10.1038/44359 · Cited by 4,624
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene
Sariciftci, N. S., Smilowitz, L., Heeger, A. J., & Wudl, F. (1992) · Science · doi:10.1126/science.258.5087.1474 · Cited by 4,273
Integrated Optoelectronic Devices Based on Conjugated Polymers
Sirringhaus, H., Tessler, N., & Friend, R. H. (1998) · Science · doi:10.1126/science.280.5370.1741 · Cited by 2,736
2.5% efficient organic plastic solar cells
Shaheen, S. E., Brabec, C. J., Sariciftci, N. S., Padinger, F., Fromherz, T., & Hummelen, J. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345834 · Cited by 2,613
Kim, Y., Cook, S., Tuladhar, S. M., Choulis, S. A., Nelson, J., Durrant, J. R., Bradley, D. D. C., Giles, M., McCulloch, I., Ha, C.-S., et al. (2006) · Nature Materials · doi:10.1038/nmat1574 · Cited by 2,312
Effects of Postproduction Treatment on Plastic Solar Cells
Padinger, F., Rittberger, R. S., & Sariciftci, N. S. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200390011 · Cited by 2,018
Cited by
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Self-citationLiang, Y., Xu, Z., Xia, J., Tsai, S., Wu, Y., Li, G., Ray, C., & Yu, L. (2010) · Advanced Materials · doi:10.1002/adma.200903528 · Cited by 3,649
Self-citationWang, C., Dong, H., Hu, W., Liu, Y., & Zhu, D. (2012) · Chemical Reviews · doi:10.1021/cr100380z · Cited by 3,605
Polymer‐Fullerene Bulk‐Heterojunction Solar Cells
Dennler, G., Scharber, M. C., & Brabec, C. J. (2009) · Advanced Materials · doi:10.1002/adma.200801283 · Cited by 3,114
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Self-citationPolymer–Fullerene Bulk‐Heterojunction Solar Cells
Brabec, C. J., Gowrisanker, S., Halls, J. J. M., Laird, D., Jia, S., & Williams, S. P. (2010) · Advanced Materials · doi:10.1002/adma.200903697 · Cited by 2,621
Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
Cui, Y., Yao, H., Zhang, J., Xian, K., Zhang, T., Hong, L., Wang, Y., Xu, Y., Ma, K., An, C., et al. (2020) · Advanced Materials · doi:10.1002/adma.201908205 · Cited by 1,960
Xiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Liang, Y., Feng, D., Wu, Y., Tsai, S.-T., Li, G., Ray, C., & Yu, L. (2009) · Journal of the American Chemical Society · doi:10.1021/ja901545q · Cited by 1,387
Self-citationChen, L., Hong, Z., Li, G., & Yang, Y. (2009) · Advanced Materials · doi:10.1002/adma.200802854 · Cited by 1,267
Self-citationP3HT:PCBM, Best Seller in Polymer Photovoltaic Research
Dang, M. T., Hirsch, L., & Wantz, G. (2011) · Advanced Materials · doi:10.1002/adma.201100792 · Cited by 1,261
Bulk Heterojunction Solar Cells: Morphology and Performance Relationships
Huang, Y., Kramer, E. J., Heeger, A. J., & Bazan, G. C. (2014) · Chemical Reviews · doi:10.1021/cr400353v · Cited by 1,249
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302563 · Cited by 1,151
Self-citationDevelopment of New Semiconducting Polymers for High Performance Solar Cells
Liang, Y., Wu, Y., Feng, D., Tsai, S.-T., Son, H.-J., Li, G., & Yu, L. (2009) · Journal of the American Chemical Society · doi:10.1021/ja808373p · Cited by 930
Self-citationThe future of organic photovoltaics
Mazzio, K. A., & Luscombe, C. K. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00227j · Cited by 766
Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells
Shao, Y., Yuan, Y., & Huang, J. (2016) · Nature Energy · doi:10.1038/nenergy.2015.1 · Cited by 757
Müller‐Buschbaum, P. (2014) · Advanced Materials · doi:10.1002/adma.201304187 · Cited by 730
Liang, Y., & Yu, L. (2010) · Accounts of Chemical Research · doi:10.1021/ar1000296 · Cited by 697
Xu, Z., Chen, L., Yang, G., Huang, C., Hou, J., Wu, Y., Li, G., Hsu, C., & Yang, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801286 · Cited by 681
Self-citationEffects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells
Yao, Y., Hou, J., Xu, Z., Li, G., & Yang, Y. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701459 · Cited by 671
Self-citationVersatile ternary organic solar cells: a critical review
An, Q., Zhang, F., Zhang, J., Tang, W., Deng, Z., & Hu, B. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02641e · Cited by 645
Morphology Control in Organic Solar Cells
Zhao, F., Wang, C., & Zhan, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703147 · Cited by 630
Endohedral fullerenes for organic photovoltaic devices
Ross, R. B., Cardona, C. M., Guldi, D. M., Sankaranarayanan, S. G., Reese, M. O., Kopidakis, N., Peet, J., Walker, B., Bazan, G. C., Van Keuren, E., et al. (2009) · Nature Materials · doi:10.1038/nmat2379 · Cited by 626
Perovskite-based solar cells: impact of morphology and device architecture on device performance
Salim, T., Sun, S., Abe, Y., Krishna, A., Grimsdale, A. C., & Lam, Y. M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05226a · Cited by 602
Effects of Thermal Annealing Upon the Morphology of Polymer–Fullerene Blends
Verploegen, E., Mondal, R., Bettinger, C. J., Sok, S., Toney, M. F., & Bao, Z. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000975 · Cited by 595
Fu, J., Fong, P. W. K., Liu, H., Huang, C.-S., Lu, X., Lu, S., Abdelsamie, M., Kodalle, T., Sutter-Fella, C. M., Yang, Y., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-37526-5 · Cited by 588
Self-citationDang, M. T., Hirsch, L., Wantz, G., & Wuest, J. D. (2013) · Chemical Reviews · doi:10.1021/cr300005u · Cited by 587
Light Harvesting for Organic Photovoltaics
Hedley, G. J., Ruseckas, A., & Samuel, I. D. W. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00215 · Cited by 580
Lou, S. J., Szarko, J. M., Xu, T., Yu, L., Marks, T. J., & Chen, L. X. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2085564 · Cited by 539
Additives for morphology control in high-efficiency organic solar cells
Liao, H.-C., Ho, C.-C., Chang, C.-Y., Jao, M.-H., Darling, S. B., & Su, W.-F. (2013) · Materials Today · doi:10.1016/j.mattod.2013.08.013 · Cited by 535
High-performance multiple-donor bulk heterojunction solar cells
Yang, Y. (., Chen, W., Dou, L., Chang, W.-H., Duan, H.-S., Bob, B., Li, G., & Yang, Y. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.9 · Cited by 527
Self-citationSolvent Additives: Key Morphology‐Directing Agents for Solution‐Processed Organic Solar Cells
McDowell, C., Abdelsamie, M., Toney, M. F., & Bazan, G. C. (2018) · Advanced Materials · doi:10.1002/adma.201707114 · Cited by 513
Carsten, B., Szarko, J. M., Son, H. J., Wang, W., Lu, L., He, F., Rolczynski, B. S., Lou, S. J., Chen, L. X., & Yu, L. (2011) · Journal of the American Chemical Society · doi:10.1021/ja208642b · Cited by 483
Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer
Liao, H.-H., Chen, L.-M., Xu, Z., Li, G., & Yang, Y. (2008) · Applied Physics Letters · doi:10.1063/1.2918983 · Cited by 473
Self-citationSu, M., Kuo, C., Yuan, M., Jeng, U., Su, C., & Wei, K. (2011) · Advanced Materials · doi:10.1002/adma.201101274 · Cited by 473
Su, Y.-W., Lan, S.-C., & Wei, K.-H. (2012) · Materials Today · doi:10.1016/s1369-7021(13)70013-0 · Cited by 454
Hsieh, C.-H., Cheng, Y.-J., Li, P.-J., Chen, C.-H., Dubosc, M., Liang, R.-M., & Hsu, C.-S. (2010) · Journal of the American Chemical Society · doi:10.1021/ja100236b · Cited by 440
The Role of Processing in the Fabrication and Optimization of Plastic Solar Cells
Peet, J., Senatore, M. L., Heeger, A. J., & Bazan, G. C. (2009) · Advanced Materials · doi:10.1002/adma.200802559 · Cited by 391
Li, G., Shrotriya, V., Yao, Y., Huang, J., & Yang, Y. (2007) · Journal of Materials Chemistry · doi:10.1039/b703075b · Cited by 377
Self-citationTamayo, A. B., Walker, B., & Nguyen*, T.-Q. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp8031572 · Cited by 365
Silicon Atom Substitution Enhances Interchain Packing in a Thiophene‐Based Polymer System
Chen, H., Hou, J., Hayden, A. E., Yang, H., Houk, K. N., & Yang, Y. (2010) · Advanced Materials · doi:10.1002/adma.200902469 · Cited by 361
Self-citationRecent progress in organic photovoltaics: device architecture and optical design
Cao, W., & Xue, J. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00260a · Cited by 356
Ayzner, A. L., Tassone, C. J., Tolbert, S. H., & Schwartz, B. J. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9050897 · Cited by 348
Po, R., Bernardi, A., Calabrese, A., Carbonera, C., Corso, G., & Pellegrino, A. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43460e · Cited by 336
Koppe, M., Egelhaaf, H., Dennler, G., Scharber, M. C., Brabec, C. J., Schilinsky, P., & Hoth, C. N. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901473 · Cited by 333
On the morphology of polymer‐based photovoltaics
Liu, F., Gu, Y., Jung, J. W., Jo, W. H., & Russell, T. P. (2012) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23063 · Cited by 323
Yin, W., & Dadmun, M. (2011) · ACS Nano · doi:10.1021/nn200744q · Cited by 314
Ye, L., Zhang, S., Ma, W., Fan, B., Guo, X., Huang, Y., Ade, H., & Hou, J. (2012) · Advanced Materials · doi:10.1002/adma.201202855 · Cited by 308
Time‐Dependent Morphology Evolution by Annealing Processes on Polymer:Fullerene Blend Solar Cells
Jo, J., Kim, S., Na, S., Yu, B., & Kim, D. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200800968 · Cited by 299
Conjugated polymer–inorganic semiconductor hybrid solar cells
Xu, T., & Qiao, Q. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00632g · Cited by 284
Molecular Order Control of Non-fullerene Acceptors for High-Efficiency Polymer Solar Cells
Li, W., Chen, M., Cai, J., Spooner, E. L. K., Zhang, H., Gurney, R. S., Liu, D., Xiao, Z., Lidzey, D. G., Ding, L., et al. (2019) · Joule · doi:10.1016/j.joule.2018.11.023 · Cited by 280
van Bavel, S. S., Bärenklau, M., de With, G., Hoppe, H., & Loos, J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902247 · Cited by 279
Chen, Y.-H., Lin, L.-Y., Lu, C.-W., Lin, F., Huang, Z.-Y., Lin, H.-W., Wang, P.-H., Liu, Y.-H., Wong, K.-T., Wen, J., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja301872s · Cited by 274
Polymer Crystallization of Partially Miscible Polythiophene/Fullerene Mixtures Controls Morphology
Kozub, D. R., Vakhshouri, K., Orme, L. M., Wang, C., Hexemer, A., & Gomez, E. D. (2011) · Macromolecules · doi:10.1021/ma200855r · Cited by 272
Conjugated Block Copolymer Photovoltaics with near 3% Efficiency through Microphase Separation
Guo, C., Lin, Y.-H., Witman, M. D., Smith, K. A., Wang, C., Hexemer, A., Strzalka, J., Gomez, E. D., & Verduzco, R. (2013) · Nano Letters · doi:10.1021/nl401420s · Cited by 270
Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics
Liu, F., Gu, Y., Shen, X., Ferdous, S., Wang, H.-W., & Russell, T. P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.010 · Cited by 268
Bulk-heterojunction hybrid solar cells based on colloidal nanocrystals and conjugated polymers
Zhou, Y., Eck, M., & Krüger, M. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00143k · Cited by 266
Morphology Control in Solution‐Processed Bulk‐Heterojunction Solar Cell Mixtures
Moulé, A. J., & Meerholz, K. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900775 · Cited by 263
Savagatrup, S., Printz, A. D., O'Connor, T. F., Zaretski, A. V., Rodriquez, D., Sawyer, E. J., Rajan, K. M., Acosta, R. I., Root, S. E., & Lipomi, D. J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02657h · Cited by 255
Flow-enhanced solution printing of all-polymer solar cells
Diao, Y., Zhou, Y., Kurosawa, T., Shaw, L., Wang, C., Park, S., Guo, Y., Reinspach, J. A., Gu, K., Gu, X., et al. (2015) · Nature Communications · doi:10.1038/ncomms8955 · Cited by 254
Sharma, G. D., Zervaki, G. E., Angaridis, P. A., Kitsopoulos, T. N., & Coutsolelos, A. G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500090h · Cited by 47
High-Efficiency Small Molecule-Based Bulk-Heterojunction Solar Cells Enhanced by Additive Annealing
Li, L., Xiao, L., Qin, H., Gao, K., Peng, J., Cao, Y., Liu, F., Russell, T. P., & Peng, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06691 · Cited by 40
Sharma, G. D., Zervaki, G. E., Angaridis, P., & Coutsolelos, A. G. (2014) · RSC Adv. · doi:10.1039/c4ra07770a · Cited by 13
Metadata
- Authors
- Li, G., Yao, Y., Yang, H., Shrotriya, V., Yang, G., & Yang, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2007-05-18
- Volume
- 17
- Issue
- 10
- Pages
- 1636-1644
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2022983236
- Cited by
- 1,147
- References
- 33
- FWCI
- 68.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.