The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Carbonyl‐β‐Cyclodextrin as a Novel Binder for Sulfur Composite Cathodes in Rechargeable Lithium Batteries
Open accessAbstract
As one of the essential components in electrodes, the binder affects the performance of a rechargeable battery. By modifying β‐cyclodextrin (β‐CD), an appropriate binder for sulfur composite cathodes is identified. Through a partial oxidation reaction in H 2 O 2 solution, β‐CD is successfully modified to carbonyl‐β‐cyclodextrin (C‐β‐CD), which exhibits a water solubility ca. 100 times that of β‐CD at room temperature. C‐β‐CD possesses the typical properties of an aqueous binder: strong bonding strength, high solubility in water, moderate viscosity, and wide electrochemical windows. Sulfur composite cathodes with C‐β‐CD as the binder demonstrate a high reversible capacity of 694.2 mA h g(composite)−1 and 1542.7 mA h g(sulfur)−1, with a sulfur utilization approaching 92.2%. The discharge capacity remains at 1456 mA h g(sulfur)−1 after 50 cycles, which is much higher than that of the cathode with unmodified β‐CD as binder. Combined with its low cost and environmental benignity, C‐β‐CD is a promising binder for sulfur cathodes in rechargeable lithium batteries with high electrochemical performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
What are batteries, fuel cells, and supercapacitors?
Winter, M., & Brodd, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020730k · Cited by 7,389
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices
Guo, Y., Hu, J., & Wan, L. (2008) · Advanced Materials · doi:10.1002/adma.200800627 · Cited by 2,223
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries
Kovalenko, I., Zdyrko, B., Magasinski, A., Hertzberg, B., Milicev, Z., Burtovyy, R., Luzinov, I., & Yushin, G. (2011) · Science · doi:10.1126/science.1209150 · Cited by 1,802
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
Methods for Selective Modifications of Cyclodextrins
Khan, A. R., Forgo, P., Stine, K. J., & D'Souza, V. T. (1998) · Chemical Reviews · doi:10.1021/cr970012b · Cited by 830
A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries
Wang, J., Yang, J., Xie, J., & Xu, N. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020704)14:13/14<963::aid-adma963>3.0.co;2-s · Cited by 818
Self-citationNew Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells
Ji, L., Rao, M., Aloni, S., Wang, L., Cairns, E. J., & Zhang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02256c · Cited by 602
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
Wu, F., Chen, J., Chen, R., Wu, S., Li, L., Chen, S., & Zhao, T. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1114724 · Cited by 520
Yin, L., Wang, J., Lin, F., Yang, J., & Nuli, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03495f · Cited by 484
Self-citationHigh “C” rate Li-S cathodes: sulfur imbibed bimodal porous carbons
He, G., Ji, X., & Nazar, L. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01219c · Cited by 475
Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes
Marmorstein, D., Yu, T. H., Striebel, K. A., McLarnon, F. R., Hou, J., & Cairns, E. J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00432-8 · Cited by 451
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
Low Cost, Environmentally Benign Binders for Lithium-Ion Batteries
Lux, S. F., Schappacher, F., Balducci, A., Passerini, S., & Winter, M. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3291976 · Cited by 289
Ahn, W., Kim, K.-B., Jung, K.-N., Shin, K.-H., & Jin, C.-S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.074 · Cited by 230
Sun, M., Zhang, S., Jiang, T., Zhang, L., & Yu, J. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.09.012 · Cited by 224
Application of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries
Sun, J., Huang, Y., Wang, W., Yu, Z., Wang, A., & Yuan, K. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.022 · Cited by 188
New approaches to improve cycle life characteristics of lithium–sulfur cells
JUNG, Y., & KIM, S. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.09.013 · Cited by 165
Improvement of cycle property of sulfur electrode for lithium/sulfur battery
Choi, Y., Kim, K.-W., Ahn, H., & Ahn, J. (2007) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2006.02.098 · Cited by 141
Schneider, H., Garsuch, A., Panchenko, A. A., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.061 · Cited by 123
Guy, D., Lestriez, B., & Guyomard, D. (2004) · Advanced Materials · doi:10.1002/adma.200306075 · Cited by 106
Additive-containing ionic liquid electrolytes for secondary lithium battery
Xu, J., Yang, J., NuLi, Y., Wang, J., & Zhang, Z. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.054 · Cited by 101
Self-citationPreparation and electrochemical characterization of the porous sulfur cathode using a gelatin binder
Sun, J., Huang, Y., Wang, W., et al. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.04.016 · Cited by 77
Correlation between positive-electrode morphology and sulfur utilization in lithium–sulfur battery
Kim, N., Lee, C.-B., Seo, J.-M., et al. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.028 · Cited by 51
Zhao, M., Li, J., Du, L., Tan, C., Xia, Q., Mao, Z., & Ji, L. (2011) · Chemistry - A European Journal · doi:10.1002/chem.201003523 · Cited by 47
Zheng, L., Xiong, L., Li, J., Li, X., Sun, J., Yang, S., & Xia, J. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2007.12.015 · Cited by 17
Cited by
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00241 · Cited by 958
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Metadata
- Authors
- Wang, J., Yao, Z., Monroe, C. W., Yang, J., & Nuli, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2012-10-04
- Volume
- 23
- Issue
- 9
- Pages
- 1194-1201
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2161887204
- Cited by
- 266
- References
- 38
- FWCI
- 10.58
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.