The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Controllable Perovskite Crystallization by Water Additive for High‐Performance Solar Cells
Abstract
A key issue for perovskite solar cells is the stability of perovskite materials due to moisture effects under ambient conditions, although their efficiency is improved constantly. Herein, an improved CH 3 NH 3 PbI 3−xClx perovskite quality is demonstrated with good crystallization and stability by using water as an additive during crystal perovskite growth. Incorporating suitable water additives in N,N‐dimethylformamide (DMF) leads to controllable growth of perovskites due to the lower boiling point and the higher vapor pressure of water compared with DMF. In addition, CH 3 NH 3 PbI 3−xClx · n H 2 O hydrated perovskites, which can be resistant to the corrosion by water molecules to some extent, are assumed to be generated during the annealing process. Accordingly, water additive based perovskite solar cells present a high power conversion efficiency of 16.06% and improved cell stability under ambient conditions compared with the references. The findings in this work provide a route to control the growth of crystal perovskites and a clue to improve the stability of organic–inorganic halide perovskites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stephens, P. J., Devlin, F. J., Chabalowski, C. F., & Frisch, M. J. (1994) · The Journal of Physical Chemistry · doi:10.1021/j100096a001 · Cited by 23,248
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites
Wehrenfennig, C., Eperon, G. E., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2014) · Advanced Materials · doi:10.1002/adma.201305172 · Cited by 3,239
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
Ball, J. M., Lee, M. M., Hey, A., & Snaith, H. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40810h · Cited by 1,662
CH3NH3PbI3 Perovskite/Fullerene Planar‐Heterojunction Hybrid Solar Cells
Jeng, J., Chiang, Y., Lee, M., Peng, S., Guo, T., Chen, P., & Wen, T. (2013) · Advanced Materials · doi:10.1002/adma.201301327 · Cited by 1,572
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Christians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Habisreutinger, S. N., Leijtens, T., Eperon, G. E., Stranks, S. D., Nicholas, R. J., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl501982b · Cited by 1,210
Perovskite as Light Harvester: A Game Changer in Photovoltaics
Kazim, S., Nazeeruddin, M. K., Grätzel, M., & Ahmad, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308719 · Cited by 962
Moisture assisted perovskite film growth for high performance solar cells
You, J., Yang, Y. (., Hong, Z., Song, T.-B., Meng, L., Liu, Y., Jiang, C., Zhou, H., Chang, W.-H., Li, G., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4901510 · Cited by 786
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie · doi:10.1002/ange.201405334 · Cited by 714
Conings, B., Baeten, L., De Dobbelaere, C., D'Haen, J., Manca, J., & Boyen, H. (2014) · Advanced Materials · doi:10.1002/adma.201304803 · Cited by 691
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
Kim, B. J., Kim, D. H., Lee, Y.-Y., Shin, H.-W., Han, G. S., Hong, J. S., Mahmood, K., Ahn, T. K., Joo, Y.-C., Hong, K. S., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02441a · Cited by 679
Heterojunction Modification for Highly Efficient Organic–Inorganic Perovskite Solar Cells
Wojciechowski, K., Stranks, S. D., Abate, A., Sadoughi, G., Sadhanala, A., Kopidakis, N., Rumbles, G., Li, C.-Z., Friend, R. H., Jen, A. K.-Y., et al. (2014) · ACS Nano · doi:10.1021/nn505723h · Cited by 677
High efficiency stable inverted perovskite solar cells without current hysteresis
Wu, C.-G., Chiang, C.-H., Tseng, Z.-L., Nazeeruddin, M. K., Hagfeldt, A., & Grätzel, M. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00645g · Cited by 581
Efficient and Uniform Planar‐Type Perovskite Solar Cells by Simple Sequential Vacuum Deposition
Chen, C., Kang, H., Hsiao, S., Yang, P., Chiang, K., & Lin, H. (2014) · Advanced Materials · doi:10.1002/adma.201402461 · Cited by 510
Heo, J. H., Song, D. H., & Im, S. H. (2014) · Advanced Materials · doi:10.1002/adma.201403140 · Cited by 497
Dong, X., Fang, X., Lv, M., Lin, B., Zhang, S., Ding, J., & Yuan, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06128d · Cited by 341
Tuning Perovskite Morphology by Polymer Additive for High Efficiency Solar Cell
Chang, C.-Y., Chu, C.-Y., Huang, Y.-C., Huang, C.-W., Chang, S.-Y., Chen, C.-A., Chao, C.-Y., & Su, W.-F. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00052 · Cited by 325
Thiols as interfacial modifiers to enhance the performance and stability of perovskite solar cells
Cao, J., Yin, J., Yuan, S., Zhao, Y., Li, J., & Zheng, N. (2015) · Nanoscale · doi:10.1039/c5nr01820j · Cited by 212
Abate, A., Hollman, D. J., Teuscher, J., Pathak, S., Avolio, R., D’Errico, G., Vitiello, G., Fantacci, S., & Snaith, H. J. (2013) · Journal of the American Chemical Society · doi:10.1021/ja406230f · Cited by 204
The roles of alkyl halide additives in enhancing perovskite solar cell performance
Chueh, C., Liao, C., Zuo, F., Williams, S. T., Liang, P., & Jen, A. K. ‐. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05012f · Cited by 156
Clever, H. L., & Johnston, F. J. (1980) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555628 · Cited by 144
Lv, S., Pang, S., Zhou, Y., Padture, N. P., Hu, H., Wang, L., Zhou, X., Zhu, H., Zhang, L., Huang, C., et al. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02113d · Cited by 142
Additive to regulate the perovskite crystal film growth in planar heterojunction solar cells
Song, X. Y., Wang, W., Sun, P., Ma, W., & Chen, Z. (2015) · Applied Physics Letters · doi:10.1063/1.4906073 · Cited by 140
Qian, M., Li, M., Shi, X., Ma, H., Wang, Z., & Liao, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02265g · Cited by 126
Self-citationImproved Hole Interfacial Layer for Planar Perovskite Solar Cells with Efficiency Exceeding 15%
Wang, Z., Li, M., Yuan, D.-X., Shi, X., Ma, H., & Liao, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01330 · Cited by 121
Self-citationSfyri, G., Kumar, C. V., Raptis, D., Dracopoulos, V., & Lianos, P. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.11.034 · Cited by 59
Cited by
Wei, Y., Cheng, Z., & Lin, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00740c · Cited by 1,206
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Solvent Additives: Key Morphology‐Directing Agents for Solution‐Processed Organic Solar Cells
McDowell, C., Abdelsamie, M., Toney, M. F., & Bazan, G. C. (2018) · Advanced Materials · doi:10.1002/adma.201707114 · Cited by 513
Impact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
Inverted Perovskite Solar Cells: Progresses and Perspectives
Liu, T., Chen, K., Hu, Q., Zhu, R., & Gong, Q. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600457 · Cited by 483
Metadata
- Authors
- Gong, X., Li, M., Shi, X., Ma, H., Wang, Z., & Liao, L.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2015-10
- Volume
- 25
- Issue
- 42
- Pages
- 6671-6678
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2143716035
- Cited by
- 366
- References
- 44
- FWCI
- 26.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.