Injectable Stem Cell‐Laden Photocrosslinkable Microspheres Fabricated Using Microfluidics for Rapid Generation of Osteogenic Tissue Constructs
The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Abstract
Direct injection is a minimally invasive method of stem cell transplantation for numerous injuries and diseases. However, despite its promising potential, its clinical translation is difficult due to the low cell retention and engraftment after injection. With high versatility, high‐resolution control and injectability, microfabrication of stem‐cell laden biomedical hydrogels holds great potential as minimally invasive technology. Herein, a strategy of microfluidics‐assisted technology entrapping bone marrow‐derived mesenchymal stem cells (BMSCs) and growth factors in photocrosslinkable gelatin (GelMA) microspheres to ultimately generate injectable osteogenic tissue constructs is presented. Additionally, it is demonstrated that the GelMA microspheres can sustain stem cell viability, support cell spreading inside the microspheres and migration from the interior to the surface as well as enhance cell proliferation. This finding shows that encapsulated cells have the potential to directly and actively participate in the regeneration process. Furthermore, it is found that BMSCs encapsulated in GelMA microspheres show enhanced osteogenesis in vitro and in vivo, associated with a significant increase in mineralization. In short, the proposed strategy can be utilized to facilitate bone regeneration with minimum invasiveness, and can potentially be applied along with other matrices for extended applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Multilineage potential of adult human mesenchymal stem cells
Pittenger, M. F., Mackay, A. M., Beck, S. C., Jaiswal, R. K., Douglas, R., Mosca, J. D., Moorman, M. A., Simonetti, D. W., Craig, S., & Marshak, D. R. (1999) · Science · doi:10.1126/science.284.5411.143 · Cited by 21,052
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Laflamme, M. A., Chen, K. Y., Naumova, A. V., Muskheli, V., Fugate, J. A., Dupras, S. K., Reinecke, H., Xu, C., Hassanipour, M., Police, S., et al. (2007) · Nature Biotechnology · doi:10.1038/nbt1327 · Cited by 2,206
Owen, T. A., Aronow, M., Shalhoub, V., Barone, L. M., Wilming, L., Tassinari, M. S., Kennedy, M. B., Pockwinse, S., Lian, J. B., & Stein, G. S. (1990) · Journal of Cellular Physiology · doi:10.1002/jcp.1041430304 · Cited by 1,567
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Cell Encapsulation in Biodegradable Hydrogels for Tissue Engineering Applications
Nicodemus, G. D., & Bryant, S. J. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2007.0332 · Cited by 1,239
Progress and opportunities for tissue-engineered skin
MacNeil, S. (2007) · Nature · doi:10.1038/nature05664 · Cited by 1,112
Photocrosslinkable Gelatin Hydrogel for Epidermal Tissue Engineering
Zhao, X., Lang, Q., Yildirimer, L., Lin, Z. Y., Cui, W., Annabi, N., Ng, K. W., Dokmeci, M. R., Ghaemmaghami, A. M., & Khademhosseini, A. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500005 · Cited by 832
Self-citationOpen pore biodegradable matrices formed with gas foaming
Harris, L. D., Kim, B.-S., & Mooney, D. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19981205)42:3<396::aid-jbm7>3.0.co;2-e · Cited by 824
Engineering vascularized tissue
Jain, R. K., Au, P., Tam, J., Duda, D. G., & Fukumura, D. (2005) · Nature Biotechnology · doi:10.1038/nbt0705-821 · Cited by 808
Research works printed but not linked: 2
- Lagus T. P., 2012, J. Vis. Exp., e4096
- 10.1002/(SICI)1097-4636(19981205)42:3<357::AID-JBM3>3.0.CO;2-I · DOI
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
Hydrogel microparticles for biomedical applications
Daly, A. C., Riley, L., Segura, T., & Burdick, J. A. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0148-6 · Cited by 1,249
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment
Huang, G., Li, F., Zhao, X., Ma, Y., Li, Y., Lin, M., Jin, G., Lu, T. J., Genin, G. M., & Xu, F. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00094 · Cited by 825
Self-citationMicrofluidic fabrication of microparticles for biomedical applications
Li, W., Zhang, L., Ge, X., Xu, B., Zhang, W., Qu, L., Choi, C.-H., Xu, J., Zhang, A., Lee, H., et al. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00263g · Cited by 585
Self-citationSun, M., Sun, X., Wang, Z., Guo, S., Yu, G., & Yang, H. (2018) · Polymers · doi:10.3390/polym10111290 · Cited by 449
Interplay between materials and microfluidics
Hou, X., Zhang, Y. S., Santiago, G. T.-D., Alvarez, M. M., Ribas, J., Jonas, S. J., Weiss, P. S., Andrews, A. M., Aizenberg, J., & Khademhosseini, A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.16 · Cited by 387
Droplet microfluidics: A tool for biology, chemistry and nanotechnology
Mashaghi, S., Abbaspourrad, A., Weitz, D. A., & van Oijen, A. M. (2016) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2016.05.019 · Cited by 374
Self-citationSarrigiannidis, S. O., Rey, J. M., Dobre, O., González-García, C., Dalby, M. J., & Salmeron-Sanchez, M. (2021) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100098 · Cited by 309
Han, Y., Yang, J., Zhao, W., Wang, H., Sun, Y., Chen, Y., Luo, J., Deng, L., Xu, X., Cui, W., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.022 · Cited by 308
Self-citationBioactive hydrogels for bone regeneration
Bai, X., Gao, M., Syed, S., Zhuang, J., Xu, X., & Zhang, X.-Q. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.05.006 · Cited by 556
“ankle, particularly when BMP-2 was added [104].”
On the road to smart biomaterials for bone research: definitions, concepts, advances, and outlook
Montoya, C., Du, Y., Gianforcaro, A. L., Orrego, S., Yang, M., & Lelkes, P. I. (2021) · Bone Research · doi:10.1038/s41413-020-00131-z · Cited by 298
Biomedical applications of gelatin methacryloyl hydrogels
Piao, Y., You, H., Xu, T., Bei, H.-P., Piwko, I. Z., Kwan, Y. Y., & Zhao, X. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.03.002 · Cited by 295
“…structures similar to the extra-cellular matrix (ECM), which allow for efficient exchange of nutrients and wastes, and have a positive effect on the adhesion, proliferation, migration, and differentiation of various cells such as keratinocytes [3] , fibroblasts [4] , and mesenchymal stem cells [5] .”
Self-citationDevelopment and future of droplet microfluidics
Nan, L., Zhang, H., Weitz, D. A., & Shum, H. C. (2024) · Lab on a Chip · doi:10.1039/d3lc00729d · Cited by 253
Self-citationWang, Y., Ma, M., Wang, J., Zhang, W., Lu, W., Gao, Y., Zhang, B., & Guo, Y. (2018) · Materials · doi:10.3390/ma11081345 · Cited by 232
Modulation of Local Overactive Inflammation via Injectable Hydrogel Microspheres
Bian, J., Cai, F., Chen, H., Tang, Z., Xi, K., Tang, J., Wu, L., Xu, Y., Deng, L., Gu, Y., et al. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c04713 · Cited by 234
Self-citationExtrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs
Davoodi, E., Sarikhani, E., Montazerian, H., Ahadian, S., Costantini, M., Swieszkowski, W., Willerth, S. M., Walus, K., Mofidfar, M., Toyserkani, E., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201901044 · Cited by 213
Growth factor delivery: Defining the next generation platforms for tissue engineering
Caballero Aguilar, L. M., Silva, S. M., & Moulton, S. E. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.05.028 · Cited by 211
Lin, S., Yang, G., Jiang, F., Zhou, M., Yin, S., Tang, Y., Tang, T., Zhang, Z., Zhang, W., & Jiang, X. (2019) · Advanced Science · doi:10.1002/advs.201900209 · Cited by 209
Ying, G., Jiang, N., Parra‐Cantu, C., Tang, G., Zhang, J., Wang, H., Chen, S., Huang, N., Xie, J., & Zhang, Y. S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003740 · Cited by 194
Self-citationHigh-efficient engineering of osteo-callus organoids for rapid bone regeneration within one month
Xie, C., Liang, R., Ye, J., Peng, Z., Sun, H., Zhu, Q., Shen, X., Hong, Y., Wu, H., Sun, W., et al. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121741 · Cited by 190
Osteogenic and angiogenic tissue formation in high fidelity nanocomposite Laponite-gelatin bioinks
Cidonio, G., Alcala-Orozco, C. R., Lim, K. S., Glinka, M., Mutreja, I., Kim, Y.-H., Dawson, J. I., Woodfield, T. B. F., & Oreffo, R. O. C. (2019) · Biofabrication · doi:10.1088/1758-5090/ab19fd · Cited by 190
“communication and mechanosensing) [17,18], typically provided by low GelMA”
BackgroundPercival, K. M., Paul, V., & Husseini, G. A. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25116012 · Cited by 183
“However, a significant drawback of ceramic materials remains their brittleness.”
BackgroundHsu, R., Chen, P., Fang, J., Chen, Y., Chang, C., Lu, Y., & Hu, S. (2019) · Advanced Science · doi:10.1002/advs.201900520 · Cited by 178
Cell-laden microfluidic microgels for tissue regeneration
Jiang, W., Li, M., Chen, Z., & Leong, K. W. (2016) · Lab on a Chip · doi:10.1039/c6lc01193d · Cited by 177
Droplet-based microfluidics in biomedical applications
Amirifar, L., Besanjideh, M., Nasiri, R., Shamloo, A., Nasrollahi, F., de Barros, N. R., Davoodi, E., Erdem, A., Mahmoodi, M., Hosseini, V., et al. (2022) · Biofabrication · doi:10.1088/1758-5090/ac39a9 · Cited by 174
“For osteogenesis, droplets containing bone marrow-derived MSCs (BMSCs), bone morphogenic protein-2 (BMP-2) osteogenic growth factor, and photo-crosslinkable gelatin-methacryloyl (GelMA) were formed via a microfluidic platform and then transformed into microgels [175].”
Free and hydrogel encapsulated exosome-based therapies in regenerative medicine
Akbari, A., Jabbari, N., Sharifi, R., Ahmadi, M., Vahhabi, A., Seyedzadeh, S. J., Nawaz, M., Szafert, S., Mahmoodi, M., Jabbari, E., et al. (2020) · Life Sciences · doi:10.1016/j.lfs.2020.117447 · Cited by 171
Noncontact and Nonintrusive Microwave-Microfluidic Flow Sensor for Energy and Biomedical Engineering
Zarifi, M. H., Sadabadi, H., Hejazi, S. H., Daneshmand, M., & Sanati-Nezhad, A. (2018) · Scientific Reports · doi:10.1038/s41598-017-18621-2 · Cited by 170
Ball‐Bearing‐Inspired Polyampholyte‐Modified Microspheres as Bio‐Lubricants Attenuate Osteoarthritis
Yang, J., Han, Y., Lin, J., Zhu, Y., Wang, F., Deng, L., Zhang, H., Xu, X., & Cui, W. (2020) · Small · doi:10.1002/smll.202004519 · Cited by 160
Self-citationBone‐a‐Petite: Engineering Exosomes towards Bone, Osteochondral, and Cartilage Repair
Bei, H. P., Hung, P. M., Yeung, H. L., Wang, S., & Zhao, X. (2021) · Small · doi:10.1002/smll.202101741 · Cited by 165
Self-citationFundamental properties of smart hydrogels for tissue engineering applications: A review
Khan, M. U. A., Stojanović, G. M., Abdullah, M. F. B., Dolatshahi-Pirouz, A., Marei, H. E., Ashammakhi, N., & Hasan, A. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127882 · Cited by 161
Hydrogel Network Dynamics Regulate Vascular Morphogenesis
Wei, Z., Schnellmann, R., Pruitt, H. C., & Gerecht, S. (2020) · Cell Stem Cell · doi:10.1016/j.stem.2020.08.005 · Cited by 162
Ma, Y., Ji, Y., Zhong, T., Wan, W., Yang, Q., Li, A., Zhang, X., & Lin, M. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00601 · Cited by 158
3D Bioprinting of Methylcellulose/Gelatin-Methacryloyl (MC/GelMA) Bioink with High Shape Integrity
Rastin, H., Ormsby, R. T., Atkins, G. J., & Losic, D. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00169 · Cited by 159
Yang, J., Zhu, Y. S., Wang, F., Deng, L., Xu, X., & Cui, W. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126004 · Cited by 156
Self-citationMicrofluidic Formulation of Topological Hydrogels for Microtissue Engineering
Rojek, K. O., Ćwiklińska, M., Kuczak, J., & Guzowski, J. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00798 · Cited by 149
An overview of hydrogel-based intra-articular drug delivery for the treatment of osteoarthritis
He, Z., Wang, B., Hu, C., & Zhao, J. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.03.003 · Cited by 161
Lu, S., Cuzzucoli, F., Jiang, J., Liang, L.-G., Wang, Y., Kong, M., Zhao, X., Cui, W., Li, J., & Wang, S. (2018) · Lab on a Chip · doi:10.1039/c8lc00852c · Cited by 144
Self-citationLiving and Injectable Porous Hydrogel Microsphere with Paracrine Activity for Cartilage Regeneration
Li, X., Li, X., Yang, J., Lin, J., Zhu, Y., Xu, X., & Cui, W. (2023) · Small · doi:10.1002/smll.202207211 · Cited by 165
Self-citationEmerging Biofabrication Techniques: A Review on Natural Polymers for Biomedical Applications
Puertas‐Bartolomé, M., Mora‐Boza, A., & García‐Fernández, L. (2021) · Polymers · doi:10.3390/polym13081209 · Cited by 160
“GelMA Capillary Photopolymerization ≈165 μm no bMSCs [53]”
BackgroundLi, F., Truong, V. X., Thissen, H. W., Frith, J. E., & Forsythe, J. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00728 · Cited by 148
Hydrogels Based Drug Delivery Synthesis, Characterization and Administration
Onaciu, A., Munteanu, R. A., Moldovan, A. I., Moldovan, C. S., & Berindan‐Neagoe, I. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11090432 · Cited by 161
“This microfluidic approach demonstrates the feasibility of this method in osteogenesis [217].”
MethodStem cell-laden injectable hydrogel microspheres for cancellous bone regeneration
Wu, J., Li, G., Ye, T., Lu, G., Li, R., Deng, L., Wang, L., Cai, M., & Cui, W. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124715 · Cited by 148
Self-citationElectro‐Assisted Bioprinting of Low‐Concentration GelMA Microdroplets
Xie, M., Gao, Q., Zhao, H., Nie, J., Fu, Z., Wang, H., Chen, L., Shao, L., Fu, J., Chen, Z., et al. (2019) · Small · doi:10.1002/smll.201804216 · Cited by 135
Self-citationBiopolymer Microparticles Prepared by Microfluidics for Biomedical Applications
Jo, Y. K., & Lee, D. (2019) · Small · doi:10.1002/smll.201903736 · Cited by 151
Suction Cups‐Inspired Adhesive Patch with Tailorable Patterns for Versatile Wound Healing
Huang, R., Zhang, X., Li, W., Shang, L., Wang, H., & Zhao, Y. (2021) · Advanced Science · doi:10.1002/advs.202100201 · Cited by 148
Self-citationKim, H., Bae, C., Kook, Y.-M., Koh, W., Lee, K., & Park, M. H. (2019) · Stem Cell Research & Therapy · doi:10.1186/s13287-018-1130-8 · Cited by 147
All-Aqueous-Phase Microfluidics for Cell Encapsulation
Zhu, K., Yu, Y., Cheng, Y., Tian, C., Zhao, G., & Zhao, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19234 · Cited by 132
Yang, Y., Xu, T., Zhang, Q., Piao, Y., Bei, H., & Zhao, X. (2021) · Small · doi:10.1002/smll.202006598 · Cited by 138
Self-citationBiomedical application of photo-crosslinked gelatin hydrogels
Xiang, L., & Cui, W. (2021) · Journal of Leather Science and Engineering · doi:10.1186/s42825-020-00043-y · Cited by 147
“[94] Xiang and Cui Journal of Leather Science and Engineering (2021) 3:3 Page 8 of 24”
BackgroundSelf-citationBiomass Microcapsules with Stem Cell Encapsulation for Bone Repair
Yang, L., Liu, Y., Sun, L., Zhao, C., Chen, G., & Zhao, Y. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00747-8 · Cited by 147
“Although stem cell therapy has become a promising clinical approach [8], direct injection of stem cells into the target tissues will possibly result in decreasing cell viability, retention, and engraftment, which have largely limited the practical application of stem cell therapy [6].”
BackgroundCartilage tissue formation through assembly of microgels containing mesenchymal stem cells
Li, F., Truong, V. X., Fisch, P., Levinson, C., Glattauer, V., Zenobi‐Wong, M., Thissen, H. W., Forsythe, J. S., & Frith, J. E. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.015 · Cited by 134
Gas‐Shearing Fabrication of Multicompartmental Microspheres: A One‐Step and Oil‐Free Approach
Tang, G., Xiong, R., Lv, D., Xu, R. X., Braeckmans, K., Huang, C., & Smedt, S. C. D. (2019) · Advanced Science · doi:10.1002/advs.201802342 · Cited by 129
Zhuang, Z., Zhang, Y., Sun, S., Li, Q., Chen, K., An, C., Wang, L., van den Beucken, J. J. J. P., & Wang, H. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00295 · Cited by 126
Self-citationFang, Y., Guo, Y., Ji, M., Li, B., Guo, Y., Zhu, J., Zhang, T., & Xiong, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109810 · Cited by 127
Gelatin methacryloyl (GelMA)-based biomaterials for bone regeneration
Dong, Z., Yuan, Q., Huang, K., Xu, W., Liu, G., & Gu, Z. (2019) · RSC Advances · doi:10.1039/c9ra02695a · Cited by 123
de Lima, C. S. A., Balogh, T. S., Varca, J. P. R. O., Varca, G. H. C., Lugão, A. B., Camacho‐Cruz, L. A., Bucio, E., & Kadłubowski, S. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12100970 · Cited by 141
“In the tissue engineering field, osteogenic bone mesenchymal stem cells are applied to repair bone injuries; however, low cell retention is still a disadvantage in this technique [75].”
BackgroundChemical communication at the synthetic cell/living cell interface
Mukwaya, V., Mann, S., & Dou, H. (2021) · Communications Chemistry · doi:10.1038/s42004-021-00597-w · Cited by 119
Zhao, H., Chen, Y., Shao, L., Xie, M., Nie, J., Qiu, J., Zhao, P., Ramezani, H., Fu, J., Ouyang, H., et al. (2018) · Small · doi:10.1002/smll.201802630 · Cited by 120
Self-citationIntelligent Vascularized 3D/4D/5D/6D-Printed Tissue Scaffolds
Han, X., Saiding, Q., Cai, X., Xiao, Y., Wang, P., Cai, Z., Gong, X., Gong, W., Zhang, X., & Cui, W. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01187-2 · Cited by 154
“…altered or excreted from the body but also extend the blood circulation time and improve the stability of the drugs, enhance drug accumulation, improve the killing efficiency of the drugs while increasing the drug tolerability, and even enable synergistic treatment with multiple drugs [92, 177].”
BackgroundSelf-citationMamidi, N., Ijadi, F., & Norahan, M. H. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00279 · Cited by 120
Wang, H., Liu, H., Liu, H., Su, W., Chen, W., & Qin, J. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800632 · Cited by 114
Self-citationCombining Stem Cells and Biomaterial Scaffolds for Constructing Tissues and Cell Delivery
Willerth, S. M., & Sakiyama‐Elbert, S. E. (2019) · StemJournal · doi:10.3233/stj-180001 · Cited by 125
“A recent study also highlighted how GelMa microspheres containing bone marrow-derived stem cells could be injected in vivo for bone tissue engineering application [59].”
BackgroundChen, Z., Lv, Z., Zhuang, Y., Saiding, Q., Wu, Y. B., Xiong, W., Zhang, Z., Chen, H., Cui, W., & Zhang, Y. (2023) · Advanced Materials · doi:10.1002/adma.202300180 · Cited by 139
Self-citationMicrocapsule production by droplet microfluidics: A review from the material science approach
Durán, M., Serrano, Á., Nikulin, A., Dauvergne, J., Derzsi, L., & del Barrio, E. P. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111230 · Cited by 118
Hou, Y., Xie, W., Achazi, K., Cuellar-Camacho, J. L., Melzig, M. F., Chen, W., & Haag, R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.003 · Cited by 104
Photocrosslinkable nanocomposite ink for printing strong, biodegradable and bioactive bone graft
Yang, Y., Zhang, Q., Xu, T., Zhang, H., Zhang, M., Lü, L., Hao, Y., Fuh, J. Y. H., & Zhao, X. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120378 · Cited by 109
Self-citationEnhancing survival, engraftment, and osteogenic potential of mesenchymal stem cells
García‐Sánchez, D., Fernández, D., Rodríguez-Rey, J. C., & Pérez-Campo, F. M. (2019) · World Journal of Stem Cells · doi:10.4252/wjsc.v11.i10.748 · Cited by 112
Microfluidic Templated Stem Cell Spheroid Microneedles for Diabetic Wound Treatment
Wu, X., Huang, D., Xu, Y., Chen, G., & Zhao, Y. (2023) · Advanced Materials · doi:10.1002/adma.202301064 · Cited by 113
NK-Cell-Encapsulated Porous Microspheres via Microfluidic Electrospray for Tumor Immunotherapy
Wu, D., Yu, Y., Zhao, C., Shou, X., Piao, Y., Zhao, X., Zhao, Y., & Wang, S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b12816 · Cited by 102
Self-citationEngineered Microsystems for Spheroid and Organoid Studies
Kang, S., Kim, D., Lee, J., Takayama, S., & Park, J. Y. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202001284 · Cited by 100
Zhang, Y., Li, C., Zhang, W., Deng, J., Nie, Y., Du, X., Qin, L., & Lai, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.12.032 · Cited by 125
Zhu, Y., Yu, X., Liu, H., Li, J., Gholipourmalekabadi, M., Lin, K., Yuan, C., & Wang, P. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.04.032 · Cited by 168
“Previous studies have demonstrated that GelMA can effectively promote osteogenic differentiation of MSCs [13], BMSCs [14], and hMSCs [15].”
BackgroundThe diverse roles of hydrogel mechanics in injectable stem cell transplantation
Foster, A. A., Marquardt, L. M., & Heilshorn, S. C. (2016) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2016.11.003 · Cited by 105
“For example, injectable gelatin-methacrylate (GelMA) microcarriers have been designed using microfluidic platforms to generate droplets of controllable sizes, which are then crosslinked with ultraviolet light [39,43].”
Hao, J., Bai, B., Ci, Z., Tang, J., Hu, G., Dai, C., Yu, M., Li, M., Zhang, W., Zhang, Y., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.12.013 · Cited by 105
Biopolymer-Based Microcarriers for Three-Dimensional Cell Culture and Engineered Tissue Formation
Huang, L., Abdalla, A. M. E., Xiao, L. J., & Yang, G. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21051895 · Cited by 100
Microskin‐Inspired Injectable MSC‐Laden Hydrogels for Scarless Wound Healing with Hair Follicles
Zheng, X. M., Ding, Z., Cheng, W., Lü, Q., Kong, X., Zhou, X., Lu, G., & Kaplan, D. L. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000041 · Cited by 96
Functional microspheres for tissue regeneration
Li, Q., Chang, B., He, D., & Liu, X. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.07.025 · Cited by 138
Bioprinting microporous functional living materials from protein-based core-shell microgels
Ou, Y., Cao, S., Zhang, Y., Zhu, H., Guo, C., Yan, W., Xin, F., Dong, W., Zhang, Y., Narita, M., et al. (2023) · Nature Communications · doi:10.1038/s41467-022-35140-5 · Cited by 111
Recent advances in microfluidic 3D cellular scaffolds for drug assays
Wu, J., Chen, Q., Liu, W., He, Z., & Lin, J. (2016) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2016.11.009 · Cited by 99
Shedding light on 3D printing: Printing photo-crosslinkable constructs for tissue engineering
Zhang, Q., Bei, H., Zhao, M., Dong, Z., & Zhao, X. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121566 · Cited by 97
Self-citationPorous calcium phosphate glass microspheres for orthobiologic applications
Hossain, K. M. Z., Patel, U., Kennedy, A. R., Macrí-Pellizzeri, L., Sottile, V., Grant, D. M., Scammell, B. E., & Ahmed, I. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.040 · Cited by 108
Guo, Z., Dong, L., Xia, J., Mi, S., & Sun, W. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100036 · Cited by 94
Fabricated technology of biomedical micro-nano hydrogel
Yang, S. F., Wang, F., Han, H., Santos, H. A., Zhang, Y., Zhang, H., Wei, J., & Cai, Z. (2022) · Biomedical Technology · doi:10.1016/j.bmt.2022.11.012 · Cited by 94
“prepared an injectable hydrogel microsphere loaded with mesenchymal stem cells and growth factors, this gentle gelling condition minimizes damage to the incorporated cells and proteins [77].”
Controlling Differentiation of Stem Cells for Developing Personalized Organ‐on‐Chip Platforms
Geraili, A., Jafari, P., Hassani, M. S., Araghi, B. H., Mohammadi, M. H., Ghafari, A. M., Tamrin, S. H., Modarres, H. P., Kolahchi, A. R., Ahadian, S., et al. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700426 · Cited by 88
Yang, T. Q., Zhang, Q., Li, X., Zhang, R., Qian, R., Tian, Y., Chen, G., & Tian, W. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111850 · Cited by 99
Man, K., Barroso, I. A., Brunet, M. Y., Peacock, B., Federici, A., Hoey, D. A., & Cox, S. C. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23020832 · Cited by 94
Gelatin Matrices for Growth Factor Sequestration
Buie, T., McCune, J. T., & Cosgriff‐Hernandez, E. (2020) · Trends in biotechnology · doi:10.1016/j.tibtech.2019.12.005 · Cited by 87
Bio-inspired lubricant drug delivery particles for the treatment of osteoarthritis
Yang, L., Liu, Y., Shou, X., Ni, D., Kong, T., & Zhao, Y. (2020) · Nanoscale · doi:10.1039/d0nr04013d · Cited by 83
Dual-Core Prebiotic Microcapsule Encapsulating Probiotics for Metabolic Syndrome
Zhao, C., Zhu, Y., Kong, B., Huang, Y., Yan, D., Tan, H. F., & Shang, L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c13518 · Cited by 87
An injectable hemostatic PEG-based hydrogel with on-demand dissolution features for emergency care
Shi, J., Wang, D., Wang, H., Yang, X., Gu, S., Wang, Y., Chen, Z., Chen, Y., Gao, J., Yu, L., et al. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.04.020 · Cited by 82
Self-citationWang, Y., Yuan, Z., Pang, Y., Zhang, D., Li, G., Zhang, X., Yu, Y., Yang, X., & Cai, Q. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c00192 · Cited by 81
Han, S., Xu, Y., Sun, J., Liu, Y., Zhao, Y., Tao, W. A., & Chai, R. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112073 · Cited by 93
Microfluidics for Medical Additive Manufacturing
Wang, J., Shao, C., Wang, Y., Sun, L., & Zhao, Y. (2020) · Engineering · doi:10.1016/j.eng.2020.10.001 · Cited by 86
Zhang, Q., Yang, T. Q., Zhang, R., Liang, X., Wang, G., Tian, Y., Li, X., & Tian, W. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.09.024 · Cited by 86
Recent Advances in Microgels: From Biomolecules to Functionality
Xu, Y., Zhu, H., Denduluri, A. J., Ou, Y., Erkamp, N. A., Qi, R., Shen, Y., & Knowles, T. P. J. (2022) · Small · doi:10.1002/smll.202200180 · Cited by 84
Microfluidics‐Assisted Assembly of Injectable Photonic Hydrogels toward Reflective Cooling
Zhu, Z., Liu, J., Liu, C., Wu, X., Li, Q. F., Chen, S., Zhao, X., & Weitz, D. A. (2019) · Small · doi:10.1002/smll.201903939 · Cited by 78
Self-citationYang, J., Liang, J., Zhu, Y., Hu, M., Deng, L., Cui, W., & Xu, X. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.05.024 · Cited by 79
“A previous study investigated GelMA hydrogel degradation using 2 U mL 1 of collagenase solution [39].”
MethodSelf-citationMicrocarriers in application for cartilage tissue engineering: Recent progress and challenges
Ding, S., Liu, X., Zhao, X.-Y., Wang, K., Xiong, W., Gao, Z., Sun, C.-Y., Jia, M., Li, C., Gu, Q., et al. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.01.033 · Cited by 89
Self-citationDevelopment of Cell Spheroids by Advanced Technologies
Shao, C., Chi, J., Zhang, H., Fan, Q., Zhao, Y., & Ye, F. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000183 · Cited by 83
Metadata
- Authors
- Zhao, X., Liu, S., Yildirimer, L., Zhao, H., Ding, R., Wang, H., Cui, W., & Weitz, D.
- Affiliations
- Harvard University (US)
- Shanghai Jiao Tong University (CN)
- University College London (GB)
- Corresponding author
- Cui, Wenguo
- Weitz, David
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2016-02-16
- Volume
- 26
- Issue
- 17
- Pages
- 2809-2819
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2285676653
- Cited by
- 426
- References
- 64
- Citations by year
- 2026: 26 · 2025: 44 · 2024: 46 · 2023: 40 · 2022: 53 · 2021: 60 · 2020: 57 · 2019: 45 · 2018: 27 · 2017: 18 · 2016: 9
- FWCI
- 15.91
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Funders
- US National Science Foundation (DMR-1310266)
- Harvard MRSEC (DMR-1420570)
- National Science Foundation of China (51373112, 81301545)
- Shanghai Municipal Commission of Science and Technology Program
- Rising-Star Program (15QA1403400)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- gelatin methacryloyl, photocrosslinkable hydrogels, bone marrow-derived mesenchymal stem cells, microfluidic microsphere fabrication, bone formation, bone regeneration, cell encapsulation, growth factor delivery, mineralization, cell migration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.