The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Efficiently Controlling the 3D Thermal Conductivity of a Polymer Nanocomposite via a Hyperelastic Double‐Continuous Network of Graphene and Sponge
Abstract
Graphene‐reinforced polymer composites with high thermal conductivity show attractive prospects as thermal transfer materials in many applications such as intelligent robotic skin. However, for the most reported composites, precise control of the thermal conductivity is not easily achieved, and the improvement efficiency is usually low. To effectively control the 3D thermal conductivity of graphene‐reinforced polymer nanocomposites, a hyperelastic double‐continuous network of graphene and sponge is developed. The structure (orientation, density) and thermal conductivity (in‐plane, cross‐plane) of the resulting composites can be effectively controlled by adjusting the preparation and deformation parameters (unidirectional, multidirectional) of the network. Based on the experimental and theoretical simulation results, the thermal conduction mechanism is summarized as a two‐stage transmission of phonons. The in‐plane thermal conductivity increases from 0.175 to 1.68 W m−1 K−1 when the directional compression ratio increases from 0% to 95%, and the corresponding enhancement efficiency exceeds 300. The 3D thermal conductivity reaches a maximum of 2.19 W m−1 K−1 when the compression ratio is 70% in three directions, and the graphene content is 4.82 wt%. Moreover, the thermal conduction network can be largely prepared by power‐driven roller equipment, making the composite an ideal candidate for sensitive robotic skin for temperature detection.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Reduced graphene oxide by chemical graphitization
Moon, I. K., Lee, J., Ruoff, R. S., & Lee, H. (2010) · Nature Communications · doi:10.1038/ncomms1067 · Cited by 2,135
Thermal conductivity of polymer-based composites: Fundamentals and applications
Chen, H., Ginzburg, V. V., Yang, J., Yang, Y., Liu, W., Huang, Y., Du, L., & Chen, B. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.03.001 · Cited by 2,049
Yu, Q., Jauregui, L. A., Wu, W., Colby, R., Tian, J., Su, Z., Cao, H., Liu, Z., Pandey, D., Wei, D., et al. (2011) · Nature Materials · doi:10.1038/nmat3010 · Cited by 1,497
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Ultrathin conformal devices for precise and continuous thermal characterization of human skin
Webb, R. C., Bonifas, A. P., Behnaz, A., Zhang, Y., Yu, K. J., Cheng, H., Shi, M., Bian, Z., Liu, Z., Kim, Y.-S., et al. (2013) · Nature Materials · doi:10.1038/nmat3755 · Cited by 1,229
Cited by
Poly(N-isopropylacrylamide)-based smart hydrogels: Design, properties and applications
Tang, L., Wang, L., Yang, X., Feng, Y., Li, Y., & Feng, W. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100702 · Cited by 866
Self-citationFactors affecting thermal conductivities of the polymers and polymer composites: A review
Guo, Y., Ruan, K., Shi, X., Yang, X., & Gu, J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108134 · Cited by 865
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Self-citationRecent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
Wang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Jia, C., Li, L., Liu, Y., Fang, B., Ding, H., Song, J., Liu, Y., Xiang, K., Lin, S., Li, Z., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17533-6 · Cited by 412
Thermal conductivity of graphene-based polymer nanocomposites
Huang, X., Zhi, C., Lin, Y., Bao, H., Wu, G., Jiang, P., & Mai, Y.-W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100577 · Cited by 410
Carbon-based functional nanomaterials: Preparation, properties and applications
Li, Z., Wang, L., Li, Y., Feng, Y., & Feng, W. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.04.028 · Cited by 384
Self-citationZhang, F., Feng, Y., Qin, M., Gao, L., Li, Z., Zhao, F., Zhang, Z., Lv, F., & Feng, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901383 · Cited by 308
Self-citationWu, H.-Y., Li, S.-T., Shao, Y.-W., Jin, X.-Z., Qi, X.-D., Yang, J.-H., Zhou, Z.-W., & Wang, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122373 · Cited by 291
Liu, P., Li, X., Min, P., Chang, X., Shu, C., Ding, Y., & Yu, Z.-Z. (2021) · Nano-Micro Letters · doi:10.1007/s40820-020-00548-5 · Cited by 278
Xu, X., Hu, R., Chen, M., Dong, J., Xiao, B., Wang, Q., & Wang, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125447 · Cited by 272
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Advanced multifunctional composite phase change materials based on photo-responsive materials
Tang, Z., Gao, H., Chen, X., Zhang, Y., Li, A., & Wang, G. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105454 · Cited by 240
Metadata
- Authors
- Qin, M., Xu, Y., Cao, R., Feng, W., & Chen, L.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-09-21
- Volume
- 28
- Issue
- 45
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2890610609
- Cited by
- 258
- References
- 48
- FWCI
- 10.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.