The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Efficiently Controlling the 3D Thermal Conductivity of a Polymer Nanocomposite via a Hyperelastic Double‐Continuous Network of Graphene and Sponge
Abstract
Graphene‐reinforced polymer composites with high thermal conductivity show attractive prospects as thermal transfer materials in many applications such as intelligent robotic skin. However, for the most reported composites, precise control of the thermal conductivity is not easily achieved, and the improvement efficiency is usually low. To effectively control the 3D thermal conductivity of graphene‐reinforced polymer nanocomposites, a hyperelastic double‐continuous network of graphene and sponge is developed. The structure (orientation, density) and thermal conductivity (in‐plane, cross‐plane) of the resulting composites can be effectively controlled by adjusting the preparation and deformation parameters (unidirectional, multidirectional) of the network. Based on the experimental and theoretical simulation results, the thermal conduction mechanism is summarized as a two‐stage transmission of phonons. The in‐plane thermal conductivity increases from 0.175 to 1.68 W m−1 K−1 when the directional compression ratio increases from 0% to 95%, and the corresponding enhancement efficiency exceeds 300. The 3D thermal conductivity reaches a maximum of 2.19 W m−1 K−1 when the compression ratio is 70% in three directions, and the graphene content is 4.82 wt%. Moreover, the thermal conduction network can be largely prepared by power‐driven roller equipment, making the composite an ideal candidate for sensitive robotic skin for temperature detection.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Reduced graphene oxide by chemical graphitization
Moon, I. K., Lee, J., Ruoff, R. S., & Lee, H. (2010) · Nature Communications · doi:10.1038/ncomms1067 · Cited by 2,135
Thermal conductivity of polymer-based composites: Fundamentals and applications
Chen, H., Ginzburg, V. V., Yang, J., Yang, Y., Liu, W., Huang, Y., Du, L., & Chen, B. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.03.001 · Cited by 2,049
Yu, Q., Jauregui, L. A., Wu, W., Colby, R., Tian, J., Su, Z., Cao, H., Liu, Z., Pandey, D., Wei, D., et al. (2011) · Nature Materials · doi:10.1038/nmat3010 · Cited by 1,497
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Ultrathin conformal devices for precise and continuous thermal characterization of human skin
Webb, R. C., Bonifas, A. P., Behnaz, A., Zhang, Y., Yu, K. J., Cheng, H., Shi, M., Bian, Z., Liu, Z., Kim, Y.-S., et al. (2013) · Nature Materials · doi:10.1038/nmat3755 · Cited by 1,229
Yu, A., Ramesh, P., Sun, X., Bekyarova, E., Itkis, M. E., & Haddon, R. C. (2008) · Advanced Materials · doi:10.1002/adma.200800401 · Cited by 972
Shen, B., Zhai, W., & Zheng, W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400079 · Cited by 922
Song, S. H., Park, K. H., Kim, B. H., Choi, Y. W., Jun, G. H., Lee, D. J., Kong, B., Paik, K., & Jeon, S. (2013) · Advanced Materials · doi:10.1002/adma.201202736 · Cited by 667
Wu, T., Zhang, X., Yuan, Q., Xue, J., Lu, G., Liu, Z., Wang, H., Wang, H., Ding, F., Yu, Q., et al. (2016) · Nature Materials · doi:10.1038/nmat4477 · Cited by 620
The gentle touch receptors of mammalian skin
Zimmerman, A., Bai, L., & Ginty, D. D. (2014) · Science · doi:10.1126/science.1254229 · Cited by 617
Thermally Conductive Graphene-Polymer Composites: Size, Percolation, and Synergy Effects
Shtein, M., Nadiv, R., Buzaglo, M., Kahil, K., & Regev, O. (2015) · Chemistry of Materials · doi:10.1021/cm504550e · Cited by 606
Wu, Y., Yi, N., Huang, L., Zhang, T., Fang, S., Chang, H., Li, N., Oh, J., Lee, J. A., Kozlov, M., et al. (2015) · Nature Communications · doi:10.1038/ncomms7141 · Cited by 546
Large‐Area Freestanding Graphene Paper for Superior Thermal Management
Xin, G., Sun, H., Hu, T., Fard, H. R., Sun, X., Koratkar, N., Borca‐Tasciuc, T., & Lian, J. (2014) · Advanced Materials · doi:10.1002/adma.201400951 · Cited by 471
Ge, J., Sun, L., Zhang, F., Zhang, Y., Shi, L., Zhao, H., Zhu, H., Jiang, H., & Yu, S. (2016) · Advanced Materials · doi:10.1002/adma.201504239 · Cited by 466
Yang, J., Qi, G.-Q., Liu, Y., Bao, R.-Y., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2016) · Carbon · doi:10.1016/j.carbon.2016.01.063 · Cited by 415
Thermal Expansion of Graphene Composites
Wang, S., Tambraparni, M., Qiu, J., Tipton, J., & Dean, D. (2009) · Macromolecules · doi:10.1021/ma900631c · Cited by 387
Lian, G., Tuan, C.-C., Li, L., Jiao, S., Wang, Q., Moon, K.-S., Cui, D., & Wong, C.-P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01595 · Cited by 382
Yang, X., Liang, C., Ma, T., Guo, Y., Kong, J., Gu, J., Chen, M., & Zhu, J. (2018) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0031-8 · Cited by 372
Modeling of Thermal Transport in Pillared-Graphene Architectures
Varshney, V., Patnaik, S. S., Roy, A. K., Froudakis, G., & Farmer, B. L. (2010) · ACS Nano · doi:10.1021/nn901341r · Cited by 316
Kim, H.-J., Sim, K., Thukral, A., & Yu, C. (2017) · Science Advances · doi:10.1126/sciadv.1701114 · Cited by 274
Effect of graphene aerogel on thermal behavior of phase change materials for thermal management
Zhong, Y., Zhou, M., Huang, F., Lin, T., & Wan, D. (2013) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2013.01.046 · Cited by 265
An, F., Li, X., Min, P., Li, H., Dai, Z., & Yu, Z.-Z. (2018) · Carbon · doi:10.1016/j.carbon.2017.10.011 · Cited by 236
Prasher, R. (2010) · Science · doi:10.1126/science.1188998 · Cited by 234
Mechanically robust honeycomb graphene aerogel multifunctional polymer composites
Zhang, Q., Xu, X., Li, H., Xiong, G., Hu, H., & Fisher, T. S. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.102 · Cited by 216
Fang, H., Zhao, Y., Zhang, Y., Ren, Y., & Bai, S.-L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07650 · Cited by 206
Yang, J., Li, X., Han, S., Zhang, Y., Min, P., Koratkar, N., & Yu, Z.-Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07869a · Cited by 201
High-Density 3D-Boron Nitride and 3D-Graphene for High-Performance Nano–Thermal Interface Material
Loeblein, M., Tsang, S. H., Pawlik, M., Phua, E. J. R., Yong, H., Zhang, X. W., Gan, C. L., & Teo, E. H. T. (2017) · ACS Nano · doi:10.1021/acsnano.6b08218 · Cited by 200
Study on thermal properties of graphene foam/graphene sheets filled polymer composites
Zhao, Y.-H., Wu, Z.-K., & Bai, S.-L. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.02.011 · Cited by 197
Su, Y., Li, J. J., & Weng, G. J. (2018) · Carbon · doi:10.1016/j.carbon.2018.05.033 · Cited by 185
Alam, F. E., Dai, W., Yang, M., Du, S., Li, X., Yu, J., Jiang, N., & Lin, C.-T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00750g · Cited by 176
Toward highly thermally conductive all-carbon composites: Structure control
Feng, W., Qin, M., & Feng, Y. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.059 · Cited by 174
Self-citationInterface-mediated extremely low thermal conductivity of graphene aerogel
Xie, Y., Xu, S., Xu, Z., Wu, H., Deng, C., & Wang, X. (2015) · Carbon · doi:10.1016/j.carbon.2015.11.033 · Cited by 159
Graphene woven fabric-reinforced polyimide films with enhanced and anisotropic thermal conductivity
Gong, J., Liu, Z., Yu, J., Dai, D., Dai, W., Du, S., Li, C., Jiang, N., Zhan, Z., & Lin, C. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.010 · Cited by 149
Microstructure engineering of graphene towards highly thermal conductive composites
Fang, H., Bai, S., & Wong, C. P. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.06.010 · Cited by 138
Liu, Z., Shen, D., Yu, J., Dai, W., Li, C., Du, S., Jiang, N., Li, H., & Lin, C. (2016) · RSC Advances · doi:10.1039/c5ra27223h · Cited by 122
Wang, S., Gong, L., Shang, Z., Ding, L., Yin, G., Jiang, W., Gong, X., & Xuan, S. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707538 · Cited by 101
Three-Dimensional Graphene Foam–Polymer Composite with Superior Deicing Efficiency and Strength
Bustillos, J., Zhang, C., Boesl, B., & Agarwal, A. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18346 · Cited by 88
Qin, M., Feng, Y., Ji, T., & Feng, W. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.001 · Cited by 82
Self-citationLoeblein, M., Bolker, A., Tsang, S. H., Atar, N., Uzan, C., Verker, R., Gouzman, I., Grossman, E., & Teo, E. H. T. (2015) · Small · doi:10.1002/smll.201502670 · Cited by 81
RGO/TPU composite with a segregated structure as thermal interface material
Li, A., Zhang, C., & Zhang, Y. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.06.009 · Cited by 69
Warzoha, R. J., & Fleischer, A. S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502819q · Cited by 68
Thermal conductivities of PU composites with graphene aerogels reduced by different methods
Li, A., Zhang, C., & Zhang, Y. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.10.004 · Cited by 36
Thermal properties of polymer composites reinforced with graphene foam/graphene sheets
Zhao, Y., & Wu, Z. (2015) · Cited by 18
Cited by
Poly(N-isopropylacrylamide)-based smart hydrogels: Design, properties and applications
Tang, L., Wang, L., Yang, X., Feng, Y., Li, Y., & Feng, W. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100702 · Cited by 866
Self-citationFactors affecting thermal conductivities of the polymers and polymer composites: A review
Guo, Y., Ruan, K., Shi, X., Yang, X., & Gu, J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108134 · Cited by 865
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Self-citationRecent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
Wang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Metadata
- Authors
- Qin, M., Xu, Y., Cao, R., Feng, W., & Chen, L.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-09-21
- Volume
- 28
- Issue
- 45
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2890610609
- Cited by
- 258
- References
- 48
- FWCI
- 10.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.