The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Graphitic Nanocarbon with Engineered Defects for High‐Performance Potassium‐Ion Battery Anodes
Abstract
The application of graphite anodes in potassium‐ion batteries (KIB) is limited by the large variation in lattice volume and the low diffusion coefficient of potassium ions during (de)potassiation. This study demonstrates nitrogen‐doped, defect‐rich graphitic nanocarbons (GNCs) as high‐performance KIB anodes. The GNCs with controllable defect densities are synthesized by annealing an ethylenediaminetetraacetic acid nickel coordination compound. The GNCs show better performance than the previously reported thin‐walled graphitic carbonaceous materials such as carbon nanocages and nanotubes. In particular, the GNC prepared at 600 °C shows a stabilized capacity of 280 mAh g−1 at 50 mA g−1, robust rate capability, and long cycling life due to its high‐nitrogen‐doping, short‐range‐ordered, defect‐rich graphitic structure. A high capacity of 189 mAh g−1 with a long cycle life over 200 cycles is demonstrated at a current density of 200 mA g−1. Further, it is confirmed that the potassium ion storage mechanism of GNCs is different from that of graphite using multiple characterization methods. Specifically, the GNCs with numerous defects provide more active sites for the potassiation process, which results in a final discharge product with short‐range order. This study opens a new pathway for designing graphitic carbonaceous materials for KIB anodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Carbon Electrodes for K-Ion Batteries
Jian, Z., Luo, W., & Ji, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06809 · Cited by 1,866
The Mechanisms of Lithium and Sodium Insertion in Carbon Materials
Stevens, D. A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379565 · Cited by 1,499
Sodium and Sodium‐Ion Batteries: 50 Years of Research
Delmas, C. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703137 · Cited by 1,361
Xu, Y., Zhang, C., Zhou, M., Fu, Q., Zhao, C., Wu, M., & Lei, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-04190-z · Cited by 1,149
Current status and challenges for automotive battery production technologies
Kwade, A., Haselrieder, W., Leithoff, R., Modlinger, A., Dietrich, F., & Droeder, K. (2018) · Nature Energy · doi:10.1038/s41560-018-0130-3 · Cited by 1,133
Komaba, S., Hasegawa, T., Dahbi, M., & Kubota, K. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2015.09.002 · Cited by 1,104
An Initial Review of the Status of Electrode Materials for Potassium‐Ion Batteries
Pramudita, J. C., Sehrawat, D., Goonetilleke, D., & Sharma, N. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602911 · Cited by 1,045
New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon
Bommier, C., Surta, T. W., Dolgos, M., & Ji, X. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01969 · Cited by 998
Hard Carbon Microspheres: Potassium‐Ion Anode Versus Sodium‐Ion Anode
Jian, Z., Xing, Z., Bommier, C., Li, Z., & Ji, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501874 · Cited by 985
Highly Stable Aqueous Zinc‐Ion Storage Using a Layered Calcium Vanadium Oxide Bronze Cathode
Xia, C., Guo, J., Li, P., Zhang, X., & Alshareef, H. N. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201713291 · Cited by 946
Self-citationPotassium Ion Batteries with Graphitic Materials
Luo, W., Wan, J., Ozdemir, B., Bao, W., Chen, Y., Dai, J., Lin, H., Xu, Y., Gu, F., Barone, V., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03667 · Cited by 929
Yang, J., Ju, Z., Jiang, Y., Xing, Z., Xi, B., Feng, J., & Xiong, S. (2018) · Advanced Materials · doi:10.1002/adma.201700104 · Cited by 849
Universal quinone electrodes for long cycle life aqueous rechargeable batteries
Liang, Y., Jing, Y., Gheytani, S., Lee, K.-Y., Liu, P., Facchetti, A., & Yao, Y. (2017) · Nature Materials · doi:10.1038/nmat4919 · Cited by 807
Recent Progress and Perspective in Electrode Materials for K‐Ion Batteries
Kim, H., Kim, J. C., Bianchini, M., Seo, D., Rodríguez-García, J., & Ceder, G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201702384 · Cited by 737
Mechanism of lithium insertion in hard carbons prepared by pyrolysis of epoxy resins
Liu, Y., Xue, J. S., Zheng, T., & Dahn, J. R. (1996) · Carbon · doi:10.1016/0008-6223(96)00177-7 · Cited by 732
Role of Nitrogen-Doped Graphene for Improved High-Capacity Potassium Ion Battery Anodes
Share, K., Cohn, A. P., Carter, R., Rogers, B., & Pint, C. L. (2016) · ACS Nano · doi:10.1021/acsnano.6b05998 · Cited by 725
Saurel, D., Orayech, B., Xiao, B., Carriazo, D., Li, X., & Rojo, T. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703268 · Cited by 668
Electrochemical Intercalation of Potassium into Graphite
Zhao, J., Zou, X., Zhu, Y., Xu, Y., & Wang, C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602248 · Cited by 647
Short‐Range Order in Mesoporous Carbon Boosts Potassium‐Ion Battery Performance
Wang, W., Zhou, J., Wang, Z., Zhao, L., Li, P., Yang, Y., Yang, C., Huang, H., & Guo, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701648 · Cited by 575
A manganese–hydrogen battery with potential for grid-scale energy storage
Chen, W., Li, G., Pei, A., Li, Y., Liao, L., Wang, H., Wan, J., Liang, Z., Chen, G., Zhang, H., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0147-7 · Cited by 561
Graphitic Carbon Nanocage as a Stable and High Power Anode for Potassium‐Ion Batteries
Cao, B., Zhang, Q., Liu, H., Xu, B., Zhang, S., Zhou, T., Mao, J., Pang, W. K., Guo, Z., Li, A., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801149 · Cited by 561
Nitrogen-rich hard carbon as a highly durable anode for high-power potassium-ion batteries
Chen, C., Wang, Z., Zhang, B., Miao, L., Cai, J., Peng, L., Huang, Y., Jiang, J., Huang, Y., Zhang, L., et al. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.010 · Cited by 468
Sulfur/Oxygen Codoped Porous Hard Carbon Microspheres for High‐Performance Potassium‐Ion Batteries
Chen, M., Wang, W., Liang, X., Gong, S., Liu, J., Wang, Q., Guo, S., & Yang, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800171 · Cited by 454
Xie, Y., Chen, Y., Liu, L., Tao, P., Fan, M., Xu, N., Shen, X., & Yan, C. (2017) · Advanced Materials · doi:10.1002/adma.201702268 · Cited by 405
Wang, Y., Wang, Z., Chen, Y., Zhang, H., Yousaf, M., Wu, H., Zou, M., Cao, A., & Han, R. P. S. (2018) · Advanced Materials · doi:10.1002/adma.201802074 · Cited by 370
Bin, D.-S., Chi, Z.-X., Li, Y., Zhang, K., Yang, X., Sun, Y.-G., Piao, J.-Y., Cao, A.-M., & Wan, L.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07027 · Cited by 347
High power rechargeable magnesium/iodine battery chemistry
Tian, H., Gao, T., Li, X., Wang, X., Luo, C. W., Fan, X., Yang, C., Suo, L., Ma, Z., Han, W., et al. (2017) · Nature Communications · doi:10.1038/ncomms14083 · Cited by 325
Engineering Hollow Carbon Architecture for High-Performance K-Ion Battery Anode
Bin, D.-S., Lin, X.-J., Sun, Y.-G., Xu, Y.-S., Zhang, K., Cao, A.-M., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b02178 · Cited by 284
Liu, Y., Fan, F., Wang, J., Liu, Y., Chen, H., Jungjohann, K. L., Xu, Y., Zhu, Y., Bigio, D., Zhu, T., et al. (2014) · Nano Letters · doi:10.1021/nl500970a · Cited by 282
Defective Hard Carbon Anode for Na-Ion Batteries
Li, Z., Chen, Y., Jian, Z., Jiang, H., Razink, J. J., Stickle, W. F., Neuefeind, J. C., & Ji, X. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00645 · Cited by 280
Zhang, W., Lei, Y., Ming, F., Jiang, Q., Costa, P. M. F. J., & Alshareef, H. N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801840 · Cited by 269
Self-citationXiong, P., Zhao, X., & Xu, Y. (2018) · ChemSusChem · doi:10.1002/cssc.201701759 · Cited by 241
Few layer nitrogen-doped graphene with highly reversible potassium storage
Ju, Z., Li, P., Ma, G., Xing, Z., Zhuang, Q., & Qian, Y. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.09.009 · Cited by 229
High rate and long cycle life porous carbon nanofiber paper anodes for potassium-ion batteries
Zhao, X., Xiong, P., Meng, J., Liang, Y., Wang, J., & Xu, Y. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta04264g · Cited by 208
Direct carbonization of rice husk to prepare porous carbon for supercapacitor applications
Zhang, W., Lin, N., Liu, D., Xu, J., Sha, J., Yin, J., Tan, X., Yang, H., Lu, H., & Lin, H. (2017) · Energy · doi:10.1016/j.energy.2017.04.065 · Cited by 199
Self-citationLiu, Y., Yang, C., Pan, Q., Li, Y., Wang, G., Ou, X., Zheng, F., Xiong, X., Liu, M., & Zhang, Q. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04694h · Cited by 182
Internal structure – Na storage mechanisms – Electrochemical performance relations in carbons
Bommier, C., Mitlin, D., & Ji, X. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.04.006 · Cited by 167
Qi, X., Huang, K., Wu, X., Zhao, W., Wang, H., Zhuang, Q., & Ju, Z. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.094 · Cited by 159
Self-citationBinder-free graphene foams for O2 electrodes of Li–O2 batteries
Zhang, W., Zhu, J., Ang, E. H., Zeng, Y., Xiao, N., Gao, Y., Liu, W., Hng, H. H., & Yan, Q. (2013) · Nanoscale · doi:10.1039/c3nr03321j · Cited by 108
Self-citation
Cited by
Defect Engineering on Electrode Materials for Rechargeable Batteries
Zhang, Y., Tao, L., Xie, C., Wang, D., Zou, Y., Chen, R., Wang, Y., Jia, C., & Wang, S. (2020) · Advanced Materials · doi:10.1002/adma.201905923 · Cited by 1,019
Potassium-ion batteries: outlook on present and future technologies
Min, X., Xiao, J., Fang, M., Wang, W. (., Zhao, Y., Liu, Y., Abdelkader, A. M., Xi, K., Kumar, R. V., & Huang, Z. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02917c · Cited by 761
Sodium-ion battery anodes: Status and future trends
Zhang, W., Zhang, F., Ming, F., & Alshareef, H. N. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100012 · Cited by 407
Self-citationRecent advances in rational design for high-performance potassium-ion batteries
Xu, Y., Du, Y., Chen, H., Chen, J., Ding, T., Sun, D., Kim, D. H., Lin, Z., & Zhou, X. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00601h · Cited by 367
Carbon Anode Materials: A Detailed Comparison between Na‐ion and K‐ion Batteries
Zhang, L., Wang, W. (., Lu, S., & Xiang, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003640 · Cited by 345
Metadata
- Authors
- Zhang, W., Ming, J., Zhao, W., Dong, X., Hedhili, M. N., Costa, P. M. F. J., & Alshareef, H. N.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-06-20
- Volume
- 29
- Issue
- 35
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2951829132
- Cited by
- 317
- References
- 45
- FWCI
- 16.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.