The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Void‐Free 3D Bioprinting for In Situ Endothelialization and Microfluidic Perfusion
Open accessAbstract
Two major challenges of 3D bioprinting are the retention of structural fidelity and efficient endothelialization for tissue vascularization. Both of these issues are addressed by introducing a versatile 3D bioprinting strategy, in which a templating bioink is deposited layer‐by‐layer alongside a matrix bioink to establish void‐free multimaterial structures. After crosslinking the matrix phase, the templating phase is sacrificed to create a well‐defined 3D network of interconnected tubular channels. This void‐free 3D printing (VF‐3DP) approach circumvents the traditional concerns of structural collapse, deformation, and oxygen inhibition, moreover, it can be readily used to print materials that are widely considered “unprintable.” By preloading endothelial cells into the templating bioink, the inner surface of the channels can be efficiently cellularized with a confluent endothelial layer. This in situ endothelialization method can be used to produce endothelium with a far greater cell seeding uniformity than can be achieved using the conventional postseeding approach. This VF‐3DP approach can also be extended beyond tissue fabrication and toward customized hydrogel‐based microfluidics and self‐supported perfusable hydrogel constructs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Loessner, D., Meinert, C., Kaemmerer, E., Martine, L. C., Yue, K., Levett, P. A., Klein, T. J., Melchels, F. P. W., Khademhosseini, A., & Hutmacher, D. W. (2016) · Nature Protocols · doi:10.1038/nprot.2016.037 · Cited by 868
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Vascularized microfluidic organ-chips for drug screening, disease models and tissue engineering
Osaki, T., Sivathanu, V., & Kamm, R. D. (2018) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2018.03.011 · Cited by 141
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Tailoring Gelation Mechanisms for Advanced Hydrogel Applications
Nele, V., Wojciechowski, J. P., Armstrong, J. P. K., & Stevens, M. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002759 · Cited by 300
Self-citationExpanding and optimizing 3D bioprinting capabilities using complementary network bioinks
Ouyang, L., Armstrong, J. P. K., Lin, Y., Wojciechowski, J. P., Lee-Reeves, C., Hachim, D., Zhou, K., Burdick, J. A., & Stevens, M. M. (2020) · Science Advances · doi:10.1126/sciadv.abc5529 · Cited by 293
Self-citationEngineering the multiscale complexity of vascular networks
O’Connor, C., Brady, E., Zheng, Y., Moore, E., & Stevens, K. R. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00447-8 · Cited by 271
Metadata
- Authors
- Ouyang, L., Armstrong, J. P. K., Chen, Q., Lin, Y., & Stevens, M. M.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-11-11
- Volume
- 30
- Issue
- 1
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2985065860
- Cited by
- 175
- References
- 7
- FWCI
- 6.22
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Void‐Free 3D Bioprinting for In Situ Endothelialization and Microfluidic Perfusion. https://app.cochat.ai/papers/10.1002/adfm.201908349
- The paper
- Ouyang, L., Armstrong, J. P. K., Chen, Q., Lin, Y., & Stevens, M. M. (2020). Void‐Free 3D Bioprinting for In Situ Endothelialization and Microfluidic Perfusion. Advanced Functional Materials. https://doi.org/10.1002/adfm.201908349
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.