The DOI matches its Crossref record; 107 of the 107 references it cites were found in a registry or an index.
Engineering of Polyanion Type Cathode Materials for Sodium‐Ion Batteries: Toward Higher Energy/Power Density
Abstract
The development of high energy/power density sodium‐ion batteries (SIBs) is still challenged by the high redox potential of Na/Na+ and large radius of Na+ ions, thus requiring extensive further improvement to, in particular, enhance the capacity and voltage of cathode materials. Among the various types of cathodes, the polyanion cathodes have emerged as the most pragmatic option due to their outstanding thermostability, unique inductive effect, and flexible structures. In this Review, a critical overview of the design principles and engineering strategies of polyanion cathodes that could have a pivotal role in developing high energy/power density SIBs are presented. Specifically, the engineering of polyanion cathode materials for higher voltage and specific capacity to increase energy density is discussed. The way in which morphology control, architectural design, and electrode processing have been developed to increase power density for SIBs is also analyzed. Finally, the remaining challenges and the future research direction of this field are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Sodium and Sodium‐Ion Batteries: 50 Years of Research
Delmas, C. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703137 · Cited by 1,361
Recent Advances and Prospects of Cathode Materials for Sodium‐Ion Batteries
Xiang, X., Zhang, K., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201501527 · Cited by 1,160
Odyssey of Multivalent Cathode Materials: Open Questions and Future Challenges
Canepa, P., Sai Gautam, G., Hannah, D. C., Malik, R., Liu, M., Gallagher, K. G., Persson, K. A., & Ceder, G. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00614 · Cited by 1,159
A multifunctional 3.5 V iron-based phosphate cathode for rechargeable batteries
Ellis, B. L., Makahnouk, W. R. M., Makimura, Y., Toghill, K., & Nazar, L. F. (2007) · Nature Materials · doi:10.1038/nmat2007 · Cited by 964
A 3.8-V earth-abundant sodium battery electrode
Barpanda, P., Oyama, G., Nishimura, S.-I., Chung, S.-C., & Yamada, A. (2014) · Nature Communications · doi:10.1038/ncomms5358 · Cited by 873
Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries
Jian, Z., Zhao, L., Pan, H., Hu, Y.-S., Li, H., Chen, W., & Chen, L. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.11.009 · Cited by 804
Self-citationSodium‐Ion Batteries: From Academic Research to Practical Commercialization
Deng, J., Luo, W., Chou, S., Liu, H., & Dou, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701428 · Cited by 770
Sodium‐Ion Battery Materials and Electrochemical Properties Reviewed
Chayambuka, K., Mulder, G., Danilov, D. L., & Notten, P. H. L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800079 · Cited by 733
Challenges and Perspectives for NASICON‐Type Electrode Materials for Advanced Sodium‐Ion Batteries
Chen, S., Wu, C., Shen, L., Zhu, C., Huang, Y., Xi, K., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700431 · Cited by 705
How we made the Li-ion rechargeable battery
Goodenough, J. B. (2018) · Nature Electronics · doi:10.1038/s41928-018-0048-6 · Cited by 602
Kim, H., Park, I., Seo, D.-H., Lee, S., Kim, S.-W., Kwon, W. J., Park, Y.-U., Kim, C. S., Jeon, S., & Kang, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3038646 · Cited by 592
NASICON‐Structured Materials for Energy Storage
Jian, Z., Hu, Y., Ji, X., & Chen, W. (2017) · Advanced Materials · doi:10.1002/adma.201601925 · Cited by 592
Polyanion‐Type Electrode Materials for Sodium‐Ion Batteries
Ni, Q., Bai, Y., Wu, F., & Wu, C. (2017) · Advanced Science · doi:10.1002/advs.201600275 · Cited by 586
Fang, Y., Xiao, L., Ai, X., Cao, Y., & Yang, H. (2015) · Advanced Materials · doi:10.1002/adma.201502018 · Cited by 549
Chen, M., Hua, W., Xiao, J., Cortie, D., Chen, W., Wang, E., Hu, Z., Gu, Q., Wang, X., Indris, S., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09170-5 · Cited by 522
Structure and Stability of Sodium Intercalated Phases in Olivine FePO4
Moreau, P., Guyomard, D., Gaubicher, J., & Boucher, F. (2010) · Chemistry of Materials · doi:10.1021/cm101377h · Cited by 517
Zhu, C., Song, K., van Aken, P. A., Maier, J., & Yu, Y. (2014) · Nano Letters · doi:10.1021/nl500548a · Cited by 504
Guo, J., Wang, P., Wu, X., Zhang, X., Yan, Q., Chen, H., Zhang, J., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201701968 · Cited by 458
Reversible NaFePO4 electrode for sodium secondary batteries
Oh, S.-M., Myung, S., Hassoun, J., Scrosati, B., & Sun, Y. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.06.014 · Cited by 425
Crystal phase-controlled synthesis, properties and applications of noble metal nanomaterials
Fan, Z., & Zhang, H. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00467e · Cited by 406
Kim, H., Park, I., Lee, S., Kim, H., Park, K.-Y., Park, Y.-U., Kim, H., Kim, J., Lim, H.-D., Yoon, W.-S., et al. (2013) · Chemistry of Materials · doi:10.1021/cm4013816 · Cited by 406
Kim, J., Seo, D.-H., Kim, H., Park, I., Yoo, J.-K., Jung, S.-K., Park, Y.-U., Goddard III, W. A., & Kang, K. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03215b · Cited by 398
Phosphate Framework Electrode Materials for Sodium Ion Batteries
Fang, Y., Zhang, J., Xiao, L., Ai, X., Cao, Y., & Yang, H. (2017) · Advanced Science · doi:10.1002/advs.201600392 · Cited by 381
A Sodium-Ion Cell Based on the Fluorophosphate Compound NaVPO[sub 4]F
Barker, J., Saidi, M. Y., & Swoyer, J. L. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1523691 · Cited by 370
Jiang, Y., Yang, Z., Li, W., Zeng, L., Pan, F., Wang, M., Wei, X., Hu, G., Gu, L., & Yu, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402104 · Cited by 362
Park, Y., Seo, D., Kim, H., Kim, J., Lee, S., Kim, B., & Kang, K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400561 · Cited by 351
Ellis, B. L., Makahnouk, W. R. M., Rowan-Weetaluktuk, W. N., Ryan, D. H., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902023h · Cited by 341
Chen, M., Liu, Q., Wang, S., Wang, E., Guo, X., & Chou, S. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803609 · Cited by 341
Xu, Y., Wei, Q., Xu, C., Li, Q., An, Q., Zhang, P., Sheng, J., Zhou, L., & Mai, L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600389 · Cited by 335
Na3MnZr(PO4)3: A High-Voltage Cathode for Sodium Batteries
Gao, H., Seymour, I. D., Xin, S., Xue, L., Henkelman, G., & Goodenough, J. B. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b11388 · Cited by 312
An Aqueous Symmetric Sodium‐Ion Battery with NASICON‐Structured Na3MnTi(PO4)3
Gao, H., & Goodenough, J. B. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201606508 · Cited by 307
Nanocomposite Materials for the Sodium–Ion Battery: A Review
Liang, Y., Lai, W., Miao, Z., & Chou, S. (2018) · Small · doi:10.1002/smll.201702514 · Cited by 299
Electrospun Na3V2(PO4)3/C nanofibers as stable cathode materials for sodium-ion batteries
Liu, J., Tang, K., Song, K., van Aken, P. A., Yu, Y., & Maier, J. (2014) · Nanoscale · doi:10.1039/c3nr05329f · Cited by 296
Bianchini, M., Fauth, F., Brisset, N., Weill, F., Suard, E., Masquelier, C., & Croguennec, L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00361 · Cited by 291
First exploration of Na-ion migration pathways in the NASICON structure Na3V2(PO4)3
Song, W., Ji, X., Wu, Z., Zhu, Y., Yang, Y., Chen, J., Jing, M., Li, F., & Banks, C. E. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00230j · Cited by 285
Binder‐Free Electrodes for Advanced Sodium‐Ion Batteries
Jin, T., Han, Q., & Jiao, L. (2020) · Advanced Materials · doi:10.1002/adma.201806304 · Cited by 279
Ren, W., Zheng, Z., Xu, C., Niu, C., Wei, Q., An, Q., Zhao, K., Yan, M., Qin, M., & Mai, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.03.018 · Cited by 275
Wang, D., Bie, X., Fu, Q., Dixon, D., Bramnik, N., Hu, Y.-S., Fauth, F., Wei, Y., Ehrenberg, H., Chen, G., et al. (2017) · Nature Communications · doi:10.1038/ncomms15888 · Cited by 275
Cai, Y., Cao, X., Luo, Z., Fang, G., Liu, F., Zhou, J., Pan, A., & Liang, S. (2018) · Advanced Science · doi:10.1002/advs.201800680 · Cited by 251
Jin, T., Liu, Y., Li, Y., Cao, K., Wang, X., & Jiao, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700087 · Cited by 250
Anomalous Jahn–Teller behavior in a manganese-based mixed-phosphate cathode for sodium ion batteries
Kim, H., Yoon, G., Park, I., Park, K.-Y., Lee, B., Kim, J., Park, Y.-U., Jung, S.-K., Lim, H.-D., Ahn, D., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01876e · Cited by 246
Jiang, Y., Zhou, X., Li, D., Cheng, X., Liu, F., & Yu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800068 · Cited by 243
Na3V2(PO4)2F3 Revisited: A High-Resolution Diffraction Study
Bianchini, M., Brisset, N., Fauth, F., Weill, F., Elkaim, E., Suard, E., Masquelier, C., & Croguennec, L. (2014) · Chemistry of Materials · doi:10.1021/cm501644g · Cited by 240
High Power–High Energy Sodium Battery Based on Threefold Interpenetrating Network
Zhu, C., Kopold, P., van Aken, P. A., Maier, J., & Yu, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505943 · Cited by 231
Cao, X., Pan, A., Yin, B., Fang, G., Wang, Y., Kong, X., Zhu, T., Zhou, J., Cao, G., & Liang, S. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.03.066 · Cited by 226
Synthesis and catalysis of chemically reduced metal–metalloid amorphous alloys
Pei, Y., Zhou, G., Luan, N., Zong, B., Qiao, M., & Tao, F. (. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35182j · Cited by 225
Improving the energy density of Na3V2(PO4)3-based positive electrodes through V/Al substitution
Lalère, F., Seznec, V., Courty, M., David, R., Chotard, J. N., & Masquelier, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03528g · Cited by 215
Additional Sodium Insertion into Polyanionic Cathodes for Higher‐Energy Na‐Ion Batteries
Bianchini, M., Xiao, P., Wang, Y., & Ceder, G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700514 · Cited by 211
Park, C. S., Kim, H., Shakoor, R. A., Yang, E., Lim, S. Y., Kahraman, R., Jung, Y., & Choi, J. W. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312044k · Cited by 194
Scalable Room-Temperature Synthesis of Multi-shelled Na3(VOPO4)2F Microsphere Cathodes
Qi, Y., Tong, Z., Zhao, J., Ma, L., Wu, T., Liu, H., Yang, C., Lu, J., & Hu, Y.-S. (2018) · Joule · doi:10.1016/j.joule.2018.07.027 · Cited by 193
An, Q., Xiong, F., Wei, Q., Sheng, J., He, L., Ma, D., Yao, Y., & Mai, L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401963 · Cited by 192
High valence Mo-doped Na3V2(PO4)3/C as a high rate and stable cycle-life cathode for sodium battery
Li, X., Huang, Y., Wang, J., Miao, L., Li, Y., Liu, Y., Qiu, Y., Fang, C., Han, J., & Huang, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08970h · Cited by 188
Zhang, J., Fang, Y., Xiao, L., Qian, J., Cao, Y., Ai, X., & Yang, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16000 · Cited by 187
Nitrogen doped porous carbon as excellent dual anodes for Li- and Na-ion batteries
Yan, Z., Yang, Q., Wang, Q., & Ma, J. (2019) · Chinese Chemical Letters · doi:10.1016/j.cclet.2019.11.002 · Cited by 186
Self-citation2020 roadmap on two-dimensional materials for energy storage and conversion
Xu, B., Qi, S., Jin, M., Cai, X., Lai, L., Sun, Z., Han, X., Lin, Z., Shao, H., Peng, P., et al. (2019) · Chinese Chemical Letters · doi:10.1016/j.cclet.2019.10.028 · Cited by 180
Self-citationLiu, Q., Meng, X., Wei, Z., Wang, D., Gao, Y., Wei, Y., Du, F., & Chen, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11372 · Cited by 177
Aragón, M. J., Lavela, P., Ortiz, G. F., & Tirado, J. L. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151502jes · Cited by 170
An Overview of Mixed Polyanionic Cathode Materials for Sodium‐Ion Batteries
Senthilkumar, B., Murugesan, C., Sharma, L., Lochab, S., & Barpanda, P. (2019) · Small Methods · doi:10.1002/smtd.201800253 · Cited by 168
A new low-voltage plateau of Na3V2(PO4)3as an anode for Na-ion batteries
Jian, Z., Sun, Y., & Ji, X. (2015) · Chemical Communications · doi:10.1039/c5cc00944h · Cited by 161
Na3V2O2(PO4)2F/graphene sandwich structure for high-performance cathode of a sodium-ion battery
Xu, M., Wang, L., Zhao, X., Song, J., Xie, H., Lu, Y., & Goodenough, J. B. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52408f · Cited by 154
Self-citationChen, M., Hua, W., Xiao, J., Cortie, D. L., Guo, X., Wang, E., Gu, Q., Hu, Z., Indris, S., Wang, X. L., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201912964 · Cited by 153
Li, H., Bai, Y., Wu, F., Li, Y., & Wu, C. K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.153 · Cited by 147
Self-citationKlee, R., Lavela, P., Aragón, M. J., Alcántara, R., & Tirado, J. L. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.066 · Cited by 146
Ni, Q., Bai, Y., Li, Y., Ling, L., Li, L., Chen, G., Wang, Z., Ren, H., Wu, F., & Wu, C. K. (2018) · Small · doi:10.1002/smll.201702864 · Cited by 144
The preparation of NaV1−xCrxPO4F cathode materials for sodium-ion battery
Zhuo, H., Wang, X., Tang, A., Liu, Z., Gamboa, S. A., & Sebastian, P. J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.079 · Cited by 142
A novel sol–gel synthesis route to NaVPO4F as cathode material for hybrid lithium ion batteries
Zhao, J., He, J., Ding, X., Zhou, J.-H., Ma, Y., Wu, S., & Huang, R. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.04.003 · Cited by 141
Effect of aluminum doping on carbon loaded Na3V2(PO4)3 as cathode material for sodium-ion batteries
Aragón, M. J., Lavela, P., Alcántara, R., & Tirado, J. L. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.09.044 · Cited by 138
Li, H., Bai, Y., Wu, F., Ni, Q., & Wu, C. K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09898 · Cited by 137
Self-citationXiong, F., An, Q., Xia, L., Zhao, Y., Mai, L., Tao, H., & Yue, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.12.087 · Cited by 136
Chen, H., Zhang, B., Wang, X., Dong, P., Tong, H., Zheng, J., Yu, W., & Zhang, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16402 · Cited by 121
Song, W., Ji, X., Wu, Z., Zhu, Y., Yao, Y., Huangfu, K., Chen, Q., & Banks, C. E. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14472k · Cited by 120
Structure and Dynamics of Fluorophosphate Na-Ion Battery Cathodes
Dacek, S. T., Richards, W. D., Kitchaev, D. A., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01989 · Cited by 109
NaVPO4F with high cycling stability as a promising cathode for sodium-ion battery
Law, M., & Balaya, P. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.08.007 · Cited by 109
Yang, J., Han, D., Jo, M. R., Song, K., Kim, Y., Chou, S., Liu, H., & Kang, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta06001f · Cited by 107
Matts, I. L., Dacek, S. T., Pietrzak, T. K., Malik, R., & Ceder, G. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02299 · Cited by 96
Controllable synthesis of high-rate and long cycle-life Na3V2(PO4)3 for sodium-ion batteries
Li, H., Wu, C. K., Bai, Y., Wu, F., & Wang, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.096 · Cited by 94
Self-citationYu, T., Lin, B., Li, Q., Wang, X., Qu, W.-L., Zhang, S., & Deng, C. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp04958c · Cited by 94
Peng, M., Zhang, D., Zheng, L., Wang, X., Lin, Y., Xia, D., Sun, Y., & Guo, G. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.11.023 · Cited by 92
Ma, X., Xia, J., Wu, X., Pan, Z., & Shen, P. K. (2019) · Carbon · doi:10.1016/j.carbon.2019.02.004 · Cited by 92
NaFe 2 PO 4 (SO 4 ) 2 : a potential cathode for a Na-ion battery
Shiva, K., Singh, P., Zhou, W., & Goodenough, J. B. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01093h · Cited by 91
Kretschmer, K., Sun, B., Zhang, J., Xie, X., Liu, H., & Wang, G. (2016) · Small · doi:10.1002/smll.201603318 · Cited by 86
Phase separation and frustrated square lattice magnetism of Na 1.5 VOPO 4 F 0.5
Tsirlin, A. A., Nath, R., Abakumov, A. M., Furukawa, Y., Johnston, D. C., Hemmida, M., von Nidda, H. ‐. K., Loidl, A., Geibel, C., & Rosner, H. (2011) · Physical Review B · doi:10.1103/physrevb.84.014429 · Cited by 85
Zhang, S., Deng, C., & Meng, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04499a · Cited by 84
Song, H. J., Kim, D.-S., Kim, J., Hong, S., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00727b · Cited by 84
Li, Q., Lin, B., Zhang, S., & Deng, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01465h · Cited by 83
Role of the Mn substituent in Na 3 V 2 (PO 4 ) 3 for high-rate sodium storage
Park, J.-S., Kim, J., Jo, J. H., & Myung, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta06162a · Cited by 82
Kajiyama, S., Kikkawa, J., Hoshino, J., Okubo, M., & Hosono, E. (2014) · Chemistry - A European Journal · doi:10.1002/chem.201403126 · Cited by 78
Improvement in the Energy Density of Na3V2(PO4)3 by Mg Substitution
Inoishi, A., Yoshioka, Y., Zhao, L., Kitajou, A., & Okada, S. (2017) · ChemElectroChem · doi:10.1002/celc.201700540 · Cited by 78
Li, W., Yao, Z., Zhou, C., Wang, X., Xia, X., Gu, C., & Tu, J. P. (2019) · Small · doi:10.1002/smll.201902432 · Cited by 70
Lin, B., Li, Q., Liu, B., Zhang, S., & Deng, C. (2016) · Nanoscale · doi:10.1039/c6nr00680a · Cited by 66
Zhong, X., Yang, Z., Jiang, Y., Li, W., Gu, L., & Yu, Y. M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11873 · Cited by 66
Sheng, J., Zang, H., Tang, C., An, Q., Wei, Q., Zhang, G., Chen, L., Chen, P., & Mai, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.021 · Cited by 65
Shakoor, R. A., Park, C. S., Raja, A. A., Shin, J., & Kahraman, R. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp06836c · Cited by 63
Niu, Y., Xu, M., Dai, C., Shen, B., & Li, C. M. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp02483e · Cited by 53
Self-citationBarpanda, P., Liu, G., Mohamed, Z., Ling, C. D., & Yamada, A. (2014) · Solid State Ionics · doi:10.1016/j.ssi.2014.03.011 · Cited by 46
Jiang, Y., Yao, Y., Shi, J., Zeng, L., Gu, L., & Yu, Y. M. (2016) · ChemNanoMat · doi:10.1002/cnma.201600111 · Cited by 43
Reynaud, M., Wizner, A., Katcho, N. A., Loaiza, L. C., Galcerán, M., Carrasco, J., Rojo, T., Armand, M. B., & Casas‐Cabanas, M. (2017) · Electrochemistry Communications · doi:10.1016/j.elecom.2017.09.011 · Cited by 43
Ren, X., Turcheniuk, K., Lewis, D., Fu, W., Magasinski, A., Schauer, M. W., & Yushin, G. N. (2018) · Small · doi:10.1002/smll.201703425 · Cited by 42
Micro-nano structure Na2MnPO4F/C as cathode material with excellent sodium storage properties
Zhong, Y., Wu, Z., Tang, Y., Xiang, W., Guo, X., & Zhong, B. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.01.110 · Cited by 39
Stable cycling of NaFePO4 cathodes in high salt concentration ionic liquid electrolytes
Hilder, M., Howlett, P. C., Saurel, D., Anne, H., Casas‐Cabanas, M., Armand, M. B., Rojo, T., MacFarlane, D. R., & Forsyth, M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.09.102 · Cited by 36
Zarrabeitia, M., Jáuregui, M., Sharma, N., Pramudita, J. C., & Casas‐Cabanas, M. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01054 · Cited by 34
Zhang, G., Xiong, T., Yan, M., Xu, Y., Ren, W., Xu, X., Wei, Q., & Mai, L. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00957 · Cited by 26
Smiley, D. L., Carlier, D., & Goward, G. R. (2019) · Solid State Nuclear Magnetic Resonance · doi:10.1016/j.ssnmr.2019.07.001 · Cited by 22
Kim, H., Park, C. S., Choi, J. W., & Jung, Y. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03185 · Cited by 21
Na3FePO4CO3 as a cathode for hybrid-ion batteries—study of Na+/Li+ electrochemical exchange
Kosova, N. V., & Shindrov, A. A. (2019) · Ionics · doi:10.1007/s11581-019-03128-9 · Cited by 19
Cited by
Ether‐Based Electrolyte Chemistry Towards High‐Voltage and Long‐Life Na‐Ion Full Batteries
Liang, H., Gu, Z., Zhao, X., Guo, J., Yang, J., Li, W., Li, B., Liu, Z., Li, W., & Wu, X. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202112550 · Cited by 301
Liu, Y., Li, J., Shen, Q., Zhang, J., He, P., Qu, X., & Liu, Y. (2022) · eScience · doi:10.1016/j.esci.2021.12.008 · Cited by 294
2021 roadmap for sodium-ion batteries
Tapia-Ruiz, N., Armstrong, A. R., Alptekin, H., Amores, M. A., Au, H., Barker, J., Boston, R., Brant, W. R., Brittain, J. M., Chen, Y., et al. (2021) · Journal of Physics: Energy · doi:10.1088/2515-7655/ac01ef · Cited by 273
He, J., Tao, T., Yang, F., & Sun, Z. (2022) · ChemSusChem · doi:10.1002/cssc.202102522 · Cited by 29
Metadata
- Authors
- Li, H., Xu, M., Zhang, Z., Lai, Y., & Ma, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-04-29
- Volume
- 30
- Issue
- 28
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3023514798
- Cited by
- 260
- References
- 107
- FWCI
- 11.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.