CoChat

3D Printing Silicone Elastomer for Patient‐Specific Wearable Pulse Oximeter

Abdollahi, Sara, Markvicka, Eric J., Majidi, Carmel, Feinberg, Adam W. · 2020 · Advanced Healthcare Materials
Cited by 82

The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.

Abstract

Commercial pulse oximeters are used clinically to measure heart rate and blood oxygen saturation and traditionally made from rigid materials. However, these devices are unsuitable for continuous monitoring due to poor fit and mechanical mismatch. Soft materials that match the elastic properties of biological tissue provide improved comfort and signal‐to‐noise but typically require molding to manufacture, limiting the speed and ease of customizing for patient‐specific anatomy. Here, freeform reversible embedding (FRE) 3D printing is used to create polydimethylsiloxane (PDMS) elastomer cuffs for use on the hand and foot. FRE enables printing liquid PDMS prepolymer in 3D geometries within a sacrificial hydrogel bath that provides support during cure. This serves as proof‐of‐concept for fabricating patient‐specific pulse oximeters with pressure sensing, termed P 3‐wearable. A sizing analysis establishes dimensional accuracy of FRE‐printed PDMS compared to anatomical computer‐aided design models. The P 3‐wearable successfully outputs photoplethysmography (PPG) and pressure amplitude signals wirelessly to a tablet in real time and the PPG is used to calculate heart rate, blood oxygen content, and activity state. The results establish that FRE printing of PDMS can be used to fabricate patient‐specific wearable devices and measure heart rate and blood oxygenation on par with commercial devices.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/adhm.201901735

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 10 references

Cited by

See all 82

Metadata

Authors
Abdollahi, S., Markvicka, E. J., Majidi, C., & Feinberg, A. W.
Venue
Advanced Healthcare Materials
Publisher
Wiley
Published
2020-06-16
Volume
9
Issue
15
Pages
e1901735-e1901735
ISSN
  • 2192-2640 (ISSN-L)
  • 2192-2659
OpenAlex
W3034794841
Cited by
82
References
10
FWCI
3.47
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: 3D Printing Silicone Elastomer for Patient‐Specific Wearable Pulse Oximeter. https://app.cochat.ai/papers/10.1002/adhm.201901735
The paper
Abdollahi, S., Markvicka, E. J., Majidi, C., & Feinberg, A. W. (2020). 3D Printing Silicone Elastomer for Patient‐Specific Wearable Pulse Oximeter. Advanced Healthcare Materials. https://doi.org/10.1002/adhm.201901735

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.