The DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Hybrid Organic–Inorganic Light‐Emitting Diodes
Abstract
The demonstration of colour tunability and high efficiency has brought organic light‐emitting diodes (OLEDs) into the displays and lighting market. However, high production costs due to expensive deposition techniques and the use of reactive materials still limit their market entry, highlighting the need for novel concepts. This has driven the research towards the integration of both organic and inorganic materials into devices that benefit from their respective peculiar properties. The most representative example of this tendency is the application of metal oxides in organic optoelectronics. Metal oxides combine properties such as high transparency, good electrical conductivities, tuneable morphology, and the possibility of deposition on large areas with low‐cost techniques. The use of metal oxides as charge injection interfaces in OLEDs has also been investigated. Hybrid organic–inorganic light‐emitting diodes (HyLEDs) are inverted OLEDs that employ air‐stable metal oxides as the charge injection contacts. They are emerging as a potential competitor to standard OLEDs, thanks to their intrinsic air stable electrodes and solution processability, which could result in low‐cost, large area, light‐emitting devices. This article reviews the short history of this class of devices from its first solid state example published in 2006 to the present achievements. The data presented shed light on the electronic mechanism behind the functioning of HyLEDs and give guidelines for their further optimization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organic electroluminescent diodes
Tang, C. W., & VanSlyke, S. A. (1987) · Applied Physics Letters · doi:10.1063/1.98799 · Cited by 14,363
Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results
Linsebigler, A. L., Lu, G., & Yates, J. T. (1995) · Chemical Reviews · doi:10.1021/cr00035a013 · Cited by 11,575
A comprehensive review of ZnO materials and devices
Özgür, Ü., Alivov, Y. I., Liu, C., Teke, A., Reshchikov, M. A., Doğan, S., Avrutin, V., Cho, S.-J., & Morkoç, H. (2005) · Journal of Applied Physics · doi:10.1063/1.1992666 · Cited by 11,463
Light-emitting diodes based on conjugated polymers
Burroughes, J. H., Bradley, D. D. C., Brown, A. R., Marks, R. N., Mackay, K., Friend, R. H., Burns, P. L., & Holmes, A. B. (1990) · Nature · doi:10.1038/347539a0 · Cited by 11,393
Titanium Dioxide Nanomaterials: Synthesis, Properties, Modifications, and Applications
Chen, X., & Mao, S. S. (2007) · Chemical Reviews · doi:10.1021/cr0500535 · Cited by 10,688
(1990) · Cited by 9,358
Formation and Structure of Self-Assembled Monolayers
Ulman, A. (1996) · Chemical Reviews · doi:10.1021/cr9502357 · Cited by 7,906
Highly efficient phosphorescent emission from organic electroluminescent devices
Baldo, M. A., O'Brien, D. F., You, Y., Shoustikov, A., Sibley, S., Thompson, M. E., & Forrest, S. R. (1998) · Nature · doi:10.1038/25954 · Cited by 7,204
Light-Induced Redox Reactions in Nanocrystalline Systems
Hagfeldt, A., & Graetzel, M. (1995) · Chemical Reviews · doi:10.1021/cr00033a003 · Cited by 5,357
An overview of semiconductor photocatalysis
Mills, A., & Le Hunte, S. (1997) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/s1010-6030(97)00118-4 · Cited by 3,705
Polyoxometalate Chemistry: An Old Field with New Dimensions in Several Disciplines
Pope, M. T., & Müller, A. (1991) · Angewandte Chemie International Edition in English · doi:10.1002/anie.199100341 · Cited by 3,645
White organic light-emitting diodes with fluorescent tube efficiency
Reineke, S., Lindner, F., Schwartz, G., Seidler, N., Walzer, K., Lüssem, B., & Leo, K. (2009) · Nature · doi:10.1038/nature08003 · Cited by 3,462
Nearly 100% internal phosphorescence efficiency in an organic light-emitting device
Adachi, C., Baldo, M. A., Thompson, M. E., & Forrest, S. R. (2001) · Journal of Applied Physics · doi:10.1063/1.1409582 · Cited by 3,458
Transparent conductors—A status review
Chopra, K. L., Major, S. S., & Pandya, D. K. (1983) · Thin Solid Films · doi:10.1016/0040-6090(83)90256-0 · Cited by 2,700
Structure and growth of self-assembling monolayers
Schreiber, F. (2000) · Progress in Surface Science · doi:10.1016/s0079-6816(00)00024-1 · Cited by 2,484
Management of singlet and triplet excitons for efficient white organic light-emitting devices
Sun, Y., Giebink, N. C., Kanno, H., Ma, B., Thompson, M. E., & Forrest, S. R. (2006) · Nature · doi:10.1038/nature04645 · Cited by 2,327
Sol-gel chemistry of transition metal oxides
Livage, J., Henry, M., & Sanchez, C. (1988) · Progress in Solid State Chemistry · doi:10.1016/0079-6786(88)90005-2 · Cited by 2,323
Long, D.-L., Burkholder, E., & Cronin, L. (2007) · Chem. Soc. Rev. · doi:10.1039/b502666k · Cited by 2,174
Optical Properties of ZnO Nanostructures
Djurišić, A. B., & Leung, Y. H. (2006) · Small · doi:10.1002/smll.200600134 · Cited by 1,938
Self-Assembly of ZnO: From Nanodots to Nanorods
Pacholski, C., Kornowski, A., & Weller, H. (2002) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20020402)41:7<1188::aid-anie1188>3.0.co;2-5 · Cited by 1,888
Multilayer White Light-Emitting Organic Electroluminescent Device
Kido, J., Kimura, M., & Nagai, K. (1995) · Science · doi:10.1126/science.267.5202.1332 · Cited by 1,877
Intrinsic n-type versus p-type doping asymmetry and the defect physics of ZnO
Zhang, S. B., Wei, S.-H., & Zunger, A. (2001) · Physical Review B · doi:10.1103/physrevb.63.075205 · Cited by 1,819
Electrical and optical properties of TiO2 anatase thin films
Tang, H., Prasad, K., Sanjinès, R., Schmid, P. E., & Lévy, F. (1994) · Journal of Applied Physics · doi:10.1063/1.356306 · Cited by 1,793
High dielectric constant gate oxides for metal oxide Si transistors
Robertson, J. (2006) · Reports on Progress in Physics · doi:10.1088/0034-4885/69/2/r02 · Cited by 1,726
Highly Efficient Organic Devices Based on Electrically Doped Transport Layers
Walzer, K., Maennig, B., Pfeiffer, M., & Leo, K. (2007) · Chemical Reviews · doi:10.1021/cr050156n · Cited by 1,560
Chen, L., Hong, Z., Li, G., & Yang, Y. (2009) · Advanced Materials · doi:10.1002/adma.200802854 · Cited by 1,267
An Introduction to Ultrathin Organic Films
(1991) · Elsevier eBooks · doi:10.1016/c2009-0-22306-3 · Cited by 1,158
Transition metal oxides as the buffer layer for polymer photovoltaic cells
Shrotriya, V., Li, G., Yao, Y., Chu, C.-W., & Yang, Y. (2006) · Applied Physics Letters · doi:10.1063/1.2174093 · Cited by 1,035
Efficient Hybrid Solar Cells from Zinc Oxide Nanoparticles and a Conjugated Polymer
Beek, W. J. E., Wienk, M. M., & Janssen, R. A. J. (2004) · Advanced Materials · doi:10.1002/adma.200306659 · Cited by 932
Handbook of Transparent Conductors
(2011) · Springer eBooks · doi:10.1007/978-1-4419-1638-9 · Cited by 879
Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer
White, M. S., Olson, D. C., Shaheen, S. E., Kopidakis, N., & Ginley, D. S. (2006) · Applied Physics Letters · doi:10.1063/1.2359579 · Cited by 813
Efficient inverted polymer solar cells
Li, G., Chu, C.-W., Shrotriya, V., Huang, J., & Yang, Y. (2006) · Applied Physics Letters · doi:10.1063/1.2212270 · Cited by 788
Low-voltage organic transistors with an amorphous molecular gate dielectric
Halik, M., Klauk, H., Zschieschang, U., Schmid, G., Dehm, C., Schütz, M., Maisch, S., Effenberger, F., Brunnbauer, M., & Stellacci, F. (2004) · Nature · doi:10.1038/nature02987 · Cited by 787
Tuning of Metal Work Functions with Self‐Assembled Monolayers
de Boer, B., Hadipour, A., Mandoc, M. M., van Woudenbergh, T., & Blom, P. W. M. (2005) · Advanced Materials · doi:10.1002/adma.200401216 · Cited by 747
Versatility of chemical spray pyrolysis technique
Patil, P. S. (1999) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(99)00049-8 · Cited by 731
Kröger, M., Hamwi, S., Meyer, J., Riedl, T., Kowalsky, W., & Kahn, A. (2009) · Applied Physics Letters · doi:10.1063/1.3231928 · Cited by 703
Thin Film Deposition Using Spray Pyrolysis
Perednis, D., & Gauckler, L. J. (2005) · Journal of Electroceramics · doi:10.1007/s10832-005-0870-x · Cited by 653
Greenham, N. C., Friend, R. H., & Bradley, D. D. C. (1994) · Advanced Materials · doi:10.1002/adma.19940060612 · Cited by 575
Comparison of the photoredox properties of polyoxometallates and semiconducting particles
Hiskia, A., Mylonas, A., & Papaconstantinou, E. (2001) · Chemical Society Reviews · doi:10.1039/a905675k · Cited by 499
Highly efficient semiconducting TiO2 photoelectrodes prepared by aerosol pyrolysis
Kavan, L., & Grätzel, M. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)90400-w · Cited by 445
Stability of Polar Oxide Surfaces
Wander, A., Schedin, F., Steadman, P., Norris, A., McGrath, R., Turner, T. S., Thornton, G., & Harrison, N. M. (2001) · Physical Review Letters · doi:10.1103/physrevlett.86.3811 · Cited by 430
Wu, H., Huang, F., Mo, Y., Yang, W., Wang, D., Peng, J., & Cao, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400067 · Cited by 413
New Iridium Complexes as Highly Efficient Orange–Red Emitters in Organic Light‐Emitting Diodes
Duan, J. P., Sun, P. P., & Cheng, C. H. (2003) · Advanced Materials · doi:10.1002/adma.200390051 · Cited by 387
Arias, A. C., MacKenzie, J. D., Stevenson, R., Halls, J. J. M., Inbasekaran, M., Woo, E. P., Richards, D., & Friend, R. H. (2001) · Macromolecules · doi:10.1021/ma010240e · Cited by 383
Discovery-based design of transparent conducting oxide films
Exarhos, G. J., & Zhou, X.-D. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2007.03.014 · Cited by 363
Huang, J., Xu, Z., & Yang, Y. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200700051 · Cited by 352
How To Make Ohmic Contacts to Organic Semiconductors
Shen, Y., Hosseini, A. R., Wong, M. H., & Malliaras, G. G. (2004) · ChemPhysChem · doi:10.1002/cphc.200300942 · Cited by 303
X-ray photoelectron spectroscopy of alkylaminesilanes bound to metal oxide electrodes
Moses, P. R., Wier, L. M., Lennox, J. C., Finklea, H. O., Lenhard, J. R., & Murray, R. W. (1978) · Analytical Chemistry · doi:10.1021/ac50026a010 · Cited by 257
Efficient Single‐Layer Polymer Light‐Emitting Diodes
Kabra, D., Lu, L. P., Song, M. H., Snaith, H. J., & Friend, R. H. (2010) · Advanced Materials · doi:10.1002/adma.201000317 · Cited by 254
Soluble PPVs with Enhanced Performance—A Mechanistic Approach
Becker, H., Spreitzer, H., Kreuder, W., Kluge, E., Schenk, H. W., Parker, I. D., & Cao, Y. (2000) · Advanced Materials · Cited by 248
Highly Efficient Single‐Layer Polymer Electrophosphorescent Devices
Yang, X., Neher, D., Hertel, D., & Däubler, T. K. (2004) · Advanced Materials · doi:10.1002/adma.200305621 · Cited by 219
Zinc Oxide Nanostructures: Morphology Derivation and Evolution
Ye, C., Fang, X., Hao, Y., Teng, X., & Zhang, L. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp0509358 · Cited by 218
Solution Processing of Inorganic Materials
(2008) · Wiley eBooks · doi:10.1002/9780470407790 · Cited by 211
Campbell, A. J., Bradley, D. D. C., & Antoniadis, H. (2001) · Applied Physics Letters · doi:10.1063/1.1406143 · Cited by 210
Electronic structures of interfacial states formed at polymeric semiconductor heterojunctions
Huang, Y., Westenhoff, S., Avilov, I. V., Sreearunothai, P., Hodgkiss, J. M., Deleener, C., Friend, R. H., & Beljonne, D. (2008) · Nature Materials · doi:10.1038/nmat2182 · Cited by 198
Meyer, J., Shu, A., Kröger, M., & Kahn, A. (2010) · Applied Physics Letters · doi:10.1063/1.3374333 · Cited by 196
Doping of the Metal Oxide Nanostructure and its Influence in Organic Electronics
Park, M., Li, J., Kumar, A., Li, G., & Yang, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801639 · Cited by 182
Efficient Polymer Light‐Emitting Diode Using Air‐Stable Metal Oxides as Electrodes
Bolink, H. J., Coronado, E., Orozco, J., & Sessolo, M. (2009) · Advanced Materials · doi:10.1002/adma.200802155 · Cited by 177
Self-citationCornil, J., Gueli, I., Dkhissi, A., Sancho-Garcia, J. C., Hennebicq, E., Calbert, J. P., Lemaur, V., Beljonne, D., & Brédas, J. L. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1561054 · Cited by 163
Preparation and Characterization of TiO2 Thin Films by Sol-Gel Method
Alam, M. J., & Cameron, D. (2002) · Journal of Sol-Gel Science and Technology · doi:10.1023/a:1019912312654 · Cited by 157
Air stable hybrid organic-inorganic light emitting diodes using ZnO as the cathode
Bolink, H. J., Coronado, E., Repetto, D., & Sessolo, M. (2007) · Applied Physics Letters · doi:10.1063/1.2809387 · Cited by 152
Self-citationActon, O., Ting, G., Ma, H., Ka, J.-W., Yip, H., Tucker, N. M., & Jen, A. K. ‐. (2008) · Advanced Materials · doi:10.1002/adma.200800810 · Cited by 148
Electron injection into organic semiconductor devices from high work function cathodes
Hoven, C. V., Yang, R., García, A. A., Crockett, V., Heeger, A. J., Bazan, G. C., & Nguyen, T. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0806494105 · Cited by 142
Brown, A. R., Pichler, K., Greenham, N. C., Bradley, D. D. C., Friend, R. H., & Holmes, A. B. (1993) · Chemical Physics Letters · doi:10.1016/0009-2614(93)89100-v · Cited by 139
Huang, F., Niu, Y. ‐., Zhang, Y. A., Ka, J., Liu, M. S., & Jen, A. K. ‐. (2007) · Advanced Materials · doi:10.1002/adma.200602967 · Cited by 137
Ramanathan, S. (2009) · Springer eBooks · doi:10.1007/978-1-4419-0664-9 · Cited by 131
Haque, S. A., Koops, S. E., Tokmoldin, N., Durrant, J. R., Huang, J., Bradley, D. D. C., & Palomares, E. J. (2007) · Advanced Materials · doi:10.1002/adma.200601619 · Cited by 124
Huang, F., Zhang, Y. A., Liu, M. S., & Jen, A. K. ‐. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801898 · Cited by 101
Bano, N., Zaman, S., Zainelabdin, A., Hussain, S., Hussain, I., Nur, O., & Willander, M. (2010) · Journal of Applied Physics · doi:10.1063/1.3475473 · Cited by 94
Wadeasa, A., Beegum, S. L., Sellappan, R., Nur, O., & Willander, M. (2009) · Applied Physics A · doi:10.1007/s00339-009-5075-8 · Cited by 28
Cited by
Transition Metal Oxides for Organic Electronics: Energetics, Device Physics and Applications
Meyer, J., Hamwi, S., Kröger, M., Kowalsky, W., Riedl, T., & Kahn, A. (2012) · Advanced Materials · doi:10.1002/adma.201201630 · Cited by 1,248
Universal energy-level alignment of molecules on metal oxides
Greiner, M. T., Helander, M. G., Tang, W.-M., Wang, Z.-B., Qiu, J., & Lu, Z.-H. (2012) · Nature Materials · doi:10.1038/nmat3159 · Cited by 978
Luminescent Ionic Transition‐Metal Complexes for Light‐Emitting Electrochemical Cells
Costa, R. D., Ortí, E., Bolink, H. J., Monti, F., Accorsi, G., & Armaroli, N. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201471 · Cited by 971
Self-citationZnO-Based Dye-Sensitized Solar Cells
Anta, J. A., Guillén, E., & Tena-Zaera, R. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3010025 · Cited by 584
Vasilopoulou, M., Douvas, A. M., Georgiadou, D. G., Palilis, L. C., Kennou, S., Sygellou, L., Soultati, A., Kostis, I., Papadimitropoulos, G., Davazoglou, D., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3026906 · Cited by 418
Metadata
- Authors
- Sessolo, M., & Bolink, H. J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2011-02-22
- Volume
- 23
- Issue
- 16
- Pages
- 1829-1845
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2013137161
- Cited by
- 282
- References
- 71
- FWCI
- 21.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.