The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.
Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications
Abstract
The integration of nanotechnology into three‐dimensional printing (3DP) offers huge potential and opportunities for the manufacturing of 3D engineered materials exhibiting optimized properties and multifunctionality. The literature relating to different 3DP techniques used to fabricate 3D structures at the macro‐ and microscale made of nanocomposite materials is reviewed here. The current state‐of‐the‐art fabrication methods, their main characteristics (e.g., resolutions, advantages, limitations), the process parameters, and materials requirements are discussed. A comprehensive review is carried out on the use of metal‐ and carbon‐based nanomaterials incorporated into polymers or hydrogels for the manufacturing of 3D structures, mostly at the microscale, using different 3D‐printing techniques. Several methods, including but not limited to micro‐stereolithography, extrusion‐based direct‐write technologies, inkjet‐printing techniques, and popular powder‐bed technology, are discussed. Various examples of 3D nanocomposite macro‐ and microstructures manufactured using different 3D‐printing technologies for a wide range of domains such as microelectromechanical systems (MEMS), lab‐on‐a‐chip, microfluidics, engineered materials and composites, microelectronics, tissue engineering, and biosystems are reviewed. Parallel advances on materials and techniques are still required in order to employ the full potential of 3D printing of multifunctional nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Mechanical Reinforcement of Polymers Using Carbon Nanotubes
Coleman, J. N., Khan, U., & Gun'ko, Y. K. (2006) · Advanced Materials · doi:10.1002/adma.200501851 · Cited by 1,621
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor
Hu, N., Karube, Y., Yan, C., Masuda, Z., & Fukunaga, H. (2008) · Acta Materialia · doi:10.1016/j.actamat.2008.02.030 · Cited by 990
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding
Abbasi, H., Antunes, M., & Velasco, J. I. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.02.003 · Cited by 744
Li, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Metallic Biomaterials: Current Challenges and Opportunities
Prasad, K., Bazaka, O., Chua, M., Rochford, M., Fedrick, L., Spoor, J., Symes, R., Tieppo, M., Collins, C., Cao, A., et al. (2017) · Materials · doi:10.3390/ma10080884 · Cited by 662
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Self-citationYang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
Recent advances in three-dimensional graphene based materials for catalysis applications
Qiu, B., Xing, M., & Zhang, J. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00904f · Cited by 502
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.006 · Cited by 465
3D Printed Stretchable Tactile Sensors
Guo, S., Qiu, K., Meng, F., Park, S. H., & McAlpine, M. C. (2017) · Advanced Materials · doi:10.1002/adma.201701218 · Cited by 445
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Zhu, K., Shin, S. R., van Kempen, T., Li, Y., Ponraj, V., Nasajpour, A., Mandla, S., Hu, N., Liu, X., Leijten, J., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605352 · Cited by 386
Shahzad, A., & Lazoglu, I. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109249 · Cited by 372
Gutiérrez, M., Zhang, Y., & Tan, J.-C. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00980 · Cited by 351
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Wan, X., Luo, L., Liu, Y., & Leng, J. (2020) · Advanced Science · doi:10.1002/advs.202001000 · Cited by 337
Advancements in nanomaterials for nanosensors: a comprehensive review
Darwish, M. A., Abd-Elaziem, W., Elsheikh, A., & Zayed, A. A. (2024) · Nanoscale Advances · doi:10.1039/d4na00214h · Cited by 334
Noninvasive in vivo 3D bioprinting
Chen, Y., Zhang, J., Liu, X., Wang, S., Tao, J., Huang, Y., Wu, W., Li, Y., Zhou, K., Wei, X., et al. (2020) · Science Advances · doi:10.1126/sciadv.aba7406 · Cited by 316
Advances in 3D printing for polymer composites: A review
Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J. (2024) · InfoMat · doi:10.1002/inf2.12568 · Cited by 310
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Lv, X., Ye, F., Cheng, L., Fan, S., & Liu, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.012 · Cited by 302
3D Graphene‐Based H2‐Production Photocatalyst and Electrocatalyst
Kuang, P., Sayed, M., Fan, J., Cheng, B., & Yu, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903802 · Cited by 302
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Chaudhary, R. P., Parameswaran, C., Idrees, M., Rasaki, A. S., Liu, C., Chen, Z., & Colombo, P. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100969 · Cited by 295
Additive Manufacturing: Unlocking the Evolution of Energy Materials
Zhakeyev, A., Wang, P., Zhang, L., Shu, W., Wang, H., & Xuan, J. (2017) · Advanced Science · doi:10.1002/advs.201700187 · Cited by 291
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Li, H., & Liang, J. (2020) · Advanced Materials · doi:10.1002/adma.201805864 · Cited by 263
Functional Materials for Two‐Photon Polymerization in Microfabrication
Carlotti, M., & Mattoli, V. (2019) · Small · doi:10.1002/smll.201902687 · Cited by 260
3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries
Shen, K., Mei, H., Li, B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701527 · Cited by 256
4D printed thermally activated self-healing and shape memory polycaprolactone-based polymers
Invernizzi, M., Turri, S., Levi, M., & Suriano, R. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.023 · Cited by 229
Aerogels: Promising Nanostructured Materials for Energy Conversion and Storage Applications
Alwin, S., & Sahaya Shajan, X. (2020) · Materials for Renewable and Sustainable Energy · doi:10.1007/s40243-020-00168-4 · Cited by 157
Stereolithography 3D printing technology in pharmaceuticals: a review
Deshmane, S., Kendre, P., Mahajan, H., & Jain, S. (2021) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2021.1994990 · Cited by 103
Metadata
- Authors
- Farahani, R. D., Dubé, M., & Therriault, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2016-05-02
- Volume
- 28
- Issue
- 28
- Pages
- 5794-5821
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2346885928
- Cited by
- 604
- References
- 82
- FWCI
- 56.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.