The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.
Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications
Abstract
The integration of nanotechnology into three‐dimensional printing (3DP) offers huge potential and opportunities for the manufacturing of 3D engineered materials exhibiting optimized properties and multifunctionality. The literature relating to different 3DP techniques used to fabricate 3D structures at the macro‐ and microscale made of nanocomposite materials is reviewed here. The current state‐of‐the‐art fabrication methods, their main characteristics (e.g., resolutions, advantages, limitations), the process parameters, and materials requirements are discussed. A comprehensive review is carried out on the use of metal‐ and carbon‐based nanomaterials incorporated into polymers or hydrogels for the manufacturing of 3D structures, mostly at the microscale, using different 3D‐printing techniques. Several methods, including but not limited to micro‐stereolithography, extrusion‐based direct‐write technologies, inkjet‐printing techniques, and popular powder‐bed technology, are discussed. Various examples of 3D nanocomposite macro‐ and microstructures manufactured using different 3D‐printing technologies for a wide range of domains such as microelectromechanical systems (MEMS), lab‐on‐a‐chip, microfluidics, engineered materials and composites, microelectronics, tissue engineering, and biosystems are reviewed. Parallel advances on materials and techniques are still required in order to employ the full potential of 3D printing of multifunctional nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Mechanical Reinforcement of Polymers Using Carbon Nanotubes
Coleman, J. N., Khan, U., & Gun'ko, Y. K. (2006) · Advanced Materials · doi:10.1002/adma.200501851 · Cited by 1,621
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor
Hu, N., Karube, Y., Yan, C., Masuda, Z., & Fukunaga, H. (2008) · Acta Materialia · doi:10.1016/j.actamat.2008.02.030 · Cited by 990
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Leigh, S. J., Bradley, R. J., Purssell, C. P., Billson, D. R., & Hutchins, D. A. (2012) · PLoS ONE · doi:10.1371/journal.pone.0049365 · Cited by 787
Chiang, I. W., Brinson, B. E., Huang, A. Y., Willis, P. A., Bronikowski, M. J., Margrave, J. L., Smalley, R. E., & Hauge, R. H. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp0114891 · Cited by 744
Three‐dimensional optical laser lithography beyond the diffraction limit
Fischer, J., & Wegener, M. (2013) · Laser & Photonics Reviews · doi:10.1002/lpor.201100046 · Cited by 709
Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly
Therriault, D., White, S. R., & Lewis, J. A. (2003) · Nature Materials · doi:10.1038/nmat863 · Cited by 707
Self-citationPhotoinitiated crosslinking polymerisation
Decker, C. (1996) · Progress in Polymer Science · doi:10.1016/0079-6700(95)00027-5 · Cited by 686
Covalent Functionalization of Single-Walled Carbon Nanotubes for Materials Applications
Dyke, C. A., & Tour, J. M. (2004) · The Journal of Physical Chemistry A · doi:10.1021/jp046274g · Cited by 659
Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces
Adams, J. J., Duoss, E. B., Malkowski, T. F., Motala, M. J., Ahn, B. Y., Nuzzo, R. G., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201003734 · Cited by 630
Mechanisms, Capabilities, and Applications of High‐Resolution Electrohydrodynamic Jet Printing
Onses, M. S., Sutanto, E., Ferreira, P. M., Alleyne, A. G., & Rogers, J. A. (2015) · Small · doi:10.1002/smll.201500593 · Cited by 603
Infrared Spectral Evidence for the Etching of Carbon Nanotubes: Ozone Oxidation at 298 K
Mawhinney, D. B., Naumenko, V., Kuznetsova, A., Yates, J. T., Liu, J., & Smalley, R. E. (2000) · Journal of the American Chemical Society · doi:10.1021/ja994094s · Cited by 601
Rong, M. Z., Zhang, M. Q., & Ruan, W. H. (2006) · Materials Science and Technology · doi:10.1179/174328406x101247 · Cited by 558
Opening and purification of carbon nanotubes in high yields
Hiura, H., Ebbesen, T. W., & Tanigaki, K. (1995) · Advanced Materials · doi:10.1002/adma.19950070304 · Cited by 551
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Kuznetsova, A., Popova, I., Yates, J. T., Bronikowski, M. J., Huffman, C. B., Liu, J., Smalley, R. E., Hwu, H. H., & Chen, J. G. (2001) · Journal of the American Chemical Society · doi:10.1021/ja011021b · Cited by 520
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing
Frutiger, A., Muth, J. T., Vogt, D. M., Mengüç, Y., Campo, A., Valentine, A. D., Walsh, C. J., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500072 · Cited by 468
Measurement of anisotropic compressive strength of rapid prototyping parts
Lee, C. S., Kim, S. G., Kim, H. J., et al. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.11.095 · Cited by 467
Composites by rapid prototyping technology
Kumar, S., & Kruth, J.-P. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.045 · Cited by 463
Enhancement of adsorption inside of single-walled nanotubes: opening the entry ports
Kuznetsova, A., Mawhinney, D. B., Naumenko, V., Yates, J. T., Liu, J., & Smalley, R. E. (2000) · Chemical Physics Letters · doi:10.1016/s0009-2614(00)00341-9 · Cited by 463
Overcoming the Insolubility of Carbon Nanotubes Through High Degrees of Sidewall Functionalization
Dyke, C. A., & Tour, J. M. (2004) · Chemistry – A European Journal · doi:10.1002/chem.200305534 · Cited by 448
Yao, Z., Braidy, N., Botton, G. A., & Adronov, A. (2003) · Journal of the American Chemical Society · doi:10.1021/ja037564y · Cited by 445
3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
A review on the processing accuracy of two-photon polymerization
Zhou, X., Hou, Y., & Lin, J. (2015) · AIP Advances · doi:10.1063/1.4916886 · Cited by 422
Fluorination of Single-Wall Carbon Nanotubes and Subsequent Derivatization Reactions
Khabashesku, V. N., Billups, W. E., & Margrave, J. L. (2002) · Accounts of Chemical Research · doi:10.1021/ar020146y · Cited by 404
Postiglione, G., Natale, G., Griffini, G., Levi, M., & Turri, S. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.05.014 · Cited by 399
Direct writing of three-dimensional webs
Gratson, G. M., Xu, M., & Lewis, J. A. (2004) · Nature · doi:10.1038/428386a · Cited by 389
Directed Colloidal Assembly of 3D Periodic Structures
Smay, J. E., Gratson, G. M., Shepherd, R. F., Cesarano, J., & Lewis, J. A. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020916)14:18<1279::aid-adma1279>3.0.co;2-a · Cited by 388
Zhang, A. P., Qu, X., Soman, P., Hribar, K. C., Lee, J. W., Chen, S., & He, S. (2012) · Advanced Materials · doi:10.1002/adma.201202024 · Cited by 360
Stevens, J. L., Huang, A. Y., Peng, H., Chiang, I. W., Khabashesku, V. N., & Margrave, J. L. (2003) · Nano Letters · doi:10.1021/nl025944w · Cited by 349
In situ stabilized carbon nanofiber (CNF) reinforced epoxy nanocomposites
Zhu, J., Wei, S., Ryu, J., Budhathoki, M., Liang, G., & Guo, Z. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00063a · Cited by 339
Chi, K., Zhang, Z., Xi, J., Huang, Y., Xiao, F., Wang, S., & Liu, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504539k · Cited by 339
Bio-inspired detoxification using 3D-printed hydrogel nanocomposites
Gou, M., Qu, X., Zhu, W., Xiang, M., Yang, J., Zhang, K., Wei, Y., & Chen, S. (2014) · Nature Communications · doi:10.1038/ncomms4774 · Cited by 323
An, B. W., Kim, K., Lee, H., Kim, S., Shim, Y., Lee, D., Song, J. Y., & Park, J. (2015) · Advanced Materials · doi:10.1002/adma.201502092 · Cited by 306
Efficient Load Transfer to Polymer‐Grafted Multiwalled Carbon Nanotubes in Polymer Composites
Hwang, G. L., Shieh, Y. ‐., & Hwang, K. C. (2004) · Advanced Functional Materials · doi:10.1002/adfm.200305382 · Cited by 277
Epoxy/graphene nanocomposites – processing and properties: a review
Wei, J., Vo, T., & Inam, F. (2015) · RSC Advances · doi:10.1039/c5ra13897c · Cited by 267
Nanocomposites of graphene/polymers: a review
Chee, W. K., Lim, H. N., Huang, N. M., & Harrison, I. (2015) · RSC Advances · doi:10.1039/c5ra07989f · Cited by 263
3D Printing of Reduced Graphene Oxide Nanowires
Kim, J. H., Chang, W. S., Kim, D., Yang, J. R., Han, J. T., Lee, G., Kim, J. T., & Seol, S. K. (2015) · Advanced Materials · doi:10.1002/adma.201404380 · Cited by 258
Copper nanowire/polystyrene nanocomposites: Lower percolation threshold and higher EMI shielding
Al-Saleh, M. H., Gelves, G. A., & Sundararaj, U. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.10.003 · Cited by 253
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
Goodridge, R. D., Shofner, M. L., Hague, R. J. M., McClelland, M., Schlea, M. R., Johnson, R. B., & Tuck, C. J. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2010.10.011 · Cited by 234
Fugitive Inks for Direct‐Write Assembly of Three‐Dimensional Microvascular Networks
Therriault, D., Shepherd, R. F., White, S. R., & Lewis, J. A. (2005) · Advanced Materials · doi:10.1002/adma.200400481 · Cited by 233
Self-citationWater-Soluble, Exfoliated, Nonroping Single-Wall Carbon Nanotubes
Hudson, J. L., Casavant, M. J., & Tour, J. M. (2004) · Journal of the American Chemical Society · doi:10.1021/ja0467061 · Cited by 224
Sumfleth, J., Adroher, X. C., & Schulte, K. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3434-7 · Cited by 210
Development of a 3D printer using scanning projection stereolithography
Lee, M. P., Cooper, G. J. T., Hinkley, T., Gibson, G. M., Padgett, M. J., & Cronin, L. (2015) · Scientific Reports · doi:10.1038/srep09875 · Cited by 209
Ultraviolet‐Assisted Direct‐Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils
Lebel, L. L., Aïssa, B., Khakani, M. A. E., & Therriault, D. (2009) · Advanced Materials · doi:10.1002/adma.200902192 · Cited by 209
Self-citationSolvent‐Cast Three‐Dimensional Printing of Multifunctional Microsystems
Guo, S., Gosselin, F., Guerin, N., Lanouette, A., Heuzey, M., & Therriault, D. (2013) · Small · doi:10.1002/smll.201300975 · Cited by 203
Self-citationAn overview of the engineered graphene nanostructures and nanocomposites
Zhu, J., Chen, M., He, Q., Shao, L., Wei, S., & Guo, Z. (2013) · RSC Advances · doi:10.1039/c3ra44621b · Cited by 190
Patterning conductive PDMS nanocomposite in an elastomer using microcontact printing
Liu, C.-X., & Choi, J.-W. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/8/085019 · Cited by 186
Pitts, J. D., Campagnola, P. J., Epling, G. A., & Goodman, S. L. (2000) · Macromolecules · doi:10.1021/ma9910437 · Cited by 182
Three‐Dimensional μ‐Printing: An Enabling Technology
Hohmann, J. K., Renner, M., Waller, E. H., & von Freymann, G. (2015) · Advanced Optical Materials · doi:10.1002/adom.201500328 · Cited by 165
Three-dimensional printing of freeform helical microstructures: a review
Farahani, R. D., Chizari, K., & Therriault, D. (2014) · Nanoscale · doi:10.1039/c4nr02041c · Cited by 160
Self-citationRapid prototyping of electrically conductive components using 3D printing technology
Czyżewski, J., Burzyński, P., Gaweł, K., & Meisner, J. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.03.015 · Cited by 151
3D printing of a multifunctional nanocomposite helical liquid sensor
Guo, S., Yang, X., Heuzey, M.-C., & Therriault, D. (2015) · Nanoscale · doi:10.1039/c5nr00278h · Cited by 147
Self-citationAlateyah, A. I., Dhakal, H. N., & Zhang, Z. (2013) · Advances in Polymer Technology · doi:10.1002/adv.21368 · Cited by 145
Direct-write fabrication of freestanding nanocomposite strain sensors
Farahani, R. D., Dalir, H., Borgne, V. L., Gautier, L., Khakani, M. A. E., Lévesque, M., & Therriault, D. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/8/085502 · Cited by 120
Self-citationWang, M., Pramoda, K. P., & Goh, S. H. (2005) · Polymer · doi:10.1016/j.polymer.2005.10.007 · Cited by 118
Guo, S., Heuzey, M.-C., & Therriault, D. (2014) · Langmuir · doi:10.1021/la4036425 · Cited by 111
Self-citationAccelerated Self‐Healing Via Ternary Interpenetrating Microvascular Networks
Hansen, C. J., White, S. R., Sottos, N. R., & Lewis, J. A. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101553 · Cited by 108
Leigh, S. J., Purssell, C. P., Bowen, J., Hutchins, D. A., Covington, J. A., & Billson, D. R. (2011) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2011.03.058 · Cited by 104
An, B. W., Kim, K., Kim, M., Kim, S.-Y., Hur, S. H., & Park, J. (2015) · Small · doi:10.1002/smll.201403131 · Cited by 103
Phase Behavior and Rheological Properties of Polyelectrolyte Inks for Direct-Write Assembly
Gratson, G. M., & Lewis, J. A. (2004) · Langmuir · doi:10.1021/la048228d · Cited by 97
Inkjet printed acrylic formulations based on UV-reduced graphene oxide nanocomposites
Giardi, R., Porro, S., Chiolerio, A., Celasco, E., & Sangermano, M. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6866-4 · Cited by 78
Castro, N. J., Patel, R., & Zhang, L. G. (2015) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-015-0389-4 · Cited by 73
Yamada, A., Niikura, F., & Ikuta, K. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/2/025035 · Cited by 62
Annealed graphene sheets decorated with silver nanoparticles for inkjet printing
Wang, G., Wang, Z., Liu, Z., Xue, J., Xin, G., Yu, Q., Lian, J., & Chen, M. Y. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.037 · Cited by 58
Farahani, R. D., Lebel, L. L., & Therriault, D. (2014) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/24/5/055020 · Cited by 57
Self-citationVatani, M., Engeberg, E. D., & Choi, J. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.12.009 · Cited by 54
Microcontact Printing of CdS/Dendrimer Nanocomposite Patterns on Silicon Wafers
Wu, X. C., Bittner, A. M., & Kern, K. (2004) · Advanced Materials · doi:10.1002/adma.200306040 · Cited by 53
Additive Manufacturing of Graphene–Hydroxyapatite Nanocomposite Structures
Azhari, A., Toyserkani, E., & Villain, C. (2014) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12309 · Cited by 53
Chiolerio, A., Roppolo, I., & Sangermano, M. (2013) · RSC Advances · doi:10.1039/c3ra22159h · Cited by 47
Lebel, L. L., Aïssa, B., Khakani, M. A. E., et al. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.12.004 · Cited by 45
UV‐assisted three‐dimensional printing of polymer nanocomposites based on inorganic fillers
Postiglione, G., Natale, G., Griffini, G., Levi, M., & Turri, S. (2015) · Polymer Composites · doi:10.1002/pc.23735 · Cited by 37
Farahani, R. D., Dalir, H., Aïssa, B., Khakani, M. A. E., Lévesque, M., & Therriault, D. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.08.016 · Cited by 16
Self-citationPatole, A. S., Ventura, I. A., & Gilles Lubineau, A. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42281 · Cited by 13
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding
Abbasi, H., Antunes, M., & Velasco, J. I. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.02.003 · Cited by 744
Li, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
Metadata
- Authors
- Farahani, R. D., Dubé, M., & Therriault, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2016-05-02
- Volume
- 28
- Issue
- 28
- Pages
- 5794-5821
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2346885928
- Cited by
- 604
- References
- 82
- FWCI
- 56.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.