The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
Abstract
To exploit the high energy density of the lithium (Li) metal battery, it is imperative to address the dendrite growth and interface instability of the anode. 3D hosts for Li metal are expected to suppress the growth of Li dendrites. Heterogeneous seeds are effective in guiding Li deposition and realizing spatial control over Li nucleation. Herein, this study shows that ultrafine silver (Ag) nanoparticles, which are synthesized via a novel rapid Joule heating method, can serve as nanoseeds to direct the deposition of Li within the 3D host materials, resolving the problems of the Li metal anode. By optimizing the Joule heating method, ultrafine Ag nanoparticles (≈40 nm) are homogeneously anchored on carbon nanofibers. The Ag nanoseeds effectively reduce the nucleation overpotential of Li and guide the Li deposition in the 3D carbon matrix uniformly, free from the dendrites. A stable and reversible Li metal anode is achieved in virtue of the Ag nanoseeds in the 3D substrate, showing a low overpotential (≈0.025 V) for a long cycle life. The ultrafine nanoseeds achieved by rapid Joule heating render uniform deposition of Li metal anode in 3D hosts, promising a safe and long‐life Li metal battery for high‐energy applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Promises and challenges of nanomaterials for lithium-based rechargeable batteries
Sun, Y., Liu, N., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.71 · Cited by 1,703
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Cited by
Lee, Y.-G., Fujiki, S., Jung, C., Suzuki, N., Yashiro, N., Omoda, R., Ko, D.-S., Shiratsuchi, T., Sugimoto, T., Ryu, S., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0575-z · Cited by 1,708
Coralloid Carbon Fiber-Based Composite Lithium Anode for Robust Lithium Metal Batteries
Zhang, R., Chen, X., Shen, X., Zhang, X.-Q., Chen, X.-R., Cheng, X.-B., Yan, C., Zhao, C.-Z., & Zhang, Q. (2018) · Joule · doi:10.1016/j.joule.2018.02.001 · Cited by 728
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Towards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Carbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
Developing High‐Performance Lithium Metal Anode in Liquid Electrolytes: Challenges and Progress
Li, S., Jiang, M., Xie, Y., Xu, H., Jia, J., & Li, J. (2018) · Advanced Materials · doi:10.1002/adma.201706375 · Cited by 535
Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode
Chen, H., Pei, A., Lin, D., Xie, J., Yang, A., Xu, J., Lin, K., Wang, J., Wang, H., Shi, F., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900858 · Cited by 472
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Zhao, H., Lei, D., He, Y., Yuan, Y., Yun, Q., Ni, B., Lv, W., Li, B., Yang, Q., Kang, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800266 · Cited by 431
Dendrite‐Free Sodium‐Metal Anodes for High‐Energy Sodium‐Metal Batteries
Sun, B., Li, P., Zhang, J., Wang, D., Munroe, P., Wang, C., Notten, P. H. L., & Wang, G. (2018) · Advanced Materials · doi:10.1002/adma.201801334 · Cited by 416
Lithium‐Metal Batteries: From Fundamental Research to Industrialization
Kim, S., Park, G., Lee, S. J., Seo, S., Ryu, K., Kim, C. H., & Choi, J. W. (2023) · Advanced Materials · doi:10.1002/adma.202206625 · Cited by 416
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Zou, P., Sui, Y., Zhan, H., Wang, C., Xin, H. L., Cheng, H.-M., Kang, F., & Yang, C. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01100 · Cited by 368
Self-citationYe, H., Zheng, Z., Yao, H., Liu, S., Zuo, T., Wu, X., Yin, Y., Li, N., Gu, J., Cao, F., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201811955 · Cited by 360
Dual‐Phase Single‐Ion Pathway Interfaces for Robust Lithium Metal in Working Batteries
Xu, R., Xiao, Y., Zhang, R., Cheng, X., Zhao, C., Zhang, X., Yan, C., Zhang, Q., & Huang, J. (2019) · Advanced Materials · doi:10.1002/adma.201808392 · Cited by 338
Perspectives for restraining harsh lithium dendrite growth: Towards robust lithium metal anodes
Wu, F., Yuan, Y.-X., Cheng, X.-B., Bai, Y., Li, Y., Wu, C., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.03.024 · Cited by 319
An Autotransferable g‐C3N4 Li+‐Modulating Layer toward Stable Lithium Anodes
Guo, Y., Niu, P., Liu, Y., Ouyang, Y., Li, D., Zhai, T., Li, H., & Cui, Y. (2019) · Advanced Materials · doi:10.1002/adma.201900342 · Cited by 314
Huang, G., Han, J., Zhang, F., Wang, Z., Kashani, H., Watanabe, K., & Chen, M. (2019) · Advanced Materials · doi:10.1002/adma.201805334 · Cited by 313
Zhang, X., Li, T., Li, B., Zhang, R., Shi, P., Yan, C., Huang, J., & Zhang, Q. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201911724 · Cited by 313
Li, W., Wang, K., Zhou, M., Zhan, H., Cheng, S., & Jiang, K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04085 · Cited by 306
Electrospinning‐Based Strategies for Battery Materials
Li, X., Chen, W., Qian, Q., Huang, H., Chen, Y., Wang, Z., Chen, Q., Yang, J., Li, J., & Mai, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000845 · Cited by 302
Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Park, S., Jin, H., & Yun, Y. S. (2020) · Advanced Materials · doi:10.1002/adma.202002193 · Cited by 301
Zheng, B., Lin, X., Zhang, X., Wu, D., & Matyjaszewski, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907006 · Cited by 291
Dai, H., Xi, K., Liu, X., Lai, C., & Zhang, S. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b08963 · Cited by 283
Progress and Perspective of Solid‐State Lithium–Sulfur Batteries
Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707570 · Cited by 282
Tuning wettability of molten lithium via a chemical strategy for lithium metal anodes
Wang, S.-H., Yue, J., Dong, W., Zuo, T.-T., Li, J.-Y., Liu, X., Zhang, X.-D., Liu, L., Shi, J.-L., Yin, Y.-X., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12938-4 · Cited by 279
Review—Li Metal Anode in Working Lithium-Sulfur Batteries
Cheng, X.-B., Huang, J.-Q., & Zhang, Q. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0111801jes · Cited by 277
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Xue, P., Liu, S., Shi, X., Sun, C., Lai, C., Zhou, Y., Sui, D., Chen, Y., & Liang, J. (2018) · Advanced Materials · doi:10.1002/adma.201804165 · Cited by 257
Metadata
- Authors
- Yang, C., Yao, Y., He, S., Xie, H., Hitz, E., & Hu, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-08-18
- Volume
- 29
- Issue
- 38
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2748084739
- Cited by
- 661
- References
- 40
- FWCI
- 29.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.