The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Novel Materials for 3D Printing by Photopolymerization
Abstract
The field of 3D printing, also known as additive manufacturing (AM), is developing rapidly in both academic and industrial research environments. New materials and printing technologies, which enable rapid and multimaterial printing, have given rise to new applications and utilizations. However, the main bottleneck for achieving many more applications is the lack of materials with new physical properties. Here, some of the recent reports on novel materials in this field, such as ceramics, glass, shape‐memory polymers, and electronics, are reviewed. Although new materials have been reported for all three main printing approaches—fused deposition modeling, binder jetting or laser sintering/melting, and photopolymerization‐based approaches, apparently, most of the novel physicochemical properties are associated with materials printed by photopolymerization approaches. Furthermore, the high resolution that can be achieved using this type of 3D printing, together with the new properties, has resulted in new implementations such as microfluidic, biomedical devices, and soft robotics. Therefore, the focus here is on photopolymerization‐based additive manufacturing including the recent development of new methods, novel monomers, and photoinitiators, which result in previously inaccessible applications such as complex ceramic structures, embedded electronics, and responsive 3D objects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Self-citationThree-dimensional printing of transparent fused silica glass
Kotz, F., Arnold, K., Bauer, W., Schild, D., Keller, N., Sachsenheimer, K., Nargang, T. M., Richter, C., Helmer, D., & Rapp, B. E. (2017) · Nature · doi:10.1038/nature22061 · Cited by 876
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
Self-citationActive printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
Halloran, J. W. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031841 · Cited by 544
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Farsari, M., & Chichkov, B. N. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.131 · Cited by 466
Stereolithography of SiOC Ceramic Microcomponents
Zanchetta, E., Cattaldo, M., Franchin, G., Schwentenwein, M., Homa, J., Brusatin, G., & Colombo, P. (2016) · Advanced Materials · doi:10.1002/adma.201503470 · Cited by 432
Digital light processing 3D printing of conductive complex structures
Mu, Q., Wang, L., Dunn, C. K., Kuang, X., Duan, F., Zhang, Z., Qi, H. J., & Wang, T. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.08.011 · Cited by 411
He, R., Liu, W., Wu, Z., An, D., Huang, M., Wu, H., Jiang, Q., Ji, X., Wu, S., & Xie, Z. (2018) · Ceramics International · doi:10.1016/j.ceramint.2017.11.135 · Cited by 357
3D-printed microfluidic devices
Amin, R., Knowlton, S., Hart, A., Yenilmez, B., Ghaderinezhad, F., Katebifar, S., Messina, M., Khademhosseini, A., & Tasoglu, S. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/022001 · Cited by 349
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
3D printed microfluidic devices with integrated valves
Rogers, C. I., Qaderi, K., Woolley, A. T., & Nordin, G. P. (2015) · Biomicrofluidics · doi:10.1063/1.4905840 · Cited by 297
3D printing of piezoelectric element for energy focusing and ultrasonic sensing
Chen, Z., Song, X., Lei, L., Chen, X., Fei, C., Chiu, C. T., Qian, X., Ma, T., Yang, Y., Shung, K., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.048 · Cited by 277
High-performance 3D printing of hydrogels by water-dispersible photoinitiator nanoparticles
Pawar, A. A., Saada, G., Cooperstein, I., Larush, L., Jackman, J. A., Tabaei, S. R., Cho, N.-J., & Magdassi, S. (2016) · Science Advances · doi:10.1126/sciadv.1501381 · Cited by 270
Self-citation3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles
Fantino, E., Chiappone, A., Roppolo, I., Manfredi, D., Bongiovanni, R., Pirri, C. F., & Calignano, F. (2016) · Advanced Materials · doi:10.1002/adma.201505109 · Cited by 253
A review on 3D printed smart devices for 4D printing
Lee, J., Kim, H.-C., Choi, J.-W., & Lee, I. H. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0042-x · Cited by 209
Lithography‐Based Additive Manufacturing of Cellular Ceramic Structures
Felzmann, R., Gruber, S., Mitteramskogler, G., Tesavibul, P., Boccaccini, A. R., Liska, R., & Stampfl, J. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201200010 · Cited by 203
de Hazan, Y., & Penner, D. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.03.021 · Cited by 200
Zeng, Y., Yan, Y., Yan, H., Liu, C., Li, P., Dong, P., Zhao, Y., & Chen, J. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-1992-2 · Cited by 185
Digital light processing of ceramic components from polysiloxanes
Schmidt, J., & Colombo, P. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.07.033 · Cited by 170
Transparent conductive grids via direct writing of silver nanoparticle inks
Ahn, B. Y., Lorang, D. J., & Lewis, J. A. (2011) · Nanoscale · doi:10.1039/c1nr10048c · Cited by 158
Wu, W., Ye, W., Wu, Z., Geng, P., Wang, Y., & Zhao, J. X. (2017) · Materials · doi:10.3390/ma10080970 · Cited by 144
Zhang, S., Sha, N., & Zhao, Z. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.12.013 · Cited by 136
4D printing shape memory polymers for dynamic jewellery and fashionwear
Zarek, M., Layani, M., Eliazar, S., Mansour, N., Cooperstein, I., Shukrun, E., Szlar, A., Cohn, D., & Magdassi, S. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1244085 · Cited by 134
Self-citationMultimaterials 3D Printing for Free Assembly Manufacturing of Magnetic Driving Soft Actuator
Ji, Z., Yan, C., Yu, B., Wang, X., & Zhou, F. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700629 · Cited by 131
Self-citation3D-Printed Self-Folding Electronics
Sundaram, S., Kim, D. S., Baldo, M. A., Hayward, R. C., & Matusik, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10443 · Cited by 120
3D printing of responsive hydrogels for drug-delivery systems
Larush, L., Kaner, I., Fluksman, A., Tamsut, A., Pawar, A. A., Lesnovski, P., Benny, O., & Magdassi, S. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0009 · Cited by 108
Self-citationPawar, A. A., Halivni, S., Waiskopf, N., Ben‐Shahar, Y., Soreni‐Harari, M., Bergbreiter, S., Banin, U., & Magdassi, S. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01870 · Cited by 106
Self-citationHierarchically self-morphing structure through 4D printing
Teoh, J. E. M., An, J., Chua, C. K., Lv, M. Y., Krishnasamy, V., & Liu, Y. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1272174 · Cited by 98
Geometric characterization of additively manufactured polymer derived ceramics
Hundley, J. M., Eckel, Z. C., Schueller, E. C., Cante, K., Biesboer, S. M., Yahata, B. D., & Schaedler, T. A. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.009 · Cited by 70
Four-Dimensional (4D) Printing: Applying Soft Adaptive Materials to Additive Manufacturing
Li, Z., & Loh, X. J. (2017) · Journal of Molecular and Engineering Materials · doi:10.1142/s2251237317400032 · Cited by 20
3D‐Printed Autonomous Sensory Composites
Sundaram, S., Jiang, Z., Sitthi‐Amorn, P., Kim, D. S., Baldo, M. A., & Matusik, W. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201600257 · Cited by 18
4D Printing: An Emerging Technology in Manufacturing?
Ghi, A., & Rossetti, F. (2016) · Lecture notes in information systems and organisation · doi:10.1007/978-3-319-40265-9_12 · Cited by 14
Bio nano ink for 4D printing membrane proteins
Mathews, A. S., Abraham, S., Kumaran, S. K., Fan, J., & Montemagno, C. D. (2017) · RSC Advances · doi:10.1039/c7ra07650a · Cited by 14
Cited by
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications
Tian, Y., Chen, C., Xu, X., Wang, J., Hou, X., Li, K., Lu, X., Shi, H., Lee, E.-S., & Jiang, H. B. (2021) · Scanning · doi:10.1155/2021/9950131 · Cited by 569
Conductive nanomaterials for 2D and 3D printed flexible electronics
Kamyshny, A., & Magdassi, S. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 469
Self-citationProjection micro stereolithography based 3D printing and its applications
Ge, Q., Li, Z., Wang, Z., Kowsari, K., Zhang, W., He, X., Zhou, J., & Fang, N. X. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab8d9a · Cited by 444
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Metadata
- Authors
- Layani, M., Wang, X., & Magdassi, S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-05-13
- Volume
- 30
- Issue
- 41
- Pages
- e1706344-e1706344
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2803265486
- Cited by
- 561
- References
- 47
- FWCI
- 25.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.