The DOI matches its Crossref record; 94 of the 94 references it cites were found in a registry or an index.
Nanoscale Structure Design for High‐Performance Pt‐Based ORR Catalysts
Abstract
Proton‐exchange‐membrane fuel cells (PEMFCs) are of considerable interest for direct chemical‐to‐electrical energy conversion and may represent an ultimate solution for mobile power supply. However, PEMFCs today are primarily limited by the sluggish kinetics of the cathodic oxygen reduction reaction (ORR), which requires a significant amount of Pt‐based catalyst with a substantial contribution to the overall cost. Hence, promoting the activity and stability of the needed catalyst and minimizing the amount of Pt loaded are central to reducing the cost of PEMFCs for commercial deployment. Considerable efforts have been devoted to improving the catalytic performance of Pt‐based ORR catalysts, including the development of various Pt nanostructures with tunable sizes and chemical compositions, controlled shapes with selectively displayed crystallographic surfaces, tailored surface strains, surface doping, geometry engineering, and interface engineering. Herein, a brief introduction of some fundamentals of fuel cells and ORR catalysts with performance metrics is provided, followed by a detailed description of a series of strategies for pushing the limit of high‐performance Pt‐based catalysts. A brief perspective and new insights on the remaining challenges and future directions of Pt‐based ORR catalysts for fuel cells are also presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Methods: Fundamentals and Applications
de Rooij, D. M. R. (2003) · Anti-Corrosion Methods and Materials · doi:10.1108/acmm.2003.12850eae.001 · Cited by 13,009
Monodisperse FePt Nanoparticles and Ferromagnetic FePt Nanocrystal Superlattices
Sun, S., Murray, C. B., Weller, D., Folks, L., & Moser, A. (2000) · Science · doi:10.1126/science.287.5460.1989 · Cited by 6,137
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Improved Oxygen Reduction Activity on Pt 3 Ni(111) via Increased Surface Site Availability
Stamenkovic, V. R., Fowler, B., Mun, B. S., Wang, G., Ross, P. N., Lucas, C. A., & Marković, N. M. (2007) · Science · doi:10.1126/science.1135941 · Cited by 4,421
Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces
Stamenkovic, V. R., Mun, B. S., Arenz, M., Mayrhofer, K. J. J., Lucas, C. A., Wang, G., Ross, P. N., & Markovic, N. M. (2007) · Nature Materials · doi:10.1038/nmat1840 · Cited by 3,252
Alloys of platinum and early transition metals as oxygen reduction electrocatalysts
Greeley, J., Stephens, I. E. L., Bondarenko, A. S., Johansson, T. P., Hansen, H. A., Jaramillo, T. F., Rossmeisl, J., Chorkendorff, I., & Nørskov, J. K. (2009) · Nature Chemistry · doi:10.1038/nchem.367 · Cited by 3,203
Pd-Pt Bimetallic Nanodendrites with High Activity for Oxygen Reduction
Lim, B., Jiang, M., Camargo, P. H. C., Cho, E. C., Tao, J., Lu, X., Zhu, Y., & Xia, Y. (2009) · Science · doi:10.1126/science.1170377 · Cited by 2,986
Lattice-strain control of the activity in dealloyed core–shell fuel cell catalysts
Strasser, P., Koh, S., Anniyev, T., Greeley, J., More, K., Yu, C., Liu, Z., Kaya, S., Nordlund, D., Ogasawara, H., et al. (2010) · Nature Chemistry · doi:10.1038/nchem.623 · Cited by 2,984
Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces
Chen, C., Kang, Y., Huo, Z., Zhu, Z., Huang, W., Xin, H. L., Snyder, J. D., Li, D., Herron, J. A., Mavrikakis, M., et al. (2014) · Science · doi:10.1126/science.1249061 · Cited by 2,765
Surface science studies of model fuel cell electrocatalysts
Markovic, N. (2002) · Surface Science Reports · doi:10.1016/s0167-5729(01)00022-x · Cited by 2,143
Cited by
Review of Metal Catalysts for Oxygen Reduction Reaction: From Nanoscale Engineering to Atomic Design
Wang, X., Li, Z., Qu, Y., Yuan, T., Wang, W., Wu, Y., & Li, Y. (2019) · Chem · doi:10.1016/j.chempr.2019.03.002 · Cited by 876
Hou, C.-C., Wang, H.-F., Li, C., & Xu, Q. (2020) · Energy & Environmental Science · doi:10.1039/c9ee04040d · Cited by 536
Rabiee, H., Ge, L., Zhang, X., Hu, S., Li, M., & Yuan, Z. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03756g · Cited by 509
Molecular Design of Single‐Atom Catalysts for Oxygen Reduction Reaction
Wan, C., Duan, X., & Huang, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903815 · Cited by 439
Self-citationZhang, J., Yuan, Y., Gao, L., Zeng, G., Li, M., & Huang, H. (2021) · Advanced Materials · doi:10.1002/adma.202006494 · Cited by 420
An Overview and Future Perspectives of Rechargeable Zinc Batteries
Shi, Y., Chen, Y., Shi, L., Wang, K., Wang, B., Li, L., Ma, Y., Li, Y., Sun, Z., Ali, W., et al. (2020) · Small · doi:10.1002/smll.202000730 · Cited by 389
Chen, D., Zhu, J., Mu, X., Cheng, R., Li, W., Liu, S., Pu, Z., Lin, C., & Mu, S. (2020) · Applied Catalysis B: Environment and Energy · doi:10.1016/j.apcatb.2020.118729 · Cited by 387
Gao, L., Li, X., Yao, Z., Bai, H., Lu, Y., Ma, C., Lu, S., Peng, Z., Yang, J., Pan, A., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b07238 · Cited by 376
Design of Local Atomic Environments in Single‐Atom Electrocatalysts for Renewable Energy Conversions
Sun, T., Mitchell, S., Li, J., Lyu, P., Wu, X., Pérez‐Ramírez, J., & Lu, J. (2021) · Advanced Materials · doi:10.1002/adma.202003075 · Cited by 336
Ma, Z., Cano, Z. P., Yu, A., Chen, Z., Jiang, G., Fu, X., Yang, L., Wu, T., Bai, Z., & Lu, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202003654 · Cited by 331
Guo, J., Huo, J., Liu, Y., Wu, W., Wang, Y., Wu, M., Liu, H., & Wang, G. (2019) · Small Methods · doi:10.1002/smtd.201900159 · Cited by 326
High-Density Planar-like Fe2N6 Structure Catalyzes Efficient Oxygen Reduction
Zhang, N., Zhou, T., Ge, J., Lin, Y., Du, Z., Zhong, C., Wang, W., Jiao, Q., Yuan, R., Tian, Y., et al. (2020) · Matter · doi:10.1016/j.matt.2020.06.026 · Cited by 297
Platinum Group Metals: A Review of Resources, Production and Usage with a Focus on Catalysts
Hughes, A. E., Haque, N., Northey, S. A., & Giddey, S. (2021) · Resources · doi:10.3390/resources10090093 · Cited by 285
Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
Amorphizing noble metal chalcogenide catalysts at the single-layer limit towards hydrogen production
He, Y., Liu, L., Zhu, C., Guo, S., Golani, P., Koo, B., Tang, P., Zhao, Z., Xu, M., Zhu, C., et al. (2022) · Nature Catalysis · doi:10.1038/s41929-022-00753-y · Cited by 272
Self-citationIntermetallic Nanocrystals for Fuel-Cells-Based Electrocatalysis
Lin, F., Li, M., Zeng, L., Luo, M., & Guo, S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00382 · Cited by 257
Zhou, X., Gao, J., Hu, Y., Jin, Z., Hu, K., Reddy, K. M., Yuan, Q., Lin, X., & Qiu, H.-J. (2022) · Nano Letters · doi:10.1021/acs.nanolett.2c00658 · Cited by 253
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
Bioinspired and Bioderived Aqueous Electrocatalysis
Barrio, J., Pedersen, A., Favero, S., Luo, H., Wang, M., Sarma, S. C., Feng, J., Ngoc, L. T. T., Kellner, S., Li, A. Y., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00429 · Cited by 80
Su, H., Gao, W., Li, L., Yuan, H., & Wen, D. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c02126 · Cited by 50
Hu, X., Jiang, K., Wang, F., Geng, S., Liu, Y., Meng, S., Su, H., Zhu, S., Bu, L., Chen, C., et al. (2025) · ACS Nano · doi:10.1021/acsnano.5c10292 · Cited by 21
Metadata
- Authors
- Liu, M., Zhao, Z., Duan, X., & Huang, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-12-18
- Volume
- 31
- Issue
- 6
- Pages
- e1802234-e1802234
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2903672689
- Cited by
- 812
- References
- 94
- FWCI
- 15.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.