The DOI matches its Crossref record; 362 of the 362 references it cites were found in a registry or an index.
Porous Polymers as Multifunctional Material Platforms toward Task‐Specific Applications
Abstract
Exploring advanced porous materials is of critical importance in the development of science and technology. Porous polymers, being famous for their all‐organic components, tailored pore structures, and adjustable chemical components, have attracted an increasing level of research interest in a large number of applications, including gas adsorption/storage, separation, catalysis, environmental remediation, energy, optoelectronics, and health. Recent years have witnessed tremendous research breakthroughs in these fields thanks to the unique pore structures and versatile skeletons of porous polymers. Here, recent milestones in the diverse applications of porous polymers are presented, with an emphasis on the structural requirements or parameters that dominate their properties and functionalities. The Review covers the following applications: i) gas adsorption, ii) water treatment, iii) separation, iv) heterogeneous catalysis, v) electrochemical energy storage, vi) precursors for porous carbons, and vii) other applications (e.g., intelligent temperature control textiles, sensing, proton conduction, biomedicine, optoelectronics, and actuators). The key requirements for each application are discussed and an in‐depth understanding of the structure–property relationships of these advanced materials is provided. Finally, a perspective on the future research directions and challenges in this field is presented for further studies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–362 of 362
Moliner, M., Martínez, C., & Corma, A. (2014) · Chemistry of Materials · doi:10.1021/cm4015095 · Cited by 311
Mercury removal from water by ion exchange resins adsorption
Chiarle, S. (2000) · Water Research · doi:10.1016/s0043-1354(00)00044-0 · Cited by 311
High Conductive Two-Dimensional Covalent Organic Framework for Lithium Storage with Large Capacity
Yang, H., Zhang, S., Han, L., Zhang, Z., Xue, Z., Gao, J., Li, Y., Huang, C., Yi, Y., Liu, H., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12370 · Cited by 308
Ultrafast ion sieving using nanoporous polymeric membranes
Wang, P., Wang, M., Liu, F., Ding, S., Wang, X., Du, G., Liu, J., Apel, P., Kluth, P., Trautmann, C., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-02941-6 · Cited by 307
Band gap engineering in fluorescent conjugated microporous polymers
Jiang, J.-X., Trewin, A., Adams, D. J., & Cooper, A. I. (2011) · Chemical Science · doi:10.1039/c1sc00329a · Cited by 303
Arab, P., Rabbani, M. G., Sekizkardes, A. K., İslamoğlu, T., & El-Kaderi, H. M. (2014) · Chemistry of Materials · doi:10.1021/cm403161e · Cited by 300
Ghanem, B. S., Hashem, M., Harris, K. D. M., Msayib, K. J., Xu, M., Budd, P. M., Chaukura, N., Book, D., Tedds, S., Walton, A., et al. (2010) · Macromolecules · doi:10.1021/ma100640m · Cited by 295
Gu, C., Huang, N., Gao, J., Xu, F., Xu, Y., & Jiang, D. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201402141 · Cited by 295
Self-citationBen, T., Ren, H., Ma, S., Cao, D., Lan, J., Jing, X., Wang, W., Xu, J., Deng, F., Simmons, J. M., et al. (2009) · Angewandte Chemie · doi:10.1002/ange.200904637 · Cited by 291
Chiral induction in covalent organic frameworks
Han, X., Zhang, J., Huang, J., Wu, X., Yuan, D., Liu, Y., & Cui, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-03689-9 · Cited by 290
Amino-functionalized nanocrystalline cellulose as an adsorbent for anionic dyes
Jin, L., Li, W., Xu, Q., & Sun, Q. (2015) · Cellulose · doi:10.1007/s10570-015-0649-4 · Cited by 288
Highly Conductive Anion‐Exchange Membranes from Microporous Tröger's Base Polymers
Yang, Z., Guo, R., Malpass‐Evans, R., Carta, M., McKeown, N. B., Guiver, M. D., Wu, L., & Xu, T. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605916 · Cited by 288
Porous aromatic frameworks: Synthesis, structure and functions
Ben, T., & Qiu, S. (2013) · CrystEngComm · doi:10.1039/c2ce25409c · Cited by 283
Recent progress in two-dimensional COFs for energy-related applications
Zhan, X., Chen, Z., & Zhang, Q. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02105d · Cited by 275
Yin, Z.-J., Xu, S.-Q., Zhan, T.-G., Qi, Q.-Y., Wu, Z.-Q., & Zhao, X. (2017) · Chemical Communications · doi:10.1039/c7cc01045a · Cited by 273
The regeneration of field-spent granular-activated carbons
San Miguel, G., Lambert, S. D., & Graham, N. J. D. (2001) · Water Research · doi:10.1016/s0043-1354(00)00549-2 · Cited by 271
Toward a molecular design of porous carbon materials
Borchardt, L., Zhu, Q.-L., Casco, M. E., Berger, R., Zhuang, X., Kaskel, S., Feng, X., & Xu, Q. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.002 · Cited by 266
Zagklis, D. P., Vavouraki, A. I., Kornaros, M. E., & Paraskeva, C. A. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.11.038 · Cited by 263
Xu, F., Chen, X., Tang, Z., Wu, D., Fu, R., & Jiang, D. (2014) · Chem. Commun. · doi:10.1039/c4cc01002g · Cited by 263
Self-citationYe, Y., Zhang, L., Peng, Q., Wang, G.-E., Shen, Y., Li, Z., Wang, L., Ma, X., Chen, Q.-H., Zhang, Z., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511389q · Cited by 260
Montoro, C., Rodríguez‐San‐Miguel, D., Polo, E., Cid, R. E., Ruiz‐González, M. L., Navarro, J. A. R., Ocón, P., & Zamora, F. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05182 · Cited by 260
A history of industrial catalysis
Armor, J. N. (2010) · Catalysis Today · doi:10.1016/j.cattod.2009.11.019 · Cited by 251
Industrial Catalysis: A Practical Approach
Hagen, J. (2015) · Wiley eBooks · doi:10.1002/9783527684625 · Cited by 251
Xu, F., Cai, R., Zeng, Q., Zou, C., Wu, D., Li, F., Lu, X., Liang, Y., & Fu, R. (2011) · J. Mater. Chem. · doi:10.1039/c0jm02044c · Cited by 244
Self-citationXiang, Z., Mercado, R., Huck, J. M., Wang, H., Guo, Z., Wang, W., Cao, D., Haranczyk, M., & Smit, B. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06266 · Cited by 241
Determination of the optimal pore size for improved CO2 adsorption in activated carbon fibers
Lee, S.-Y., & Park, S.-J. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.09.018 · Cited by 239
Heidari, A., Younesi, H., Rashidi, A., & Ghoreyshi, A. A. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.06.004 · Cited by 237
Xu, Y., Tao, Y., Zheng, X., Ma, H., Luo, J., Kang, F., & Yang, Q. (2015) · Advanced Materials · doi:10.1002/adma.201504151 · Cited by 233
Bhunia, A., Vasylyeva, V., & Janiak, C. (2013) · Chemical Communications · doi:10.1039/c3cc41382a · Cited by 230
Carbon Aerogels and Monoliths: Control of Porosity and Nanoarchitecture via Sol–Gel routes
Antonietti, M., Fechler, N., & Fellinger, T.-P. (2014) · Chemistry of Materials · doi:10.1021/cm402239e · Cited by 227
Che, C.-M., & Huang, J.-S. (2009) · Chemical Communications · doi:10.1039/b901221d · Cited by 223
Carbon molecular sieve membranes derived from Matrimid® polyimide for nitrogen/methane separation
Ning, X., & Koros, W. J. (2014) · Carbon · doi:10.1016/j.carbon.2013.09.028 · Cited by 214
Bhosale, R., Míšek, J., Sakai, N., & Matile, S. (2010) · Chem. Soc. Rev. · doi:10.1039/b906115k · Cited by 213
Covalent triazine-based frameworks (CTFs) from triptycene and fluorene motifs for CO2adsorption
Dey, S., Bhunia, A., Esquivel, D., & Janiak, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00638h · Cited by 212
Liu, X., Zhou, L., Zhao, Y., Bian, L., Feng, X., & Pu, Q. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403175q · Cited by 207
Ultrathin two-dimensional porous organic nanosheets with molecular rotors for chemical sensing
Dong, J., Zhang, K., Li, X., Qian, Y., Zhu, H., Yuan, D., Xu, Q.-H., Jiang, J., & Zhao, D. (2017) · Nature Communications · doi:10.1038/s41467-017-01293-x · Cited by 202
Layered microporous polymers by solvent knitting method
Wang, S., Zhang, C., Shu, Y., Jiang, S., Xia, Q., Chen, L., Jin, S., Hussain, I., Cooper, A. I., & Tan, B. (2017) · Science Advances · doi:10.1126/sciadv.1602610 · Cited by 200
Nanoporous ionic organic networks: from synthesis to materials applications
Sun, J.-K., Antonietti, M., & Yuan, J. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00597g · Cited by 195
Design Principles for Covalent Organic Frameworks in Energy Storage Applications
Alahakoon, S. B., Thompson, C. M., Occhialini, G., & Smaldone, R. A. (2017) · ChemSusChem · doi:10.1002/cssc.201700120 · Cited by 192
Gas adsorption separation of CO2/CH4 system using zeolite 5A
Mofarahi, M., & Gholipour, F. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.08.022 · Cited by 191
Two fully conjugated covalent organic frameworks as anode materials for lithium ion batteries
Bai, L., Gao, Q., & Zhao, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06449c · Cited by 190
Sustainable Life Cycles of Natural-Precursor-Derived Nanocarbons
Bazaka, K., Jacob, M. V., & Ostrikov, K. (. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00566 · Cited by 188
Huang, J., Liang, Y., Hu, H., Liu, S., Cai, Y., Dong, H., Zheng, M., Xiao, Y., & Liu, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08046h · Cited by 188
Carbon Dioxide and Nitrogen Adsorption on Cation-Exchanged SSZ-13 Zeolites
Pham, T. D., Liu, Q., & Lobo, R. F. (2013) · Langmuir · doi:10.1021/la304138z · Cited by 186
Self-citationTerephthalonitrile-derived nitrogen-rich networks for high performance supercapacitors
Hao, L., Luo, B., Li, X., Jin, M., Fang, Y., Tang, Z., Jia, Y., Liang, M., Thomas, A., Yang, J., et al. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22814a · Cited by 184
Swaidan, R., Ma, X., Litwiller, E., & Pinnau, I. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.07.057 · Cited by 184
Li, Z., Wu, D., Liang, Y., Fu, R., & Matyjaszewski, K. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412192v · Cited by 182
Self-citationA mesoporous poly-melamine-formaldehyde polymer as a solid sorbent for toxic metal removal
Tan, M. X., Sum, Y. N., Ying, J. Y., & Zhang, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42216j · Cited by 181
Hao, L., Zhang, S., Liu, R., Ning, J., Zhang, G., & Zhi, L. (2015) · Advanced Materials · doi:10.1002/adma.201500863 · Cited by 180
Mailler, R., Gasperi, J., Coquet, Y., Buleté, A., Vulliet, E., Deshayes, S., Zedek, S., Mirande-Bret, C., Eudes, V., Bressy, A., et al. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2015.10.153 · Cited by 180
Anitha, K., Namsani, S., & Singh, J. K. (2015) · The Journal of Physical Chemistry A · doi:10.1021/acs.jpca.5b03352 · Cited by 178
Nikoloski, A. N., Ang, K.-L., & Li, D. (2015) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.12.006 · Cited by 177
Lee, S., Barin, G., Ackerman, C. M., Muchenditsi, A., Xu, J., Reimer, J. A., Lutsenko, S., Long, J. R., & Chang, C. J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b02515 · Cited by 176
Wang, H., Min, S., Ma, C., Liu, Z., Zhang, W., Wang, Q., Li, D., Li, Y., Turner, S., Han, Y., et al. (2017) · Nature Communications · doi:10.1038/ncomms13592 · Cited by 176
Synthesis of catalytically active porous organic polymers from metalloporphyrin building blocks
Shultz, A. M., Farha, O. K., Hupp, J. T., & Nguyen, S. T. (2011) · Chemical Science · doi:10.1039/c0sc00339e · Cited by 174
Adsorption separation of CO2, CH4, and N2 on microwave activated carbon
Yi, H., Li, F., Ning, P., Tang, X., Peng, J., Li, Y., & Deng, H. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.11.050 · Cited by 172
Jin, S., Sakurai, T., Kowalczyk, T., Dalapati, S., Xu, F., Wei, H., Chen, X., Gao, J., Seki, S., Irle, S., et al. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201402844 · Cited by 172
Self-citationLi, X.-C., Zhang, Y., Wang, C.-Y., Wan, Y., Lai, W.-Y., Pang, H., & Huang, W. (2017) · Chemical Science · doi:10.1039/c6sc05532j · Cited by 171
Design and preparation of porous carbons from conjugated polymer precursors
Xu, F., Wu, D., Fu, R., & Wei, B. (2017) · Materials Today · doi:10.1016/j.mattod.2017.04.026 · Cited by 169
Self-citationAdsorption separation of CO2/CH4 gas mixture on the commercial zeolites at atmospheric pressure
Li, Y., Yi, H., Tang, X., Li, F., & Yuan, Q. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.05.101 · Cited by 168
Li, L., Zhao, H., Wang, J.-Y., & Wang, R. (2014) · ACS Nano · doi:10.1021/nn501853g · Cited by 168
Porphyrin-based nanoporous network polymers
McKeown, N. B., Hanif, S., Msayib, K., Tattershall, C. E., & Budd, P. M. (2002) · Chemical Communications · doi:10.1039/b208702m · Cited by 167
Nanostructured Carbonaceous Materials from Molecular Precursors
Hoheisel, T. N., Schrettl, S., Szilluweit, R., & Frauenrath, H. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907180 · Cited by 166
Hierarchical Multi‐Step Folding of Polymer Bilayers
Stoychev, G., Turcaud, S., Dunlop, J. W. C., & Ionov, L. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203245 · Cited by 166
Microporous sulfur-doped carbon from thienyl-based polymer network precursors
Paraknowitsch, J. P., Thomas, A., & Schmidt, J. (2011) · Chemical Communications · doi:10.1039/c1cc12272j · Cited by 163
Sensing Solvents with Ultrasensitive Porous Poly(ionic liquid) Actuators
Zhao, Q., Heyda, J., Dzubiella, J., Täuber, K., Dunlop, J. W. C., & Yuan, J. (2015) · Advanced Materials · doi:10.1002/adma.201500533 · Cited by 163
Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400059t · Cited by 163
Self-citationByun, J., Patel, H. A., Thirion, D., & Yavuz, C. T. (2016) · Nature Communications · doi:10.1038/ncomms13377 · Cited by 159
Removal of highly polar micropollutants from wastewater by powdered activated carbon
Kovalova, L., Knappe, D. R. U., Lehnberg, K., Kazner, C., & Hollender, J. (2013) · Environmental Science and Pollution Research · doi:10.1007/s11356-012-1432-9 · Cited by 157
Porous aromatic frameworks with anion-templated pore apertures serving as polymeric sieves
Yuan, Y., Sun, F., Li, L., Cui, P., & Zhu, G. (2014) · Nature Communications · doi:10.1038/ncomms5260 · Cited by 155
Wu, D., Fu, R., Dresselhaus, M. S., & Dresselhaus, G. (2005) · Carbon · doi:10.1016/j.carbon.2005.09.022 · Cited by 149
Self-citationLarge pore donor–acceptor covalent organic frameworks
Jin, S., Furukawa, K., Addicoat, M. A., Chen, L., Takahashi, S., Irle, S., Nakamura, T., & Jiang, D. (2013) · Chemical Science · doi:10.1039/c3sc52034j · Cited by 146
Du, R., Zhang, N., Xu, H., Mao, N., Duan, W., Wang, J., Zhao, Q., Liu, Z., & Zhang, J. (2014) · Advanced Materials · doi:10.1002/adma.201403058 · Cited by 145
The origin of mammalian endothermy: a paradigm for the evolution of complex biological structure
Kemp, T. S. (2006) · Zoological Journal of the Linnean Society · doi:10.1111/j.1096-3642.2006.00226.x · Cited by 145
Pitch-based hyper-cross-linked polymers with high performance for gas adsorption
Gao, H., Ding, L., Bai, H., Liu, A., Li, S., & Li, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07033g · Cited by 145
Self-citationAdsorption kinetics for CO2 on highly selective zeolites NaKA and nano-NaKA
Cheung, O. Y. H., Bacsik, Z., Liu, Q., Mace, A., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.017 · Cited by 141
Self-citationBuilding multiple adsorption sites in porous polymer networks for carbon capture applications
Lu, W., Verdegaal, W. M., Yu, J., Balbuena, P. B., Jeong, H., & Zhou, H.-C. “. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42226g · Cited by 141
1,2,3-Triazolium-Based Poly(2,6-Dimethyl Phenylene Oxide) Copolymers as Anion Exchange Membranes
Liu, L., He, S., Zhang, S., Zhang, M., Guiver, M. D., & Li, N. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11519 · Cited by 141
Microporous organic polymers synthesized by self-condensation of aromatic hydroxymethyl monomers
Luo, Y., Zhang, S., Ma, Y., Wang, W., & Tan, B. (2012) · Polymer Chemistry · doi:10.1039/c2py20914d · Cited by 138
Hierarchical porous carbons: design, preparation, and performance in energy storage
Fu, R., Li, Z., Liang, Y., Li, F., Xu, F., & Wu, D. (2011) · New Carbon Materials · doi:10.1016/s1872-5805(11)60074-7 · Cited by 136
Self-citationZou, C. W., Wu, D., Li, M., Zeng, Q., Xu, F., Huang, Z., & Fu, R. (2009) · Journal of Materials Chemistry · doi:10.1039/b917960g · Cited by 136
Self-citationJiang, T., Liang, Y., He, Y., & Wang, Q. (2015) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2015.06.020 · Cited by 135
Luminescent Porous Polymers Based on Aggregation‐Induced Mechanism: Design, Synthesis and Functions
Dalapati, S., Gu, C., & Jiang, D. (2016) · Small · doi:10.1002/smll.201602427 · Cited by 135
Lv, Y., Du, Y., Qiu, W., & Xu, Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13761 · Cited by 131
Wang, H., Zhu, W., Liu, J., Dong, Z., & Liu, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02080 · Cited by 129
Guillerm, V., Weseliński, Ł. J., Alkordi, M. H., Mohideen, M. I. H., Belmabkhout, Y., Cairns, A., & Eddaoudi, M. (2013) · Chemical Communications · doi:10.1039/c3cc48228f · Cited by 128
Li, Z., Wu, D., Huang, X. W., Ma, J., Liu, H., Liang, Y., Fu, R., & Matyjaszewski, K. A. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00941j · Cited by 125
Self-citationMulik, S., Sotiriou‐Leventis, C., Churu, G., Lu, H., & Leventis, N. (2008) · Chemistry of Materials · doi:10.1021/cm800963h · Cited by 124
The use of tannin to prepare carbon gels. Part II. Carbon cryogels
Szczurek, A., Amaral-Labat, G., Fierro, V., Pizzi, A., & Celzard, A. (2011) · Carbon · doi:10.1016/j.carbon.2011.03.005 · Cited by 124
Ultralight Multifunctional Carbon‐Based Aerogels by Combining Graphene Oxide and Bacterial Cellulose
Li, C., Wu, Z., Liang, H., Chen, J., & Yu, S. (2017) · Small · doi:10.1002/smll.201700453 · Cited by 120
Enhanced carbon dioxide uptake by metalloporphyrin-based microporous covalent triazine framework
Liu, X., Li, H., Zhang, Y., Xu, B., Sigen, A., Xia, H., & Mu, Y. (2013) · Polymer Chemistry · doi:10.1039/c3py00083d · Cited by 119
Nanoporous Porphyrin Polymers for Gas Storage and Separation
Wang, Z., Yuan, S., Mason, A., Reprogle, B., Liu, D., & Yu, L. (2012) · Macromolecules · doi:10.1021/ma301426e · Cited by 119
Xuan, W., Ye, C., Zhang, M., Chen, Z., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc50487e · Cited by 111
The use of tannin to prepare carbon gels. Part I: Carbon aerogels
Szczurek, A., Amaral-Labat, G., Fierro, V., Pizzi, A., Masson, E., & Celzard, A. (2011) · Carbon · doi:10.1016/j.carbon.2011.03.007 · Cited by 110
Synthesis of conjugated covalent organic frameworks/graphene composite for supercapacitor electrodes
Wang, P., Wu, Q., Han, L., Wang, S., Fang, S., Zhang, Z., & Sun, S. (2015) · RSC Advances · doi:10.1039/c5ra02251g · Cited by 108
Wu, D., Li, Z., Zhong, M., Kowalewski, T., & Matyjaszewski, K. A. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309836 · Cited by 106
Self-citationZhong, H., Xu, F., Li, Z., Fu, R., & Wu, D. (2013) · Nanoscale · doi:10.1039/c3nr00738c · Cited by 104
Self-citationMulik, S., Sotiriou‐Leventis, C., & Leventis, N. (2008) · Chemistry of Materials · doi:10.1021/cm801428p · Cited by 104
Zhu, M., Xu, S., Wang, X., Chen, Y., Dai, L., & Zhao, X. (2018) · Chemical Communications · doi:10.1039/c8cc00203g · Cited by 103
Low-density organic and carbon aerogels from the sol–gel polymerization of phenol with formaldehyde
Wu, D., Fu, R., Sun, Z., & Yu, Z. (2005) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2005.02.008 · Cited by 102
Self-citationUnexpectedly strong anion–π interactions on the graphene flakes
Shi, G., Ding, Y., & Fang, H. (2012) · Journal of Computational Chemistry · doi:10.1002/jcc.22964 · Cited by 101
Byun, J., Je, S. H., Patel, H. A., Coşkun, A., & Yavuz, C. T. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00698d · Cited by 98
Flash freezing route to mesoporous polymer nanofibre networks
Samitsu, S., Zhang, R., Peng, X., Krishnan, M. R., Fujii, Y., & Ichinose, I. (2013) · Nature Communications · doi:10.1038/ncomms3653 · Cited by 96
Remarkable gas adsorption by carbonized nitrogen-rich hypercrosslinked porous organic polymers
Yang, X. Q., Yu, M., Zhao, Y., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02782e · Cited by 95
Zhong, H., Liu, C., Wang, Y., Wang, R., & Hong, M. (2015) · Chemical Science · doi:10.1039/c5sc04351d · Cited by 95
Wang, H., Zhu, W., Feng, L., Chen, Q., Chao, Y., Dong, Z., & Liu, Z. (2017) · Nano Research · doi:10.1007/s12274-017-1858-y · Cited by 95
Water-Dispersible, Responsive, and Carbonizable Hairy Microporous Polymeric Nanospheres
Mai, W., Sun, B., Chen, L., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08978 · Cited by 94
Jiang, G., Xu, F., Yang, S., Wu, J., Wei, B., & Wang, H. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.061 · Cited by 93
Self-citationCovalent Heme Framework as a Highly Active Heterogeneous Biomimetic Oxidation Catalyst
Wang, X.-S., Chrzanowski, M., Yuan, D., Sweeting, B. S., & Ma, S. (2014) · Chemistry of Materials · doi:10.1021/cm403860t · Cited by 88
Preparation of Polymeric Nanoscale Networks from Cylindrical Molecular Bottlebrushes
Wu, D., Nese, A., Pietrasik, J., Liang, Y., He, H., Kruk, M., Huang, L., Kowalewski, T., & Matyjaszewski, K. A. (2012) · ACS Nano · doi:10.1021/nn302096d · Cited by 88
Self-citationInexpensive polyphenylene network polymers with enhanced microporosity
Msayib, K. J., & McKeown, N. B. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03257e · Cited by 88
Facile synthesis of cost-effective porous aromatic materials with enhanced carbon dioxide uptake
Jing, X., Zou, D., Cui, P., Ren, H., & Zhu, G. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13115g · Cited by 87
Wu, D., Hui, C. M., Dong, H., Pietrasik, J., Ryu, H. J., Li, Z., Zhong, M., He, H., Kim, E. K., Jaroniec, M., et al. (2011) · Macromolecules · doi:10.1021/ma2013207 · Cited by 86
Self-citationLi, Y., Zheng, S., Liu, X., Li, P., Sun, L., Yang, R., Wang, S., Wu, Z., Bao, X., & Deng, W. (2017) · Angewandte Chemie · doi:10.1002/ange.201711169 · Cited by 86
Gas permeation and mechanical properties of thermally rearranged (TR) copolyimides
Liu, Q., Paul, D. R., & Freeman, B. D. (2015) · Polymer · doi:10.1016/j.polymer.2015.11.051 · Cited by 84
Self-citationSelf-Supported Fibrous Porous Aromatic Membranes for Efficient CO2/N2 Separations
Meng, L., Zou, X., Guo, S., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04148 · Cited by 84
He, Y., Gehrig, D. W., Zhang, F., Lu, C., Zhang, C., Cai, M., Wang, Y., Laquai, F., Zhuang, X., & Feng, X. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603693 · Cited by 84
Evans, J. D., Jelfs, K. E., Day, G. M., & Doonan, C. J. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00084g · Cited by 80
Zhang, X., Wang, Z., Lu, Y., Mai, Y., Liu, J., Hua, X., & Wei, H. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.11.002 · Cited by 80
Self-citationShen, C., Bao, Y., & Wang, Z. (2013) · Chemical Communications · doi:10.1039/c3cc41012a · Cited by 78
Klumpen, C., Breunig, M., Homburg, T., Stock, N., & Senker, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01949 · Cited by 78
İslamoğlu, T., Behera, S., Kahveci, Z., Tessema, T.-D., Jena, P., & El‐Kaderi, H. M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05326 · Cited by 77
Mondal, S., & Das, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06939d · Cited by 76
Reactive Template-Induced Self-Assembly to Ordered Mesoporous Polymeric and Carbonaceous Materials
Liang, Y., Fu, R., & Wu, D. (2013) · ACS Nano · doi:10.1021/nn305841e · Cited by 76
Self-citationCarbon aerogel spheres prepared via alcohol supercritical drying
Liu, N., Zhang, S., Fu, R., Dresselhaus, M. S., & Dresselhaus, G. F. (2006) · Carbon · doi:10.1016/j.carbon.2006.04.032 · Cited by 75
Self-citationImproving electrochemical performance of polyaniline by introducing carbon aerogel as filler
Xu, F., Zheng, G., Wu, D., Liang, Y., Li, Z., & Fu, R. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/b917677b · Cited by 74
Self-citationRational Design and Synthesis of Porous Polymer Networks: Toward High Surface Area
Lu, W., Wei, Z., Yuan, D., Tian, J., Fordham, S., & Zhou, H.-C. “. (2014) · Chemistry of Materials · doi:10.1021/cm501922h · Cited by 74
Heterogeneous catalysis for fine chemicals production
Blaser, H. (2000) · Catalysis Today · doi:10.1016/s0920-5861(00)00332-1 · Cited by 74
İslamoğlu, T., Kim, T., Kahveci, Z., El‐Kadri, O. M., & El‐Kaderi, H. M. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b12247 · Cited by 73
Starch-derived carbon aerogels with high-performance for sorption of cationic dyes
Chang, X., Chen, D., & Jiao, X. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.018 · Cited by 72
Yang, X., Dong, B., Zhang, H., Ge, R., Gao, Y., & Zhang, H. (2015) · RSC Advances · doi:10.1039/c5ra16235a · Cited by 72
Chang, G., Shang, Z., Yu, T., & Yang, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08705h · Cited by 72
Wang, Y., He, C., Brouzgou, A., et al. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.037 · Cited by 68
All-thiophene-based conjugated porous organic polymers
Sun, C.-J., Wang, P., Wang, H., & Han, B. (2016) · Polymer Chemistry · doi:10.1039/c6py00725b · Cited by 67
Fabrication of novel powdery carbon aerogels with high surface areas for superior energy storage
Xu, F., Xu, J., Xu, H., Lu, Y., Yang, H., Tang, Z., Lü, Z., Fu, R., & Wu, D. (2016) · Energy storage materials · doi:10.1016/j.ensm.2016.11.002 · Cited by 64
Self-citationZhou, B., Hu, X. M., Zeng, G., Li, S., Wen, Z., & Chen, L. (2017) · ChemSusChem · doi:10.1002/cssc.201700749 · Cited by 64
Self-citationSynthesis of organic and carbon aerogels from phenol–furfural by two-step polymerization
Wu, D., & Fu, R. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2006.06.022 · Cited by 63
Self-citationBenzimidazole functionalized covalent triazine frameworks for CO 2 capture
Tao, L., Niu, F., Wang, C., Liu, J., Wang, T., & Wang, Q. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05107c · Cited by 62
Alkordi, M. H., Haikal, R. R., Hassan, Y. S., Emwas, A.-H. M., & Belmabkhout, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05297a · Cited by 61
Ghasemi, M., Khosroshahy, M. Z., Abbasabadi, A. B., Ghasemi, N., Javadian, H., & Fattahi, M. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.12.005 · Cited by 59
Şahan, S., Saçmacı, Ş., Kartal, Ş., Saçmacı, M., Şahin, U., & Ülgen, A. (2013) · Talanta · doi:10.1016/j.talanta.2013.12.030 · Cited by 56
Li, K., Tian, Z., Li, X., Xu, R., Xu, Y., Wang, L., Ma, H., Wang, B., & Lin, L. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201200101 · Cited by 55
Pal, P., & BANAT, F. A. (2014) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2014.02.015 · Cited by 55
Liang, Y., Liang, F., Wu, D., et al. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02290j · Cited by 53
Self-citationLiu, G., Li, N., Miller, S. J., Kim, D., Yi, S., Labreche, Y., & Koros, W. J. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201607055 · Cited by 51
Preparation of carbon aerogels from 5-methylresorcinol–formaldehyde gels
Pérez-Caballero, F., Peikolainen, A., Uibu, M., Kuusik, R., Volobujeva, O., & Koel, M. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.04.006 · Cited by 49
Li, Z., Wu, D., Liang, Y., Xu, F., & Fu, R. (2013) · Nanoscale · doi:10.1039/c3nr04236g · Cited by 48
Self-citationZhu, X., Chai, S., Tian, C., Fulvio, P. F., Han, K. S., Hagaman, E. W., Veith, G. M., Mahurin, S. M., Brown, S. S., Liu, H., et al. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201200793 · Cited by 47
Zhang, M., Perry, Z., Park, J., & Zhou, H.-C. “. (2013) · Polymer · doi:10.1016/j.polymer.2013.09.029 · Cited by 42
Gu, C., Huang, N., Xu, F., Gao, J., & Jiang, D. (2015) · Scientific Reports · doi:10.1038/srep08867 · Cited by 40
Self-citationLi, W., Liu, S., Pan, N., Zeng, F., Liu, Y., Zheng, M., & Liang, Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.002 · Cited by 40
Conjugated porous polymers as precursors for electrocatalysts and storage electrode materials
Bhosale, M. E., Illathvalappil, R., Kurungot, S., & Krishnamoorthy, K. (2015) · Chemical Communications · doi:10.1039/c5cc08148c · Cited by 38
Nanostructured porous polymer monolithic columns for capillary liquid chromatography of peptides
Vaast, A., Terryn, H. A., Švec, F., & Eeltink, S. (2014) · Journal of Chromatography A · doi:10.1016/j.chroma.2014.11.063 · Cited by 38
Mai, W., Zuo, Y., Li, C., Wu, J., Leng, K., Zhang, X., Liu, R., Fu, R., & Wu, D. (2017) · Polymer Chemistry · doi:10.1039/c7py01032j · Cited by 38
Self-citationLi, Z., Li, Z., Li, L., Li, C., Zhong, W., & Zhang, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03730 · Cited by 37
A facile approach for tailoring carbon frameworks from microporous to nonporous for nanocarbons
Xu, F., Lai, Y., Fu, R., & Wu, D. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta01694c · Cited by 35
Self-citationRequirements of organic gels for a successful ambient pressure drying preparation of carbon aerogels
Wu, D., & Fu, R. (2007) · Journal of Porous Materials · doi:10.1007/s10934-006-9048-4 · Cited by 34
Self-citationChang, G., Yang, L., Yang, J., Huang, Y., Cao, K., Ma, J., & Wang, D. (2016) · Polymer Chemistry · doi:10.1039/c6py01154c · Cited by 33
High Rate Performing in Situ Nitrogen Enriched Spherical Carbon Particles for Li/Na-Ion Cells
Vadivel, S., Gopi, S., Rajagopal, V., Kathiresan, M., Suryanarayanan, V., Velayutham, D., & Gopukumar, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10882 · Cited by 33
Novel hollow and yolk–shell structured periodic mesoporous polymer nanoparticles
Liang, Y., Mai, W., Huang, J., Huang, Z., Fu, R., Zhang, M., Wu, D., & Matyjaszewski, K. A. (2015) · Chemical Communications · doi:10.1039/c5cc09028h · Cited by 29
Self-citationHussain, M. W., Bandyopadhyay, S., & Patra, A. (2017) · Chemical Communications · doi:10.1039/c7cc05097f · Cited by 27
Hu, Z., Cui, Y., Liu, S., Yuan, Y., & Gao, H. (2011) · Environmental Science and Pollution Research · doi:10.1007/s11356-011-0651-9 · Cited by 22
Cited by
Li, C., Li, Q., Kaneti, Y. V., Hou, D., Yamauchi, Y., & Mai, Y. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00021c · Cited by 513
Multiple Roles of Dissolved Organic Matter in Advanced Oxidation Processes
Yang, X., Rosario-Ortiz, F. L., Lei, Y., Pan, Y., Lei, X., & Westerhoff, P. (2022) · Environmental Science & Technology · doi:10.1021/acs.est.2c01017 · Cited by 459
Recent Progress of the Preparation and Application of Electrospun Porous Nanofibers
Wang, P., Lv, H., Cao, X., Liu, Y., & Yu, D.-G. (2023) · Polymers · doi:10.3390/polym15040921 · Cited by 140
Wang, X., Yan, N., Xie, M., Liu, P., Bai, P., Su, H., Wang, B., Wang, Y., Li, L., Cheng, T., et al. (2021) · Chemical Science · doi:10.1039/d1sc00619c · Cited by 90
Metadata
- Authors
- Wu, J., Xu, F., Li, S., Ma, P., Zhang, X., Liu, Q., Fu, R., & Wu, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-10-22
- Volume
- 31
- Issue
- 4
- Pages
- e1802922-e1802922
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2896503173
- Cited by
- 555
- References
- 362
- FWCI
- 18.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.