The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
ZnO Nanosheets Abundant in Oxygen Vacancies Derived from Metal‐Organic Frameworks for ppb‐Level Gas Sensing
Abstract
Surmounting the inhomogeniety issue of gas sensors and realizing their reproducible ppb‐level gas sensing are highly desirable for widespread deployments of sensors to build networks in applications of industrial safety and indoor/outdoor air quality monitoring. Herein, a strategy is proposed to substantially improve the surface homogeneity of sensing materials and gas sensing performance via chip‐level pyrolysis of as‐grown ZIF‐L (ZIF stands for zeolitic imidazolate framework) films to porous and hierarchical zinc oxide (ZnO) nanosheets. A novel approach to generate adjustable oxygen vacancies is demonstrated, through which the electronic structure of sensing materials can be fine‐tuned. Their presence is thoroughly verified by various techniques. The sensing results demonstrate that the resultant oxygen vacancy‐abundant ZnO nanosheets exhibit significantly enhanced sensitivity and shortened response time toward ppb‐level carbon monoxide (CO) and volatile organic compounds encompassing 1,3‐butadiene, toluene, and tetrachloroethylene, which can be ascribed to several reasons including unpaired electrons, consequent bandgap narrowing, increased specific surface area, and hierarchical micro–mesoporous structures. This facile approach sheds light on the rational design of sensing materials via defect engineering, and can facilitate the mass production, commercialization, and large‐scale deployments of sensors with controllable morphology and superior sensing performance targeted for ultratrace gas detection.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Scherrer equation versus the 'Debye-Scherrer equation'
Holzwarth, U., & Gibson, N. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.145 · Cited by 3,407
Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview
Kim, H.-J., & Lee, J.-H. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.11.005 · Cited by 2,258
Xu, L., Jiang, Q., Xiao, Z., Li, X., Huo, J., Wang, S., & Dai, L. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201600687 · Cited by 2,073
Zinc Oxide Nanostructures for NO2 Gas–Sensor Applications: A Review
Kumar, R., Al-Dossary, O., Kumar, G., & Umar, A. (2015) · Nano-Micro Letters · doi:10.1007/s40820-014-0023-3 · Cited by 900
Oxygen Vacancies in ZnO Nanosheets Enhance CO2 Electrochemical Reduction to CO
Geng, Z., Kong, X., Chen, W., Su, H., Liu, Y., Cai, F., Wang, G., & Zeng, J. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711255 · Cited by 771
Joshi, N., Hayasaka, T., Liu, Y., Liu, H., Oliveira, O. N., & Lin, L. (2018) · Microchimica Acta · doi:10.1007/s00604-018-2750-5 · Cited by 753
Self-citationTuning defects in oxides at room temperature by lithium reduction
Ou, G., Xu, Y., Wen, B., Lin, R., Ge, B., Tang, Y., Liang, Y., Yang, C., Huang, K., Zu, D., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03765-0 · Cited by 722
Ansari, S. A., Khan, P. D. M. M., Kalathil, S., Nisar, A., Lee, J., & Cho, M. H. (2013) · Nanoscale · doi:10.1039/c3nr02678g · Cited by 636
Metal oxide composites in conductometric gas sensors: Achievements and challenges
Korotcenkov, G., & Cho, B. K. (2017) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.12.117 · Cited by 547
Yang, S. J., Nam, S., Kim, T., Im, J. H., Jung, H., Kang, J. H., Wi, S., Park, B., & Park, C. R. (2013) · Journal of the American Chemical Society · doi:10.1021/ja311550t · Cited by 518
Cited by
Advances in Noble Metal-Decorated Metal Oxide Nanomaterials for Chemiresistive Gas Sensors: Overview
Zhu, L.-Y., Ou, L.-X., Mao, L.-W., Wu, X.-Y., Liu, Y.-P., & Lu, H.-L. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01047-z · Cited by 553
Insight into the design of defect electrocatalysts: From electronic structure to adsorption energy
Xie, C., Yan, D., Chen, W., Zou, Y., Chen, R., Zang, S., Wang, Y., Yao, X., & Wang, S. (2019) · Materials Today · doi:10.1016/j.mattod.2019.05.021 · Cited by 490
Self-citationSelectivity in Chemiresistive Gas Sensors: Strategies and Challenges
Bulemo, P. M., Kim, D.-H., Shin, H., Cho, H.-J., Koo, W.-T., Choi, S.-J., Park, C., Ahn, J., Güntner, A. T., Penner, R. M., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00592 · Cited by 418
MOF‐Based Chemiresistive Gas Sensors: Toward New Functionalities
Jo, Y., Jo, Y. K., Lee, J., Jang, H. W., Hwang, I., & Yoo, D. J. (2023) · Advanced Materials · doi:10.1002/adma.202206842 · Cited by 410
Xu, Y., Zheng, L., Yang, C., Zheng, W., Liu, X., & Zhang, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04398 · Cited by 377
Porous materials as effective chemiresistive gas sensors
Sharma, A., Eadi, S. B., Noothalapati, H., Otyepka, M., Lee, H.-D., & Jayaramulu, K. (2024) · Chemical Society Reviews · doi:10.1039/d2cs00761d · Cited by 352
Zhou, T., & Zhang, T. (2021) · Small Methods · doi:10.1002/smtd.202100515 · Cited by 350
Defect Engineering in Nanocatalysts: From Design and Synthesis to Applications
Muhammad, P., Zada, A., Rashid, J., Hanif, S., Gao, Y., Li, C., Li, Y., Fan, K., & Wang, Y. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314686 · Cited by 350
Self-citationDefect engineering of ZnO: Review on oxygen and zinc vacancies
Gurylev, V., & Perng, T. P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.03.031 · Cited by 336
Ye, F., Zhang, S., Cheng, Q., Long, Y., Liu, D., Paul, R., Fang, Y., Su, Y., Qu, L., Dai, L., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-37679-3 · Cited by 315
Platinum single atoms on tin oxide ultrathin films for extremely sensitive gas detection
Xu, Y., Zheng, W., Liu, X., Zhang, L., Zheng, L., Yang, C., Pinna, N., & Zhang, J. (2020) · Materials Horizons · doi:10.1039/d0mh00495b · Cited by 284
Metal–organic frameworks and their derivatives for electrically-transduced gas sensors
Yao, M.-S., Li, W.-H., & Xu, G. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213479 · Cited by 264
Li, Z., Liu, X., Zhou, M., Zhang, S., Cao, S., Lei, G., Lou, C., & Zhang, J. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125757 · Cited by 245
Hydrogel-Based Gas Sensors for NO 2 and NH 3
Zhi, H., Gao, J., & Feng, L. (2020) · ACS Sensors · doi:10.1021/acssensors.9b02383 · Cited by 108
A Colorimetric Artificial Olfactory System for Airborne Improvised Explosive Identification
Wang, G., Li, Y., Cai, Z., & Dou, X. (2020) · Advanced Materials · doi:10.1002/adma.201907043 · Cited by 98
Liu, W., Zheng, Y., Wang, Z., Wang, Z., Yang, J., Chen, M., Qi, M., Ur Rehman, S., Shum, P. P., Zhu, L., et al. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202001978 · Cited by 77
A simple synthesis of ZnO:Co2O3 nanocomposites by pulsed laser irradiation in liquid
Kanakkillam, S. S., Krishnan, B., Avellaneda, D. A., & Shaji, S. (2020) · Materials Today: Proceedings · doi:10.1016/j.matpr.2020.08.533 · Cited by 10
Metadata
- Authors
- Yuan, H., Aljneibi, S. A. A. A., Yuan, J., Wang, Y., Liu, H., Fang, J., Tang, C., Yan, X., Cai, H., Gu, Y., Pennycook, S. J., Tao, J., & Zhao, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-01-13
- Volume
- 31
- Issue
- 11
- Pages
- e1807161-e1807161
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2910087414
- Cited by
- 545
- References
- 16
- FWCI
- 23.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.