The DOI matches its Crossref record; 301 of the 301 references it cites were found in a registry or an index.
From Shape to Function: The Next Step in Bioprinting
Open accessAbstract
In 2013, the “biofabrication window” was introduced to reflect the processing challenge for the fields of biofabrication and bioprinting. At that time, the lack of printable materials that could serve as cell‐laden bioinks, as well as the limitations of printing and assembly methods, presented a major constraint. However, recent developments have now resulted in the availability of a plethora of bioinks, new printing approaches, and the technological advancement of established techniques. Nevertheless, it remains largely unknown which materials and technical parameters are essential for the fabrication of intrinsically hierarchical cell–material constructs that truly mimic biologically functional tissue. In order to achieve this, it is urged that the field now shift its focus from materials and technologies toward the biological development of the resulting constructs. Therefore, herein, the recent material and technological advances since the introduction of the biofabrication window are briefly summarized, i.e., approaches how to generate shape, to then focus the discussion on how to acquire the biological function within this context. In particular, a vision of how biological function can evolve from the possibility to determine shape is outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–301 of 301
Yeo, M., Lee, J.-S., Chun, W., & Kim, G. H. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01764 · Cited by 159
Jiang, T., James, R., Kumbar, S. G., & Laurencin, C. T. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-396983-5.00005-3 · Cited by 159
de Ruijter, M., Ribeiro, A., Dokter, I., Castilho, M. D., & Malda, J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800418 · Cited by 159
Self-citationLode, A., Krujatz, F., Brüggemeier, S., Quade, M., Schütz, K., Knaack, S., Weber, J., Bley, T., & Gelinsky, M. (2015) · Engineering in Life Sciences · doi:10.1002/elsc.201400205 · Cited by 158
Jin, Y., Chai, W., & Huang, Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.144 · Cited by 158
Bioprinted 3D vascularized tissue model for drug toxicity analysis
Massa, S., Sakr, M. A., Seo, J., Bandaru, P., Arneri, A., Bersini, S., Zare-Eelanjegh, E., Jalilian, E., Cha, B.-H., Antona, S., et al. (2017) · Biomicrofluidics · doi:10.1063/1.4994708 · Cited by 158
Stichler, S., Bock, T. A., Paxton, N. C., Bertlein, S., Levato, R., Schill, V., Smolan, W., Malda, J., Teßmar, J., Blunk, T., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8cb7 · Cited by 155
Self-citationDubbin, K., Hori, Y., Lewis, K. K., & Heilshorn, S. C. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600636 · Cited by 153
Luo, Y., Lode, A., & Gelinsky, M. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200303 · Cited by 147
3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBD-BMP2-collagen microfibers
Du, M., Chen, B., Meng, Q., Liu, S., Zheng, X., Zhang, C., Wang, H., Li, H., Wang, N., & Dai, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044104 · Cited by 145
Ren, X., Wang, F., Chen, C., Gong, X., Yin, L., & Yang, L. (2016) · BMC Musculoskeletal Disorders · doi:10.1186/s12891-016-1130-8 · Cited by 143
Bose, S., Tarafder, S., & Bandyopadhyay, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1646-y · Cited by 142
Jiang, T., Munguia-López, J. G., Flores-Torres, S., Grant, J., Vijayakumar, S., León‐Rodríguez, A. D., & Kinsella, J. M. (2017) · Scientific Reports · doi:10.1038/s41598-017-04691-9 · Cited by 141
Bioprinting of a functional vascularized mouse thyroid gland construct
Bulanova, E. A., Koudan, E. V., Degosserie, J., Heymans, C., Pereira, F. D. A. S., Parfenov, V. A., Sun, Y. N., Wang, Q., Akhmedova, S. A., Sviridova, I. K., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7fdd · Cited by 139
Kim, G., Ahn, S., Kim, Y.-Y., Cho, Y., & Chun, W. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03452e · Cited by 137
Additive manufacturing of photo-crosslinked gelatin scaffolds for adipose tissue engineering
Tytgat, L., Damme, L. V., Hoorick, J. V., Declercq, H., Hugo Thienpont, A., Ottevaere, H., Blondeel, P. N., Dubruel, P., & Vlierberghe, S. V. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.062 · Cited by 135
3D cell bioprinting of self-assembling peptide-based hydrogels
Raphael, B., Khalil, T., Workman, V. L., Smith, A. M., Brown, C., Streuli, C. H., Saiani, A., & Domingos, M. A. N. (2017) · Materials Letters · doi:10.1016/j.matlet.2016.12.127 · Cited by 133
Suspended Manufacture of Biological Structures
Moxon, S. R., Cooke, M. E., Cox, S. C., Snow, M., Jeys, L. M., Jones, S. W., Smith, A. M., & Grover, L. M. (2017) · Advanced Materials · doi:10.1002/adma.201605594 · Cited by 133
Eichholz, K. F., & Hoey, D. A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.048 · Cited by 133
Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo
Apelgren, P., Amoroso, M., Lindahl, A. H., Brantsing, C., Rotter, N., Gatenholm, P., & Kölby, L. (2017) · PLoS ONE · doi:10.1371/journal.pone.0189428 · Cited by 131
Ma, Y., Ji, Y., Huang, G., Ling, K., Zhang, X., & Xu, F. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044105 · Cited by 130
Chen, Y., Shen, Y., Ho, C., Yu, J. Y., Wu, Y.-H. A., Wang, K., Shih, C., & Shie, M. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.06.005 · Cited by 129
Attalla, R., Ling, C. S. N., & Selvaganapathy, P. R. (2016) · Biomedical Microdevices · doi:10.1007/s10544-016-0042-6 · Cited by 126
Mouser, V. H. M., Abbadessa, A., Levato, R., Hennink, W. E., Vermonden, T., Gawlitta, D., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6265 · Cited by 126
Self-citationDirect writing of chitosan scaffolds using a robotic system
Li, G., Feng, W., Hutmacher, D. W., Wong, Y. S., Loh, H. T., & Fuh, J. Y. H. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510589458 · Cited by 125
Cunniffe, G. M., Gonzalez‐Fernandez, T., Daly, A. C., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0498 · Cited by 125
Zhao, H., Chen, Y., Shao, L., Xie, M., Nie, J., Qiu, J., Zhao, P., Ramezani, H., Fu, J., Ouyang, H., et al. (2018) · Small · doi:10.1002/smll.201802630 · Cited by 124
Pore-forming bioinks to enable spatio-temporally defined gene delivery in bioprinted tissues
Gonzalez‐Fernandez, T., Rathan, S., Hobbs, C. J., et al. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.03.006 · Cited by 122
Influence of 3D printed porous architecture on mesenchymal stem cell enrichment and differentiation
Ferlin, K. M., Prendergast, M. E., Miller, M. L., Kaplan, D. S., & Fisher, J. P. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.007 · Cited by 120
Lenas, P., Moos, M. C., & Luyten, F. P. (2009) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2009.0461 · Cited by 116
Highly Reactive Thiol‐Norbornene Photo‐Click Hydrogels: Toward Improved Processability
Hoorick, J. V., Gruber, P., Marković, M., Rollot, M., Graulus, G., Vagenende, M., Tromayer, M., Erps, J. V., Hugo Thienpont, A., Martins, J. C., et al. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201800181 · Cited by 113
You, F., Chen, D., Cooper, D. M. L., Chang, T., & Eames, B. F. (2018) · Biofabrication · doi:10.1088/1758-5090/aaf44a · Cited by 113
3D bioprinting for reconstructive surgery: Principles, applications and challenges
Jessop, Z. M., Al‐Sabah, A., Gardiner, M. D., Combellack, E. J., Hawkins, K. M., & Whitaker, I. S. (2017) · Journal of Plastic Reconstructive & Aesthetic Surgery · doi:10.1016/j.bjps.2017.06.001 · Cited by 112
Ding, H., & Chang, R. C. (2018) · Applied Sciences · doi:10.3390/app8030403 · Cited by 112
Wang, X., Li, X., Dai, X., Zhang, X., Zhang, J., Xu, T., & Lan, Q. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.07.042 · Cited by 110
Hafeez, S., Ooi, H. W., Morgan, F. L. C., Mota, C., Dettin, M., van Blitterswijk, C., Moroni, L., & Baker, M. B. (2018) · Gels · doi:10.3390/gels4040085 · Cited by 109
Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication
Stichler, S., Jüngst, T., Schamel, M., Zilkowski, I., Kuhlmann, M., Bock, T. A., Blunk, T., Teßmar, J., & Gröll, J. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1633-3 · Cited by 108
Self-citationLeveraging advances in biology to design biomaterials.
Darnell, M. C., & Mooney, D. J. (2017) · Nature Materials · doi:10.1038/nmat4991 · Cited by 108
Quantitative characterization of 3D bioprinted structural elements under cell generated forces
Morley, C. D., Ellison, S. T., Bhattacharjee, T., O’Bryan, C. S., Zhang, Y., Smith, K. F., Kabb, C. P., Sebastian, M., Moore, G. L., Schulze, K. D., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10919-1 · Cited by 107
Hydrogel-based reinforcement of 3D bioprinted constructs
Melchels, F. P. W., Blokzijl, M. M., Levato, R., Peiffer, Q. C., de Ruijter, M., Hennink, W. E., Vermonden, T., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035004 · Cited by 104
Self-citationBiofunctionalized aligned microgels provide 3D cell guidance to mimic complex tissue matrices
Rose, J. C., Gehlen, D. B., Haraszti, T., Köhler, J., Licht, C. J., & Laporte, L. D. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.02.001 · Cited by 104
Ahlfeld, T., Doberenz, F., Kilian, D., Vater, C., Korn, P., Lauer, G., Lode, A., & Gelinsky, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aad36d · Cited by 103
Optimization of Silicone 3D Printing with Hierarchical Machine Learning
Menon, A., Póczos, B., Feinberg, A. W., & Washburn, N. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0088 · Cited by 103
A pore way to heal and regenerate: 21st century thinking on biocompatibility
Ratner, B. D. (2016) · Regenerative Biomaterials · doi:10.1093/rb/rbw006 · Cited by 101
Current status of three-dimensional printing inks for soft tissue regeneration
Kim, J. E., Kim, S. H., & Jung, Y. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-0125-8 · Cited by 101
Luca, A. D., Lorenzo‐Moldero, I., Mota, C., Lepedda, A. J., Auhl, D. W., van Blitterswijk, C., & Moroni, L. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600083 · Cited by 100
Henriksson, I., Gatenholm, P., & Hägg, D. A. (2017) · Biofabrication · doi:10.1088/1758-5090/aa5c1c · Cited by 100
Schneeberger, K., Spee, B., Costa, P., Sachs, N., Clevers, H., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6121 · Cited by 100
Self-citationEngineering muscle cell alignment through 3D bioprinting
Mozetic, P., Giannitelli, S. M., Gori, M., Trombetta, M., & Rainer, A. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36117 · Cited by 100
van der Valk, D. C., van der Ven, C. F. T., Blaser, M. C., Grolman, J. M., Wu, P.-J., Fenton, O. S., Lee, L. H., Tibbitt, M. W., Andresen, J. L., Wen, J., et al. (2018) · Nanomaterials · doi:10.3390/nano8050296 · Cited by 100
Hong, S., Sycks, D. G., Chan, H. F., Lin, S., López, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201570182 · Cited by 99
Multi-Objective Optimization Design through Machine Learning for Drop-on-Demand Bioprinting
Shi, J., Song, J., Song, B., et al. (2019) · Engineering · doi:10.1016/j.eng.2018.12.009 · Cited by 98
Hierarchical Design of Tissue Regenerative Constructs
Rose, J. C., & Laporte, L. D. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701067 · Cited by 97
Bioprinted osteon-like scaffolds enhance in vivo neovascularization
Piard, C., Baker, H. B., Kamalitdinov, T. B., & Fisher, J. P. (2019) · Biofabrication · doi:10.1088/1758-5090/ab078a · Cited by 97
Sakai, S., Ohi, H., Hotta, T., Kamei, H., & Taya, M. (2017) · Biopolymers · doi:10.1002/bip.23080 · Cited by 92
Structuring of Hydrogels across Multiple Length Scales for Biomedical Applications
Cooke, M. E., Jones, S. W., ter Horst, B., Moiemen, N. S., Snow, M., Chouhan, G., Hill, L. J., Esmaeli, M., Moakes, R. J. A., Holton, J., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705013 · Cited by 91
Attalla, R., Puersten, E., Jain, N., & Selvaganapathy, P. R. (2018) · Biofabrication · doi:10.1088/1758-5090/aaf7c7 · Cited by 89
Pre-set extrusion bioprinting for multiscale heterogeneous tissue structure fabrication
Kang, D., Ahn, G., Kim, D., Kang, H., Yun, S., Yun, W., Shim, J., & Jin, S. (2018) · Biofabrication · doi:10.1088/1758-5090/aac70b · Cited by 86
Lindberg, G. C. J., Lim, K. S., Farrugia, B. L., Hooper, G. J., & Woodfield, T. B. F. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201700158 · Cited by 84
Out‐of‐Plane 3D‐Printed Microfibers Improve the Shear Properties of Hydrogel Composites
de Ruijter, M., Hrynevich, A., Haigh, J. N., Hochleitner, G., Castilho, M. D., Gröll, J., Malda, J., & Dalton, P. D. (2017) · Small · doi:10.1002/smll.201702773 · Cited by 84
Self-citationDahle, J., Kvam, E., & Stokke, T. (2005) · Journal of Carcinogenesis · doi:10.1186/1477-3163-4-11 · Cited by 82
Additive Manufacturing of Vascular Grafts and Vascularized Tissue Constructs
Elomaa, L., & Yang, Y. (2016) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0348 · Cited by 82
Kuss, M. A., Harms, R., Wu, S., Wang, Y., Untrauer, J. B., Carlson, M. A., & Duan, B. (2017) · RSC Advances · doi:10.1039/c7ra04372d · Cited by 82
Ruskowitz, E. R., & DeForest, C. A. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00177 · Cited by 82
Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration
Peak, C. W., Singh, K. A., Adlouni, M., Chen, J. W., & Gaharwar, A. K. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801553 · Cited by 81
Liu, N., Huang, S., Yao, B., Xie, J., Wu, X., & Fu, X. (2016) · Scientific Reports · doi:10.1038/srep34410 · Cited by 79
Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing
Serex, L., Bertsch, A., & Renaud, P. (2018) · Micromachines · doi:10.3390/mi9020086 · Cited by 78
ECM Based Bioink for Tissue Mimetic 3D Bioprinting
Nam, S. Y., & Park, S. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0445-3_20 · Cited by 78
Bioprinting of 3D Tissue Models Using Decellularized Extracellular Matrix Bioink
Pati, F., & Cho, D. (2017) · Methods in molecular biology · doi:10.1007/978-1-4939-7021-6_27 · Cited by 75
Bioprinting synthetic self-assembling peptide hydrogels for biomedical applications
Loo, Y., & Hauser, C. A. E. (2015) · Biomedical Materials · doi:10.1088/1748-6041/11/1/014103 · Cited by 72
Kim, K. W., Lee, S. J., Park, S. H., & Kim, J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800398 · Cited by 71
Neal, R. A., Jean, A., Park, H., Wu, P. B., Hsiao, J. C., Engelmayr, G. C., Langer, R., & Freed, L. E. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2012.0330 · Cited by 69
The applicability of furfuryl‐gelatin as a novel bioink for tissue engineering applications
Kumar, S. A., Allen, S. C., Tasnim, N., Akter, T., Park, S., Kumar, A., Chattopadhyay, M., Ito, Y., Suggs, L. J., & Joddar, B. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34123 · Cited by 68
Heterogeneous micromechanical properties of the extracellular matrix in healthy and infarcted hearts
Andreu, I., Luque, T., Sancho, A., Pelacho, B., Iglesias‐García, O., Melo, E., Farré, R., Prósper, F., Elizalde, M. R., & Navajas, D. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.03.034 · Cited by 66
Müller, M., Becher, J., Schnabelrauch, M., & Zenobi‐Wong, M. (2013) · Journal of Visualized Experiments · doi:10.3791/50632-v · Cited by 66
McMaster, R., Hoefner, C., Hrynevich, A., Blum, C., Wiesner, M., Wittmann, K., Dargaville, T. R., Bauer‐Kreisel, P., Gröll, J., Dalton, P. D., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801326 · Cited by 65
Self-citationBioprinting Using Mechanically Robust Core–Shell Cell‐Laden Hydrogel Strands
Mistry, P., Aied, A., Alexander, M. R., Shakesheff, K. M., Bennett, A. J., & Yang, J. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201600472 · Cited by 62
Toward Customized Extracellular Niche Engineering: Progress in Cell‐Entrapment Technologies
Thomas, D., O'Brien, T., & Pandit, A. (2018) · Advances in Materials · doi:10.1002/adma.201703948 · Cited by 60
Bacterial Nanobionics via 3D Printing
Joshi, S., Cook, E., & Mannoor, M. S. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b02642 · Cited by 56
Dalby, M. J., Hart, A., & Yarwood, S. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.030 · Cited by 55
Celikkin, N., Padial, J. S., Costantini, M., Hendrikse, H. C., Cohn, R., Wilson, C. J., Rowan, A. E., & Święszkowski, W. (2018) · Polymers · doi:10.3390/polym10050555 · Cited by 54
Santiago, G. T., Álvarez, M. M., Samandari, M., Prakash, G., Chandrabhatla, G., Rellstab‐Sánchez, P. I., Byambaa, B., Abadi, P. P. S. S., Mandla, S., Avery, R. K., et al. (2018) · Materials Horizons · doi:10.1039/c8mh00344k · Cited by 53
Pharmacologically active microcarriers influence VEGF ‐A effects on mesenchymal stem cell survival
Penna, C. R. R., Perrelli, M.-G., Karam, J., Angotti, C., Muscari, C., Montero‐Menei, C. N., & Pagliaro, P. (2013) · Journal of Cellular and Molecular Medicine · doi:10.1111/j.1582-4934.2012.01662.x · Cited by 51
Echalier, C., Levato, R., Mateos‐Timoneda, M. A., Castaño, Ó., Dejean, S., Garric, X., Pinese, C., Noël, D., Engel, E., Martínez, J., et al. (2017) · RSC Advances · doi:10.1039/c6ra28540f · Cited by 51
Self-citationDevelopment and characterization of a photocurable alginate bioink for three-dimensional bioprinting
Mishbak, H., Cooper, G., & Bártolo, P. (2019) · International Journal of Bioprinting · doi:10.18063/ijb.v5i2.189 · Cited by 51
Quantifying the kinetics and morphological changes of the fusion of spheroid building blocks
Susienka, M. J., Wilks, B. T., & Morgan, J. R. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045003 · Cited by 50
Levato, R., Planell, J. A., Mateos‐Timoneda, M. A., & Engel, E. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.02.008 · Cited by 48
Self-citationIzadifar, M., Babyn, P., Kelly, M., Chapman, D., & Chen, D. (2017) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2017.0222 · Cited by 46
Engineering of a complex bone tissue model with endothelialised channels and capillary-like networks
BJ, I., Lim, K. S., Chang, Y., Soliman, B. G., Pennings, I., Melchels, F. P. W., Woodfield, T. B. F., Rosenberg, A. J. W. P., Malda, J., & Gawlitta, D. (2018) · European Cells and Materials · doi:10.22203/ecm.v035a23 · Cited by 44
Self-citationUse of Hyaluronan‐Derived Hydrogels for Three‐Dimensional Cell Culture and Tumor Xenografts
Serban, M. A., Scott, A., & Prestwich, G. D. (2008) · Current Protocols in Cell Biology · doi:10.1002/0471143030.cb1014s40 · Cited by 43
From intricate to integrated: Biofabrication of articulating joints
Groen, W. M. G. A. C., Diloksumpan, P., van Weeren, P. R., Levato, R., & Malda, J. (2017) · Journal of Orthopaedic Research® · doi:10.1002/jor.23602 · Cited by 42
Self-citationControlling the Cell Adhesion Property of Silk Films by Graft Polymerization
Dhyani, V., & Singh, N. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4060595 · Cited by 35
Holmes, A. M., Charlton, A., Derby, B., Ewart, L. C., Scott, A., & Shu, W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7bbd · Cited by 34
Park, J., Lee, K., Kim, H., Park, S., Wijesinghe, R. E., Lee, J., Han, S., Lee, S., Kim, P., Cho, D., et al. (2019) · Journal of Biophotonics · doi:10.1002/jbio.201900098 · Cited by 32
Preparation of Biodegradable Polylactide Microparticles via a Biocompatible Procedure
Levato, R., Mateos‐Timoneda, M. A., & Planell, J. A. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201100383 · Cited by 26
Self-citationZhang, L., Chen, S., Liang, R., Chen, Y., Li, S., Li, S., Sun, Z., Wang, Y., Li, G., Ming, A., et al. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36507 · Cited by 24
Fluid Gels: a New Feedstock for High Viscosity Jetting
Holland, S., Tuck, C. J., & Foster, T. (2018) · Food Biophysics · doi:10.1007/s11483-018-9523-x · Cited by 20
Another dimension to the importance of the extracellular matrix in fibrosis
Rittié, L. (2015) · Journal of Cell Communication and Signaling · doi:10.1007/s12079-015-0282-x · Cited by 13
Designed Surface Topographies Control ICAM-1 Expression in Tonsil-Derived Human Stromal Cells
Vasilevich, A. S., Mourcin, F., Mentink, A., Hulshof, F. F. B., Beijer, N. R. M., Zhao, Y., Levers, M., Papenburg, B. J., Singh, S., Carpenter, A. E., et al. (2018) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2018.00087 · Cited by 11
Organs by design: can bioprinting meet self-organization?
Martín, I., Malda, J., & Rivron, N. C. (2019) · Current Opinion in Organ Transplantation · doi:10.1097/mot.0000000000000679 · Cited by 10
Self-citationHow some labs put more bio into biomaterials
Marx, V. (2019) · Nature Methods · doi:10.1038/s41592-019-0399-6 · Cited by 9
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Self-citationFundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Self-citationAdvanced hydrogels for the repair of cartilage defects and regeneration
Wei, W., Ma, Y., Yao, X., Zhou, W., Wang, X., Li, C., Lin, J., He, Q., Leptihn, S., & Ouyang, H. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.09.030 · Cited by 357
Progress and Opportunities for Machine Learning in Materials and Processes of Additive Manufacturing
Ng, W. L., Goh, G. L., Goh, G. D., Ten, J. S. J., & Yeong, W. Y. (2024) · Advanced Materials · doi:10.1002/adma.202310006 · Cited by 339
Metadata
- Authors
- Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-02-11
- Volume
- 32
- Issue
- 12
- Pages
- e1906423-e1906423
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3006231048
- Cited by
- 476
- References
- 301
- FWCI
- 21.01
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.