The DOI matches its Crossref record; 301 of the 301 references it cites were found in a registry or an index.
From Shape to Function: The Next Step in Bioprinting
Open accessAbstract
In 2013, the “biofabrication window” was introduced to reflect the processing challenge for the fields of biofabrication and bioprinting. At that time, the lack of printable materials that could serve as cell‐laden bioinks, as well as the limitations of printing and assembly methods, presented a major constraint. However, recent developments have now resulted in the availability of a plethora of bioinks, new printing approaches, and the technological advancement of established techniques. Nevertheless, it remains largely unknown which materials and technical parameters are essential for the fabrication of intrinsically hierarchical cell–material constructs that truly mimic biologically functional tissue. In order to achieve this, it is urged that the field now shift its focus from materials and technologies toward the biological development of the resulting constructs. Therefore, herein, the recent material and technological advances since the introduction of the biofabrication window are briefly summarized, i.e., approaches how to generate shape, to then focus the discussion on how to acquire the biological function within this context. In particular, a vision of how biological function can evolve from the possibility to determine shape is outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Molecular Mechanisms of Stress-Responsive Changes in Collagen and Elastin Networks in Skin
Aziz, J., Shezali, H., Radzi, Z., Yahya, N. A., Abu Kassim, N. H., Czernuszka, J., & Rahman, M. T. (2016) · Skin Pharmacology and Physiology · doi:10.1159/000447017 · Cited by 7,323
Collagen Structure and Stability
Shoulders, M. D., & Raines, R. T. (2009) · Annual Review of Biochemistry · doi:10.1146/annurev.biochem.77.032207.120833 · Cited by 3,923
Modeling Development and Disease with Organoids
Clevers, H. (2016) · Cell · doi:10.1016/j.cell.2016.05.082 · Cited by 3,196
Chitosan Chemistry and Pharmaceutical Perspectives
Kumar, M. N. V. R., Muzzarelli, R. A. A., Muzzarelli, C., Sashiwa, H., & Domb, A. J. (2004) · Chemical Reviews · doi:10.1021/cr030441b · Cited by 2,938
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Matrigel: A complex protein mixture required for optimal growth of cell culture
Hughes, C. S., Postovit, L. M., & Lajoie, G. A. (2010) · PROTEOMICS · doi:10.1002/pmic.200900758 · Cited by 1,534
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Designer matrices for intestinal stem cell and organoid culture
Gjorevski, N., Sachs, N., Manfrin, A., Giger, S., Bragina, M. E., Ordóñez-Morán, P., Clevers, H., & Lutolf, M. P. (2016) · Nature · doi:10.1038/nature20168 · Cited by 1,426
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
The Uterine Spiral Arteries In Human Pregnancy: Facts and Controversies
Pijnenborg, R., Vercruysse, L., & Hanssens, M. (2006) · Placenta · doi:10.1016/j.placenta.2005.12.006 · Cited by 1,205
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T. (2019) · Advanced Science · doi:10.1002/advs.201900344 · Cited by 1,042
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Skylar-Scott, M. A., Uzel, S. G. M., Nam, L. L., Ahrens, J. H., Truby, R. L., Damaraju, S., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aaw2459 · Cited by 943
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Hydrodynamic Focusing on a Silicon Chip: Mixing Nanoliters in Microseconds
Knight, J. B., Vishwanath, A., Brody, J. P., & Austin, R. H. (1998) · Physical Review Letters · doi:10.1103/physrevlett.80.3863 · Cited by 887
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Metre-long cell-laden microfibres exhibit tissue morphologies and functions
Onoe, H., Okitsu, T., Itou, A., Kato-Negishi, M., Gojo, R., Kiriya, D., Sato, K., Miura, S., Iwanaga, S., Kuribayashi-Shigetomi, K., et al. (2013) · Nature Materials · doi:10.1038/nmat3606 · Cited by 860
Small airway-on-a-chip enables analysis of human lung inflammation and drug responses in vitro
Benam, K. H., Villenave, R., Lucchesi, C., Varone, A., Hubeau, C., Lee, H.-H., Alves, S. E., Salmon, M., Ferrante, T. C., Weaver, J. C., et al. (2016) · Nature Methods · doi:10.1038/nmeth.3697 · Cited by 816
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
Self-citationSchuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Self-citationSilk fibroin as biomaterial for bone tissue engineering
Melke, J., Midha, S., Ghosh, S., Ito, K., & Hofmann, S. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.09.005 · Cited by 789
A decade of progress in tissue engineering
Khademhosseini, A., & Langer, R. (2016) · Nature Protocols · doi:10.1038/nprot.2016.123 · Cited by 747
Labernadie, A., Kato, T., Brugués, A., Serra-Picamal, X., Derzsi, S., Arwert, E., Weston, A., González-Tarragó, V., Elosegui-Artola, A., Albertazzi, L., et al. (2017) · Nature Cell Biology · doi:10.1038/ncb3478 · Cited by 747
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Self-citationReinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Self-citationBiomimetic 3D-printed scaffolds for spinal cord injury repair
Koffler, J., Zhu, W., Qu, X., Platoshyn, O., Dulin, J. N., Brock, J., Graham, L., Lu, P., Sakamoto, J., Marsala, M., et al. (2019) · Nature Medicine · doi:10.1038/s41591-018-0296-z · Cited by 708
Bioprinting of 3D convoluted renal proximal tubules on perfusable chips
Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., & Lewis, J. A. (2016) · Scientific Reports · doi:10.1038/srep34845 · Cited by 699
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Jang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673
Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach
Xavier, J. R., Thakur, T., Desai, P., Jaiswal, M. K., Sears, N., Cosgriff-Hernandez, E., Kaunas, R., & Gaharwar, A. K. (2015) · ACS Nano · doi:10.1021/nn507488s · Cited by 653
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Self-citationWriting in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Yi, H.-G., Jeong, Y. H., Kim, Y., Choi, Y.-J., Moon, H. E., Park, S. H., Kang, K. S., Bae, M., Jang, J., Youn, H., et al. (2019) · Nature Biomedical Engineering · doi:10.1038/s41551-019-0363-x · Cited by 634
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630
Microfluidic Organ-on-a-Chip Models of Human Intestine
Bein, A., Shin, W., Jalili-Firoozinezhad, S., Park, M. H., Sontheimer-Phelps, A., Tovaglieri, A., Chalkiadaki, A., Kim, H. J., & Ingber, D. E. (2018) · Cellular and Molecular Gastroenterology and Hepatology · doi:10.1016/j.jcmgh.2017.12.010 · Cited by 625
Multi-tissue interactions in an integrated three-tissue organ-on-a-chip platform
Skardal, A., Murphy, S. V., Devarasetty, M., Mead, I., Kang, H.-W., Seol, Y.-J., Shrike Zhang, Y., Shin, S.-R., Zhao, L., Aleman, J., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-08879-x · Cited by 623
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
Structural studies of gellan gum, an extracellular polysaccharide elaborated by Pseudomonas elodea
Jansson, P.-E., Lindberg, B., & Sandford, P. A. (1983) · Carbohydrate Research · doi:10.1016/0008-6215(83)88361-x · Cited by 612
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Self-citationHyaluronic acid-based hydrogels: from a natural polysaccharide to complex networks
Xu, X., Jha, A. K., Harrington, D. A., Farach-Carson, M. C., & Jia, X. (2012) · Soft Matter · doi:10.1039/c2sm06463d · Cited by 601
Controlling cell adhesion and degradation of chitosan films by N-acetylation
Freier, T., Koh, H. S., Kazazian, K., & Shoichet, M. S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.033 · Cited by 585
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Siqueira, G., Kokkinis, D., Libanori, R., Hausmann, M. K., Gladman, A. S., Neels, A., Tingaut, P., Zimmermann, T., Lewis, J. A., & Studart, A. R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604619 · Cited by 580
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Das, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Physical chemistry of supramolecular polymer networks
Seiffert, S., & Sprakel, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15191f · Cited by 552
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
Laronda, M. M., Rutz, A. L., Xiao, S., Whelan, K. A., Duncan, F. E., Roth, E. W., Woodruff, T. K., & Shah, R. N. (2017) · Nature Communications · doi:10.1038/ncomms15261 · Cited by 527
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Kim, B. S., Kwon, Y. W., Kong, J.-S., Park, G. T., Gao, G., Han, W., Kim, M.-B., Lee, H., Kim, J. H., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.03.040 · Cited by 502
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink
Nguyen, D., Hägg, D. A., Forsman, A., Ekholm, J., Nimkingratana, P., Brantsing, C., Kalogeropoulos, T., Zaunz, S., Concaro, S., Brittberg, M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-00690-y · Cited by 484
Mechanical Properties of Cellularly Responsive Hydrogels and Their Experimental Determination
Kloxin, A. M., Kloxin, C. J., Bowman, C. N., & Anseth, K. S. (2010) · Advanced Materials · doi:10.1002/adma.200904179 · Cited by 481
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
Hassell, B. A., Goyal, G., Lee, E., Sontheimer-Phelps, A., Levy, O., Chen, C. S., & Ingber, D. E. (2017) · Cell Reports · doi:10.1016/j.celrep.2017.09.043 · Cited by 467
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Jammed Microgel Inks for 3D Printing Applications
Highley, C. B., Song, K. H., Daly, A. C., & Burdick, J. A. (2019) · Advanced Science · doi:10.1002/advs.201801076 · Cited by 456
3D bioprinting of functional human skin: production and in vivo analysis
Cubo, N., Garcia, M., del Cañizo, J. F., Velasco, D., & Jorcano, J. L. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/015006 · Cited by 454
Sarker, B., Papageorgiou, D. G., Silva, R., Zehnder, T., Gul-E-Noor, F., Bertmer, M., Kaschta, J., Chrissafis, K., Detsch, R., & Boccaccini, A. R. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21509a · Cited by 446
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R., Stewart, E. M., in het Panhuis, M., Romero-Ortega, M., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 445
Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 436
A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage
Daly, A. C., Critchley, S. E., Rencsok, E. M., & Kelly, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045002 · Cited by 436
Bioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting
Miri, A. K., Nieto, D., Iglesias, L., Goodarzi Hosseinabadi, H., Maharjan, S., Ruiz‐Esparza, G. U., Khoshakhlagh, P., Manbachi, A., Dokmeci, M. R., Chen, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800242 · Cited by 431
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Rodell, C. B., Kaminski, A. L., & Burdick, J. A. (2013) · Biomacromolecules · doi:10.1021/bm401280z · Cited by 425
Maoz, B. M., Herland, A., FitzGerald, E. A., Grevesse, T., Vidoudez, C., Pacheco, A. R., Sheehy, S. P., Park, T.-E., Dauth, S., Mannix, R., et al. (2018) · Nature Biotechnology · doi:10.1038/nbt.4226 · Cited by 425
Elastin‐like polypeptides: Biomedical applications of tunable biopolymers
MacEwan, S. R., & Chilkoti, A. (2010) · Peptide Science · doi:10.1002/bip.21327 · Cited by 424
Rapid Continuous Multimaterial Extrusion Bioprinting
Liu, W., Zhang, Y. S., Heinrich, M. A., De Ferrari, F., Jang, H. L., Bakht, S. M., Alvarez, M. M., Yang, J., Li, Y., Trujillo‐de Santiago, G., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604630 · Cited by 424
Li, C., Faulkner‐Jones, A., Dun, A. R., Jin, J., Chen, P., Xing, Y., Yang, Z., Li, Z., Shu, W., Liu, D., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411383 · Cited by 423
The nature of laponite and its aqueous dispersions
Thompson, D. W., & Butterworth, J. T. (1992) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(92)90254-j · Cited by 419
Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
Wu, Z., Su, X., Xu, Y., Kong, B., Sun, W., & Mi, S. (2016) · Scientific Reports · doi:10.1038/srep24474 · Cited by 418
The effect of photopolymerization on stem cells embedded in hydrogels
Fedorovich, N. E., Oudshoorn, M. H., van Geemen, D., Hennink, W. E., Alblas, J., & Dhert, W. J. A. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.09.037 · Cited by 416
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
Self-citationEffects of artificial micro- and nano-structured surfaces on cell behaviour
Martínez, E., Engel, E., Planell, J. A., & Samitier, J. (2009) · Annals of Anatomy - Anatomischer Anzeiger · doi:10.1016/j.aanat.2008.05.006 · Cited by 394
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Byambaa, B., Annabi, N., Yue, K., Trujillo‐de Santiago, G., Alvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 394
Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389
Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Zhu, K., Shin, S. R., van Kempen, T., Li, Y., Ponraj, V., Nasajpour, A., Mandla, S., Hu, N., Liu, X., Leijten, J., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605352 · Cited by 386
Chen, M. B., Whisler, J. A., Fröse, J., Yu, C., Shin, Y., & Kamm, R. D. (2017) · Nature Protocols · doi:10.1038/nprot.2017.018 · Cited by 385
Maintenance of neural progenitor cell stemness in 3D hydrogels requires matrix remodelling
Madl, C. M., LeSavage, B. L., Dewi, R. E., Dinh, C. B., Stowers, R. S., Khariton, M., Lampe, K. J., Nguyen, D., Chaudhuri, O., Enejder, A., et al. (2017) · Nature Materials · doi:10.1038/nmat5020 · Cited by 384
Lin, H., Zhang, D., Alexander, P. G., Yang, G., Tan, J., Cheng, A. W.-M., & Tuan, R. S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.048 · Cited by 382
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Self-citationBio-inks for 3D bioprinting: recent advances and future prospects
Donderwinkel, I., van Hest, J. C. M., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py00826k · Cited by 378
Aqueous Two‐Phase Emulsion Bioink‐Enabled 3D Bioprinting of Porous Hydrogels
Ying, G., Jiang, N., Maharjan, S., Yin, Y., Chai, R., Cao, X., Yang, J., Miri, A. K., Hassan, S., & Zhang, Y. S. (2018) · Advanced Materials · doi:10.1002/adma.201805460 · Cited by 377
Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells
Gu, Q., Tomaskovic‐Crook, E., Lozano, R., Chen, Y., Kapsa, R. M., Zhou, Q., Wallace, G. G., & Crook, J. M. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600095 · Cited by 376
A 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M., Seol, Y.-J., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting
Müller, M., Becher, J., Schnabelrauch, M., & Zenobi-Wong, M. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035006 · Cited by 371
Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Wilson, S. A., Cross, L. M., Peak, C. W., & Gaharwar, A. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13602 · Cited by 369
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
Rhee, S., Puetzer, J. L., Mason, B. N., Reinhart-King, C. A., & Bonassar, L. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00288 · Cited by 364
Lee, H., & Cho, D.-W. (2016) · Lab on a Chip · doi:10.1039/c6lc00450d · Cited by 363
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
Mouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
Self-citation3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity
Poldervaart, M. T., Goversen, B., de Ruijter, M., Abbadessa, A., Melchels, F. P. W., Öner, F. C., Dhert, W. J. A., Vermonden, T., & Alblas, J. (2017) · PLOS ONE · doi:10.1371/journal.pone.0177628 · Cited by 357
Programmable CRISPR-responsive smart materials
English, M. A., Soenksen, L. R., Gayet, R. V., de Puig, H., Angenent-Mari, N. M., Mao, A. S., Nguyen, P. Q., & Collins, J. J. (2019) · Science · doi:10.1126/science.aaw5122 · Cited by 356
Engineering an in vitro air-blood barrier by 3D bioprinting
Horváth, L., Umehara, Y., Jud, C., Blank, F., Petri-Fink, A., & Rothen-Rutishauser, B. (2015) · Scientific Reports · doi:10.1038/srep07974 · Cited by 345
Jang, J., Kim, T. G., Kim, B. S., Kim, S.-W., Kwon, S.-M., & Cho, D.-W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.013 · Cited by 344
Gao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 341
Gao, G., Lee, J. H., Jang, J., Lee, D. H., Kong, J., Kim, B. S., Choi, Y., Jang, W. B., Hong, Y. J., Kwon, S., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700798 · Cited by 336
Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Brown, G., Lim, K. S., Jungst, T., Boeck, T., Blunk, T., Tessmar, J., Hooper, G. J., Woodfield, T. B. F., & Groll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 331
Self-citationCostantini, M., Testa, S., Mozetic, P., Barbetta, A., Fuoco, C., Fornetti, E., Tamiro, F., Bernardini, S., Jaroszewicz, J., Święszkowski, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.026 · Cited by 330
Lee, H., Han, W., Kim, H., Ha, D.-H., Jang, J., Kim, B. S., & Cho, D.-W. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01908 · Cited by 328
Levato, R., Webb, W. R., Otto, I. A., Mensinga, A., Zhang, Y., van Rijen, M., van Weeren, R., Khan, I. M., & Malda, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.005 · Cited by 326
Self-citation3D‐Bioprinted Mini‐Brain: A Glioblastoma Model to Study Cellular Interactions and Therapeutics
Heinrich, M. A., Bansal, R., Lammers, T., Zhang, Y. S., Michel Schiffelers, R., & Prakash, J. (2019) · Advanced Materials · doi:10.1002/adma.201806590 · Cited by 317
Biofabrication of multi-material anatomically shaped tissue constructs
Visser, J., Peters, B., Burger, T. J., Boomstra, J., Dhert, W. J. A., Melchels, F. P. W., & Malda, J. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035007 · Cited by 313
Self-citation3D bioprinted glioma stem cells for brain tumor model and applications of drug susceptibility
Dai, X., Ma, C., Lan, Q., & Xu, T. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045005 · Cited by 301
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
An attempt to categorize yield stress fluid behaviour
Moller, P., Fall, A., Chikkadi, V., Derks, D., & Bonn, D. (2009) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2009.0194 · Cited by 299
3D cell printing of functional skeletal muscle constructs using skeletal muscle-derived bioink
Choi, Y., Kim, T. G., Jeong, J., Yi, H., Park, J. W., Hwang, W., & Cho, D. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600483 · Cited by 298
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Self-citationKesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Almeida, C. R., Serra, T., Oliveira, M. I., Planell, J. A., Barbosa, M. A., & Navarro, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.035 · Cited by 290
3D Bioprinted Human Skeletal Muscle Constructs for Muscle Function Restoration
Kim, J. H., Seol, Y.-J., Ko, I. K., Kang, H.-W., Lee, Y. K., Yoo, J. J., Atala, A., & Lee, S. J. (2018) · Scientific Reports · doi:10.1038/s41598-018-29968-5 · Cited by 290
Wang, L. L., Highley, C. B., Yeh, Y., Galarraga, J. H., Uman, S., & Burdick, J. A. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36323 · Cited by 286
Microfluidic techniques for development of 3D vascularized tissue
Hasan, A., Paul, A., Vrana, N. E., Zhao, X., Memic, A., Hwang, Y.-S., Dokmeci, M. R., & Khademhosseini, A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.04.091 · Cited by 282
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
Martínez Ávila, H., Schwarz, S., Rotter, N., & Gatenholm, P. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.08.003 · Cited by 282
Direct 3D cell-printing of human skin with functional transwell system
Kim, B. S., Lee, J.-S., Gao, G., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c8 · Cited by 282
Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting
Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 280
Self-citationLiu, W., Zhong, Z., Hu, N., Zhou, Y., Maggio, L., Miri, A. K., Fragasso, A., Jin, X., Khademhosseini, A., & Zhang, Y. S. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9d44 · Cited by 280
O’Connell, C. D., Di Bella, C., Thompson, F., Augustine, C., Beirne, S., Cornock, R., Richards, C. J., Chung, J., Gambhir, S., Yue, Z., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015019 · Cited by 274
Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix
Yu, C., Ma, X., Zhu, W., Wang, P., Miller, K. L., Stupin, J., Koroleva-Maharajh, A., Hairabedian, A., & Chen, S. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.009 · Cited by 272
3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering
Daly, A. C., Cunniffe, G. M., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600182 · Cited by 272
Defined three-dimensional microenvironments boost induction of pluripotency
Caiazzo, M., Okawa, Y., Ranga, A., Piersigilli, A., Tabata, Y., & Lutolf, M. P. (2016) · Nature Materials · doi:10.1038/nmat4536 · Cited by 271
Zhang, K., Fu, Q., Yoo, J., Chen, X., Chandra, P., Mo, X., Song, L., Atala, A., & Zhao, W. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.008 · Cited by 268
The Next Frontier in Melt Electrospinning: Taming the Jet
Robinson, T. M., Hutmacher, D. W., & Dalton, P. D. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904664 · Cited by 267
Organ-Derived Decellularized Extracellular Matrix: A Game Changer for Bioink Manufacturing?
Choudhury, D., Tun, H. W., Wang, T., & Naing, M. W. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2018.03.003 · Cited by 265
Discovering Cell-Adhesion Peptides in Tissue Engineering: Beyond RGD
Huettner, N., Dargaville, T. R., & Forget, A. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2018.01.008 · Cited by 263
Clickable PEG hydrogel microspheres as building blocks for 3D bioprinting
Xin, S., Chimene, D., Garza, J. E., Gaharwar, A. K., & Alge, D. L. (2019) · Biomaterials Science · doi:10.1039/c8bm01286e · Cited by 263
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jang, J., Park, J. Y., Gao, G., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254
Gelatin hydrogels formed by orthogonal thiol–norbornene photochemistry for cell encapsulation
Mũnoz, Z., Shih, H., & Lin, C.-C. (2014) · Biomater. Sci. · doi:10.1039/c4bm00070f · Cited by 253
Shim, J.-H., Jang, K.-M., Hahn, S. K., Park, J. Y., Jung, H., Oh, K., Park, K. M., Yeom, J., Park, S. H., Kim, S. W., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014102 · Cited by 251
3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting
Chimene, D., Peak, C. W., Gentry, J. L., Carrow, J. K., Cross, L. M., Mondragon, E., Cardoso, G. B., Kaunas, R., & Gaharwar, A. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19808 · Cited by 248
Lim, K. S., Klotz, B. J., Lindberg, G. C. J., Melchels, F. P. W., Hooper, G. J., Malda, J., Gawlitta, D., & Woodfield, T. B. F. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900098 · Cited by 247
Self-citationPre-vascularization of in vitro three-dimensional tissues created by cell sheet engineering
Asakawa, N., Shimizu, T., Tsuda, Y., Sekiya, S., Sasagawa, T., Yamato, M., Fukai, F., & Okano, T. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.105 · Cited by 245
Photocrosslinkable Kappa‐Carrageenan Hydrogels for Tissue Engineering Applications
Mihaila, S. M., Gaharwar, A. K., Reis, R. L., Marques, A. P., Gomes, M. E., & Khademhosseini, A. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200317 · Cited by 244
Proof-of-concept: 3D bioprinting of pigmented human skin constructs
Ng, W. L., Qi, J. T. Z., Yeong, W. Y., & Naing, M. W. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9e1e · Cited by 241
Complex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels
Song, K. H., Highley, C. B., Rouff, A., & Burdick, J. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801331 · Cited by 241
Jin, Y., Liu, C., Chai, W., Compaan, A., & Huang, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03613 · Cited by 238
UV-Assisted 3D Bioprinting of Nanoreinforced Hybrid Cardiac Patch for Myocardial Tissue Engineering
Izadifar, M., Chapman, D., Babyn, P., Chen, X., & Kelly, M. E. (2018) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2017.0346 · Cited by 236
Biofabrication of Cell‐Loaded 3D Spider Silk Constructs
Schacht, K., Jüngst, T., Schweinlin, M., Ewald, A., Groll, J., & Scheibel, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409846 · Cited by 232
Self-citationLincoln, J., Lange, A. W., & Yutzey, K. E. (2006) · Developmental Biology · doi:10.1016/j.ydbio.2006.03.027 · Cited by 231
Bioprinted thrombosis-on-a-chip
Zhang, Y. S., Davoudi, F., Walch, P., Manbachi, A., Luo, X., Dell'Erba, V., Miri, A. K., Albadawi, H., Arneri, A., Li, X., et al. (2016) · Lab on a Chip · doi:10.1039/c6lc00380j · Cited by 227
Poldervaart, M. T., Gremmels, H., van Deventer, K., Fledderus, J. O., Öner, F. C., Verhaar, M. C., Dhert, W. J. A., & Alblas, J. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.04.007 · Cited by 224
Duarte Campos, D. F., Blaeser, A., Weber, M., Jäkel, J., Neuss, S., Jahnen-Dechent, W., & Fischer, H. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015003 · Cited by 224
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
Self-citationLenas, P., Moos, M., & Luyten, F. P. (2009) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2008.0575 · Cited by 221
Rodriguez, M. J., Brown, J., Giordano, J., Lin, S. J., Omenetto, F. G., & Kaplan, D. L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.046 · Cited by 220
Barba, A., Diez-Escudero, A., Maazouz, Y., Rappe, K., Espanol, M., Montufar, E. B., Bonany, M., Sadowska, J. M., Guillem-Marti, J., Öhman-Mägi, C., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14175 · Cited by 219
Combinatorial hydrogels with biochemical gradients for screening 3D cellular microenvironments
Vega, S. L., Kwon, M. Y., Song, K. H., Wang, C., Mauck, R. L., Han, L., & Burdick, J. A. (2018) · Nature Communications · doi:10.1038/s41467-018-03021-5 · Cited by 218
Cell adhesion and proliferation on RGD-modified recombinant spider silk proteins
Wohlrab, S., Müller, S., Schmidt, A., Neubauer, S., Kessler, H., Leal-Egaña, A., & Scheibel, T. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.05.069 · Cited by 216
Bioactive site-specifically modified proteins for 4D patterning of gel biomaterials
Shadish, J. A., Benuska, G. M., & DeForest, C. A. (2019) · Nature Materials · doi:10.1038/s41563-019-0367-7 · Cited by 211
Snyder, J. E., Hamid, Q., Wang, C., Chang, R., Emami, K., Wu, H., & Sun, W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034112 · Cited by 210
Omidinia‐Anarkoli, A., Boesveld, S., Tuvshindorj, U., Rose, J. C., Haraszti, T., & De Laporte, L. (2017) · Small · doi:10.1002/smll.201702207 · Cited by 210
Visible‐Light‐Mediated Thiol‐Ene Hydrogelation Using Eosin‐Y as the Only Photoinitiator
Shih, H., & Lin, C. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201200605 · Cited by 209
Castilho, M., Feyen, D., Flandes‐Iparraguirre, M., Hochleitner, G., Groll, J., Doevendans, P. A. F., Vermonden, T., Ito, K., Sluijter, J. P. G., & Malda, J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700311 · Cited by 204
Self-citationMcDermott, A. M., Herberg, S., Mason, D. E., Collins, J. M., Pearson, H. B., Dawahare, J. H., Tang, R., Patwa, A. N., Grinstaff, M. W., Kelly, D. J., et al. (2019) · Science Translational Medicine · doi:10.1126/scitranslmed.aav7756 · Cited by 203
Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications
Fedorovich, N. E., Swennen, I., Girones, J., Moroni, L., van Blitterswijk, C. A., Schacht, E., Alblas, J., & Dhert, W. J. A. (2009) · Biomacromolecules · doi:10.1021/bm801463q · Cited by 202
Sustained Release of BMP-2 in Bioprinted Alginate for Osteogenicity in Mice and Rats
Poldervaart, M. T., Wang, H., van der Stok, J., Weinans, H., Leeuwenburgh, S. C. G., Öner, F. C., Dhert, W. J. A., & Alblas, J. (2013) · PLoS ONE · doi:10.1371/journal.pone.0072610 · Cited by 202
Thiol–Ene Alginate Hydrogels as Versatile Bioinks for Bioprinting
Ooi, H. W., Mota, C., ten Cate, A. T., Calore, A., Moroni, L., & Baker, M. B. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00696 · Cited by 198
A Stimuli‐Responsive Nanocomposite for 3D Anisotropic Cell‐Guidance and Magnetic Soft Robotics
Tognato, R., Armiento, A. R., Bonfrate, V., Levato, R., Malda, J., Alini, M., Eglin, D., Giancane, G., & Serra, T. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201804647 · Cited by 198
Self-citationKim, H., Jang, J., Park, J., Lee, K.-P., Lee, S., Lee, D.-M., Kim, K. H., Kim, H. K., & Cho, D.-W. (2019) · Biofabrication · doi:10.1088/1758-5090/ab1a8b · Cited by 198
(Photo-)crosslinkable gelatin derivatives for biofabrication applications
Van Hoorick, J., Tytgat, L., Dobos, A., Ottevaere, H., Van Erps, J., Thienpont, H., Ovsianikov, A., Dubruel, P., & Van Vlierberghe, S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.07.035 · Cited by 192
Ooi, H. W., Hafeez, S., van Blitterswijk, C. A., Moroni, L., & Baker, M. B. (2017) · Mater. Horiz. · doi:10.1039/c7mh00373k · Cited by 189
Huang, S., Yao, B., Xie, J., & Fu, X. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.12.039 · Cited by 187
Cui, H., Zhu, W., Nowicki, M., Zhou, X., Khademhosseini, A., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600505 · Cited by 185
Automated 3D bioassembly of micro-tissues for biofabrication of hybrid tissue engineered constructs
Mekhileri, N. V., Lim, K. S., Brown, G. C. J., Mutreja, I., Schon, B. S., Hooper, G. J., & Woodfield, T. B. F. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9ef1 · Cited by 185
Gao, G., Park, J. Y., Kim, B. S., Jang, J., & Cho, D. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201801102 · Cited by 185
Tissue specific synthetic ECM hydrogels for 3-D in vitro maintenance of hepatocyte function
Skardal, A., Smith, L., Bharadwaj, S., Atala, A., Soker, S., & Zhang, Y. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.03.034 · Cited by 183
Cryopreserved cell-laden alginate microgel bioink for 3D bioprinting of living tissues
Jeon, O., Lee, Y. B., Hinton, T. J., Feinberg, A. W., & Alsberg, E. (2019) · Materials Today Chemistry · doi:10.1016/j.mtchem.2018.11.009 · Cited by 183
Luo, Y., Wu, C., Lode, A., & Gelinsky, M. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015005 · Cited by 182
Patient‐Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds
Faramarzi, N., Yazdi, I. K., Nabavinia, M., Gemma, A., Fanelli, A., Caizzone, A., Ptaszek, L. M., Sinha, I., Khademhosseini, A., Ruskin, J. N., et al. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701347 · Cited by 182
Satoh, T., Sugiura, S., Shin, K., Onuki-Nagasaki, R., Ishida, S., Kikuchi, K., Kakiki, M., & Kanamori, T. (2018) · Lab on a Chip · doi:10.1039/c7lc00952f · Cited by 181
Kim, Y. B., Lee, H., & Kim, G. H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11669 · Cited by 179
Contact guidance for cardiac tissue engineering using 3D bioprinted gelatin patterned hydrogel
Tijore, A., Irvine, S. A., Sarig, U., Mhaisalkar, P., Baisane, V., & Venkatraman, S. (2018) · Biofabrication · doi:10.1088/1758-5090/aaa15d · Cited by 177
Daly, A. C., & Kelly, D. J. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.028 · Cited by 176
Injectable shear-thinning nanoengineered hydrogels for stem cell delivery
Thakur, A., Jaiswal, M. K., Peak, C. W., Carrow, J. K., Gentry, J., Dolatshahi-Pirouz, A., & Gaharwar, A. K. (2016) · Nanoscale · doi:10.1039/c6nr02299e · Cited by 173
Designer biomaterials for mechanobiology
Li, L., Eyckmans, J., & Chen, C. S. (2017) · Nature Materials · doi:10.1038/nmat5049 · Cited by 173
Lewis, P. L., Green, R. M., & Shah, R. N. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.042 · Cited by 167
Liquid-like Solids Support Cells in 3D
Bhattacharjee, T., Gil, C. J., Marshall, S. L., Urueña, J. M., O’Bryan, C. S., Carstens, M., Keselowsky, B., Palmer, G. D., Ghivizzani, S., Gibbs, C. P., et al. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00218 · Cited by 165
Evaluation of an alginate–gelatine crosslinked hydrogel for bioplotting
Zehnder, T., Sarker, B., Boccaccini, A. R., & Detsch, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/2/025001 · Cited by 163
Ning, L., Sun, H., Lelong, T., Guilloteau, R., Zhu, N., Schreyer, D. J., & Chen, D. (2018) · Biofabrication · doi:10.1088/1758-5090/aacd30 · Cited by 163
Engineering Hydrogel Microenvironments to Recapitulate the Stem Cell Niche
Madl, C. M., & Heilshorn, S. C. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-120954 · Cited by 160
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Self-citationFundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Self-citationAdvanced hydrogels for the repair of cartilage defects and regeneration
Wei, W., Ma, Y., Yao, X., Zhou, W., Wang, X., Li, C., Lin, J., He, Q., Leptihn, S., & Ouyang, H. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.09.030 · Cited by 357
Progress and Opportunities for Machine Learning in Materials and Processes of Additive Manufacturing
Ng, W. L., Goh, G. L., Goh, G. D., Ten, J. S. J., & Yeong, W. Y. (2024) · Advanced Materials · doi:10.1002/adma.202310006 · Cited by 339
Metadata
- Authors
- Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-02-11
- Volume
- 32
- Issue
- 12
- Pages
- e1906423-e1906423
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3006231048
- Cited by
- 476
- References
- 301
- FWCI
- 21.01
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.