The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Bidirectional Catalysts for Liquid–Solid Redox Conversion in Lithium–Sulfur Batteries
Abstract
Accelerated conversion by catalysis is a promising way to inhibit shuttling of soluble polysulfides in lithium–sulfur (Li–S) batteries, but most of the reported catalysts work only for one direction sulfur reaction (reduction or oxidation), which is still not a root solution since fast cycled use of sulfur species is not finally realized. A bidirectional catalyst design, oxide–sulfide heterostructure, is proposed to accelerate both reduction of soluble polysulfides and oxidation of insoluble discharge products (e.g., Li 2 S), indicating a fundamental way for improving both the cycling stability and sulfur utilization. Typically, a TiO 2–Ni 3 S 2 heterostructure is prepared by in situ growing TiO 2 nanoparticles on Ni 3 S 2 surface and the intimately bonded interfaces are the key for bidirectional catalysis. For reduction, TiO 2 traps while Ni 3 S 2 catalytically converts polysulfides. For oxidation, TiO 2 and Ni 3 S 2 both show catalytic activity for Li 2 S dissolution, refreshing the catalyst surface. The produced sulfur cathode with TiO 2–Ni 3 S 2 delivers a low capacity decay of 0.038% per cycle for 900 cycles at 0.5C and specially, with a sulfur loading of 3.9 mg cm−2, achieves a high capacity retention of 65% over 500 cycles at 0.3C. This work unlocks how a bidirectional catalyst works for boosting Li–S batteries approaching practical uses.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Henkelman, G., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1323224 · Cited by 9,523
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Biesinger, M. C., Lau, L. W. M., Gerson, A. R., & Smart, R. S. C. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.07.086 · Cited by 4,592
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Zhang, J., Wang, T., Pohl, D., Rellinghaus, B., Dong, R., Liu, S., Zhuang, X., & Feng, X. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602237 · Cited by 1,412
Self-citationTao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Self-citationCatalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationZhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Self-citationMolecular Catalysis of Electrochemical Reactions. Mechanistic Aspects
Savéant, J.-M. (2008) · Chemical Reviews · doi:10.1021/cr068079z · Cited by 978
Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
Self-citationMoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
Li, Z., Zhang, J., & Lou, X. W. (. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506972 · Cited by 841
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
Zhang, G., Feng, Y.-S., Lu, W.-T., He, D., Wang, C.-Y., Li, Y.-K., Wang, X.-Y., & Cao, F.-F. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b00413 · Cited by 633
He, W., Wang, C., Li, H., Deng, X., Xu, X., & Zhai, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700983 · Cited by 598
Xue, W., Shi, Z., Suo, L., Wang, C., Wang, Z., Wang, H., So, K. P., Maurano, A., Yu, D., Chen, Y., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0351-0 · Cited by 591
Multi‐Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium–Sulfur Batteries
Lei, T., Chen, W., Huang, J., Yan, C., Sun, H., Wang, C., Zhang, W., Li, Y., & Xiong, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601843 · Cited by 548
Lim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
High “C” rate Li-S cathodes: sulfur imbibed bimodal porous carbons
He, G., Ji, X., & Nazar, L. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01219c · Cited by 475
Yao, Y., Wang, H., Yang, H., Zeng, S., Xu, R. C., Liu, F., Shi, P., Feng, Y., Wang, K., Yang, W., et al. (2019) · Advanced Materials · doi:10.1002/adma.201905658 · Cited by 414
Zhao, Y., Wu, W., Li, J., Xu, Z., & Guan, L. (2014) · Advanced Materials · doi:10.1002/adma.201401191 · Cited by 404
Propelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries
Zheng, C., Niu, S., Lv, W., Zhou, G., Li, J., Fan, S., Deng, Y., Pan, Z., Li, B., Kang, F., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.040 · Cited by 391
Self-citation2D MoN‐VN Heterostructure To Regulate Polysulfides for Highly Efficient Lithium‐Sulfur Batteries
Ye, C., Jiao, Y., Jin, H., Slattery, A. D., Davey, K., Wang, H., & Qiao, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201810579 · Cited by 385
Reversibility and efficiency in electrocatalytic energy conversion and lessons from enzymes
Armstrong, F. A., & Hirst, J. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1103697108 · Cited by 366
Photo/Electrochemical Applications of Metal Sulfide/TiO2 Heterostructures
Zheng, L., Teng, F., Ye, X., Zheng, H., & Fang, X. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902355 · Cited by 360
Lin, H., Zhang, S., Zhang, T., Ye, H., Yao, Q., Zheng, G. W., & Lee, J. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801868 · Cited by 199
Li, D., Li, X., Hou, X., Sun, X., Liu, B., & He, D. (2014) · Chemical Communications · doi:10.1039/c4cc01311e · Cited by 88
Cited by
Cation-doped ZnS catalysts for polysulfide conversion in lithium–sulfur batteries
Shen, Z., Jin, X., Tian, J., Li, M., Yuan, Y., Zhang, S., Fang, S., Fan, X., Xu, W., Lu, H., et al. (2022) · Nature Catalysis · doi:10.1038/s41929-022-00804-4 · Cited by 621
Huang, Y., Lin, L., Zhang, C., Liu, L., Li, Y., Qiao, Z., Lin, J., Wei, Q., Wang, L., Xie, Q., et al. (2022) · Advanced Science · doi:10.1002/advs.202106004 · Cited by 463
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Selective Catalysis Remedies Polysulfide Shuttling in Lithium‐Sulfur Batteries
Hua, W., Li, H., Pei, C., Xia, J., Sun, Y., Zhang, C., Lv, W., Tao, Y., Jiao, Y., Zhang, B., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101006 · Cited by 449
Self-citationRecent Advances in Heterostructure Engineering for Lithium–Sulfur Batteries
Huang, S., Wang, Z., Von Lim, Y., Wang, Y., Li, Y., Zhang, D., & Yang, H. Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003689 · Cited by 438
Metadata
- Authors
- Wang, R., Luo, C., Wang, T., Zhou, G., Deng, Y., He, Y., Zhang, Q., Kang, F., Lv, W., & Yang, Q.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-07-06
- Volume
- 32
- Issue
- 32
- Pages
- e2000315-e2000315
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3039186878
- Cited by
- 423
- References
- 31
- FWCI
- 24.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.