The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
High‐Safety and High‐Energy‐Density Lithium Metal Batteries in a Novel Ionic‐Liquid Electrolyte
Abstract
Rechargeable lithium metal batteries are next generation energy storage devices with high energy density, but face challenges in achieving high energy density, high safety, and long cycle life. Here, lithium metal batteries in a novel nonflammable ionic‐liquid (IL) electrolyte composed of 1‐ethyl‐3‐methylimidazolium (EMIm) cations and high‐concentration bis(fluorosulfonyl)imide (FSI) anions, with sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) as a key additive are reported. The Na ion participates in the formation of hybrid passivation interphases and contributes to dendrite‐free Li deposition and reversible cathode electrochemistry. The electrolyte of low viscosity allows practically useful cathode mass loading up to ≈16 mg cm−2. Li anodes paired with lithium cobalt oxide (LiCoO 2) and lithium nickel cobalt manganese oxide (LiNi 0.8 Co 0.1 Mn 0.1 O 2, NCM 811) cathodes exhibit 99.6–99.9% Coulombic efficiencies, high discharge voltages up to 4.4 V, high specific capacity and energy density up to ≈199 mAh g−1 and ≈765 Wh kg−1 respectively, with impressive cycling performances over up to 1200 cycles. Highly stable passivation interphases formed on both electrodes in the novel IL electrolyte are the key to highly reversible lithium metal batteries, especially for Li–NMC 811 full batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Winter, M., Barnett, B., & Xu, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00422 · Cited by 2,193
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries
Liu, W., Oh, P., Liu, X., Lee, M., Cho, W., Chae, S., Kim, Y., & Cho, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409262 · Cited by 1,960
A Review of Solid Electrolyte Interphases on Lithium Metal Anode
Cheng, X., Zhang, R., Zhao, C., Wei, F., Zhang, J., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500213 · Cited by 1,786
Yamada, Y., Furukawa, K., Sodeyama, K., Kikuchi, K., Yaegashi, M., Tateyama, Y., & Yamada, A. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412807w · Cited by 1,525
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
Nanostructured high-energy cathode materials for advanced lithium batteries
Sun, Y.-K., Chen, Z., Noh, H.-J., Lee, D.-J., Jung, H.-G., Ren, Y., Wang, S., Yoon, C. S., Myung, S.-T., & Amine, K. (2012) · Nature Materials · doi:10.1038/nmat3435 · Cited by 1,093
Yan, P., Zheng, J., Liu, J., Wang, B., Cheng, X., Zhang, Y., Sun, X., Wang, C., & Zhang, J.-G. (2018) · Nature Energy · doi:10.1038/s41560-018-0191-3 · Cited by 826
Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries
Zeng, Z., Murugesan, V., Han, K. S., Jiang, X., Cao, Y., Xiao, L., Ai, X., Yang, H., Zhang, J.-G., Sushko, M. L., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0196-y · Cited by 783
High-energy lithium metal pouch cells with limited anode swelling and long stable cycles
Niu, C., Lee, H., Chen, S., Li, Q., Du, J., Xu, W., Zhang, J.-G., Whittingham, M. S., Xiao, J., & Liu, J. (2019) · Nature Energy · doi:10.1038/s41560-019-0390-6 · Cited by 732
The role of nanotechnology in the development of battery materials for electric vehicles
Lu, J., Chen, Z., Ma, Z., Pan, F., Curtiss, L. A., & Amine, K. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.207 · Cited by 700
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Matsumoto, H., Sakaebe, H., Tatsumi, K., Kikuta, M., Ishiko, E., & Kono, M. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.018 · Cited by 572
Wang, J., Huang, W., Pei, A., Li, Y., Shi, F., Yu, X., & Cui, Y. (2019) · Nature Energy · doi:10.1038/s41560-019-0413-3 · Cited by 528
Self-citationHigh-Concentration Ether Electrolytes for Stable High-Voltage Lithium Metal Batteries
Ren, X., Zou, L., Jiao, S., Mei, D., Engelhard, M. H., Li, Q., Lee, H., Niu, C., Adams, B. D., Wang, C., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00381 · Cited by 502
High Lithium Metal Cycling Efficiency in a Room-Temperature Ionic Liquid
Howlett, P. C., MacFarlane, D. R., & Hollenkamp, A. F. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1664051 · Cited by 479
Zhang, J.-N., Li, Q., Wang, Y., Zheng, J., Yu, X., & Li, H. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.016 · Cited by 473
Zhang, Q., Pan, J., Lu, P., Liu, Z., Verbrugge, M. W., Sheldon, B. W., Cheng, Y.-T., Qi, Y., & Xiao, X. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b05283 · Cited by 472
Bisalt ether electrolytes: a pathway towards lithium metal batteries with Ni-rich cathodes
Alvarado, J., Schroeder, M. A., Pollard, T. P., Wang, X., Lee, J. Z., Zhang, M., Wynn, T., Ding, M., Borodin, O., Meng, Y. S., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02601g · Cited by 439
Self-citationOng, S. P., Andreussi, O., Wu, Y., Marzari, N., & Ceder, G. (2011) · Chemistry of Materials · doi:10.1021/cm200679y · Cited by 425
Improving battery safety by early detection of internal shorting with a bifunctional separator
Wu, H., Zhuo, D., Kong, D., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6193 · Cited by 400
A carbonate-free, sulfone-based electrolyte for high-voltage Li-ion batteries
Alvarado, J., Schroeder, M. A., Zhang, M., Borodin, O., Gobrogge, E., Olguin, M., Ding, M. S., Gobet, M., Greenbaum, S., Meng, Y. S., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.005 · Cited by 385
Xie, J., Sendek, A. D., Cubuk, E. D., Zhang, X., Lu, Z., Gong, Y., Wu, T., Shi, F., Liu, W., Reed, E. J., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b02561 · Cited by 368
Fast and reversible thermoresponsive polymer switching materials for safer batteries
Chen, Z., Hsu, P.-C., Lopez, J., Li, Y., To, J. W. F., Liu, N., Wang, C., Andrews, S. C., Liu, J., Cui, Y., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2015.9 · Cited by 360
Self-citationHowlett, P. C., Brack, N., Hollenkamp, A. F., Forsyth, M., & MacFarlane, D. R. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2164726 · Cited by 355
Liu, K., Liu, W., Qiu, Y., Kong, B., Sun, Y., Chen, Z., Zhuo, D., Lin, D., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1601978 · Cited by 354
Eshetu, G. G., Judez, X., Li, C., Martinez-Ibañez, M., Gracia, I., Bondarchuk, O., Carrasco, J., Rodriguez-Martinez, L. M., Zhang, H., & Armand, M. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04612 · Cited by 351
Lithium Secondary Batteries Using Modified-Imidazolium Room-Temperature Ionic Liquid
Seki, S., Kobayashi, Y., Miyashiro, H., Ohno, Y., Usami, A., Mita, Y., Kihira, N., Watanabe, M., & Terada, N. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0620872 · Cited by 349
How Electrolytes Influence Battery Safety
Roth, E. P., & Orendorff, C. J. (2012) · Interface magazine · doi:10.1149/2.f04122if · Cited by 347
Investigating the electrochemical windows of ionic liquids
Hayyan, M., Mjalli, F. S., Hashim, M. A., AlNashef, I. M., & Mei, T. X. (2012) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2012.07.011 · Cited by 340
Lithium Diffusion Mechanism through Solid–Electrolyte Interphase in Rechargeable Lithium Batteries
Ramasubramanian, A., Yurkiv, V., Foroozan, T., Ragone, M., Shahbazian-Yassar, R., & Mashayek, F. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b00436 · Cited by 340
Nonflammable Nitrile Deep Eutectic Electrolyte Enables High-Voltage Lithium Metal Batteries
Hu, Z., Xian, F., Guo, Z., Lu, C., Du, X., Cheng, X., Zhang, S., Dong, S., Cui, G., & Chen, L. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b05003 · Cited by 296
On the application of ionic liquids for rechargeable Li batteries: High voltage systems
Borgel, V., Markevich, E., Aurbach, D., Semrau, G., & Schmidt, M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.08.099 · Cited by 281
Why Bis(fluorosulfonyl)imide Is a “Magic Anion” for Electrochemistry
Shkrob, I. A., Marin, T. W., Zhu, Y., & Abraham, D. P. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp506567p · Cited by 281
Self-citationLiu, Z., Qi, Y., Lin, Y. X., Chen, L., Lu, P., & Chen, L. Q. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0151605jes · Cited by 243
Application of room temperature ionic liquids to Li batteries
Sakaebe, H., Matsumoto, H., & Tatsumi, K. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2007.02.054 · Cited by 241
Eshetu, G. G., Diemant, T., Grugeon, S., Behm, R. J., Laruelle, S., Armand, M., & Passerini, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04406 · Cited by 235
Imidazolium-Based Room-Temperature Ionic Liquid for Lithium Secondary Batteries
Seki, S., Ohno, Y., Kobayashi, Y., Miyashiro, H., Usami, A., Mita, Y., Tokuda, H., Watanabe, M., Hayamizu, K., Tsuzuki, S., et al. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2426871 · Cited by 214
Ionic liquid-based electrolytes for “beyond lithium” battery technologies
Giffin, G. A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05260f · Cited by 214
Autonomic Shutdown of Lithium‐Ion Batteries Using Thermoresponsive Microspheres
Baginska, M., Blaiszik, B. J., Merriman, R. J., Sottos, N. R., Moore, J. S., & White, S. R. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100683 · Cited by 205
Exceptional long-life performance of lithium-ion batteries using ionic liquid-based electrolytes
Elia, G. A., Ulissi, U., Jeong, S., Passerini, S., & Hassoun, J. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01295g · Cited by 177
Leung, K. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp308929a · Cited by 170
Jeong, S., Inaba, M., Iriyama, Y., Abe, T., & Ogumi, Z. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.08.065 · Cited by 153
Girard, G. M. A., Hilder, M., Nucciarone, D., Whitbread, K., Zavorine, S., Moser, M., Forsyth, M., MacFarlane, D. R., & Howlett, P. C. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b01929 · Cited by 114
Electrochemistry in Room-Temperature Ionic Liquids: Potential Windows at Mercury Electrodes
Rogers, E. I., Šljukić, B., Hardacre, C., & Compton, R. G. (2009) · Journal of Chemical & Engineering Data · doi:10.1021/je800898z · Cited by 98
Klein, J. M., Panichi, E., & Gurkan, B. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp04631j · Cited by 93
How to Reduce the Cointercalation of Propylene Carbonate in Li x ZrS2 and Other Layered Compounds
McKinnon, W. R., & Dahn, J. R. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113839 · Cited by 71
Rechargeable Lithium and Sodium Anodes in Chloroaluminate Molten Salts Containing Thionyl Chloride
Fuller, J., Osteryoung, R. A., & Carlin, R. T. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048390 · Cited by 69
Wagner, R., Streipert, B., Kraft, V., Jiménez, A. R., Röser, S., Kasnatscheew, J., Gallus, D. R., Börner, M., Mayer, C., Arlinghaus, H. F., et al. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600096 · Cited by 63
Ionic Liquids for Lithium Ion and Related Batteries
Webber, A., & Blomgren, G. E. (2002) · Springer eBooks · doi:10.1007/0-306-47508-1_7 · Cited by 44
Cited by
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Overview of batteries and battery management for electric vehicles
Liu, W., Placke, T., & Chau, K. T. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.03.016 · Cited by 715
Xiao, P., Yun, X., Chen, Y., Guo, X., Gao, P., Zhou, G., & Zheng, C. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00151b · Cited by 443
Abdalla, A. N., Nazir, M. S., Tao, H., Cao, S., Ji, R., Jiang, M., & Yao, L. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102811 · Cited by 406
Engineering a passivating electric double layer for high performance lithium metal batteries
Zhang, W., Lu, Y., Wan, L., Zhou, P., Xia, Y., Yan, S., Chen, X., Zhou, H., Dong, H., & Liu, K. (2022) · Nature Communications · doi:10.1038/s41467-022-29761-z · Cited by 314
Metadata
- Authors
- Sun, H., Zhu, G., Zhu, Y., Lin, M., Chen, H., Li, Y., Hung, W. H., Zhou, B., Wang, X., Bai, Y., Gu, M., Huang, C., Tai, H., Xu, X., Angell, M., Shyue, J., & Dai, H.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-05-25
- Volume
- 32
- Issue
- 26
- Pages
- e2001741-e2001741
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3026312933
- Cited by
- 338
- References
- 61
- FWCI
- 14.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.