The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
3D Printed Flexible Strain Sensors: From Printing to Devices and Signals
Abstract
The revolutionary and pioneering advancements of flexible electronics provide the boundless potential to become one of the leading trends in the exploitation of wearable devices and electronic skin. Working as substantial intermediates for the collection of external mechanical signals, flexible strain sensors that get intensive attention are regarded as indispensable components in flexible integrated electronic systems. Compared with conventional preparation methods including complicated lithography and transfer printing, 3D printing technology is utilized to manufacture various flexible strain sensors owing to the low processing cost, superior fabrication accuracy, and satisfactory production efficiency. Herein, up‐to‐date flexible strain sensors fabricated via 3D printing are highlighted, focusing on different printing methods based on photocuring and materials extrusion, including Digital Light Processing (DLP), fused deposition modeling (FDM), and direct ink writing (DIW). Sensing mechanisms of 3D printed strain sensors are also discussed. Furthermore, the existing bottlenecks and future prospects are provided for further progressing research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
3D printing of conducting polymers
Yuk, H., Lu, B., Lin, S., Qu, K., Xu, J., Luo, J., & Zhao, X. (2020) · Nature Communications · doi:10.1038/s41467-020-15316-7 · Cited by 1,001
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
Li, Z., Li, H., Wu, Z., Wang, M., Luo, J., Torun, H., Hu, P., Yang, C., Grundmann, M., Liu, X., et al. (2019) · Materials Horizons · doi:10.1039/c8mh01365a · Cited by 760
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Darabi, M. A., Khosrozadeh, A., Mbeleck, R., Liu, Y., Chang, Q., Jiang, J., Cai, J., Wang, Q., Luo, G., & Xing, M. (2017) · Advanced Materials · doi:10.1002/adma.201700533 · Cited by 672
A Highly Efficient Self‐Healing Elastomer with Unprecedented Mechanical Properties
Zhang, L., Liu, Z., Wu, X., Guan, Q., Chen, S., Sun, L., Guo, Y., Wang, S., Song, J., Jeffries, E. M., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901402 · Cited by 664
Super-tough MXene-functionalized graphene sheets
Zhou, T., Wu, C., Wang, Y., Tomsia, A. P., Li, M., Saiz, E., Fang, S., Baughman, R. H., Jiang, L., & Cheng, Q. (2020) · Nature Communications · doi:10.1038/s41467-020-15991-6 · Cited by 578
Seyedin, S., Uzun, S., Levitt, A., Anasori, B., Dion, G., Gogotsi, Y., & Razal, J. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910504 · Cited by 557
Deng, Z., Hu, T., Lei, Q., He, J., Ma, P. X., & Guo, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20178 · Cited by 486
Christ, J. F., Aliheidari, N., Ameli, A., & Pötschke, P. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.011 · Cited by 481
Ultrastretchable and Self-Healing Double-Network Hydrogel for 3D Printing and Strain Sensor
Liu, S., & Li, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07445 · Cited by 456
Sensitive Wearable Temperature Sensor with Seamless Monolithic Integration
Shin, J., Jeong, B., Kim, J., Nam, V. B., Yoon, Y., Jung, J., Hong, S., Lee, H., Eom, H., Yeo, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.201905527 · Cited by 449
Parida, K., Thangavel, G., Cai, G., Zhou, X., Park, S., Xiong, J., & Lee, P. S. (2019) · Nature Communications · doi:10.1038/s41467-019-10061-y · Cited by 426
3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J. (2017) · Advanced Materials · doi:10.1002/adma.201604827 · Cited by 419
Digital light processing 3D printing of conductive complex structures
Mu, Q., Wang, L., Dunn, C. K., Kuang, X., Duan, F., Zhang, Z., Qi, H. J., & Wang, T. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.08.011 · Cited by 411
3D Printing of Living Responsive Materials and Devices
Liu, X., Yuk, H., Lin, S., Parada, G. A., Tang, T., Tham, E., de la Fuente‐Nunez, C., Lu, T. K., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704821 · Cited by 393
The Boom in 3D-Printed Sensor Technology
Xu, Y., Wu, X., Guo, X., Kong, B., Zhang, M., Qian, X., Mi, S., & Sun, W. (2017) · Sensors · doi:10.3390/s17051166 · Cited by 361
MXene‐Reinforced Cellulose Nanofibril Inks for 3D‐Printed Smart Fibres and Textiles
Cao, W., Ma, C., Mao, D., Zhang, J., Ma, M., & Chen, F. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905898 · Cited by 332
Printed subthreshold organic transistors operating at high gain and ultralow power
Jiang, C., Choi, H. W., Cheng, X., Ma, H., Hasko, D., & Nathan, A. (2019) · Science · doi:10.1126/science.aav7057 · Cited by 308
Zhang, F., Feng, Y., Qin, M., Gao, L., Li, Z., Zhao, F., Zhang, Z., Lv, F., & Feng, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901383 · Cited by 308
A deep-learned skin sensor decoding the epicentral human motions
Kim, K. K., Ha, I., Kim, M., Choi, J., Won, P., Jo, S., & Ko, S. H. (2020) · Nature Communications · doi:10.1038/s41467-020-16040-y · Cited by 299
A transparent, self-healing and high-κ dielectric for low-field-emission stretchable optoelectronics
Tan, Y. J., Godaba, H., Chen, G., Tan, S. T. M., Wan, G., Li, G., Lee, P. M., Cai, Y., Li, S., Shepherd, R. F., et al. (2020) · Nature Materials · doi:10.1038/s41563-019-0548-4 · Cited by 296
A multifunctional skin-like sensor based on a 3D printed thermo-responsive hydrogel
Lei, Z., Wang, Q., & Wu, P. (2017) · Materials Horizons · doi:10.1039/c7mh00262a · Cited by 288
A Sensor Fault Diagnosis Method for a Lithium-Ion Battery Pack in Electric Vehicles
Xiong, R., Yu, Q., Shen, W., Lin, C., & Sun, F. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2893622 · Cited by 281
Xiang, D., Zhang, X., Li, Y., Harkin-Jones, E., Zheng, Y., Wang, L., Zhao, C., & Wang, P. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107250 · Cited by 268
Guo, Q., Zhang, X., Zhao, F., Song, Q., Su, G., Tan, Y., Tao, Q., Zhou, T., Yu, Y., Zhou, Z., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b09802 · Cited by 249
Printable Smart Pattern for Multifunctional Energy-Management E-Textile
Zhang, M., Zhao, M., Jian, M., Wang, C., Yu, A., Yin, Z., Liang, X., Wang, H., Xia, K., Liang, X., et al. (2019) · Matter · doi:10.1016/j.matt.2019.02.003 · Cited by 247
Complexation-induced resolution enhancement of 3D-printed hydrogel constructs
Gong, J., Schuurmans, C. C. L., Genderen, A. M. V., Cao, X., Li, W., Cheng, F., He, J. J., López, A., Huerta, V., Manríquez, J., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-14997-4 · Cited by 233
Self-citation3D-Printed Ultra-Robust Surface-Doped Porous Silicone Sensors for Wearable Biomonitoring
Davoodi, E., Montazerian, H., Haghniaz, R., Rashidi, A., Ahadian, S., Sheikhi, A., Chen, J., Khademhosseini, A., Milani, A. S., Hoorfar, M., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b06283 · Cited by 232
3D printing of ionic conductors for high-sensitivity wearable sensors
Yin, X.-Y., Zhang, Y., Cai, X., Guo, Q., Yang, J., & Wang, Z. L. (2019) · Materials Horizons · doi:10.1039/c8mh01398e · Cited by 227
Polymer-based sensors: A review
Cichosz, S., Masek, A., & Zaborski, M. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.03.024 · Cited by 213
Rapid 3D Patterning of Poly(acrylic acid) Ionic Hydrogel for Miniature pH Sensors
Yin, M., Yao, M., Gao, S., Zhang, A. P., Tam, H., & Wai, P. A. (2016) · Advanced Materials · doi:10.1002/adma.201504021 · Cited by 190
Agarwala, S., Goh, G. L., Dinh Le, T.-S., An, J., Peh, Z. K., Yeong, W. Y., & Kim, Y.-J. (2019) · ACS Sensors · doi:10.1021/acssensors.8b01293 · Cited by 186
Christ, J. F., Aliheidari, N., Pötschke, P., & Ameli, A. (2018) · Polymers · doi:10.3390/polym11010011 · Cited by 184
An ultraflexible organic differential amplifier for recording electrocardiograms
Sugiyama, M., Uemura, T., Kondo, M., Akiyama, M., Namba, N., Yoshimoto, S., Noda, Y., Araki, T., & Sekitani, T. (2019) · Nature Electronics · doi:10.1038/s41928-019-0283-5 · Cited by 177
A review of electronic skin: soft electronics and sensors for human health
Zhang, S., Li, S., Xia, Z., & Cai, K. (2020) · Journal of Materials Chemistry B · doi:10.1039/c9tb02531f · Cited by 177
Strategies for Designing Stretchable Strain Sensors and Conductors
Wu, S., Peng, S., Yu, Y., & Wang, C. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900908 · Cited by 173
Photosensitive ZrO2 suspensions for stereolithography
Zhang, K., He, R., Xie, C., Wang, G., Ding, G., Wang, M., Song, W., & Fang, D. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.03.123 · Cited by 165
Highly Durable Nanofiber-Reinforced Elastic Conductors for Skin-Tight Electronic Textiles
Jin, H., Nayeem, M. O. G., Lee, S., Matsuhisa, N., Inoue, D., Yokota, T., Hashizume, D., & Someya, T. (2019) · ACS Nano · doi:10.1021/acsnano.9b02297 · Cited by 165
Xiang, D., Zhang, X., Harkin‐Jones, E., Zhu, W., Zhou, Z., Shen, Y., Li, Y., Zhao, C., & Wang, P. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105730 · Cited by 164
Skin-like Ultrasensitive Strain Sensor for Full-Range Detection of Human Health Monitoring
Sun, Z., Yang, S., Zhao, P., Zhang, J., Yang, Y., Ye, X., Zhao, X., Cui, N., Tong, Y., Liu, Y., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b21751 · Cited by 157
Zhang, H., Lu, Y., Han, W., Zhu, J., Zhang, Y., & Huang, W. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124766 · Cited by 144
Self-citationHuang, K., Dong, S., Yang, J., Yan, J., Xue, Y., You, X., Hu, J., Gao, L., Zhang, X., & Ding, Y. (2018) · Carbon · doi:10.1016/j.carbon.2018.11.008 · Cited by 142
Ali, M. M., Maddipatla, D., Narakathu, B. B., Chlaihawi, A. A. J., Emamian, S., Janabi, F., Bazuin, B. J., & Atashbar, M. Z. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.03.003 · Cited by 138
Zhang, C., Li, H., Huang, A., Zhang, Q., Rui, K., Lin, H., Sun, G., Zhu, J., Peng, H., & Huang, W. (2019) · Small · doi:10.1002/smll.201805493 · Cited by 129
Self-citationMetallic Sandwiched-Aerogel Hybrids Enabling Flexible and Stretchable Intelligent Sensor
Zhang, H., Han, W., Xu, K., Zhang, Y., Lu, Y., Nie, Z., Du, Y., Zhu, J., & Huang, W. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c00372 · Cited by 122
Self-citation3D Printing of Highly Stretchable Strain Sensors Based on Carbon Nanotube Nanocomposites
Abshirini, M., Charara, M., Liu, Y., Saha, M. C., & Altan, M. C. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800425 · Cited by 122
Monolithic Dual‐Material 3D Printing of Ionic Skins with Long‐Term Performance Stability
Yin, X., Zhang, Y., Xiao, J., Moorlag, C., & Yang, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904716 · Cited by 114
Fully Printed Silver‐Nanoparticle‐Based Strain Gauges with Record High Sensitivity
Zhang, S., Cai, L., Li, W., Miao, J., Wang, T., Yeom, J., Sepúlveda, N., & Wang, C. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700067 · Cited by 110
Kousiatza, C., Tzetzis, D., & Karalekas, D. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.02.008 · Cited by 109
Tough but self-healing and 3D printable hydrogels for E-skin, E-noses and laser controlled actuators
Wang, Y., Chang, Q., Zhan, R., Xu, K., Wang, Y., Zhang, X., Li, B., Luo, G., Xing, M. M. Q., & Zhong, W. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04248b · Cited by 108
3D Printing Ionogel Auxetic Frameworks for Stretchable Sensors
Wong, J., Gong, A. T., Defnet, P. A., Meabe, L., Beauchamp, B., Sweet, R. M., Sardón, H., Cobb, C. L., & Nelson, A. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900452 · Cited by 104
Chang, Q., Darabi, M. A., Liu, Y., He, Y., Zhong, W., Mequanint, K., Li, B., Lu, F., & Xing, M. M. Q. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06233e · Cited by 98
Zhu, P., Wang, Y., Sheng, M., Wang, Y., Yu, Y., & Deng, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00682f · Cited by 96
3D printable composite dough for stretchable, ultrasensitive and body-patchable strain sensors
Kim, J. Y., Ji, S., Jung, S., Ryu, B.-H., Kim, H., Lee, S. S., Choi, Y., & Jeong, S. (2017) · Nanoscale · doi:10.1039/c7nr01865g · Cited by 95
Dynamic Hydrogels and Polymers as Inks for Three-Dimensional Printing
Heidarian, P., Kouzani, A. Z., Kaynak, A., Paulino, M., & Nasri‐Nasrabadi, B. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00047 · Cited by 92
Davoodi, E., Fayazfar, H. R., Liravi, F., Jabari, E., & Toyserkani, E. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.101016 · Cited by 91
Highly tunable bioadhesion and optics of 3D printable PNIPAm/cellulose nanofibrils hydrogels
Sun, X., Tyagi, P., Agate, S., McCord, M., Lucia, L. A., & Pal, L. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115898 · Cited by 90
Flexible Strain Sensors Fabricated by Meniscus-Guided Printing of Carbon Nanotube–Polymer Composites
Wajahat, M., Lee, S., Kim, J. H., Chang, W. S., Pyo, J., Cho, S. H., & Seol, S. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04073 · Cited by 89
3D‐Printed Coaxial Fibers for Integrated Wearable Sensor Skin
Gao, Y., Yu, G., Shu, T., Chen, Y., Yang, W., Liu, Y., Long, J., Xiong, W. H., & Xuan, F. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900504 · Cited by 82
3D printed stretchable capacitive sensors for highly sensitive tactile and electrochemical sensing
Li, K., Wei, H., Liu, W., Meng, H., Zhang, J., & Yan, C. (2018) · Nanotechnology · doi:10.1088/1361-6528/aaafa5 · Cited by 78
Cholleti, E. R., Stringer, J., Assadian, M., Battmann, V., Bowen, C., & Aw, K. C. (2018) · Sensors · doi:10.3390/s19010042 · Cited by 72
Dynamic Ag–N Bond Enhanced Stretchable Conductor for Transparent and Self-Healing Electronic Skin
Guo, Y., Song, Z., Yu, T., Tan, Q., Zhang, Y., Chen, T., He, C., Jin, L., & Liu, N. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17354 · Cited by 71
Wei, S., Qu, G., Luo, G., Huang, Y., Zhang, H., Zhou, X., Wang, L., Liu, Z., & Kong, T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b00379 · Cited by 66
Self-citationTang, Z., Jia, S., Shi, X., Li, B., & Zhou, C. (2019) · Polymers · doi:10.3390/polym11040666 · Cited by 66
Ren, Y., & Feng, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17371 · Cited by 62
Kwon, S., Kim, S., Kim, I., Hong, Y. K., & Na, S. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800500 · Cited by 61
Additive manufacturing and characterization of a load cell with embedded strain gauges
Stano, G., Nisio, A. D., Lanzolla, A. M. L., & Percoco, G. (2019) · Precision Engineering · doi:10.1016/j.precisioneng.2019.11.019 · Cited by 54
Sekine, T., Gaïtis, A., Sato, J., Miyazawa, K., Muraki, K., Shiwaku, R., Takeda, Y., Matsui, H., Kumaki, D., Santos, F. D. D., et al. (2019) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.8b00088 · Cited by 53
A Sprayed Graphene Pattern-Based Flexible Strain Sensor with High Sensitivity and Fast Response
Xu, W., Yang, T., Qin, F., Gong, D., Du, Y., & Dai, G. (2019) · Sensors · doi:10.3390/s19051077 · Cited by 42
Ko, H., Ratri, M. C., Kim, K., Jung, Y., Tae, G., & Shin, K. (2020) · Scientific Reports · doi:10.1038/s41598-020-64457-8 · Cited by 42
Multi-Material 3D Printed Bendable Smart Sensing Structures
Nassar, H., Ntagios, M., Navaraj, W. T., & Dahiva, R. (2018) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/icsens.2018.8589625 · Cited by 40
Liang, J., Zhao, Z., Tang, Y., Hao, X., Wang, X., & Qiu, J. (2019) · Carbon · doi:10.1016/j.carbon.2019.02.087 · Cited by 38
Optical stereolithography of antifouling zwitterionic hydrogels
Pan, W., Wallin, T. J., Odent, J., Yip, M. C., Mosadegh, B., Shepherd, R. F., & Giannelis, E. P. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb00278b · Cited by 37
Hou, N., & Li, Y. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2941155 · Cited by 37
Lai, T., Fang, C., Liu, C., Zhao, X.-R., Cao, Y., Wu, D., & Li, A. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.02.008 · Cited by 31
Danish, M., & Luo, S. (2019) · Scientific Reports · doi:10.1038/s41598-019-53222-1 · Cited by 14
Cited by
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Liu, H., Du, C., Liao, L., Zhang, H., Zhou, H., Zhou, W., Ren, T., Sun, Z., Lu, Y., Nie, Z., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-31051-7 · Cited by 315
Self-citationA fully hydrophobic ionogel enables highly efficient wearable underwater sensors and communicators
Wei, J., Zheng, Y., & Chen, T. (2021) · Materials Horizons · doi:10.1039/d1mh00998b · Cited by 307
Guo, Y., Wei, X., Gao, S., Yue, W., Li, Y., & Shen, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104288 · Cited by 279
3D-printed PEDOT:PSS for soft robotics
Li, J., Cao, J., Lu, B., & Gu, G. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00587-5 · Cited by 274
Metadata
- Authors
- Liu, H., Zhang, H., Han, W., Lin, H., Li, R., Zhu, J., & Huang, W.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-01-14
- Volume
- 33
- Issue
- 8
- Pages
- e2004782-e2004782
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3120076521
- Cited by
- 441
- References
- 79
- FWCI
- 21.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.