The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Mechanically Robust and UV‐Curable Shape‐Memory Polymers for Digital Light Processing Based 4D Printing
Abstract
4D printing is an emerging fabrication technology that enables 3D printed structures to change configuration over “time” in response to an environmental stimulus. Compared with other soft active materials used for 4D printing, shape‐memory polymers (SMPs) have higher stiffness, and are compatible with various 3D printing technologies. Among them, ultraviolet (UV)‐curable SMPs are compatible with Digital Light Processing (DLP)‐based 3D printing to fabricate SMP‐based structures with complex geometry and high‐resolution. However, UV‐curable SMPs have limitations in terms of mechanical performance, which significantly constrains their application ranges. Here, a mechanically robust and UV‐curable SMP system is reported, which is highly deformable, fatigue resistant, and compatible with DLP‐based 3D printing, to fabricate high‐resolution (up to 2 µm), highly complex 3D structures that exhibit large shape change (up to 1240%) upon heating. More importantly, the developed SMP system exhibits excellent fatigue resistance and can be repeatedly loaded more than 10 000 times. The development of the mechanically robust and UV‐curable SMPs significantly improves the mechanical performance of the SMP‐based 4D printing structures, which allows them to be applied to engineering applications such as aerospace, smart furniture, and soft robots.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Self-citationAdvances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Self-citation3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Self-citationDirect 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Self-citationHighly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
Self-citation
Cited by
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Self-citation4D Printing for Biomedical Applications
Yarali, E., Mirzaali, M. J., Ghalayaniesfahani, A., Accardo, A., Diaz‐Payno, P. J., & Zadpoor, A. A. (2024) · Advanced Materials · doi:10.1002/adma.202402301 · Cited by 257
Research Progress of Shape Memory Polymer and 4D Printing in Biomedical Application
Zhao, W., Yue, C., Liu, L., Liu, Y., & Leng, J. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202201975 · Cited by 183
Metadata
- Authors
- Zhang, B., Li, H., Cheng, J., Ye, H., Sakhaei, A. H., Yuan, C., Rao, P., Zhang, Y., Chen, Z., Wang, R., He, X., Liu, J., Xiao, R., Qu, S., & Ge, Q.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-05-17
- Volume
- 33
- Issue
- 27
- Pages
- e2101298-e2101298
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3160998308
- Cited by
- 330
- References
- 45
- FWCI
- 23.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanically Robust and UV‐Curable Shape‐Memory Polymers for Digital Light Processing Based 4D Printing. https://app.cochat.ai/papers/10.1002/adma.202101298
- The paper
- Zhang, B., Li, H., Cheng, J., Ye, H., Sakhaei, A. H., Yuan, C., Rao, P., Zhang, Y., Chen, Z., Wang, R., He, X., Liu, J., Xiao, R., Qu, S., & Ge, Q. (2021). Mechanically Robust and UV‐Curable Shape‐Memory Polymers for Digital Light Processing Based 4D Printing. Advanced Materials. https://doi.org/10.1002/adma.202101298
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.