The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Mechanically Robust and UV‐Curable Shape‐Memory Polymers for Digital Light Processing Based 4D Printing
Abstract
4D printing is an emerging fabrication technology that enables 3D printed structures to change configuration over “time” in response to an environmental stimulus. Compared with other soft active materials used for 4D printing, shape‐memory polymers (SMPs) have higher stiffness, and are compatible with various 3D printing technologies. Among them, ultraviolet (UV)‐curable SMPs are compatible with Digital Light Processing (DLP)‐based 3D printing to fabricate SMP‐based structures with complex geometry and high‐resolution. However, UV‐curable SMPs have limitations in terms of mechanical performance, which significantly constrains their application ranges. Here, a mechanically robust and UV‐curable SMP system is reported, which is highly deformable, fatigue resistant, and compatible with DLP‐based 3D printing, to fabricate high‐resolution (up to 2 µm), highly complex 3D structures that exhibit large shape change (up to 1240%) upon heating. More importantly, the developed SMP system exhibits excellent fatigue resistance and can be repeatedly loaded more than 10 000 times. The development of the mechanically robust and UV‐curable SMPs significantly improves the mechanical performance of the SMP‐based 4D printing structures, which allows them to be applied to engineering applications such as aerospace, smart furniture, and soft robots.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Self-citationAdvances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Self-citation3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Self-citationDirect 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Self-citationHighly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
Self-citationA Tissue-Like Printed Material
Villar, G., Graham, A. D., & Bayley, H. (2013) · Science · doi:10.1126/science.1229495 · Cited by 613
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Mattia, J., & Painter, P. (2007) · Macromolecules · doi:10.1021/ma0626362 · Cited by 477
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
DiBenedetto, A. T. (1987) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1987.090250914 · Cited by 410
Molecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Self-citation4D printing of high performance shape memory polymer using stereolithography
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Wei, J., & Su, P.-C. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.049 · Cited by 328
4D printing reconfigurable, deployable and mechanically tunable metamaterials
Yang, C., Boorugu, M., Dopp, A., Ren, J., Martin, R., Han, D., Choi, W., & Lee, H. (2019) · Materials Horizons · doi:10.1039/c9mh00302a · Cited by 284
Davidson, E. C., Kotikian, A., Li, S., Aizenberg, J., & Lewis, J. A. (2020) · Advanced Materials · doi:10.1002/adma.201905682 · Cited by 284
4D‐Printed Biodegradable and Remotely Controllable Shape Memory Occlusion Devices
Lin, C., Lv, J., Li, Y., Zhang, F., Li, J., Liu, Y., Liu, L., & Leng, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906569 · Cited by 272
Zhang, Q., Zhang, K., & Hu, G. (2016) · Scientific Reports · doi:10.1038/srep22431 · Cited by 269
A generalized theory for the glass transition temperature of crosslinked and uncrosslinked polymers
Stutz, H., Illers, K. ‐., & Mertes, J. (1990) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1990.090280906 · Cited by 261
High‐Strain Shape‐Memory Polymers
Voit, W., Ware, T., Dasari, R. R., Smith, P., Danz, L., Simon, D., Barlow, S., Marder, S. R., & Gall, K. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901409 · Cited by 247
Evolution of material properties during free radical photopolymerization
Wu, J., Zhao, Z., Hamel, C. M., Mu, X., Kuang, X., Guo, Z., & Qi, H. J. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.11.018 · Cited by 220
Structural multi-colour invisible inks with submicron 4D printing of shape memory polymers
Zhang, W., Wang, H., Wang, H., Chan, J. Y. E., Liu, H., Zhang, B., Zhang, Y.-F., Agarwal, K., Yang, X., Ranganath, A. S., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20300-2 · Cited by 204
Self-citation4D Printing of Shape‐Memory Hydrogels for Soft‐Robotic Functions
Shiblee, M. N. I., Ahmed, K., Kawakami, M., & Furukawa, H. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900071 · Cited by 201
Structural multi-colour invisible inks with submicron 4D printing of shape memory polymers
Zhang, W., Wang, H., Wang, H., Chan, J. Y. E., Liu, H., Zhang, B., Zhang, Y., Agarwal, K., Yang, X., Ranganath, A. S., et al. (2021) · RePEc: Research Papers in Economics · Cited by 194
Self-citationZhang, B., Zhang, W., Zhang, Z., Zhang, Y.-F., Hingorani, H., Liu, Z., Liu, J., & Ge, Q. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00359 · Cited by 190
Self-citation4D printed multi-stable metamaterials with mechanically tunable performance
Tao, R., Xi, L., Wu, W., Li, Y., Liao, B., Liu, L., Leng, J., & Fang, D. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.112663 · Cited by 166
Hydrophilic/Hydrophobic Composite Shape-Shifting Structures
Zhao, Z., Kuang, X., Yuan, C., Qi, H. J., & Fang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02444 · Cited by 152
Self-citationHigh speed 4D printing of shape memory polymers with nanosilica
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Yu, S., Wei, J., & Su, P. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.100515 · Cited by 146
Enhanced multimaterial 4D printing with active hinges
Akbari, S., Sakhaei, A. H., Kowsari, K., Yang, B., Serjouei, A., Yuanfang, Z., & Ge, Q. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aabe63 · Cited by 145
Self-citationMiao, J., Ge, M., Peng, S., Zhong, J., Li, Y., Weng, Z., Wu, L., & Zheng, L. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14145 · Cited by 145
4D printing shape memory polymers for dynamic jewellery and fashionwear
Zarek, M., Layani, M., Eliazar, S., Mansour, N., Cooperstein, I., Shukrun, E., Szlar, A., Cohn, D., & Magdassi, S. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1244085 · Cited by 138
Shape-morphing composites with designed micro-architectures
Rodriguez, J. N., Zhu, C. Y., Duoss, E. B., Wilson, T. S., Spadaccini, C. M., & Lewicki, J. P. (2016) · Scientific Reports · doi:10.1038/srep27933 · Cited by 133
Programmable Deployment of Tensegrity Structures by Stimulus-Responsive Polymers
Liu, K., Wu, J., Paulino, G. H., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-03412-6 · Cited by 124
Digital Light Processing 3D Printing of Triple Shape Memory Polymer for Sequential Shape Shifting
Peng, B., Yang, Y., Gu, K., Amis, E. J., & Cavicchi, K. A. (2019) · ACS Materials Letters · doi:10.1021/acsmaterialslett.9b00262 · Cited by 84
Curing characteristics of shape memory polymers in 3D projection and laser stereolithography
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Su, P., & Wei, J. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1254845 · Cited by 75
Teoh, J. E. M., Zhao, Y., An, J., Chua, C. K., & Liu, Y. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa908a · Cited by 64
Cited by
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Self-citation4D Printing for Biomedical Applications
Yarali, E., Mirzaali, M. J., Ghalayaniesfahani, A., Accardo, A., Diaz‐Payno, P. J., & Zadpoor, A. A. (2024) · Advanced Materials · doi:10.1002/adma.202402301 · Cited by 257
Research Progress of Shape Memory Polymer and 4D Printing in Biomedical Application
Zhao, W., Yue, C., Liu, L., Liu, Y., & Leng, J. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202201975 · Cited by 183
Metadata
- Authors
- Zhang, B., Li, H., Cheng, J., Ye, H., Sakhaei, A. H., Yuan, C., Rao, P., Zhang, Y., Chen, Z., Wang, R., He, X., Liu, J., Xiao, R., Qu, S., & Ge, Q.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-05-17
- Volume
- 33
- Issue
- 27
- Pages
- e2101298-e2101298
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3160998308
- Cited by
- 330
- References
- 45
- FWCI
- 23.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.