The DOI matches its Crossref record; 313 of the 313 references it cites were found in a registry or an index.
Emerging Technologies in Multi‐Material Bioprinting
Open accessAbstract
Bioprinting, within the emerging field of biofabrication, aims at the fabrication of functional biomimetic constructs. Different 3D bioprinting techniques have been adapted to bioprint cell‐laden bioinks. However, single‐material bioprinting techniques oftentimes fail to reproduce the complex compositions and diversity of native tissues. Multi‐material bioprinting as an emerging approach enables the fabrication of heterogeneous multi‐cellular constructs that replicate their host microenvironments better than single‐material approaches. Here, bioprinting modalities are reviewed, their being adapted to multi‐material bioprinting is discussed, and their advantages and challenges, encompassing both custom‐designed and commercially available technologies are analyzed. A perspective of how multi‐material bioprinting opens up new opportunities for tissue engineering, tissue model engineering, therapeutics development, and personalized medicine is offered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–313 of 313
3D‐Printing of Functional Biomedical Microdevices via Light‐ and Extrusion‐Based Approaches
Hwang, H. H., Zhu, W. Z., Victorine, G., Lawrence, N., & Chen, S. (2017) · Small Methods · doi:10.1002/smtd.201700277 · Cited by 139
Thiol–Gelatin–Norbornene Bioink for Laser‐Based High‐Definition Bioprinting
Dobos, A., Hoorick, J. V., Steiger, W., Gruber, P., Marković, M., Andriotis, O. G., Rohatschek, A., Dubruel, P., Thurner, P. J., Vlierberghe, S. V., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900752 · Cited by 139
Rapid 3D Bioprinting of Glioblastoma Model Mimicking Native Biophysical Heterogeneity
Tang, M., Tiwari, S. K., Agrawal, K., Tan, M. L., Dang, J. W., Tam, T., Tian, J., Wan, X., Schimelman, J. B., You, S., et al. (2021) · Small · doi:10.1002/smll.202006050 · Cited by 137
Laser-based 3D bioprinting for spatial and size control of tumor spheroids and embryoid bodies
Kingsley, D. M., Roberge, C. L., Rudkouskaya, A., Faulkner, D. E., Barroso, M., Intes, X., & Corr, D. T. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.02.014 · Cited by 136
Bioprinting a novel glioblastoma tumor model using a fibrin-based bioink for drug screening
Lee, C., Abelseth, E., la Vega, L. D., & Willerth, S. M. (2019) · Materials Today Chemistry · doi:10.1016/j.mtchem.2018.12.005 · Cited by 135
Reid, J. A., Mollica, P. A., Johnson, G. D., Ogle, R. C., Bruno, R. D., & Sachs, P. C. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025017 · Cited by 134
Embedded Multimaterial Extrusion Bioprinting
Rocca, M., Fragasso, A., Liu, W. H., Heinrich, M. A., & Zhang, Y. S. (2017) · SLAS TECHNOLOGY · doi:10.1177/2472630317742071 · Cited by 131
Self-citationMachine Learning-Guided Three-Dimensional Printing of Tissue Engineering Scaffolds
Conev, A., Litsa, E. E., Perez, M. R., Diba, M., Mikos, A. G., & Kavraki, L. E. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2020.0191 · Cited by 131
Freeform, Reconfigurable Embedded Printing of All‐Aqueous 3D Architectures
Luo, G., Yu, Y., Yuan, Y., Chen, X., Liu, Z., & Kong, T. (2019) · Advanced Materials · doi:10.1002/adma.201904631 · Cited by 128
King, S. M., Higgins, J. W., Nino, C., Smith, T. R., Paffenroth, E. H., Fairbairn, C. E., Docuyanan, A., Shah, V., Chen, A. E., Presnell, S. C., et al. (2017) · Frontiers in Physiology · doi:10.3389/fphys.2017.00123 · Cited by 127
High‐Precision Stereolithography of Biomicrofluidic Devices
Kuo, A. P., Bhattacharjee, N., Lee, Y., Castro, K., Kim, Y. T., & Folch, A. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800395 · Cited by 126
Engineering inkjet bioprinting processes toward translational therapies
Angelopoulos, I., Allenby, M. C., Lim, M., & Zamorano, M. (2019) · Biotechnology and Bioengineering · doi:10.1002/bit.27176 · Cited by 126
Nanoscale 3D printing of hydrogels for cellular tissue engineering
You, S., Li, J., Zhu, W. Z., Yu, C., Mei, D., & Chen, S. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00301g · Cited by 125
In vivo and ex vivo methods of growing a liver bud through tissue connection
Yanagi, Y., Nakayama, K., Taguchi, T., Enosawa, S., Tamura, T., Yoshimaru, K., Matsuura, T., Hayashida, M., Kohashi, K., Oda, Y., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-14542-2 · Cited by 119
Liu, B., Li, J., Lei, X., Cheng, P., Song, Y., Gao, Y., Hu, J., Wang, C., Zhang, S., Li, D., et al. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110905 · Cited by 119
Huang, B., Vyas, C., Roberts, I. V., Poutrel, Q.-A., Chiang, W., Blaker, J. J., Huang, Z., & Bártolo, P. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.12.100 · Cited by 118
The waves that make the pattern: a review on acoustic manipulation in biomedical research
Guex, A. G., Marzio, N. D., Eglin, D., Alini, M., & Serra, T. (2021) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100110 · Cited by 117
Costantini, M., Colosi, C., Święszkowski, W., & Barbetta, A. (2018) · Biofabrication · doi:10.1088/1758-5090/aae605 · Cited by 116
3D bioprinting of complex channels within cell-laden hydrogels
Ji, S., Almeida, E., & Güvendiren, M. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.02.038 · Cited by 115
Thomas, A., Orellano, I., Lam, T., Noichl, B. P., Geiger, M., Amler, A.-K., Kreuder, A.-E., Palmer, C., Duda, G. N., Lauster, R., et al. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.09.033 · Cited by 115
Application of a 3D Bioprinted Hepatocellular Carcinoma Cell Model in Antitumor Drug Research
Sun, L., Yang, H., Wang, Y., Zhang, X., Jin, B., Xie, F., Jin, Y., Pang, Y., Zhao, H., Lu, X., et al. (2020) · Frontiers in Oncology · doi:10.3389/fonc.2020.00878 · Cited by 114
Tumor-like lung cancer model based on 3D bioprinting
Wang, X., Zhang, X., Dai, X., Wang, X., Li, X., Diao, J., & Xu, T. (2018) · 3 Biotech · doi:10.1007/s13205-018-1519-1 · Cited by 113
Wang, X., Li, X., Dai, X., Zhang, X., Zhang, J., Xu, T., & Lan, Q. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.07.042 · Cited by 110
An open-source handheld extruder loaded with pore-forming bioink for in situ wound dressing
Ying, G., Manríquez, J., Wu, D., Zhang, J., Jiang, N., Maharjan, S., Medina, D. H. H., & Zhang, Y. S. (2020) · Materials Today Bio · doi:10.1016/j.mtbio.2020.100074 · Cited by 108
Self-citationTissue engineering of retina through high resolution 3-dimensional inkjet bioprinting
Masaeli, E., Forster, V., Picaud, S. A., Karamali, F., Nasr‐Esfahani, M. H., & Marquette, C. A. (2019) · Biofabrication · doi:10.1088/1758-5090/ab4a20 · Cited by 107
An acoustofluidic device for efficient mixing over a wide range of flow rates
Bachman, H., Chen, C., Rufo, J., Zhao, S., Yang, S., Tian, Z., Nama, N., Huang, P., & Huang, T. J. (2020) · Lab on a Chip · doi:10.1039/c9lc01171d · Cited by 107
Jiang, T., Munguia-Lopez, J. G., Gu, K., Bavoux, M. M., Flores-Torres, S., Kort-Mascort, J., Grant, J., Vijayakumar, S., De Leon-Rodriguez, A., Ehrlicher, A. J., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab3a5c · Cited by 106
Hsiao, S.-H., & Hsu, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08362 · Cited by 103
The emerging role of microfluidics in multi-material 3D bioprinting
Richard, C., Neild, A., & Cadarso, V. J. (2020) · Lab on a Chip · doi:10.1039/c9lc01184f · Cited by 103
Cao, Y. L., Yang, S., Zhao, D., Li, Y., Cheong, S., Han, D., & Li, Q. (2020) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2020.01.004 · Cited by 101
Schwab, A., Hélary, C., Richards, R. G., Alini, M., Eglin, D., & D’Este, M. (2020) · Materials Today Bio · doi:10.1016/j.mtbio.2020.100058 · Cited by 101
Chua, C. K., & Yeong, W. Y. (2014) · WORLD SCIENTIFIC eBooks · doi:10.1142/9193 · Cited by 100
3D Bioprinted Vascularized Tumour for Drug Testing
Han, S., Kim, S., Chen, Z., Shin, H. K., Lee, S.-Y., Moon, H. E., Paek, S. H., & Park, S. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21082993 · Cited by 100
Design Molecular Topology for Wet–Dry Adhesion
Yang, J., Bai, R., Li, J., Yang, C., Yao, X., Liu, Q., Vlassak, J. J., Mooney, D. J., & Suo, Z. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b07522 · Cited by 98
Utama, R. H., Atapattu, L., O’Mahony, A. P., Fife, C. M., Baek, J., Allard, T., O'Mahony, K. J., Ribeiro, J. C. C., Gaus, K., Kavallaris, M., et al. (2020) · iScience · doi:10.1016/j.isci.2020.101621 · Cited by 98
Three-Dimensional Bioprinting Strategies for Tissue EngineeringPreprint
Zhang, Y. S., Öklü, R., Dokmeci, M. R., & Khademhosseini, A. (2017) · Cold Spring Harbor Perspectives in Medicine · doi:10.1101/cshperspect.a025718 · Cited by 97
Self-citationPatient-specific meniscus prototype based on 3D bioprinting of human cell-laden scaffold
Filardo, G., Petretta, M., Cavallo, C., Roseti, L., Durante, S., Albisinni, U., & Grigolo, B. (2019) · Bone and Joint Research · doi:10.1302/2046-3758.82.bjr-2018-0134.r1 · Cited by 95
Triggered Release from Cellulose Microparticles Inspired by Wood Degradation by Fungi
Qu, Q., Zhang, J., Chen, X., Ravanbakhsh, H., Tang, G., Xiong, R., Manshian, B. B., Soenen, S. J., Sauvage, F., Braeckmans, K., et al. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c07514 · Cited by 95
Self-citationZhang, J., Chen, F., He, Z., Ma, Y., Uchiyama, K., & Lin, J. (2016) · The Analyst · doi:10.1039/c6an00395h · Cited by 94
Chávez-Madero, C., Derby, M. D. D. L., Samandari, M., Ceballos‐González, C. F., Bolívar‐Monsalve, E. J., Mendoza-Buenrostro, C., Holmberg, S., Garza-Flores, N. A., Almajhadi, M. A., González‐Gamboa, I., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab84cc · Cited by 93
Self-citationProspects for 3D bioprinting of organoids
Rawal, P., Tripathi, D. M., Ramakrishna, S., & Kaur, S. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00124-1 · Cited by 92
LIFT-bioprinting, is it worth it?
Antoshin, A. A., Churbanov, S., Минаев, Н. В., Zhang, D., Zhang, Y., Shpichka, A. I., & Timashev, P. S. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00052 · Cited by 90
Self-citationFrom 3D to 4D printing—Design, material and fabrication for multi-functional multi-materials
Khare, V., Sonkaria, S., Lee, G.-Y., Ahn, S.-H., & Chu, W.-S. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0035-9 · Cited by 88
Controlling cellular organization in bioprinting through designed 3D microcompartmentalization
Samandari, M., Alipanah, F., Majidzadeh‐A, K., Álvarez, M. M., Santiago, G. T., & Tamayol, A. (2021) · Applied Physics Reviews · doi:10.1063/5.0040732 · Cited by 88
Alarçın, E., Lee, T. Y., Karuthedom, S., Mohammadi, M., Brennan, M. Á., Lee, D. H., Marrella, A., Zhang, J. C., Syla, D., Zhang, Y. S., et al. (2018) · Biomaterials Science · doi:10.1039/c8bm00293b · Cited by 87
Self-citationSinha, R., Cámara-Torres, M., Scopece, P., Falzacappa, E. V., Patelli, A., Moroni, L., & Mota, C. (2021) · Nature Communications · doi:10.1038/s41467-020-20865-y · Cited by 87
Pre-set extrusion bioprinting for multiscale heterogeneous tissue structure fabrication
Kang, D., Ahn, G., Kim, D., Kang, H., Yun, S., Yun, W., Shim, J., & Jin, S. (2018) · Biofabrication · doi:10.1088/1758-5090/aac70b · Cited by 86
Multiscale 3D Bioprinting by Nozzle‐Free Acoustic Droplet Ejection
Jentsch, S., Nasehi, R., Kuckelkorn, C., Gundert, B., Aveic, S., & Fischer, H. (2021) · Small Methods · doi:10.1002/smtd.202000971 · Cited by 86
Chansoria, P., Narayanan, L. K., Schuchard, K. G., & Shirwaiker, R. A. (2019) · Biofabrication · doi:10.1088/1758-5090/ab15cf · Cited by 85
Triggered micropore-forming bioprinting of porous viscoelastic hydrogels
Bao, G., Jiang, T., Ravanbakhsh, H., Reyes, A., Ma, Z., Strong, M., Wang, H., Kinsella, J. M., Li, J., & Mongeau, L. (2020) · Materials Horizons · doi:10.1039/d0mh00813c · Cited by 85
Self-citationShi, L., Hu, Y., Ullah, M. W., Ullah, I., Ou, H., Zhang, W., Liming, X., & Zhang, X. (2019) · Biofabrication · doi:10.1088/1758-5090/ab15a9 · Cited by 83
High‐throughput 3D bioprinting of corneal stromal equivalents
Kutlehria, S., Dinh, T. C., Bagde, A., Patel, N., Gebeyehu, A., & Singh, M. S. (2020) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34628 · Cited by 83
Nam, H., Jeong, H., Jo, Y., Lee, J. Y., Ha, D., Kim, J. H., Chung, J. H., Cho, Y., Cho, D., Lee, S., et al. (2020) · Scientific Reports · doi:10.1038/s41598-020-64049-6 · Cited by 83
Solis, L. H., Ayala-Marin, Y. M., Portillo, S., Varela-Ramírez, A., Aguilera, R. J., & Boland, T. (2019) · Biofabrication · doi:10.1088/1758-5090/ab25f9 · Cited by 82
Hybrid 3D Printing of Synthetic and Cell‐Laden Bioinks for Shape Retaining Soft Tissue Grafts
Belleghem, S. M. V., Torres, L., Santoro, M., Mahadik, B. P., Wolfand, A., Kofinas, P., & Fisher, J. P. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201907145 · Cited by 82
Coaxial Extrusion of Tubular Tissue Constructs Using a Gelatin/GelMA Blend Bioink
Wang, Y., Kankala, R. K., Zhu, K., Wang, S., Zhang, Y. S., & Chen, A. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00926 · Cited by 81
Self-citationMimicking Human Pathophysiology in Organ‐on‐Chip Devices
Yeşil-Çeliktaş, Ö., Hassan, S., Miri, A. K., Maharjan, S., Al‐kharboosh, R., Quiñones‐Hinojosa, A., & Zhang, Y. S. (2018) · Advanced Biosystems · doi:10.1002/adbi.201800109 · Cited by 80
Self-citationBioinspired tough gel sheath for robust and versatile surface functionalization
Ma, Z., Yang, Z., Gao, Q., Bao, G., Valiei, A., Yang, F., Huo, R., Wang, C., Song, G., Ma, D., et al. (2021) · Science Advances · doi:10.1126/sciadv.abc3012 · Cited by 80
Self-citationla Vega, L. D., Gómez, D. A. R., Abelseth, E., Abelseth, L., da Silva, V. A., & Willerth, S. M. (2018) · Applied Sciences · doi:10.3390/app8122414 · Cited by 79
Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing
Serex, L., Bertsch, A., & Renaud, P. (2018) · Micromachines · doi:10.3390/mi9020086 · Cited by 78
Xie, R., Liang, Z., Ai, Y., Zheng, W.-C., Xiong, J., Xu, P., Liu, Y., Ding, M., Gao, J., Wang, J., et al. (2020) · Nature Protocols · doi:10.1038/s41596-020-00442-9 · Cited by 71
Tunable Cross-Linking and Adhesion of Gelatin Hydrogels via Bioorthogonal Click Chemistry
Negrini, N. C., Volponi, A. A., Sharpe, P. T., & Celiz, A. D. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00136 · Cited by 68
Modelling glioma invasion using 3D bioprinting and scaffold-free 3D culture
van Pel, D. M., Harada, K., Song, D., Naus, C. C. G., & Sin, W. C. (2018) · Journal of Cell Communication and Signaling · doi:10.1007/s12079-018-0469-z · Cited by 66
Active Mixing of Disparate Inks for Multimaterial 3D Printing
Ortega, J. M., Golobic, M., Sain, J. D., Lenhardt, J. M., Wu, A. S., Fisher, S., Pérez, L. X. P., Jaycox, A. W., Smay, J. E., Duoss, E. B., et al. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800717 · Cited by 65
Sound-induced morphogenesis of multicellular systems for rapid orchestration of vascular networks
Petta, D., Basoli, V., Pellicciotta, D., Tognato, R., Barcik, J. P., Arrigoni, C., Bella, E. D., Armiento, A. R., Candrian, C., Richards, R. G., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/abbb9c · Cited by 65
3D Immunocompetent Organ‐on‐a‐Chip Models
Maharjan, S., Cecen, B., & Zhang, Y. S. (2020) · Small Methods · doi:10.1002/smtd.202000235 · Cited by 62
Self-citationHedegaard, C. L., & Mata, Á. (2020) · Biofabrication · doi:10.1088/1758-5090/ab84cb · Cited by 61
A desktop multi-material 3D bio-printing system with open-source hardware and software
Lee, J., Kim, K. E., Bang, S., Noh, I., & Lee, C. (2017) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-017-0072-x · Cited by 59
Qi, D., Wu, S., Kuss, M. A., Shi, W., Chung, S., Deegan, P. T., Kamenskiy, A. V., He, Y., & Duan, B. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.044 · Cited by 57
Rapid 3D BioPrinting of a human iPSC-derived cardiac micro-tissue for high-throughput drug testing
Miller, K. L., Xiang, Y., Yu, C., Pustelnik, J., Wu, J. C., Ma, X., Matsui, T., Imahashi, K., & Chen, S. (2021) · Organs-on-a-Chip · doi:10.1016/j.ooc.2021.100007 · Cited by 57
Wang, Z., Jin, X., Tian, Z., Ménard, F., Holzman, J. F., & Kim, K. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701249 · Cited by 56
Dickman, C. T., Russo, V., Thain, K. R., Pan, S., Beyer, S., Walus, K., Getsios, S., Mohamed, T., & Wadsworth, S. J. (2019) · The FASEB Journal · doi:10.1096/fj.201901063rr · Cited by 56
High-Throughput and Continuous Chaotic Bioprinting of Spatially Controlled Bacterial Microcosms
Ceballos‐González, C. F., Bolívar‐Monsalve, E. J., Quevedo‐Moreno, D. A., Lam‐Aguilar, L. L., Borrayo-Montaño, K. I., León, J. F. Y.-D., Zhang, Y. S., Álvarez, M. M., & Santiago, G. T. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01646 · Cited by 55
Self-citationDrop‐On‐Drop Multimaterial 3D Bioprinting Realized by Peroxidase‐Mediated Cross‐Linking
Sakai, S., Ueda, K., Gantumur, E., Taya, M., & Nakamura, M. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700534 · Cited by 53
3D Bioprinting: The Emergence of Programmable Biodesign
Carreira, S. C., Begum, R., & Perriman, A. W. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900554 · Cited by 53
Wang, X., Wei, Z., Baysah, C. Z., Zheng, M., & Xing, J. (2019) · RSC Advances · doi:10.1039/c9ra05645a · Cited by 51
Improving Bioprinted Volumetric Tumor Microenvironments In Vitro
Li, J., Parra‐Cantu, C., Wang, Z., & Zhang, Y. S. (2020) · Trends in cancer · doi:10.1016/j.trecan.2020.06.002 · Cited by 51
Self-citationComposite Inks for Extrusion Printing of Biological and Biomedical Constructs
Ravanbakhsh, H., Bao, G., Luo, Z., Mongeau, L., & Zhang, Y. S. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01158 · Cited by 51
Self-citationKim, Y. T., Castro, K., Bhattacharjee, N., & Folch, A. (2018) · Micromachines · doi:10.3390/mi9030125 · Cited by 50
The future of skin toxicology testing–three-dimensional bioprinting meets microfluidics
Ng, W. L., & Yeong, W. Y. (2019) · International Journal of Bioprinting · doi:10.18063/ijb.v5i2.1.237 · Cited by 48
O’Connell, C. D., Konate, S., Onofrillo, C., Kapsa, R. M. I., Baker, C., Duchi, S., Eekel, T., Yue, Z., Beirne, S., Barnsley, G., et al. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00087 · Cited by 45
Dıkıcı, S., Claeyssens, F., & MacNeil, S. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00191 · Cited by 44
Characterizing the Process Physics of Ultrasound-Assisted Bioprinting
Chansoria, P., & Shirwaiker, R. A. (2019) · Scientific Reports · doi:10.1038/s41598-019-50449-w · Cited by 42
The potential of microfluidics-enhanced extrusion bioprinting
du Chatinier, D. N., Figler, K. P., Agrawal, P. S., Liu, W. H., & Zhang, Y. S. (2021) · Biomicrofluidics · doi:10.1063/5.0033280 · Cited by 41
Self-citationMulticomponent bioprinting of heterogeneous hydrogel constructs based on microfluidic printheads
Feng, F., He, J., Li, J., Mao, M., & Li, D. (2019) · International Journal of Bioprinting · doi:10.18063/ijb.v5i2.202 · Cited by 39
3D bioprinting of oligo(poly[ethylene glycol] fumarate) for bone and nerve tissue engineering
Liu, X., Gaihre, B., George, M. N., Miller, A. L., Xu, H., Waletzki, B. E., & Lu, L. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37002 · Cited by 36
Engineering in vitro human tissue models through bio-design and manufacturing
Zhang, Y. S., & Khademhosseini, A. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00080-w · Cited by 36
Self-citationReeser, K., & Doiron, A. L. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2019.0058 · Cited by 34
An Alternative Direct Compound Dispensing Method Using the HP D300 Digital Dispenser
Jones, R. E., Zheng, W., McKew, J. C., & Chen, C. Z. (2013) · SLAS TECHNOLOGY · doi:10.1177/2211068213491094 · Cited by 33
Cameron, T., Naseri, E., MacCallum, B., & Ahmadi, A. (2020) · Micromachines · doi:10.3390/mi11050459 · Cited by 33
Thermofluidic heat exchangers for actuation of transcription in artificial tissues
Corbett, D. C., Fabyan, W. B., Grigoryan, B., O’Connor, C. E., Johansson, F., Batalov, I., Regier, M. C., DeForest, C. A., Miller, J. S., & Stevens, K. R. (2020) · Science Advances · doi:10.1126/sciadv.abb9062 · Cited by 33
Model-based data analysis of tissue growth in thin 3D printed scaffolds
Browning, A. P., Maclaren, O. J., Buenzli, P. R., Lanaro, M., Allenby, M. C., Woodruff, M. A., & Simpson, M. J. (2021) · Journal of Theoretical Biology · doi:10.1016/j.jtbi.2021.110852 · Cited by 30
Pagès, E., Rémy, M., Kériquel, V., Correa, M. M., Guillotin, B., & Guillemot, F. (2015) · Journal of Nanotechnology in Engineering and Medicine · doi:10.1115/1.4031217 · Cited by 29
Larsen, E., Larsen, N. B., Almdal, K., Larsen, E., Larsen, N. B., & Almdal, K. (2016) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24007 · Cited by 28
Ionotronic Tough Adhesives with Intrinsic Multifunctionality
Bao, G., Huo, R., Ma, Z., Strong, M., Valiei, A., Jiang, S., Liu, S., Mongeau, L., & Li, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c09231 · Cited by 26
Self-citationYipeng, J., Xu, Y., Yuanyi, W., Jilei, S., Jiaxiang, G., Jiangping, G., & Yang, Y. (2017) · Frontiers in Physiology · doi:10.3389/fphys.2017.00534 · Cited by 25
Three-dimensional bioprinting healthy and diseased models of the brain tissue using stem cells
Walus, K., Beyer, S., & Willerth, S. M. (2020) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2020.03.002 · Cited by 22
Shapiro, J. M., Drinkwater, B. W., Perriman, A. W., & Fraser, M. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000689 · Cited by 22
Enhancing cell packing in buckyballs by acoustofluidic activation
Ren, T., Steiger, W., Chen, P., Ovsianikov, A., & Demirci, U. (2020) · Biofabrication · doi:10.1088/1758-5090/ab76d9 · Cited by 19
Inkjet Printing for Biofabrication
Li, X., Chen, J., Liu, B., Wang, X., Ren, D., & Xu, T. (2018) · Springer eBooks · doi:10.1007/978-3-319-45444-3_26 · Cited by 19
Design and Implementation of Novel Multifunctional 3D Bioprinter
Hesuani, Y. D., Pereira, F. D. A. S., Parfenov, V. A., Koudan, E. V., Mitryashkin, A., Replyanski, N., Kasyanov, V. A., Knyazeva, A. D., Bulanova, E. A., & Mironov, V. A. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0040 · Cited by 18
The Research on Multi-Material 3D Vascularized Network Integrated Printing Technology
Yang, S., Tang, H., Feng, C.-M., Shi, J., & Yang, J. (2020) · Micromachines · doi:10.3390/mi11030237 · Cited by 17
Multinozzle Multichannel Temperature Deposition System for Construction of a Blood Vessel
Liu, H., Zhou, H., Lan, H., Liu, F., & Wang, X. (2017) · SLAS TECHNOLOGY · doi:10.1177/2472630317712221 · Cited by 16
Gravity measured with record precision
Schlamminger, S. (2018) · Nature · doi:10.1038/d41586-018-06028-6 · Cited by 15
Hwang, H. H., Zhu, W. Z., Victorine, G., et al. (2018) · Small Methods · doi:10.1002/smtd.201870021 · Cited by 11
Biofabrication in Tissue Engineering
Bao, G. (2020) · Springer eBooks · doi:10.1007/978-3-030-34471-9_12 · Cited by 11
Self-citationPereira, F. D. A. S., Parfenov, V. A., Khesuani, Y. D., Ovsianikov, A., & Mironov, V. A. (2018) · Springer eBooks · doi:10.1007/978-3-319-45444-3_12 · Cited by 11
Lakes, R. S. (2002) · CRC Press eBooks · doi:10.1201/9781420040036.ch4 · Cited by 10
Burdis, R., & Kelly, D. J. (2019) · Springer eBooks · doi:10.1007/978-3-030-24532-0_8 · Cited by 7
Rapid prototyping of complex tissues with laser-assisted bioprinting (LAB)
Guillotin, B., Catros, S., Kériquel, V., Souquet, A., Fontaine, A., Rémy, M., Fricain, J., & Guillemot, F. (2014) · Elsevier eBooks · doi:10.1016/b978-0-08-102663-2.00007-1 · Cited by 4
Bioprinting Using Aqueous Two-Phase System
Leung, B. M., Labuz, J. M., Moraes, C., & Takayama, S. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00009-8 · Cited by 3
Design of 3D bioprinted articular cartilage of MSCs-loaded for osteochondral injuries
Jiménez, G., Antich, C., Marchal, J. A., Baena, J., Sabata, R., & Galvez, P. (2017) · Cytotherapy · doi:10.1016/j.jcyt.2017.02.056 · Cited by 3
Is 3D printing the future of health care?
Thazhathukunnel, T., Chow, A., & Amirfar, V. A. (2015) · Pharmacy Today · doi:10.1016/s1042-0991(15)30303-0 · Cited by 2
Research works printed but not linked: 26
- Zhang Y. S., 2018, Perspect. Med., 8
- 10.1126/sciadv.aas8652 · doi:10.1126/sciadv.aas8652
- 10.1039/C9LC00419J · doi:10.1039/c9lc00419j
- 10.1016/j.msec.2019.109861 · DOI
- 10.1038/s41598-020-62443-8 · doi:10.1038/s41598-020-62443-8
- 10.1002/smll.201906402 · doi:10.1002/smll.201906402
- 10.1002/adem.201900147 · DOI
- 10.1039/C6LC00636A · doi:10.1039/c6lc00636a
- 10.1039/C9LC00546C · DOI
- 10.1002/adma.201904209 · DOI · Paper page
- Zhou C., 2011, Annu. Solid Freeform Fabr. Symp., 3, 65
- 10.1108/RPJ-07-2017-0144 · doi:10.1108/rpj-07-2017-0144
- 10.2351/1.5096106 · doi:10.2351/1.5096106
- 10.1002/9783527805105 · doi:10.1002/9783527805105
- 10.1038/nbt.3413 · DOI · Paper page
- 10.1101/2021.03.25.436898 · doi:10.1101/2021.03.25.436898
- 10.1109/MSPEC.2019.8678515 · doi:10.1109/mspec.2019.8678515
- 10.1089/ten.tea.2020.0191 · DOI
- 10.1038/s41598-018-21681-7 · doi:10.1038/s41598-018-21681-7
- 10.1002/advs.202001854 · doi:10.1002/advs.202001854
- 10.1002/advs.201900344 · DOI · Paper page
- Pashazadeh A., 2019, Trans. Addit. Manuf. Meets Med., 1
- 10.1089/ten.tec.2017.0056 · doi:10.1089/ten.tec.2017.0056
- Liu X., 2020, J. Biomed. Mater. Res., Part A
- 10.1101/2020.04.06.028548 · doi:10.1101/2020.04.06.028548
- C. Kanani Cell printing: a novel method to seed cells onto biological scaffolds M.Sc. Thesis Worcester Polytechnic Institute2012.
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Self-citationBone Tissue Engineering Scaffolds: Function of Multi‐Material Hierarchically Structured Scaffolds
Koushik, T. M., Miller, C. M., & Antunes, E. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202202766 · Cited by 359
Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review
Fatimi, A., Okoro, O. V., Podstawczyk, D., Siminska-Stanny, J., & Shavandi, A. (2022) · Gels · doi:10.3390/gels8030179 · Cited by 276
In Situ 3D Bioprinting Living Photosynthetic Scaffolds for Autotrophic Wound Healing
Wang, X., Yang, C., Yu, Y., & Zhao, Y. (2022) · Research · doi:10.34133/2022/9794745 · Cited by 143
Metadata
- Authors
- Ravanbakhsh, H., Karamzadeh, V., Bao, G., Mongeau, L., Juncker, D., & Zhang, Y. S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-10
- Volume
- 33
- Issue
- 49
- Pages
- e2104730-e2104730
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3204873255
- Cited by
- 266
- References
- 313
- FWCI
- 10.57
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- Funders
- National Institutes of Health (R01DC018577, R01DC005788, R01DC014461, R21EB025270, R21EB026175, R00CA201603, R01EB028143, R01HL153857, R21EB030257)
- National Science Foundation (CBET‐EBMS‐1936105)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.