The DOI matches its Crossref record; 313 of the 313 references it cites were found in a registry or an index.
Emerging Technologies in Multi‐Material Bioprinting
Open accessAbstract
Bioprinting, within the emerging field of biofabrication, aims at the fabrication of functional biomimetic constructs. Different 3D bioprinting techniques have been adapted to bioprint cell‐laden bioinks. However, single‐material bioprinting techniques oftentimes fail to reproduce the complex compositions and diversity of native tissues. Multi‐material bioprinting as an emerging approach enables the fabrication of heterogeneous multi‐cellular constructs that replicate their host microenvironments better than single‐material approaches. Here, bioprinting modalities are reviewed, their being adapted to multi‐material bioprinting is discussed, and their advantages and challenges, encompassing both custom‐designed and commercially available technologies are analyzed. A perspective of how multi‐material bioprinting opens up new opportunities for tissue engineering, tissue model engineering, therapeutics development, and personalized medicine is offered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultrastructural Characterization of the Lower Motor System in a Mouse Model of Krabbe Disease
Cappello, V., Marchetti, L., Parlanti, P., Landi, S., Tonazzini, I., Cecchini, M., Piazza, V., & Gemmi, M. (2016) · Scientific Reports · doi:10.1038/s41598-016-0001-8 · Cited by 13,097
Re-epithelialization and immune cell behaviour in an ex vivo human skin model
Rakita, A., Nikolić, N., Mildner, M., Matiasek, J., & Elbe-Bürger, A. (2020) · Scientific Reports · doi:10.1038/s41598-019-56847-4 · Cited by 8,228
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Bhatia, S. N., & Ingber, D. E. (2014) · Nature Biotechnology · doi:10.1038/nbt.2989 · Cited by 3,305
Modeling Development and Disease with Organoids
Clevers, H. (2016) · Cell · doi:10.1016/j.cell.2016.05.082 · Cited by 3,196
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Ranade, V. V. (2009) · American Journal of Therapeutics · doi:10.1097/mjt.0b013e31817c941f · Cited by 2,775
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
From 3D cell culture to organs-on-chips
Huh, D., Hamilton, G. A., & Ingber, D. E. (2011) · Trends in Cell Biology · doi:10.1016/j.tcb.2011.09.005 · Cited by 1,834
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Hofer, M., & Lutolf, M. P. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00279-y · Cited by 1,184
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T. (2019) · Advanced Science · doi:10.1002/advs.201900344 · Cited by 1,042
Hydrogel Adhesion: A Supramolecular Synergy of Chemistry, Topology, and Mechanics
Yang, J., Bai, R., Chen, B., & Suo, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201901693 · Cited by 1,033
Additive manufacturing of multi-material structures
Bandyopadhyay, A., & Heer, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.001 · Cited by 1,029
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Zhang, W., Wang, R., Sun, Z., Zhu, X., Zhao, Q., Zhang, T., Cholewinski, A., Yang, F. (., Zhao, B., Pinnaratip, R., et al. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00285e · Cited by 970
Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Skylar-Scott, M. A., Uzel, S. G. M., Nam, L. L., Ahrens, J. H., Truby, R. L., Damaraju, S., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aaw2459 · Cited by 943
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Self-citationDeterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Ma, X., Qu, X., Zhu, W., Li, Y.-S., Yuan, S., Zhang, H., Liu, J., Wang, P., Lai, C. S. E., Zanella, F., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1524510113 · Cited by 872
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
Nam, S., & Mooney, D. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00798 · Cited by 764
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Metal deposition from a supported metal film using an excimer laser
Bohandy, J., Kim, B. F., & Adrian, F. J. (1986) · Journal of Applied Physics · doi:10.1063/1.337287 · Cited by 686
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Self-citationJang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Writing in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Xing, J.-F., Zheng, M.-L., & Duan, X.-M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00278h · Cited by 628
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
Self-citationSkin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 567
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Three-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Xolography for linear volumetric 3D printing
Regehly, M., Garmshausen, Y., Reuter, M., König, N. F., Israel, E., Kelly, D. P., Chou, C.-Y., Koch, K., Asfari, B., & Hecht, S. (2020) · Nature · doi:10.1038/s41586-020-3029-7 · Cited by 527
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
3D printing of highly stretchable hydrogel with diverse UV curable polymers
Ge, Q., Chen, Z., Cheng, J., Zhang, B., Zhang, Y.-F., Li, H., He, X., Yuan, C., Liu, J., Magdassi, S., et al. (2021) · Science Advances · doi:10.1126/sciadv.aba4261 · Cited by 518
Self-citationExtrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
Self-citationCreating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Wang, Q., Jackson, J. A., Ge, Q., Hopkins, J. B., Spadaccini, C. M., & Fang, N. X. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.175901 · Cited by 481
Laser Printing of Skin Cells and Human Stem Cells
Koch, L., Kuhn, S., Sorg, H., Gruene, M., Schlie, S., Gaebel, R., Polchow, B., Reimers, K., Stoelting, S., Ma, N., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0397 · Cited by 476
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
High-throughput laser printing of cells and biomaterials for tissue engineering
Guillemot, F., Souquet, A., Catros, S., Guillotin, B., Lopez, J., Faucon, M., Pippenger, B., Bareille, R., Rémy, M., Bellance, S., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.029 · Cited by 475
Daly, A. C., Davidson, M. D., & Burdick, J. A. (2021) · Nature Communications · doi:10.1038/s41467-021-21029-2 · Cited by 470
Recapitulating macro-scale tissue self-organization through organoid bioprinting
Brassard, J. A., Nikolaev, M., Hübscher, T., Hofer, M., & Lutolf, M. P. (2021) · Nature Materials · doi:10.1038/s41563-020-00803-5 · Cited by 469
Mixing in microfluidic devices and enhancement methods
Ward, K., & Fan, Z. H. (2015) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/25/9/094001 · Cited by 453
Keriquel, V., Oliveira, H., Rémy, M., Ziane, S., Delmond, S., Rousseau, B., Rey, S., Catros, S., Amédée, J., Guillemot, F., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-01914-x · Cited by 447
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R., Stewart, E. M., in het Panhuis, M., Romero-Ortega, M., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 445
Projection micro stereolithography based 3D printing and its applications
Ge, Q., Li, Z., Wang, Z., Kowsari, K., Zhang, W., He, X., Zhou, J., & Fang, N. X. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab8d9a · Cited by 444
Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels
Gong, H., Bickham, B. P., Woolley, A. T., & Nordin, G. P. (2017) · Lab on a Chip · doi:10.1039/c7lc00644f · Cited by 443
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Self-citationCellular extrusion bioprinting improves kidney organoid reproducibility and conformation
Lawlor, K. T., Vanslambrouck, J. M., Higgins, J. W., Chambon, A., Bishard, K., Arndt, D., Er, P. X., Wilson, S. B., Howden, S. E., Tan, K. S., et al. (2021) · Nature Materials · doi:10.1038/s41563-020-00853-9 · Cited by 435
Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting
Miri, A. K., Nieto, D., Iglesias, L., Goodarzi Hosseinabadi, H., Maharjan, S., Ruiz‐Esparza, G. U., Khoshakhlagh, P., Manbachi, A., Dokmeci, M. R., Chen, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800242 · Cited by 431
Self-citationRapid Continuous Multimaterial Extrusion Bioprinting
Liu, W., Zhang, Y. S., Heinrich, M. A., De Ferrari, F., Jang, H. L., Bakht, S. M., Alvarez, M. M., Yang, J., Li, Y., Trujillo‐de Santiago, G., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604630 · Cited by 424
Self-citationTakebe, T., & Wells, J. M. (2019) · Science · doi:10.1126/science.aaw7567 · Cited by 417
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Ma, X., Liu, J., Zhu, W., Tang, M., Lawrence, N., Yu, C., Gou, M., & Chen, S. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.06.011 · Cited by 401
Emerging aqueous two-phase systems: from fundamentals of interfaces to biomedical applications
Chao, Y., & Shum, H. C. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00466a · Cited by 397
Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs
Pedde, R. D., Mirani, B., Navaei, A., Styan, T., Wong, S., Mehrali, M., Thakur, A., Mohtaram, N. K., Bayati, A., Dolatshahi‐Pirouz, A., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606061 · Cited by 388
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
Self-citationAdvances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G., Lim, K., & Woodfield, T. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901648 · Cited by 383
Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
Organ-on-a-chip platforms for studying drug delivery systems
Bhise, N. S., Ribas, J., Manoharan, V., Zhang, Y. S., Polini, A., Massa, S., Dokmeci, M. R., & Khademhosseini, A. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.05.004 · Cited by 381
Self-citationA New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks
Yuk, H., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704028 · Cited by 381
Nguyen, D. G., Funk, J., Robbins, J. B., Crogan-Grundy, C., Presnell, S. C., Singer, T., & Roth, A. B. (2016) · PLOS ONE · doi:10.1371/journal.pone.0158674 · Cited by 379
A 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M., Seol, Y.-J., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
Arcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364
Lee, H., & Cho, D.-W. (2016) · Lab on a Chip · doi:10.1039/c6lc00450d · Cited by 363
Bioprinting for cancer research
Knowlton, S., Onal, S., Yu, C. H., Zhao, J. J., & Tasoglu, S. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.06.007 · Cited by 361
Laser‐Induced Forward Transfer: Fundamentals and Applications
Serra, P., & Piqué, A. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800099 · Cited by 358
3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity
Poldervaart, M. T., Goversen, B., de Ruijter, M., Abbadessa, A., Melchels, F. P. W., Öner, F. C., Dhert, W. J. A., Vermonden, T., & Alblas, J. (2017) · PLOS ONE · doi:10.1371/journal.pone.0177628 · Cited by 357
Zhu, Z., Ng, D. W. H., Park, H. S., & McAlpine, M. C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00235-2 · Cited by 348
Multimaterial actinic spatial control 3D and 4D printing
Schwartz, J. J., & Boydston, A. J. (2019) · Nature Communications · doi:10.1038/s41467-019-08639-7 · Cited by 343
Lee, V. K., Lanzi, A. M., Ngo, H., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-014-0340-0 · Cited by 342
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
Gao, G., Yonezawa, T., Hubbell, K., Dai, G., & Cui, X. (2015) · Biotechnology Journal · doi:10.1002/biot.201400635 · Cited by 340
Gao, G., Lee, J. H., Jang, J., Lee, D. H., Kong, J., Kim, B. S., Choi, Y., Jang, W. B., Hong, Y. J., Kwon, S., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700798 · Cited by 336
Costantini, M., Testa, S., Mozetic, P., Barbetta, A., Fuoco, C., Fornetti, E., Tamiro, F., Bernardini, S., Jaroszewicz, J., Święszkowski, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.026 · Cited by 330
Bhattacharjee, N., Parra‐Cabrera, C., Kim, Y. T., Kuo, A. P., & Folch, A. (2018) · Advanced Materials · doi:10.1002/adma.201800001 · Cited by 322
3D‐Bioprinted Mini‐Brain: A Glioblastoma Model to Study Cellular Interactions and Therapeutics
Heinrich, M. A., Bansal, R., Lammers, T., Zhang, Y. S., Michel Schiffelers, R., & Prakash, J. (2019) · Advanced Materials · doi:10.1002/adma.201806590 · Cited by 317
Self-citationNoninvasive in vivo 3D bioprinting
Chen, Y., Zhang, J., Liu, X., Wang, S., Tao, J., Huang, Y., Wu, W., Li, Y., Zhou, K., Wei, X., et al. (2020) · Science Advances · doi:10.1126/sciadv.aba7406 · Cited by 316
In situ handheld three‐dimensional bioprinting for cartilage regeneration
Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313
Design and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review
Lee, J. M., & Yeong, W. Y. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600435 · Cited by 310
Active mixing of complex fluids at the microscale
Ober, T. J., Foresti, D., & Lewis, J. A. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509224112 · Cited by 306
3D Printed Stem‐Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds
Joung, D., Truong, V., Neitzke, C. C., Guo, S., Walsh, P. J., Monat, J. R., Meng, F., Park, S. H., Dutton, J. R., Parr, A. M., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801850 · Cited by 306
Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues
Pi, Q., Maharjan, S., Yan, X., Liu, X., Singh, B., van Genderen, A. M., Robledo‐Padilla, F., Parra‐Saldivar, R., Hu, N., Jia, W., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706913 · Cited by 305
Self-citationMulti-material stereolithography
Choi, J.-W., Kim, H.-C., & Wicker, R. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.10.003 · Cited by 303
3D bioprinted glioma stem cells for brain tumor model and applications of drug susceptibility
Dai, X., Ma, C., Lan, Q., & Xu, T. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045005 · Cited by 301
Principles of the Kenzan Method for Robotic Cell Spheroid-Based Three-Dimensional Bioprinting
Moldovan, N. I., Hibino, N., & Nakayama, K. (2017) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2016.0322 · Cited by 296
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Rodell, C. B., Dusaj, N. N., Highley, C. B., & Burdick, J. A. (2016) · Advanced Materials · doi:10.1002/adma.201602268 · Cited by 291
Tang, M., Xie, Q., Gimple, R. C., Zhong, Z., Tam, T., Tian, J., Kidwell, R. L., Wu, Q., Prager, B. C., Qiu, Z., et al. (2020) · Cell Research · doi:10.1038/s41422-020-0338-1 · Cited by 290
A multifunctional skin-like sensor based on a 3D printed thermo-responsive hydrogel
Lei, Z., Wang, Q., & Wu, P. (2017) · Materials Horizons · doi:10.1039/c7mh00262a · Cited by 288
Aspiration-assisted bioprinting for precise positioning of biologics
Ayan, B., Heo, D. N., Zhang, Z., Dey, M., Povilianskas, A., Drapaca, C., & Ozbolat, I. T. (2020) · Science Advances · doi:10.1126/sciadv.aaw5111 · Cited by 283
Direct 3D cell-printing of human skin with functional transwell system
Kim, B. S., Lee, J.-S., Gao, G., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c8 · Cited by 282
Liu, W., Zhong, Z., Hu, N., Zhou, Y., Maggio, L., Miri, A. K., Fragasso, A., Jin, X., Khademhosseini, A., & Zhang, Y. S. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9d44 · Cited by 280
Self-citationIngber, D. E. (2020) · Advanced Science · doi:10.1002/advs.202002030 · Cited by 277
Baltazar, T., Merola, J., Catarino, C., Xie, C. B., Kirkiles-Smith, N. C., Lee, V., Hotta, S., Dai, G., Xu, X., Ferreira, F. C., et al. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2019.0201 · Cited by 274
Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix
Yu, C., Ma, X., Zhu, W., Wang, P., Miller, K. L., Stupin, J., Koroleva-Maharajh, A., Hairabedian, A., & Chen, S. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.009 · Cited by 272
Advances and Future Perspectives in 4D Bioprinting
Ashammakhi, N., Ahadian, S., Zengjie, F., Suthiwanich, K., Lorestani, F., Orive, G., Ostrovidov, S., & Khademhosseini, A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800148 · Cited by 270
Acoustic Holographic Cell Patterning in a Biocompatible Hydrogel
Ma, Z., Holle, A. W., Melde, K., Qiu, T., Poeppel, K., Kadiri, V. M., & Fischer, P. (2020) · Advanced Materials · doi:10.1002/adma.201904181 · Cited by 269
Multifaceted Design and Emerging Applications of Tissue Adhesives
Ma, Z., Bao, G., & Li, J. (2021) · Advanced Materials · doi:10.1002/adma.202007663 · Cited by 269
Self-citationDigital material fabrication using mask‐image‐projection‐based stereolithography
Zhou, C., Chen, Y., Yang, Z., & Khoshnevis, B. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311312148 · Cited by 267
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Gao, Q., Liu, Z., Lin, Z., Qiu, J., Liu, Y., Liu, A., Wang, Y., Xiang, M., Chen, B., Fu, J., et al. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00643 · Cited by 267
3D Bioprinted in vitro metastatic models via reconstruction of tumor microenvironments
Meng, F., Meyer, C. M., Joung, D., Vallera, D. A., McAlpine, M. C., & Panoskaltsis‐Mortari, A. (2019) · Advanced Materials · doi:10.1002/adma.201806899 · Cited by 262
Handheld skin printer: in situ formation of planar biomaterials and tissues
Hakimi, N., Cheng, R., Leng, L., Sotoudehfar, M., Ba, P. Q., Bakhtyar, N., Amini-Nik, S., Jeschke, M. G., & Günther, A. (2018) · Lab on a Chip · doi:10.1039/c7lc01236e · Cited by 259
Bioinks and bioprinting: A focused review
Mobaraki, M., Ghaffari, M., Yazdanpanah, A., Luo, Y., & Mills, D. K. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00080 · Cited by 258
Shim, J.-H., Jang, K.-M., Hahn, S. K., Park, J. Y., Jung, H., Oh, K., Park, K. M., Yeom, J., Park, S. H., Kim, S. W., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014102 · Cited by 251
Bioprinting the Cancer Microenvironment
Zhang, Y. S., Duchamp, M., Oklu, R., Ellisen, L. W., Langer, R., & Khademhosseini, A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00246 · Cited by 248
Self-citationLim, K. S., Klotz, B. J., Lindberg, G. C. J., Melchels, F. P. W., Hooper, G. J., Malda, J., Gawlitta, D., & Woodfield, T. B. F. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900098 · Cited by 247
3D Printed Functional and Biological Materials on Moving Freeform Surfaces
Zhu, Z., Guo, S., Hirdler, T., Eide, C., Fan, X., Tolar, J., & McAlpine, M. C. (2018) · Advanced Materials · doi:10.1002/adma.201707495 · Cited by 245
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-Lopez, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 243
3D printing of complex GelMA-based scaffolds with nanoclay
Gao, Q., Niu, X., Shao, L., Zhou, L., Lin, Z., Sun, A., Fu, J., Chen, Z., Hu, J., Liu, Y., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0cf6 · Cited by 242
Proof-of-concept: 3D bioprinting of pigmented human skin constructs
Ng, W. L., Qi, J. T. Z., Yeong, W. Y., & Naing, M. W. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9e1e · Cited by 241
3D printing of biomimetic microstructures for cancer cell migration
Huang, T. Q., Qu, X., Liu, J., & Chen, S. (2014) · Biomedical Microdevices · doi:10.1007/s10544-013-9812-6 · Cited by 237
Effective bioprinting resolution in tissue model fabrication
Miri, A. K., Mirzaee, I., Hassan, S., Mesbah Oskui, S., Nieto, D., Khademhosseini, A., & Zhang, Y. S. (2019) · Lab on a Chip · doi:10.1039/c8lc01037d · Cited by 232
Self-citationBioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials
Kesti, M., Eberhardt, C., Pagliccia, G., Kenkel, D., Grande, D., Boss, A., & Zenobi‐Wong, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503423 · Cited by 228
Bioprinted thrombosis-on-a-chip
Zhang, Y. S., Davoudi, F., Walch, P., Manbachi, A., Luo, X., Dell'Erba, V., Miri, A. K., Albadawi, H., Arneri, A., Li, X., et al. (2016) · Lab on a Chip · doi:10.1039/c6lc00380j · Cited by 227
Self-citationEngineering Anisotropic Muscle Tissue using Acoustic Cell Patterning
Armstrong, J. P. K., Puetzer, J. L., Serio, A., Guex, A. G., Kapnisi, M., Breant, A., Zong, Y., Assal, V., Skaalure, S. C., King, O., et al. (2018) · Advanced Materials · doi:10.1002/adma.201802649 · Cited by 227
Optimization of collagen type I-hyaluronan hybrid bioink for 3D bioprinted liver microenvironments
Mazzocchi, A., Devarasetty, M., Huntwork, R., Soker, S., & Skardal, A. (2018) · Biofabrication · doi:10.1088/1758-5090/aae543 · Cited by 226
Jeon, O., Lee, Y. B., Jeong, H., Lee, S. J., Wells, D., & Alsberg, E. (2019) · Materials Horizons · doi:10.1039/c9mh00375d · Cited by 221
Design of capillary microfluidics for spinning cell-laden microfibers
Yu, Y., Shang, L., Guo, J., Wang, J., & Zhao, Y. (2018) · Nature Protocols · doi:10.1038/s41596-018-0051-4 · Cited by 218
Han, D., Yang, C., Fang, N. X., & Lee, H. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.031 · Cited by 216
Mao, Q., Wang, Y., Li, Y., Juengpanich, S., Li, W., Chen, M., Yin, J., Fu, J., & Cai, X. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.110625 · Cited by 215
Evaluation of bioink printability for bioprinting applications
Zhang, Z., Jin, Y., Yin, J., Xu, C., Xiong, R., Christensen, K., Ringeisen, B. R., Chrisey, D. B., & Huang, Y. (2018) · Applied Physics Reviews · doi:10.1063/1.5053979 · Cited by 214
Extrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs
Davoodi, E., Sarikhani, E., Montazerian, H., Ahadian, S., Costantini, M., Swieszkowski, W., Willerth, S. M., Walus, K., Mofidfar, M., Toyserkani, E., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201901044 · Cited by 213
Li, W., Mille, L. S., Robledo, J. A., Uribe, T., Huerta, V., & Zhang, Y. S. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000156 · Cited by 213
Self-citationReverse engineering human pathophysiology with organs-on-chips
Ingber, D. E. (2016) · Cell · doi:10.1016/j.cell.2016.02.049 · Cited by 212
Recent Advances in Enabling Technologies in 3D Printing for Precision Medicine
Prendergast, M. E., & Burdick, J. A. (2020) · Advanced Materials · doi:10.1002/adma.201902516 · Cited by 209
Autonomic perspiration in 3D-printed hydrogel actuators
Mishra, A. K., Wallin, T. J., Pan, W., Xu, A., Wang, K., Giannelis, E. P., Mazzolai, B., & Shepherd, R. F. (2020) · Science Robotics · doi:10.1126/scirobotics.aaz3918 · Cited by 207
Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates
Kim, J. D., Choi, J. S., Kim, B. S., Chan Choi, Y., & Cho, Y. W. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.038 · Cited by 206
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Arcaute, K., Mann, B., & Wicker, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.017 · Cited by 205
Zhu, Z., Park, H. S., & McAlpine, M. C. (2020) · Science Advances · doi:10.1126/sciadv.aba5575 · Cited by 200
A Tumor‐on‐a‐Chip System with Bioprinted Blood and Lymphatic Vessel Pair
Cao, X., Ashfaq, R., Cheng, F., Maharjan, S., Li, J., Ying, G., Hassan, S., Xiao, H., Yue, K., & Zhang, Y. S. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807173 · Cited by 198
Self-citationMaterials and technical innovations in 3D printing in biomedical applications
Tetsuka, H., & Shin, S. R. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00034e · Cited by 196
Foresti, D., Kroll, K. T., Amissah, R., Sillani, F., Homan, K. A., Poulikakos, D., & Lewis, J. A. (2018) · Science Advances · doi:10.1126/sciadv.aat1659 · Cited by 195
Spatially and temporally controlled hydrogels for tissue engineering
Leijten, J., Seo, J., Yue, K., Trujillo-de Santiago, G., Tamayol, A., Ruiz-Esparza, G. U., Shin, S. R., Sharifi, R., Noshadi, I., Álvarez, M. M., et al. (2017) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2017.07.001 · Cited by 192
Self-citationRoach, D. J., Hamel, C. M., Dunn, C. K., Johnson, M. V., Kuang, X., & Qi, H. J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100819 · Cited by 191
DLP printing photocurable chitosan to build bio-constructs for tissue engineering
Shen, Y., Tang, H., Huang, X., Hang, R., Zhang, X., Wang, Y., & Yao, X. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115970 · Cited by 191
The arrival of commercial bioprinters – Towards 3D bioprinting revolution!
Choudhury, D., Anand, S., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v4i2.139 · Cited by 189
Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography
Chan, V., Jeong, J. H., Bajaj, P., Collens, M., Saif, T., Kong, H., & Bashir, R. (2012) · Lab Chip · doi:10.1039/c1lc20688e · Cited by 188
Inkjet Bioprinting of 3D Silk Fibroin Cellular Constructs Using Sacrificial Alginate
Compaan, A. M., Christensen, K., & Huang, Y. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00432 · Cited by 188
Idaszek, J., Costantini, M., Karlsen, T. A., Jaroszewicz, J., Colosi, C., Testa, S., Fornetti, E., Bernardini, S., Seta, M., Kasarełło, K., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2622 · Cited by 188
Directly coaxial 3D bioprinting of large-scale vascularized tissue constructs
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., & He, Y. (2020) · Biofabrication · doi:10.1088/1758-5090/ab7e76 · Cited by 188
Laser Photofabrication of Cell-Containing Hydrogel Constructs
Ovsianikov, A., Mühleder, S., Torgersen, J., Li, Z., Qin, X.-H., Van Vlierberghe, S., Dubruel, P., Holnthoner, W., Redl, H., Liska, R., et al. (2014) · Langmuir · doi:10.1021/la402346z · Cited by 182
Bioprinting functional tissues
Leberfinger, A. N., Dinda, S., Wu, Y., Koduru, S. V., Ozbolat, V., Ravnic, D. J., & Ozbolat, I. T. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.009 · Cited by 180
3D printing of gelatin methacrylate-based nerve guidance conduits with multiple channels
Ye, W., Li, H., Yu, K., Xie, C., Wang, P., Zheng, Y., Zhang, P., Xiu, J., Yang, Y., Zhang, F., et al. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108757 · Cited by 180
Velasco-Rodriguez, B., Diaz-Vidal, T., Rosales-Rivera, L. C., García-González, C. A., Alvarez-Lorenzo, C., Al-Modlej, A., Domínguez-Arca, V., Prieto, G., Barbosa, S., Soltero Martínez, J. F. A., et al. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22136758 · Cited by 179
Void‐Free 3D Bioprinting for In Situ Endothelialization and Microfluidic Perfusion
Ouyang, L., Armstrong, J. P. K., Chen, Q., Lin, Y., & Stevens, M. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908349 · Cited by 175
Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers
Dai, X., Liu, L., Ouyang, J., Li, X., Zhang, X., Lan, Q., & Xu, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-01581-y · Cited by 173
A novel bioprinting method and system for forming hybrid tissue engineering constructs
Shanjani, Y., Pan, C. C., Elomaa, L., & Yang, Y. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045008 · Cited by 169
Bioprinting of 3D breast epithelial spheroids for human cancer models
Swaminathan, S., Hamid, Q., Sun, W., & Clyne, A. M. (2019) · Biofabrication · doi:10.1088/1758-5090/aafc49 · Cited by 167
Functionalizing bioinks for 3D bioprinting applications
Parak, A., Pradeep, P., du Toit, L. C., Kumar, P., Choonara, Y. E., & Pillay, V. (2019) · Drug Discovery Today · doi:10.1016/j.drudis.2018.09.012 · Cited by 166
Bioprinting Perfusion-Enabled Liver Equivalents for Advanced Organ-on-a-Chip Applications
Grix, T., Ruppelt, A., Thomas, A., Amler, A.-K., Noichl, B. P., Lauster, R., & Kloke, L. (2018) · Genes · doi:10.3390/genes9040176 · Cited by 165
Heralding a new paradigm in 3D tumor modeling
Fong, E. L. S., Harrington, D. A., Farach‐Carson, M. C., & Yu, H. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.08.052 · Cited by 164
Bioprinting of Multiscaled Hepatic Lobules within a Highly Vascularized Construct
Kang, D., Hong, G., An, S., Jang, I., Yun, W., Shim, J., & Jin, S. (2020) · Small · doi:10.1002/smll.201905505 · Cited by 164
Madden, L. R., Nguyen, T. V., Garcia-Mojica, S., Shah, V., Le, A. V., Peier, A. M., Visconti, R. J., Parker, E. M., Presnell, S. C., Nguyen, D. G., et al. (2018) · iScience · doi:10.1016/j.isci.2018.03.015 · Cited by 162
Kowsari, K., Akbari, S., Wang, D., Fang, N. X., & Ge, Q. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0004 · Cited by 162
Kim, S., Kim, D. Y., Roh, H.-H., Kim, H. S., Lee, J. W., & Lee, K. Y. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.8b01589 · Cited by 162
Fiber‐Based Mini Tissue with Morphology‐Controllable GelMA Microfibers
Shao, L., Gao, Q., Zhao, H., Xie, C., Fu, J., Liu, Z., Xiang, M., & He, Y. (2018) · Small · doi:10.1002/smll.201802187 · Cited by 161
Microfluidic bioprinting for organ-on-a-chip models
Yu, F., & Choudhury, D. (2019) · Drug Discovery Today · doi:10.1016/j.drudis.2019.03.025 · Cited by 160
High‐Resolution Projection Microstereolithography for Patterning of Neovasculature
Raman, R., Bhaduri, B., Mir, M., Shkumatov, A., Lee, M. K., Popescu, G., Kong, H., & Bashir, R. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500721 · Cited by 159
Fabricating hydrogels to mimic biological tissues of complex shapes and high fatigue resistance
Yang, H., Ji, M., Yang, M., Shi, M., Pan, Y., Zhou, Y., Qi, H. J., Suo, Z., & Tang, J. (2021) · Matter · doi:10.1016/j.matt.2021.03.011 · Cited by 159
Park, J., Lee, S. J., Chung, S., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.069 · Cited by 158
Kizawa, H., Nagao, E., Shimamura, M., Zhang, G., & Torii, H. (2017) · Biochemistry and Biophysics Reports · doi:10.1016/j.bbrep.2017.04.004 · Cited by 156
Norona, L. M., Nguyen, D. G., Gerber, D. A., Presnell, S. C., & LeCluyse, E. L. (2016) · Toxicological Sciences · doi:10.1093/toxsci/kfw169 · Cited by 153
Resolution and shape in bioprinting: Strategizing towards complex tissue and organ printing
Lee, J. M., Ng, W. L., & Yeong, W. Y. (2019) · Applied Physics Reviews · doi:10.1063/1.5053909 · Cited by 153
Coaxial bioprinting of cell-laden vascular constructs using a gelatin–tyramine bioink
Hong, S., Kim, J. S., Jung, B.-Y., Won, C. H., & Hwang, C. (2019) · Biomaterials Science · doi:10.1039/c8bm00618k · Cited by 148
Bioinspired Microfibers with Embedded Perfusable Helical Channels
Xu, P., Xie, R., Liu, Y., Luo, G., Ding, M., & Liang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201701664 · Cited by 145
Jiang, T., Munguia-López, J. G., Flores-Torres, S., Grant, J., Vijayakumar, S., León‐Rodríguez, A. D., & Kinsella, J. M. (2017) · Scientific Reports · doi:10.1038/s41598-017-04691-9 · Cited by 141
Stereolithography 3D Bioprinting
Kumar, H., & Kim, K. (2020) · Methods in molecular biology · doi:10.1007/978-1-0716-0520-2_6 · Cited by 141
A bioink blend for rotary 3D bioprinting tissue engineered small-diameter vascular constructs
Freeman, S. R., Ramos, R., Chando, P. A., Zhou, L., Reeser, K., Jin, S., Soman, P., & Ye, K. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.052 · Cited by 140
Bioprinting of a functional vascularized mouse thyroid gland construct
Bulanova, E. A., Koudan, E. V., Degosserie, J., Heymans, C., Pereira, F. D. A. S., Parfenov, V. A., Sun, Y. N., Wang, Q., Akhmedova, S. A., Sviridova, I. K., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7fdd · Cited by 139
Research works printed but not linked: 26
- Zhang Y. S., 2018, Perspect. Med., 8
- 10.1126/sciadv.aas8652 · doi:10.1126/sciadv.aas8652
- 10.1039/C9LC00419J · doi:10.1039/c9lc00419j
- 10.1016/j.msec.2019.109861 · DOI
- 10.1038/s41598-020-62443-8 · doi:10.1038/s41598-020-62443-8
- 10.1002/smll.201906402 · doi:10.1002/smll.201906402
- 10.1002/adem.201900147 · DOI
- 10.1039/C6LC00636A · doi:10.1039/c6lc00636a
- 10.1039/C9LC00546C · DOI
- 10.1002/adma.201904209 · DOI · Paper page
- Zhou C., 2011, Annu. Solid Freeform Fabr. Symp., 3, 65
- 10.1108/RPJ-07-2017-0144 · doi:10.1108/rpj-07-2017-0144
- 10.2351/1.5096106 · doi:10.2351/1.5096106
- 10.1002/9783527805105 · doi:10.1002/9783527805105
- 10.1038/nbt.3413 · DOI · Paper page
- 10.1101/2021.03.25.436898 · doi:10.1101/2021.03.25.436898
- 10.1109/MSPEC.2019.8678515 · doi:10.1109/mspec.2019.8678515
- 10.1089/ten.tea.2020.0191 · DOI
- 10.1038/s41598-018-21681-7 · doi:10.1038/s41598-018-21681-7
- 10.1002/advs.202001854 · doi:10.1002/advs.202001854
- 10.1002/advs.201900344 · DOI · Paper page
- Pashazadeh A., 2019, Trans. Addit. Manuf. Meets Med., 1
- 10.1089/ten.tec.2017.0056 · doi:10.1089/ten.tec.2017.0056
- Liu X., 2020, J. Biomed. Mater. Res., Part A
- 10.1101/2020.04.06.028548 · doi:10.1101/2020.04.06.028548
- C. Kanani Cell printing: a novel method to seed cells onto biological scaffolds M.Sc. Thesis Worcester Polytechnic Institute2012.
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Self-citationBone Tissue Engineering Scaffolds: Function of Multi‐Material Hierarchically Structured Scaffolds
Koushik, T. M., Miller, C. M., & Antunes, E. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202202766 · Cited by 359
Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review
Fatimi, A., Okoro, O. V., Podstawczyk, D., Siminska-Stanny, J., & Shavandi, A. (2022) · Gels · doi:10.3390/gels8030179 · Cited by 276
In Situ 3D Bioprinting Living Photosynthetic Scaffolds for Autotrophic Wound Healing
Wang, X., Yang, C., Yu, Y., & Zhao, Y. (2022) · Research · doi:10.34133/2022/9794745 · Cited by 143
Metadata
- Authors
- Ravanbakhsh, H., Karamzadeh, V., Bao, G., Mongeau, L., Juncker, D., & Zhang, Y. S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-10
- Volume
- 33
- Issue
- 49
- Pages
- e2104730-e2104730
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3204873255
- Cited by
- 266
- References
- 313
- FWCI
- 10.57
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- Funders
- National Institutes of Health (R01DC018577, R01DC005788, R01DC014461, R21EB025270, R21EB026175, R00CA201603, R01EB028143, R01HL153857, R21EB030257)
- National Science Foundation (CBET‐EBMS‐1936105)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.