The DOI matches its Crossref record; 100 of the 100 references it cites were found in a registry or an index.
Advances in SnO2 for Efficient and Stable n–i–p Perovskite Solar Cells
Abstract
Perovskite solar cells (PSCs) based on the regular n–i–p device architecture have reached above 25% certified efficiency with continuously reported improvements in recent years. A key common factor for these recent breakthroughs is the development of SnO 2 as an effective electron transport layer in these devices. In this article, the key advances in SnO 2 development are reviewed, including various deposition approaches and surface treatment strategies, to enhance the bulk and interface properties of SnO 2 for highly efficient and stable n–i–p PSCs. In addition, the general materials chemistry associated with SnO 2 along with the corresponding materials challenges and improvement strategies are discussed, focusing on defects, intrinsic properties, and impact on device characteristics. Finally, some SnO 2 implementations related to scalable processes and flexible devices are highlighted, and perspectives on the future development of efficient and stable large‐scale perovskite solar modules are also provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Efficient perovskite solar cells via improved carrier management
Yoo, J. J., Seo, G., Chua, M. R., Park, T. G., Lu, Y., Rotermund, F., Kim, Y.-K., Moon, C. S., Jeon, N. J., Correa-Baena, J.-P., et al. (2021) · Nature · doi:10.1038/s41586-021-03285-w · Cited by 2,934
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
Yang, D., Yang, R., Wang, K., Wu, C., Zhu, X., Feng, J., Ren, X., Fang, G., Priya, S., & Liu, S. (2018) · Nature Communications · doi:10.1038/s41467-018-05760-x · Cited by 1,401
Conformal quantum dot–SnO 2 layers as electron transporters for efficient perovskite solar cells
Kim, M., Jeong, J., Lu, H., Lee, T. K., Eickemeyer, F. T., Liu, Y., Choi, I. W., Choi, S. J., Jo, Y., Kim, H.-B., et al. (2022) · Science · doi:10.1126/science.abh1885 · Cited by 1,346
Highly efficient planar perovskite solar cells through band alignment engineering
Correa Baena, J. P., Steier, L., Tress, W., Saliba, M., Neutzner, S., Matsui, T., Giordano, F., Jacobsson, T. J., Srimath Kandada, A. R., Zakeeruddin, S. M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02608c · Cited by 1,265
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
Ke, W., Fang, G., Liu, Q., Xiong, L., Qin, P., Tao, H., Wang, J., Lei, H., Li, B., Wan, J., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b01994 · Cited by 1,228
SnO2: A comprehensive review on structures and gas sensors
Das, S., & Jayaraman, V. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.06.003 · Cited by 1,226
Strain engineering in perovskite solar cells and its impacts on carrier dynamics
Zhu, C., Niu, X., Fu, Y., Li, N., Hu, C., Chen, Y., He, X., Na, G., Liu, P., Zai, H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08507-4 · Cited by 1,042
Stolterfoht, M., Caprioglio, P., Wolff, C. M., Márquez, J. A., Nordmann, J., Zhang, S., Rothhardt, D., Hörmann, U., Amir, Y., Redinger, A., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02020a · Cited by 966
Origins of Coexistence of Conductivity and Transparency inSnO2
Kılıç, Ç., & Zunger, A. (2002) · Physical Review Letters · doi:10.1103/physrevlett.88.095501 · Cited by 926
SnO2: A Wonderful Electron Transport Layer for Perovskite Solar Cells
Jiang, Q., Zhang, X., & You, J. (2018) · Small · doi:10.1002/smll.201801154 · Cited by 924
Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide
Anaraki, E. H., Kermanpur, A., Steier, L., Domanski, K., Matsui, T., Tress, W., Saliba, M., Abate, A., Grätzel, M., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02390h · Cited by 848
Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability
Christians, J. A., Schulz, P., Tinkham, J. S., Schloemer, T. H., Harvey, S. P., Tremolet de Villers, B. J., Sellinger, A., Berry, J. J., & Luther, J. M. (2018) · Nature Energy · doi:10.1038/s41560-017-0067-y · Cited by 828
Bu, T., Li, J., Zheng, F., Chen, W., Wen, X., Ku, Z., Peng, Y., Zhong, J., Cheng, Y.-B., & Huang, F. (2018) · Nature Communications · doi:10.1038/s41467-018-07099-9 · Cited by 815
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells
Zuo, L., Guo, H., deQuilettes, D. W., Jariwala, S., De Marco, N., Dong, S., DeBlock, R., Ginger, D. S., Dunn, B., Wang, M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700106 · Cited by 749
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Acidic and basic properties of hydroxylated metal oxide surfaces
Boehm, H. P. (1971) · Discussions of the Faraday Society · doi:10.1039/df9715200264 · Cited by 628
Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability
Dai, Z., Yadavalli, S. K., Chen, M., Abbaspourtamijani, A., Qi, Y., & Padture, N. P. (2021) · Science · doi:10.1126/science.abf5602 · Cited by 625
Li, W., Zhang, W., Van Reenen, S., Sutton, R. J., Fan, J., Haghighirad, A. A., Johnston, M. B., Wang, L., & Snaith, H. J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03522h · Cited by 615
Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth
Jang, Y.-W., Lee, S., Yeom, K. M., Jeong, K., Choi, K., Choi, M., & Noh, J. H. (2021) · Nature Energy · doi:10.1038/s41560-020-00749-7 · Cited by 605
Solar cell efficiency tables (version 56)
Green, M. A., Dunlop, E. D., Hohl‐Ebinger, J., Yoshita, M., Kopidakis, N., & Hao, X. (2020) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3303 · Cited by 565
Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability
Wang, H., Zhu, C., Liu, L., Ma, S., Liu, P., Wu, J., Shi, C., Du, Q., Hao, Y., Xiang, S., et al. (2019) · Advanced Materials · doi:10.1002/adma.201904408 · Cited by 499
Park, M., Kim, J.-Y., Son, H. J., Lee, C.-H., Jang, S. S., & Ko, M. J. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.060 · Cited by 496
New-generation integrated devices based on dye-sensitized and perovskite solar cells
Yun, S., Qin, Y., Uhl, A. R., Vlachopoulos, N., Yin, M., Li, D., Han, X., & Hagfeldt, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03165c · Cited by 478
The Role of the Interfaces in Perovskite Solar Cells
Shao, S., & Loi, M. A. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.201901469 · Cited by 477
Physical Properties of SnO2 Materials: I . Preparation and Defect Structure
Jarzebski, Z. M., & Marton, J. (1976) · Journal of The Electrochemical Society · doi:10.1149/1.2133010 · Cited by 472
Zhu, P., Gu, S., Luo, X., Gao, Y., Li, S., Zhu, J., & Tan, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903083 · Cited by 467
Thermally stable, planar hybrid perovskite solar cells with high efficiency
Choi, K., Lee, J., Kim, H. I., Park, C. W., Kim, G.-W., Choi, H., Park, S., Park, S. A., & Park, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02242a · Cited by 458
Self-citationFlexible Perovskite Solar Cells
Jung, H. S., Han, G. S., Park, N.-G., & Ko, M. J. (2019) · Joule · doi:10.1016/j.joule.2019.07.023 · Cited by 449
Yang, G., Wang, C., Lei, H., Zheng, X., Qin, P., Xiong, L., Zhao, X., Yan, Y., & Fang, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08783c · Cited by 437
Charge Carrier Separation in Solar Cells
Würfel, U., Cuevas, A., & Würfel, P. (2014) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2014.2363550 · Cited by 429
Yang, G., Chen, C., Yao, F., Chen, Z., Zhang, Q., Zheng, X., Ma, J., Lei, H., Qin, P., Xiong, L., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706023 · Cited by 411
Liu, Z., Qiu, L., Ono, L. K., He, S., Hu, Z., Jiang, M., Tong, G., Wu, Z., Jiang, Y., Son, D.-Y., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0653-2 · Cited by 395
Xiong, Z., Chen, X. D., Zhang, B., Odunmbaku, G. O., Ou, Z., Guo, B., Yang, K., Kan, Z., Lu, S., Chen, S., et al. (2021) · Advanced Materials · doi:10.1002/adma.202106118 · Cited by 392
Bifunctional Surface Engineering on SnO2 Reduces Energy Loss in Perovskite Solar Cells
Jung, E. H., Chen, B., Bertens, K., Vafaie, M., Teale, S., Proppe, A., Hou, Y., Zhu, T., Zheng, C., & Sargent, E. H. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01566 · Cited by 389
Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells
Zuo, L., Chen, Q., De Marco, N., Hsieh, Y.-T., Chen, H., Sun, P., Chang, S.-Y., Zhao, H., Dong, S., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04015 · Cited by 373
Song, J., Zheng, E., Bian, J., Wang, X.-F., Tian, W., Sanehira, Y., & Miyasaka, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01207d · Cited by 366
Solvent Engineering of the Precursor Solution toward Large‐Area Production of Perovskite Solar Cells
Chao, L., Niu, T., Gao, W., Ran, C., Song, L., Chen, Y., & Huang, W. (2021) · Advanced Materials · doi:10.1002/adma.202005410 · Cited by 354
Tin Oxide Electron‐Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells
Altinkaya, C., Aydin, E., Ugur, E., Isikgor, F. H., Subbiah, A. S., De Bastiani, M., Liu, J., Babayigit, A., Allen, T. G., Laquai, F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005504 · Cited by 348
Correa-Baena, J.-P., Tress, W., Domanski, K., Anaraki, E. H., Turren-Cruz, S.-H., Roose, B., Boix, P. P., Grätzel, M., Saliba, M., Abate, A., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00421d · Cited by 338
Stable Large‐Area (10 × 10 cm2) Printable Mesoscopic Perovskite Module Exceeding 10% Efficiency
Hu, Y., Si, S., Mei, A., Rong, Y., Liu, H., Li, X., & Han, H. (2017) · Solar RRL · doi:10.1002/solr.201600019 · Cited by 328
Hui, W., Yang, Y., Xu, Q., Gu, H., Feng, S., Su, Z., Zhang, M., Wang, J., Li, X., Fang, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906374 · Cited by 316
Hysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency
Yoon, H., Kang, S. M., Lee, J.-K., & Choi, M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01037g · Cited by 302
Dong, Q., Zhu, C., Chen, M., Jiang, C., Guo, J., Feng, Y., Dai, Z., Yadavalli, S. K., Hu, M., Cao, X., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-21292-3 · Cited by 299
Rubidium Fluoride Modified SnO2 for Planar n‐i‐p Perovskite Solar Cells
Zhuang, J., Mao, P., Luan, Y., Chen, N., Cao, X., Niu, G., Jia, F., Wang, F., Cao, S., & Wang, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010385 · Cited by 272
Fullerene derivative anchored SnO2 for high-performance perovskite solar cells
Liu, K., Chen, S., Wu, J., Zhang, H., Qin, M., Lu, X., Tu, Y., Meng, Q., & Zhan, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02172d · Cited by 261
Wang, C., Zhao, D., Grice, C. R., Liao, W., Yu, Y., Cimaroli, A., Shrestha, N., Roland, P. J., Chen, J., Yu, Z., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04503k · Cited by 250
Mesoporous SnO2 electron selective contact enables UV-stable perovskite solar cells
Roose, B., Baena, J.-P. C., Gödel, K. C., Graetzel, M., Hagfeldt, A., Steiner, U., & Abate, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.10.055 · Cited by 250
Ganose, A. M., & Scanlon, D. O. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc04089b · Cited by 246
Insight into Perovskite Solar Cells Based on SnO2 Compact Electron-Selective Layer
Dong, Q., Shi, Y., Wang, K., Li, Y., Wang, S., Zhang, H., Xing, Y., Du, Y., Bai, X., & Ma, T. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b00541 · Cited by 232
Ke, W., Zhao, D., Cimaroli, A. J., Grice, C. R., Qin, P., Liu, Q., Xiong, L., Yan, Y., & Fang, G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06574g · Cited by 224
Band Gap Engineering of SnO2 by Epitaxial Strain: Experimental and Theoretical Investigations
Zhou, W., Liu, Y., Yang, Y., & Wu, P. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500546r · Cited by 210
Ding, C., Zhang, Y., Liu, F., Kitabatake, Y., Hayase, S., Toyoda, T., Yoshino, K., Minemoto, T., Katayama, K., & Shen, Q. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.031 · Cited by 209
Barbé, J., Tietze, M. L., Neophytou, M., Murali, B., Alarousu, E., Labban, A. E., Abulikemu, M., Yue, W., Mohammed, O. F., McCulloch, I., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13675 · Cited by 207
MgO Nanoparticle Modified Anode for Highly Efficient SnO2‐Based Planar Perovskite Solar Cells
Ma, J., Yang, G., Qin, M., Zheng, X., Lei, H., Chen, C., Chen, Z., Guo, Y., Han, H., Zhao, X., et al. (2017) · Advanced Science · doi:10.1002/advs.201700031 · Cited by 203
Chen, Y., Meng, Q., Zhang, L., Han, C., Gao, H., Zhang, Y., & Yan, H. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2018.11.011 · Cited by 197
Dye-Sensitized Solid-State Heterojunction Solar Cells
Grätzel, M. (2005) · MRS Bulletin · doi:10.1557/mrs2005.4 · Cited by 196
Tu, B., Shao, Y., Chen, W., Wu, Y., Li, X., He, Y., Li, J., Liu, F., Zhang, Z., Lin, Y., et al. (2019) · Advanced Materials · doi:10.1002/adma.201805944 · Cited by 196
Effect of Cation Composition on the Mechanical Stability of Perovskite Solar Cells
Rolston, N., Printz, A. D., Tracy, J. M., Weerasinghe, H. C., Vak, D., Haur, L. J., Priyadarshi, A., Mathews, N., Slotcavage, D. J., McGehee, M. D., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702116 · Cited by 194
Quasi-Fermi level splitting and sub-bandgap absorptivity from semiconductor photoluminescence
Katahara, J. K., & Hillhouse, H. W. (2014) · Journal of Applied Physics · doi:10.1063/1.4898346 · Cited by 190
Multifunctional Conjugated Ligand Engineering for Stable and Efficient Perovskite Solar Cells
Ma, K., Atapattu, H. R., Zhao, Q., Gao, Y., Finkenauer, B. P., Wang, K., Chen, K., Park, S. M., Coffey, A. H., Zhu, C., et al. (2021) · Advanced Materials · doi:10.1002/adma.202100791 · Cited by 186
Self-citationWang, C., Guan, L., Zhao, D., Yu, Y., Grice, C. R., Song, Z., Awni, R. A., Chen, J., Wang, J., Zhao, X., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00644 · Cited by 184
Insights into Fullerene Passivation of SnO2 Electron Transport Layers in Perovskite Solar Cells
Wang, J., Datta, K., Weijtens, C. H. L., Wienk, M. M., & Janssen, R. A. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905883 · Cited by 174
Precursor Engineering for a Large-Area Perovskite Solar Cell with >19% Efficiency
Lee, D.-K., Jeong, D.-N., Ahn, T. K., & Park, N.-G. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01735 · Cited by 170
Jung, K.-H., Seo, J.-Y., Lee, S., Shin, H., & Park, N.-G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08040a · Cited by 164
Advances in SnO 2 -based perovskite solar cells: from preparation to photovoltaic applications
Wu, P., Wang, S., Li, X., & Zhang, F. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta04130d · Cited by 152
Photocatalytic Self‐Doped SnO2−x Nanocrystals Drive Visible‐Light‐Responsive Color Switching
Han, D., Jiang, B., Feng, J. C., Yin, Y., & Wang, W. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702563 · Cited by 143
Influence of Charge Transport Layers on Capacitance Measured in Halide Perovskite Solar Cells
Awni, R. A., Song, Z., Chen, C., Li, C., Wang, C., Razooqi, M. A., Chen, L., Wang, X., Ellingson, R. J., Li, J. V., et al. (2020) · Joule · doi:10.1016/j.joule.2020.01.012 · Cited by 137
Hou, M., Zhang, H., Wang, Z., Xia, Y., Chen, Y., & Huang, W. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b10332 · Cited by 130
Stability Comparison of Perovskite Solar Cells Based on Zinc Oxide and Titania on Polymer Substrates
Dkhissi, Y., Meyer, S., Chen, D., Weerasinghe, H. C., Spiccia, L., Cheng, Y., & Caruso, R. A. (2016) · ChemSusChem · doi:10.1002/cssc.201501659 · Cited by 115
Li, Z., Wang, L., Liu, R., Fan, Y., Meng, H., Shao, Z., Cui, G., & Pang, S. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902142 · Cited by 98
Increasing efficiency of perovskite solar cells using low concentrating photovoltaic systems
Baig, H., Kanda, H., Asiri, A. M., et al. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00550a · Cited by 97
Subbiah, A. S., Mathews, N., Mhaisalkar, S. G., & Sarkar, S. K. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00692 · Cited by 96
Tong, G., Ono, L. K., Liu, Y., Zhang, H., Bu, T., & Qi, Y. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00675-7 · Cited by 92
Han, G. S., Kim, J., Bae, S., Han, S., Kim, Y., Gong, O. Y., Lee, P., Ko, M. J., & Jung, H. S. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00953 · Cited by 84
Bu, T., Liu, X., Li, J., et al. (2019) · Solar RRL · doi:10.1002/solr.201900263 · Cited by 83
Hang, P., Xie, J., Li, G., Wang, Y., Fang, D., Yao, Y., Xie, D., Cui, C., Yan, K., Xu, J., et al. (2019) · iScience · doi:10.1016/j.isci.2019.10.021 · Cited by 74
Toward Highly Thermal Stable Perovskite Solar Cells by Rational Design of Interfacial Layer
Yang, W., Zhong, D., Shi, M., Qu, S., & Chen, H. (2019) · iScience · doi:10.1016/j.isci.2019.11.007 · Cited by 64
Zhang, J., Bai, C., Yao, D., Shen, W., Zhang, Q., Huang, F., Cheng, Y., & Zhong, J. P. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131444 · Cited by 62
Xie, G., Lu, X., Duan, J., Yan, D., Jiang, X.-R., Tu, F., Duan, Y., & Tang, Q. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta02672k · Cited by 55
La-doped BaSnO 3 electron transport layer for perovskite solar cells
Myung, C. W., Lee, G., & Kim, K. S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08764d · Cited by 54
Exploring and controlling intrinsic defect formation in SnO 2 thin films
Porte, Y., Maller, R., Faber, H. A., Alshareef, H. N., Anthopoulos, T. D., & McLachlan, M. A. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc03520a · Cited by 52
Shi, Y., Zhang, H., Tong, X., Hou, X., Li, F., Du, Y., Wang, S., Zhang, Q., Liu, P., & Zhao, X. (2021) · Solar RRL · doi:10.1002/solr.202100128 · Cited by 49
Mali, S. S., Patil, J. V., Arandiyan, H., & Hong, C. K. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05422g · Cited by 48
Zhang, M., Wu, F., Chi, D., Shi, K., & Huang, S. (2020) · Materials Advances · doi:10.1039/d0ma00028k · Cited by 46
Metal Oxide-Induced Instability and Its Mitigation in Halide Perovskite Solar Cells
Thampy, S., Xu, W., & Hsu, J. W. P. (2021) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.1c02371 · Cited by 45
Park, S. Y., Baek, M. Y., Ju, Y., Kim, D. H., Moon, C. S., Noh, J. H., & Jung, H. S. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b02408 · Cited by 35
Self-citationEpifani, M., Arbiol, J., Andreu, T., & Morante, J. R. (2007) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.200700946 · Cited by 14
Cited by
Li, M., Liu, M., Qi, F., Lin, F. R., & Jen, A. K.-Y. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00396 · Cited by 642
Rapid advances enabling high-performance inverted perovskite solar cells
Jiang, Q., & Zhu, K. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00678-x · Cited by 410
Self-citation
Metadata
- Authors
- Park, S. Y., & Zhu, K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-04-24
- Volume
- 34
- Issue
- 27
- Pages
- e2110438-e2110438
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4221014473
- Cited by
- 476
- References
- 100
- FWCI
- 26.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.